ALL NEW! Instructional Video DIY Fingerboard Mold Kit & Printed Veneer - How To Make A Fingerboard -

[@punkfingerboards6283]

Complete kits with veneer, trucks, wheels and more available on Amazon: www.amazon.com/s?me=A1Q6ZAR9LZL0F1&marketplaceID=ATVPDKIKX0DER Order early, we are expecting a heavy Christmas season!

[@littledoodle5689]

this is so beautiful idk why. a lil hobby yet so intricate in its art. life can be so beautiful

[@poindexter707]

Thank you for this. A list of items needed would really help. saved liked and subscribed, keep up the great work

[@Dyl-XL]

Best mold I've got so far. The brass inserts for hole drilling is literally everything. I kept making nice boards with janky holes before this. Thanks!

[@TimberCreekFingerboards]

How do you keep the mold in place when drilling? I'm almost thinking I'll have to put it in the vice sideways as I ruined both boards and I made 100 before this one with two $13 molds, so top and bottom moved as holding it

[@alyssaduong1635]

great job punk fingerboards,by far one of the best molds mold set out there and great detailed instructional video

[@punkfingerboards6283]

Thank you so much!

[@NuteIlaTaco]

How do you put graphics on the veneer like that?

[@aShamelessHigh]

1st comment of 2024 baby 🎉

[@gutterfingers]

mines coming in today, cant wait to start making some clean decks finally

[@Nothingness2345]

Hey do you like the mold?

[@Mrwigglyau]

any chance of a video showing how to set the router guard up? looks a lot easier then the belt sander.

[@Papalaessa]

Amazing videos bro

[@phrogginator]

Haha, it’s Spike, I wanna win that setup ! Also first commenter for this on here

[@cruzcruz3772]

PUNK FINGERBOARDS ROCK

[@Indeepthoughtmusic]

Where did you get your wood router from???

[@EEE-cd3yc]

Is there another way to get a graphic on the veneer

[@N-VAMusic]

Incredibly detailed and concise nice work

[@jonkillings2747]

Can I use just an ordinary electric belt sander? And what is that router thing called? I'm trying to set everything up before the mold arrives.

[@punkfingerboards6283]

Regular belt sander would work fine. The router in the video is a cheap Ridgid laminate trim router mounted on a board with a 2x4 as a fence, using a bottom bearing flush trim bit. Crude yes...but works great for routing fingerboards. Search "how to use a router with a router table"..."diy router table"... Be safe!

[@animodeoh]

Items are out of stock. Is there an estimated time they will become available?

[@punkfingerboards6283]

Fully back in stock....eBay, Etsy, and Amazon.

[@laurenjadeyting204]

sir can i ask what toolds you use for shaping

[@Papalaessa]

How i can put the grafic in the venner bro?

[@maltisse]

Awesome I've been looking for a good mood set. Great video as well. Ty.

[@gusmorrusmorris1845]

i need a new set up but have really been wanting to make my own! thank you!

[@tylerjones934]

Hi punk fingerboards great job on the fingerboard shapes have you thought of making miniature 1/8 scale longboards just an idea I like old schools they are my favorite s

[@punkfingerboards6283]

I always wanted to have a mini replica of an early quicksilver longboard with aluminum stripes...maybe I'll put that on the list..

[@tylerjones934]

Cool man

[@liampowell3554]

Just got done making mine and it’s great 🔥

[@Aross846]

So how many boards can I make

[@punkfingerboards6283]

I still use the first two molds I made. They can last indefinitely and make hundreds of boards if used and stored properly (keep dry and cool).

[@arutube7212]

Very cool 🤘 from japan!

[@punkfingerboards6283]

Thank you friend!

[@Angrygamingmidget]

Question can you use the shaper on a sander ?

[@theRhinsRanger]

I would not recommend doing that as you might sand the shaper by mistake one time. The reason it can be used on a table router is because the router bit has a bearing around it stopping you from carving out the shaper by mistake

[@Aross846]

What thickness is the veneer

[@punkfingerboards6283]

The veneer is .5mm. Woodcraft link to the veneer we use: www.woodcraft.com/products/maple-veneer-12-sq-ft-pack

[@Aross846]

Thank you so much I got the mold kit and was buying more veneer to make more boards so I now have the right kind

[@Djmat8]

i have just recieved my 32mm mold. i am quite impressed compared to my other brand mold. the metal guides make it very professional too. the bottom of the template seems to be a fraction of a mm larger , i was wondering if that was for the router bit to not bite the plastic? or if the bearing sit higher will it have a chance to cut off the template?

[@punkfingerboards6283]

Hello. The fingerboard blank should be flush with the template after routing, if that's the case you're good to go. If the blank is hanging over either side or end(s) and you can feel a lip because it is slightly larger than the template, take a fine file or sanding block to the bottom of the template and remove that small ridge of plastic in the overhang area so the router bearing can cut more flush with the shape. This is super easy and will allow you to fine tune your template. We do this in the shop before shipping, but yours might need some finer tuning. You can email us direct at [e-mail] if you are still having trouble or have any additional questions.

[@Djmat8]

@@punkfingerboards6283 ill defenitly buy the oldschool mold in a near futur. i bought na small dremel router table with a miniature 3/16 large bearring flush trim. the problem with a dremel table is that since the dremel is only screw to the table if you push hard the bit can move a bit from right to left. and if it is not 100 percent perpendicular to the table surface i am scared that the shapers gets chewed a bit. i might put a small layer of tape around the template to make a test first. or buy a better professional router table. keep up the good work and looking forward for other shapers shapes :D

[@APlusModding]

Can you link the triangle cutting bit for doing countersink holes as well as the vice please?

[@punkfingerboards6283]

Dremil #125 Cutter Bit : www.ebay.com/itm/382374641137

[@APlusModding]

@@punkfingerboards6283 Thanks much appreciated

[@Djmat8]

just ordered this mould! cant wait to try it. if satisfied i will eventually order the oldschool kit too. why dont you recommend using a drill press? i have a dremel hooked on to a dremel workstation to drill straight holes

[@punkfingerboards6283]

Holding the mold and the drill at the same time allows for the drill to float with the guide and sort of find it's way, it's really fast and easy. If you use a drill press use slow rpm, and hold the mold loosely until the guide does it's job, don't force it in a clamped mold, or you could drill the brass out if you are off.

[@chrisfumero8083]

I am trying to choose which mold i want to buy the high kick or normal one and i was wondering what mold was used for the board shown off at the end of the video?

[@punkfingerboards6283]

Hello. The mold used in this video is the regular kick, with a 34mm template. eBay: www.ebay.com/itm/303137353942 Amazon: www.amazon.com/gp/product/B084D1TB9R Etsy: www.etsy.com/listing/687974186/improved-pro-34mm-fingerboard-mold-kit?ref=shop_home_active_9&frs=1&crt=1

[@Djmat8]

sometimes when i open up my mold the top and bottom plys sometimes have blueish/black stains on the wood, some kind of reaction. i use gorilla wood glue. have you ever experienced something like that

[@punkfingerboards6283]

I would try using less glue, and make sure to use the wax paper/foam. I have not tried Gorilla Glue.

[@jellyboy1112]

Is that dremel bit compatible with any Milwaukee driller?

[@punkfingerboards6283]

Yeah for sure. It has a 1/4" cutter head and a 6.4mm shank. Should fit in all cordless drills.

[@jellyboy1112]

@@punkfingerboards6283 so even without the pentagon shape that has to fit in my Milwaukee drill. It with fit?

[@punkfingerboards6283]

@@jellyboy1112 Yeah not a problem, the shank will work in Milwaukie drills just fine. Larger round shanked drill bits that require pressure while using can slip sometimes, but this job is easy, really don't have to apply much pressure at all, I have never had an issue.

[@jellyboy1112]

@@punkfingerboards6283 thank y oh for the fast reply! I’m going to buy that drill it today because I don’t like the performance on the 1/8 inch regular bit. It’s too hard to get a perfect countersink. It is easier with this drill bit?

[@punkfingerboards6283]

@@jellyboy1112 It will take a few holes to get it down but it works pretty good. If you don't press hard enough it has a tendency to bounce in the hole, or skip in the hole and leave an edge that looks a little rough. So pressing firmly is the key, but of course then you might go too far, so that's where the practice comes in, it's pretty easy and fast once you get the hang of it.

[@LucasSilva-sc4ro]

Very cool!

[@nickestovar]

Dope video !!

[@Djmat8]

Hello, i have seen that there is 34 and 32mm moulds. Do the measurement correspond to width of the board when finished or its the width of the mould? for 32mm board do i need a 32mm mould or 34? or can i use a 34 mould for both 32 and 34 or the concaves will not be the same? thanks

[@punkfingerboards6283]

Hello. The 32mm and 34mm molds are the same, only difference is the size of the template. The difference in the concave between the 32mm, and 34 is negligible.

[@Djmat8]

@@punkfingerboards6283 If I buy veneer strips of 1.5 inch wide will it be too narrow to be able to make a 32mm board. what dimensions are your veneer rectangles?

[@punkfingerboards6283]

@@Djmat8 1.5 inches is probably too small. The veneer supplied with our kits is 4 1/4" x 1 5/8", or 108mm x 41mm. The wood we use can be purchased here: www.woodcraft.com/products/maple-veneer-12-sq-ft-pack?via=5d112bea776f6f4e030006e2%2C5d112cef776f6f0e94001655%2C5d112fb1776f6f650d000be6

[@lidahernandez1117]

I ordered one and it is the best just a thought Mabel make some other grafics

[@ellttpmrco]

Entering for the skateboard giveaway!

[@mrzerry]

This is awesome 👍

[@Djmat8]

on this video was it a 34 or 32 mm board?

[@punkfingerboards6283]

32mm

[@rangmy6440]

hey man where can i buy this fingeboard veneer? I"ve been looking for ages, i have one of these molds :)

[@punkfingerboards6283]

Hello. The veneer we use for all our mold kits is here: www.woodcraft.com/products/maple-veneer-12-sq-ft-pack?via=5d112bea776f6f4e030006e2%2C5d112cef776f6f0e94001655%2C5d112fb1776f6f650d000be6

[@thecoolbeans8650]

What’s the dimensions for the wood that you cut

[@punkfingerboards6283]

Hello. The veneer is roughly 1 5/8" x 4 1/4" (108mm x 41mm).

[@thecoolbeans8650]

Punk Fingerboards thanks

[@dopey9693]

I put on my clear coat and all of that and I set up my board and it doesn’t want to board slide on a rail

[@punkfingerboards6283]

The clear coat is preventing you from doing a board slide? Did you let it dry? Clear coat should help a board slide, not hinder it. Are you using Deft lacquer?

[@joffremacedo10]

What kind of wood? Please

[@punkfingerboards6283]

Hard maple in the .5mm range.

[@punkfingerboards6283]

www.woodcraft.com/products/maple-veneer-12-sq-ft-pack?via=5d112bea776f6f4e030006e2%2C5d112cef776f6f0e94001655%2C5d112fb1776f6f650d000be6

[@joffremacedo10]

@@punkfingerboards6283 Thanks a loooot! :D

[@flutje5961]

looking for someone to sponsor me rn

[@patrickklineberg4875]

My fingers wanna skate

[@niko5782]

I don’t have cash for punk fingerboards and the shipping is like 20-50 dollars

[@punkfingerboards6283]

Domestic shipping is free, and international should be about $15-$25 bucks, if your shipping total showing over that, just shoot us an email.

[@charcoal-d4y]

I hope I win the givaway

[@r3nstur]

Sup 🥵😊

[@KatnisTWB]

gru is bald 😳

[@angelamartorano903]

Entering in the giveaway! Insta is luca_martorano looks awesome and congrats on 1000!!

[@michaeldantemachado]

Can you sponsor me