All New UNI-T UT61E+ Multimeter Review & Teardown!

[@danuber558]

Darren is like a kid with a new toy. Hope it lasts... the joy

[@rinqucosta2422]

Beautiful design and good build quality ... It has beep in diode range with green indicator, fast active continuity response and high resolution ... It is so far the best one of UNI-T multimeters.. I was searching for a multimeter that can measure 50 MHz and up for motherboard repairing but UT61E+ has the ability to measure 220 MHz frequency...OMG!!! It kills all...

[@KeepOnTesting]

Really amazing multimeter in terms of specifications..definitely in the big league! 😀👍

[@rooteroman]

How is possible this meter has capable to measure 20A current and is protected with 10A fuse? what's the part I not understood? I enjoy much viewing all your reviews.

[@KeepOnTesting]

Yes, definitely needs time be addressed!

[@Ivan4es1]

15:00 That is "superfast", but he is continue beeping after disconnect probes - that's a Problem.

[@guateque1718]

Perfect to venture into the electronic side of things as opposed to just electrical. Thanks for the review.

[@englishrupe01]

Wow! Great review, thanks Darren! Love it.....and i have been eyeing it now for nearly a year but can't quite justify buying it since i have maybe a dozen multimeters already....but man, it is so tempting!

[@KeepOnTesting]

Big thx! Yes, it really is a great multimeter, UNI-T definitely did a bang up job on the UT61E+...If I was going to buy only 1 new multimeter for 2021, this would be it!

[@unclejohn5012]

​@@KeepOnTestingHey mate, I know this review is a few years old. But would you still go for this in 2024 as a all round hobbiest/ electronics multimeter? Chasing good accuracy and in similar price range or less. Thankyou :)

[@pablo241234]

I love watching your reviews! Really useful and informative

[@Igor_user]

In the sound continuity mode (diode test), if you close the probes and hold and then open, the multimeter will still beep. And you admire.

[@Rudro2024]

Is it the upgrade of UT61E?? By the way it is a cool multimeter, very well finishing. But NFC is very poor & there should be temperature range instead hFE

[@KeepOnTesting]

Yes , its the upgraded version of the UT61E. All in all a spectacular multimeter with sone shortcomings but nonetheless a worthy update! 😀

[@atexnik]

Agree. hFE is very archaic (especially when there are transistors meters for few bucks), instead there should have been a temperature measurement function.

[@housinit]

Can't get enough multimeter reviews! Thanks Darren!

[@KeepOnTesting]

Thx Luis ! I 👍 i agree ..

[@GameProgrammer79]

great review ... i always wanted a great multimeter years back and uni-t ut61e 22k multimeter with a bar graph was the best for the money. That was the dream then but when I actually bought one it was a different time.. I could afford a better one. After watching your review, refreshed old memories.. may be just for the nostalgia I will buy one!

[@KeepOnTesting]

Its a fantastic dmm. I'm really impressed with the quality and performance UNI-T have achieved. Definitely 👍 a trooper in the multimeter arena!

[@ve2jgs]

With so many meters in your collection, even choosing which one to use could be a complex process!

[@KeepOnTesting]

Oh my, that's totally true..!. last count I'm @300 multimeters about 50 of which are vintage...too many options ! 😄👍

[@JohnUsp]

The Reality is that just Fluke, Keysight, Brymen are the good ones, ALL the Chinese (even UNI-T) are not so good.

[@dark_xdark132]

@@JohnUsp Fluke made in china

[@JohnUsp]

@@dark_xdark132 model "C", all other models are Made in USA

[@dark_xdark132]

@@JohnUsp so what,made in usa is not as good as made in Germany， and there are not many things made in usa in fact

[@BrianBloom]

Just found your videos - perfect for me as I am trying to make sense of the various cheapo meters that are out there now... Thanks!

[@KeepOnTesting]

Great to hear Brian! Welcome aboard 😀 There's a CHEAP-O TOP TEN list, under the description.

[@atexnik]

I just got my 61e+, too. I noticed the casing has a little bit of play near the gap on the right side, when squeezed. Is it same on yours? On 3:11 it seems yours also has that bigger gap on right side.

[@KeepOnTesting]

Great stuff! I have zero play on my unit. The casing is even and square all around the perimeter. During the review its possible my unit was not fully secured after doing a Pre- Teardown. Any one else have a similar issue on their new UT61E+ ?

[@atexnik]

@@KeepOnTesting this is how it looks on my device: kzbin.info/www/bejne/q5CVmHmpf5Wpqq8

[@KeepOnTesting]

@@atexnik ahhh...thx for the video. Unfortunately I don't have that space on mine.. let's hope its not typical. Will you keep or return the multimeter?

[@atexnik]

@@KeepOnTesting since this is a minor issue, and considering the fact, that I've obtained it via a dropshipping company from China (hence, there's no way to return it), I'll keep it.

[@KeepOnTesting]

@@atexnik Good call!

[@Elektrik1.5x2]

I watch your video reviews and am your subscriber.As always interesting, informative and a little humorous, I have another like.Thank you for your work, know that you are watched not only in America and Canada, but also far beyond the ocean!

[@KeepOnTesting]

Thank you my friend! It's very nice knowing that I have viewers across the ocean such as yourself. KZbin has made the world a much smaller place and that's a good thing 👌 Keep On Testing! 😃👍

[@erhanzeynel]

Brand new, fresh UT-61e-II on the shelf. Bell clicked and waiting for your review.

[@ejtaningco6354]

Oh yeaaahh Thanks Darren for always keeping us abreast in the Uni T line up. I have bought 2 uni Ts in the past 10 months (UT191T and UT195) because of your comprehensive reviews, I do nothing fancy just Automotive applications and I'm loving it's shock proof body. Thanks again and Cheers ❤️love lots from the Philippines

[@KeepOnTesting]

That's great news EJ! Keep On Testing!

[@nst2142]

backlight stays on, with shielding. definitely you should open the bottle of shampagne.

[@juancarlossandoval5628]

Hi Darren , I had just look into my 61d+ internals and to my disapointment it does not have the shielding, maybe only the 61e+ have it. Also the ptcs,, mine only have 3,, and the high voltage precision resistor network the black retangle precision resistor is not present, solder mask is green.

[@KeepOnTesting]

Thx for the update Juan..wow, that's truly disappointing 😔 I wonder why the shielding was absent on the 61d+? As for the input protection , I suspected it may have been watered down on the other versions..thanks for the confirmation.

[@juancarlossandoval5628]

Hi, just found out today,, the screw hole at the back of the 60+ and 160 dmm is compatible with camera and phone tripods/phone stand, I mounted mine on it.

[@KeepOnTesting]

That's definitely a cool idea..multimeter on a tripod.. could come in very handy !

[@jameswong7327]

The first video on UT61E+. Much improved from UT61E : backlight, auto-off

[@KeepOnTesting]

You got it James..UNI-T hit a homerun with the UT61E+ ! I'm happy to be one of the first to review this great 👍 multimeter!

[@razer192]

I might treat myself in a few months if the price comes down. happy Christmas thanks for all the great reviews 😊

[@KeepOnTesting]

Happy New Year Dave! Its certainly worth the treat..exceptional multimeter!

[@pyromen321]

Holy crap! A backlight that stays on!!!

[@KeepOnTesting]

You Got it! What a pleasant surprise ☺

[@shaileshkumara.m.anandappa7641]

Wow great meter n well built......Nice to see shielding n display backlight......

[@KeepOnTesting]

👍 Agreed, really impressive!

[@atexnik]

Have it on hands now. Not very well build, but okayish, in my mind.

[@KeepOnTesting]

@@atexnik Really? What are you dissatisfied with build wise ?

[@atexnik]

@@KeepOnTesting kzbin.info/www/bejne/q5CVmHmpf5Wpqq8

[@FLRyoutube]

Can you measure resistance with the test socket? In mine, not only the resistance measurement with the socket works

[@KeepOnTesting]

Negative, the components tester does not measure Ω ..(at least not on my unit).

[@FLRyoutube]

@@KeepOnTesting Thanks, in my review the socket work for capacitance, diode, continuity and hfe, but not for resistance. I thought it was strange.

[@chahestan1]

I am agrees with you that, if Uni-T replace the hFE to Temperature measuring input.

[@juancarlossandoval5628]

Its a good point but I think uni t will not do that since they have a model on 60+ series with temperature ang loz function its the 61d+

[@krzysztofg2025]

Merry Christmas from Poland

[@KeepOnTesting]

Merry Xmas!

[@juancarlossandoval5628]

Thanks much this is my most awaited review. I have the 61d+ coming.

[@KeepOnTesting]

Excellent news! Let us know how you like it ! 😃👍

[@juancarlossandoval5628]

@@KeepOnTesting hi, just got the 61d+, i like it very much,, it was able to light up all my test leds,, diode open ckt voltage is 3.2volts. Ncv mode is good its not as weak as shown in your video, maybe I was lucky with this one

[@KeepOnTesting]

@@juancarlossandoval5628 Thats great news Juan !! Glad everything is good..it really is a great looking multimeter ! Keep On Testing !😃👍

[@juancarlossandoval5628]

@@KeepOnTesting indeed a great news,, even the pc link is working, I just got it tested now. Im using windows 10 version 20h2 latest version on a 64bit system ryzen 3 , 16gb ram machine.

[@Jose-Ribeiro]

@@juancarlossandoval5628 try to do a video review for the UT61d+. Does the UT61D+ the real electrician multimeter?

[@yambo59]

Well finally Unit has come through with some big and much anticipated upgrades and features on this completely new edition of the UT61E-! Not only a backlight which the old version did not have but one that stays on at the users command and sporting colorized alert with diode beep, wow. And hiow about that shielding, very nicely fit not just an after thought. Obviously some new software will need to be issued for the data link, but its just a software update away. Even more surprises in the audio and visual alert areas and more. The great thing is UniT appears to have been listening to its customer base and comments and responding in this new revision. Thanks for listening UniT, now just dot the I's and cross the T's to back up the price point and this one should be a winner and welcome major upgrade to its predecessor

[@KeepOnTesting]

Incredible isn't it...I was floored when I realized the backlight was permanent...talk about a great update..! Hopefully the data link will be rectified soon..its a big deal for sone folks. Btw, the design is really growing on me..absolutely looks great on the bench. What do you think about the new look ?

[@byjimeny]

All I can say is that I really enjoy your reviews. Keep up the good work and MC&HNY

[@KeepOnTesting]

Thx so much Jim ! Merry Xmas

[@froilanrivero2826]

Just came across your channel, great review you deserve more subscribers

[@KeepOnTesting]

Thx Froilan! Slowly but surely...😀👍

[@victorarevalo108]

Great video! Glad to have insight on this updated model. Thank you.

[@KeepOnTesting]

Keep On Testing ! 😀👍

[@JeaRmiX]

Hi, I'm looking some extra features on this multi-meter, as an example if you press the hold button and turn it on is it how fast and how much count it will be(previous one, has a less count, but make supper fast measurement ) what about "ripple" AC on DC? why it go on overloading when nothing connect on it? TrueRMS bandwidth? Exclusion function through the range? Because everything that you show in your video we can make by 20$ multi-meter.

[@KeepOnTesting]

AIexey, it's a standard touch hold, no delay ...unextraordinary. I would use the MIN/MAX feature to hold a reading as it will freeze the reading indefinitely. Unfortunately this clip was negated in the editing . I'm not sure what "overloading" you are referring to. It stays on dead zero with nothing connected in Voltage mode, there could be sone EMF at play on the leads if near other electrical sources but its usually very good at zeroing. Yes, AC-coupled true rms measurement is desirable when measuring small AC signals in the presence of large DC offsets. However I could not review every feature in detail as I wanted the video under 30 min. Stay tubed, there will be more on this great multimeter in the future.

[@borr33tube]

Thanks for the early review on the new Uni-T 61E+. I was hoping this would be an easy decision to upgrade to from my current 61E. I am always forgetting to turn off the 61E and draining the 9V battery. This new 61E+ meter certainly fixes that issue along with backlighting. I don't need the hFE or the NCV features and echo the wishes for a temperature measurement instead. The price seems a little high to just run out and buy another but hopefully that will come down over time. Maybe they can come out with another upgrade (61E++) that will be more for electronics.

[@KeepOnTesting]

Hi Brian, I echo your sentiments. I don't know why they labeled the UT61E + as an Electricians multimeter ? It has no NCV and no weatherproofing/IP Rating...also no independent UL/Intertek Cert means it might not be sanctioned for professional use in North America. That being said, it's one great 👍 multimeter for the masses and the data logging feature (yes switched USB cables now works) is very fast and stable. Honestly though, if the improvements don't sway you then you're probably better off passing this one by, after all..its still a UT61E+ just leaner and meaner 😃👍

[@jimmiievans9244]

@@KeepOnTesting model ut161 for EU 😂

[@budi0251]

looks like 2 IR diode for USB communication, RX & TX probably like other high end DMM? Those diode beep test is similar to fluke 87V, and I surely appreciate that additional green led indicator, fluke should take a note. Hold button as backlight? I might miss my delay hold on UT61E, at least they should try autohold or similar to fluke's touchhold. Funny though they use those ARM processor and keep at 22000 counts; for the sake of UT61E name series probably? Clamping transistors looks nice and easy to identify (and get replaced with better TVS ). Resistor network similar to UT61E, some people try to replace it with very expensive Caddock but then realize it's 22000 count with 0.01mV resolution, not much of difference. No calibration trimpot? can be a good thing, supposedly more stable than those dreaded multiturn trimpot that keep drifted away, bad thing is you probably can't calibrate it yourself. Things I'd love is 0.001 mV resolution DC (and AC if possible), slightly faster capacitance measurement. They limit their max voltage measurements to 1000V, my mastech MY-64 survived many 1999-ish DCV with no breakdown and still going strong (it was 2000 count limited, hence 1999VDC max.). I use that voltage mostly to test MOVs & TVS.

[@KeepOnTesting]

Correct, the Cyrustek chipset is 32,000 count so its definitely held back from its full potential. UNI-T did alot of things right with this dmm. No calibration trimpot makes sense and should help with stability over the long term. The MY64 series is definitely a work horse!! Great info.. thx for your input 👍

[@carlosgarrido1285]

Excellent video and congratulations on the channel, I just ordered one of these, it looks like a great multimeter for electronics and home electricity, rich in functions and with incredible ranges. I hope NCV performs better on mine but it is not a feature that I will use very often anyway. Greetings from Uruguay

[@KeepOnTesting]

Thanks so much! I think you'll be very happy with the multimeter ...it's a fantastic instrument! Let us know how you like it 😊

[@creativ01]

Nice review. Which one should i choose, this or UT191T? :)

[@KeepOnTesting]

Indoor, for the Electronics bench or workshop..UT61E+, If I was an Electrician or tradesman using this daily, outside then the UT191T...Hope that helps! Both are great multimeters 😃👍

[@creativ01]

@@KeepOnTesting Thank you!

[@bhushan9066]

It transmits data through those LEDs so they must be Infrared. But how that IR signal gets converted into electrical signals for passing on to USB port? 🤔 ..... You should have tested and showed us the Hfe mode in video. What logic UNI-T had thought in that fuses in there?

[@KeepOnTesting]

Agreed, 😞 in retrospect I should have tested a transistor, would you consider the Hfe worthy of its own range on the selector?

[@bhushan9066]

@@KeepOnTesting I dream of it to be worth it on the selector as important as the temperature 🌡️. Don't be sad, cheer up and keep on testing!

[@eloymesiasguerrerosolorzan1194]

Gracias por la riwiu que valor tiene en dolares.

[@juancarlossandoval5628]

Good day Darren,, question. Have you observe this on your unity legion? There is an issue in low ohm measurement. In shorted test leads meter shows 1 ohm.The user manual stated if meter have higher that .5 ohm in shorted test leads is not normal. The meters are just appox 1 month from purchase date. Test leads are good. Tested it ony my 87v and sanwa cd771. This issue occurs on my 139c and 61d+ . 87v shos .3 ohms, sanwa shows 000. Unity both shows 1.1 ohms

[@KeepOnTesting]

Hello my friend..I will verify when I get a chance...thx for the update!

[@PowerElectronicRepair]

I like the curves shape on select and hold buttons, Uni-t knows how to make beautiful multimeters. Great review 👍

[@KeepOnTesting]

Yes ! Astheticaly they really do design some of the best looking multimeters on the market 😀

[@jagodishpanday2592]

Another gorgeous multimeter from UNI-T

[@KeepOnTesting]

Yes, It's a beauty 😍

[@just_arandom_guy8209]

This one looks great for a Uni-T DMM, in this price range is unbeatable! I love competition!

[@KeepOnTesting]

Agreed! Competition sure seems to be good for the multimeter biz.. 😀👍

[@engr.salaheldin]

Thanks for review What is the best for LEDs test light ALL LEDs and show voltage drop 61E+ Or 61D+

[@KeepOnTesting]

61E+ 👍

[@emfloyd473]

Thanks for the review. Would be great to receive as a Christmas gift.

[@KeepOnTesting]

Fingers 🤞

[@theodordoerksen8048]

Wow looks like a nice Multimeter.I love the teardown video’s.

[@KeepOnTesting]

Its a beauty..Absolutely love doing the teardowns..!

[@juancarlossandoval5628]

Love that they use bigger movs and ptcs,,, downside is the diode test, my 139c was able to display forward voltage drop and lit all my test leds, this one seems not so as your test shows.

[@dreamaster3027]

Great review! Thanks. Greetings from Uzbekistan ✌️

[@KeepOnTesting]

Hello my friend! Glad to have you on board! Greetings to all our Uzbek viewers...😁👍

[@luizatecnica1491]

Friend, help me with any questions please 1 - Do you think I can use the UT61E + for bench use for external use without any problem? I am a T.I technician and I use it for repairs to motherboards, fountains, desktop etc, and sporadically home electronics, 2 - do you think I made a good choice to sell my fluke 28 II EX to keep my money in my pocket and buy this Unit? 3 - Can I exchange the 10A fuse that comes with it for a 20A fuse? If yes, how many V would be fuse? I thank you for your help now and success in your videos congratulations for the content!

[@KeepOnTesting]

Most definitely the UT61E+ is a great bench meter! High resolution and logging capabilities its hard to beat! As for selling the Fluke 28 II ex, it's a classic 👌and well built. Honestly though, it's apples and oranges, two very different multimeters but fear not, the 61E+ should serve you well! You could replace with a 20A fuse but keep the 250V rating as that is the spec. 😉👍

[@luizatecnica1491]

@@KeepOnTesting Thanks for the quick answer, do I also need to change the 1A fuse?

[@KeepOnTesting]

@@luizatecnica1491 Negative...leave the 1A fuse as is. 👍

[@luizatecnica1491]

@@KeepOnTesting TKS

[@abaoaikiml.3436]

Wow that shielding and input protection.

[@KeepOnTesting]

Truly awesome! They definitely took it up a notch!

[@abaoaikiml.3436]

Yeah, plus that good-looking design and gold tip probes... UNI-T is definitely stepping up. Last month I purchased a UT89XD (my first multimeter) for PHP1,000 (about 21 USD) only, here in the Philippines, thanks to your review. Hope I can get selected in the draw. A second multimeter would be great. Thanks Darren!

[@KeepOnTesting]

@@abaoaikiml.3436 Glad the review helped Aikim, good luck in the Xmas draw! 😃👍

[@radius.indrawan]

@Darren Walker does this Uni-T UT61E+ gives a continuous beep in diode mode when the leads are shorted?

[@KeepOnTesting]

Negative..no continuous beep.

[@radius.indrawan]

@@KeepOnTesting i see.. thank you for verifying it, Darren. 😃

[@djs5089]

uhm why does this 20A meter have a 10A fuse tho?

[@KeepOnTesting]

We see this often..unfortunately. No excuses though, fuse should match it's rating.

[@KeepOnTesting]

@Schwalbe262 It shouldn't..as it's rated for 20A ...of course 20A fuses are expensive hence the cost savings (not good) measure by UNI-T 🙄

[@capitanbombacha]

I have the old one, still loving it!

[@KeepOnTesting]

Nothing wrong with the original Santiago.. its a great 👍 multimeter!

[@juanete69]

Hello. What's the difference between the 191 and the 61? Which one do you suggest?

[@KeepOnTesting]

191 is geared towards offsite, outside electrical work..It has great weatherproofing and a solid build. 61 is better suited to bench electronics. Both are stellar multimeters in their own right.

[@mreb7724]

I have a uni-t tweezer that has a dedicated zener diode mode that can light up smd led on led bulbs. Is there any multimeter that can do that?

[@KeepOnTesting]

UNI-T UT89XD, it also has a dedicated diode mode that's really powerful...one of the best for LED testing kzbin.info/www/bejne/pnLSp5ZrnZZlsMk

[@nortonis3565]

Hello, what a great test. Is the D+ more for the average hobby electrician ? I am having hard time choosing, not sure if i need the extra features on the E+

[@KeepOnTesting]

I would go with the E+ ...no regrets and you'll have one amazing multimeter! 👍

[@Einsteinro2000]

It has a 20A rating but only a 10A fuse inside? How is it possible?

[@KeepOnTesting]

Agreed, ratings should reflect the protection.

[@hamzamalik221]

Cannot Wait TO Buy it

[@stovepipe9er]

The ut61e didn’t crack the top 10 list?

[@KeepOnTesting]

That's because it's not a CHEAP-O Multimeter. Top Ten is under 50$ 👍

[@km.productions]

Great review my friend. I'm confused, which one i should buy in your opinion: UT61E+ , UT191T, UT195E ???? I don't want it for heavy use, i'm not an electrician.

[@KeepOnTesting]

If you're not going to take it outdoors I'd opt for the UNI-T UT61E+..you get alot of multimeter in an extremely well made package! Second place goes to the UT191T which is a favorite of mine.. it doesn't have the resolution of the 61E+ but it's a superbly built multimeter with IP65 weatherproofing!👍 Both are great choices..

[@km.productions]

@@KeepOnTesting Thanks alot my friend for your answer!!! I 'll buy propably the UNI-T UT61E+. You worth at least a Sub!! 😉👍

[@KeepOnTesting]

@@km.productionsAwesome..! 😃👍 Great choice!

[@razer192]

Another meter with Bluetooth maybe to review is BTMETER 90EPD

[@KeepOnTesting]

Thx David...that will be reviewed early in the New Year !

[@soundengineer6332]

Dioda mode out dc voltage ????

[@KeepOnTesting]

2.93V

[@luizatecnica1491]

It's a shame not having temperature medication, but it doesn't really matter either!

[@alimoradi2323]

Why they are always lack of something?

[@numerical_error]

Well, it's definitely an improvement for the UT61E. The screen is large and sharp. The indefinite backlight alone deserves a star. The color coded input.. Nice AAA batteries.. Audible diode testing.. I like it. It's a shame that they rushed the release, though. UNI-T had had to work hard to get a reputation of a reliable manufacturer. I'm not sure it was a wise move to make the consumers wait for them to sort all the software problems. I see it got a place in the top ten cheapos. I wouldn't call an $80+ multimeter a cheapo, but it's a good multimeter nonetheless. And I would have to agree with Marcos Cano. The visual effects can make videos look more flashy. But at 18:32 they are too distracting. As for the Christmas draw, I already got a multimeter from Santa. No other presents needed. Still hope to catch the Christmas livestream this year.

[@KeepOnTesting]

Well said ! Appreciate the feedback as always..I'll definitely take your suggestions to heart. Yes..the TOP-TEN CHEAP-O Multimeter list will be adjusted accordingly...its definitely not a CHEAP-O. Keep on Testing!

[@TheRadiogeek]

Looks like some much needed improvements have been made over the previous one. I hope the QC is good from unit to unit. Nice job on the review! 👏🏻👍

[@KeepOnTesting]

Sweet definitely sums up this update. I think my USB Cable is defective hopefully a new one will fix the data link issue. Definitely pleasant on the eyes..akin to that red Vondior Weather radio you reviewed not long ago on your channel..😃👍

[@TheRadiogeek]

@@KeepOnTesting I’m beginning to think your favorite color is red. Thanks for watching. 👍

[@pyromen321]

Great review! I saw this meter on ali express about a month ago and was waiting for someone to make a video! I’m wondering if they used a 1A fuse to reduce the burden voltage on the meter. I’m curious what the voltage drop across the meter is at 200mA and whether or not the handful of ohms from a 220mA fuse would be significant. It seems like it’s an upgrade from a 61E, especially as far as input protection goes.

[@tefatronix]

Doesn't look bad at all... The speed of autoranging is good. I have several multimeters based on DTM0660 or some similar chip (UT139C, AN8008...) and while generally working fine, they are super slow in this aspect. But it costs considerably more than the classic 61E. Maybe at that price or slightly more, there is some Brymen meter with similar specifications...

[@KeepOnTesting]

Since it's brand new I imagine the price will come down eventually.

[@waleedattia7014]

Thank you for this great review. Can it the frequency of the square wave be measured by this device?

[@KeepOnTesting]

Great question...I will verify and report back.

[@EVO_SE]

Would be nice addition to my automotive tool collection. great review!

[@ericchang7706]

Ouch. USB logging is what makes this DMM unique. I'd be livid if I bought it for that feature and couldn't get it to work. Other points: 250mA is too low on the low current side. Are those 4 AAA 4s or 2s2p? If 2s2p, they should have used 2 AA. Lastly, I think I missed the diode testing. Overall for $100, I'd expect UL listing, 600mA low current, and working USB.

[@KeepOnTesting]

The USB data logging was a real pain. Definitely should be working without all the hassle. I'll keep you posted. Btw, it's running on 4 AAA batteries. Standard diode testing was nicely implemented with an audible beep and visual indicator. Definitely missed the UL listing and agreed, that mA range is too low for a multimeter in this price range.

[@mevlutatesoglu7239]

Hello. Can you examine Borbede multimeter?

[@KeepOnTesting]

Which model 🤔

[@AD-wd7ff]

Hello. I bought this multimeter a couple of days ago. A very good model for your money. The software works fine in Windows 10, but to download it, you need to solve a puzzle: there is one extra dash in the link to the program,before ._exe, delete it, and everything will load. What disappointed: weak NCV (not really needed) and there is no indication when the LEDs will ring ....

[@timothysorkar9852]

Superb multimeter 👍

[@Rudro2024]

Yes you are right

[@TechnoWit3D]

Compared to 89xd, which one is better?

[@KeepOnTesting]

Oh my, this is in a different class..UT61E+ is definitely a step up, more capable multimeter!

[@TechnoWit3D]

@@KeepOnTesting ok thx Darren. So the habotest ht118a is still the best for budget multimeter?

[@superpooper_2030]

I didn’t see UT61E+ has LovZ feature unlike the UT191T which has

[@irwanhariyanto7584]

hello sir can you help me, which one is the best UT 39C+ or UT890D+ for automotive

[@KeepOnTesting]

With regards to automotive use, the UNI-T UT107 which has Dwell, RPM and a 12V Battery test... is a great choice from UNI-T. You can find it here: ebay.us/gL4QaV

[@derektodd4126]

Just love the new styling of UNI-T, wonder if there are plans for a new 181A? I have the original of this meter and has served very well. Best wishes from Northern Ireland.

[@KeepOnTesting]

Its really aesthetically pleasing isn't it ? UNI-T definitely knows how to design a multimeter! Cheers Derek.

[@kaputenkyun1044]

Software works like a charm on windows 10 and 11, i can confirm. Question, how can we calibrate this bad boy?!?

[@electronone5219]

As I recall, you were going to breakout the bubbly with a cheao meter, but you could do it anyway and buy more for later. That meter has some pro ranges and good input protection; however, the higher cost and lack of UL, CE, SA, ETL or etc puts it in questionable position. I wonder about the data link. Good review--count me in the draw.

[@KeepOnTesting]

Cheers my friend!! I was at a crossroads.. its not a CHEAP-O but its definitely shielded...stay tubed for that bubbly.. 😳👍 I was miffed about the data link..absolutely a nogo...but I'm sure I can get it going..it just shouldn't be such a chore to setup.

[@KeepOnTesting]

Spot on EO, its chilling.. and will be un corked as promised...stay tubed!

[@juancarlossandoval5628]

The 160 series are CE rated, as per uni T website

[@bhushan9066]

@@KeepOnTesting I want to give you a smack for that 😏.....😂😂😂

[@KeepOnTesting]

@@juancarlossandoval5628 Yes that's correct. However, Conformité Européenneor or products that have received the CE Mark are not automatically considered to be UL Listed. This is, in part, because some product types with the CE Mark do not have to be third-party certified and are not necessarily compliant with North American standards.

[@vladsoare8577]

Something doesn't look right. Why does it use a 10A fuse, when it's supposed to be able to read up to 20A?

[@graememorris7820]

Why was my comment deleted ? I just mentioned that I owned two UNI T multimeters in close succession , and they both broke down , thereby presenting the question of reliability. It would be nice to hear from others with experience of the brand regarding both reliability and unreliability, so that potential purchasers can make a slightly more educated guess before buying. Why the censorship?

[@KeepOnTesting]

Hmm..nothing was deleted. I love the feedback. Good or bad its all relevant ! Reliability is important and so is price, build quality, performance, features and input protection. I think UNI-T has a real winner with the UT61E+

[@graememorris7820]

@@KeepOnTesting Thanks for the appreciation of my feedback. My Meters were both 61A’s . Maybe input protection has been enhanced on the 61E.model. I agree with you that as far as performance and capabilities go,, Uni T give incredible value for money. As far as reliability and durability go, I’m not sure . I may just have been unlucky with my two- it would be good to get some feedback from other owners. My personal experience with UNI T has just caused me to fork out on a Fluke.

[@mihailkrasavin1]

Добрый день, подскажите пожалуйста, какая максимальная частота записи показаний в память прибора?

[@DanijelTama]

Great review, as always! I wonder what multimeter would you choose: UT61E+ for 76EUR, UT17B PRO for 59EUR, or UT191T PRO for 63EUR? Or some other DMM, even better, in the same ballpark? I need it for occasional household/automotive/bench work

[@KeepOnTesting]

WOW..no pressue eh 😄 If I had to choose just one and I didn't need to use it outside just strictly on the bench I would opt for the UT61E+, it just impresses me more everyday. For outdoor/electrician use I would choose the UT191T as I love the smaller form factor, IP Weather proofing and independent UL/Intertek certification.👍

[@DanijelTama]

​@@KeepOnTesting Thank you VERY much! UT61E+ it is, just needed a confirmation ;)

[@KeepOnTesting]

@@DanijelTama Great choice! Let us know how you like it.

[@DanijelTama]

@@KeepOnTesting Will do, as soon as it arrives!

[@DanijelTama]

@@KeepOnTesting Got my UT61E+ (+UNI-T MM bag +crocs) for 69EUR shipped :D

[@juancarlossandoval5628]

Hi Darren, I would like to request if you can verify this, " there is no manual ranging in capacitance mode on 60+ series? I was testing the capabilities of my 61d+ there is no way I can manual range in capacitance test.

[@KeepOnTesting]

Hi Juan, confirmed, No manual ranging in Capacitance mode..!

[@juancarlossandoval5628]

@@KeepOnTesting kinda sad,, I had found another shortcoming in capacitance test, it cannot detect short.. so when a cap is shorted it would just show OL not beep,, buzzer should sound like a buzzer sound in continuity mode once a short is present even in capacitance mode.

[@kangtukang4948]

great review Mr. darent. oh y if diode mode, short probe long beep or no?

[@watchmakerful]

What ADC does it use? The built-in one in that microcontroller?

[@KeepOnTesting]

Yes ADC is built into the IC HC32L130 32Bit/48MHZ Cortex CPU

[@rcfly63]

Has anyone gotten the USB cable (D-09) working on Window 10

[@blueandbanana]

Can it measure low capacitors in picos accurately?

[@KeepOnTesting]

Yes indeed , no problem accurately measuring low capacitance values.

[@marekwalczak2733]

doeas anybody know how to use data logging for this DMM on mac? Something that works, I have no luck tryin running oroginal software with wine. Is there some other software for DMMs for mac? Thanks!

[@thepiecesfit5049]

Can the REL be stored so that it doesnt reset after powering the meter off?

[@KeepOnTesting]

Negative.

[@juanpablomaciascedeno2556]

Hola compadre me podrías decir si con este multimetro se detectaria fuga de diodos..

[@marvinthamer3342]

What do you do with a meter when your done filming

[@KeepOnTesting]

Good question ...Every year I give away around 50 multimeters. Either as channel prizes, to friends..donate them to charity or add them to my collection if I'm really enamored with the multimeter! I currently have around 70 Vintage multimeters that are all new/unused that I really am crazy about! In total there's just over 300 multimeters currently in my collection 🙃 🙂

[@3rdpig]

I suppose if I didn't already have 8 or 10 meters it might be a decent purchase. But they shouldn't call it "Electrician" with no UL listing, crappy NCV and the other drawbacks. But when has China ever worried about their product claims matching the product?

[@KeepOnTesting]

I really don't know how they turned it into an Electricians multimeter either.. as you mentioned those shortcomings don't add up..Absolutely a great multimeter though..and why not make it 11 😀👍

[@andreib.7495]

in the UT161E version, everything is already fine with the protections! This is the European version, so European certificates CE/RoHS/cETLus

[@Gibley]

it makes sense to change to this one I have ut61e without +?

[@KeepOnTesting]

Great question 🤔 Personally, I would. However, if you're happy with your existing multimeter and the new backlight, added features aren't a deal-breaker then don't. Its definitely an upgrade to the 61e but only you can decide if its worth it. The 61e is still a great multimeter and has stood the test of time.👍

[@titodejesus6238]

I love the way you do your reviews. If you are married or have a partner I bet she is jealous of the enthusiasm you put on this videos. LOL

[@KeepOnTesting]

Thanks so much! My beautiful 😍 Ukrainian wife only gets jealous if I spend all night in the lab! 😉👍

[@frankl1955]

Its interesting but after the UT61C was such a disapointment its hard for me to decide. The UT61C I have reacts like an old RS lab standard that I got in the early 90s and I actually have a $15 meter that reacts faster.

[@KeepOnTesting]

Well Frank...I don't blame you for being cautious.. absolutely worth the money though..UNI-T has a winner on their hands...and if you're not happy..heck..I'll buy it from you 😀👍

[@frankl1955]

@@KeepOnTesting Darren, If I didn’t have to ship it, I would sell it in a second. Mind you I still have a VTVM that I got around 1970 but it just might outperform the UT61C. I am a sucker for a new meter, but what were they thinking selling it with an RS232 PC cable. I’m not saying RS232 isn't used anymore but I've been working on PC’s since 1982 (ZX-81) and I cannot remember the last PC with an RS232.

[@Dr_ritik]

Astroai has a new model out, you should try it.

[@KeepOnTesting]

Yes my friend...I have one enroute for Review ! 👍

[@parlenkow]

One question Darren if you know what model of uni-t have the funtion “auto hold “ maybe with another name

[@KeepOnTesting]

UT70D had the auto hold..I believe the UNI-T UT71 Series also incorporates this. I'm trying to think of another 🤔. Funny how such a useful feature is so hard to find.

[@parlenkow]

@@KeepOnTesting thanks auto hold is a exelent funtion like expensive fluke 87 V have for troubleshooting

[@VolkerKtnbch]

This channel should definitely have more followers. Precise reviews. Good explanations. Did purchase a multimeter right after this channel reviewed it. Subscribed as well

[@KeepOnTesting]

Thanks Volker 😊 Slowly but surely we are increasing our subs. I really appreciate the feedback! Glad we could help you choose your multimeter. 👍 Keep On Testing!

[@VolkerKtnbch]

@@KeepOnTesting Ask Dave from EEVBlog to mention it. This will push it's popularity

[@numerical_error]

@@VolkerKtnbch Dave hates cheap multimeters. He shouldn't find out there's a top ten cheapos on the channel. He'd be livid.

[@VolkerKtnbch]

@@numerical_error lol