Amain Tech Talk: Setting Camber

[@brandonbentley8532]

Highly recommend Lunsford titanium turnbuckles. They come with a beautiful little adjusting tool that makes tuning a pleasure.

[@zee_nyc]

For 1/8 buggy front end… should we be measuring the camber when the toe is zero? (Because most low-medium setups call for positive toe). I’m running a HB with +1° front toe (out).

[@AMain_Hobbies]

No, shouldn't matter. Your rear tires should be toe'd in a degree or two but it shouldn't matter when adjusting camber. Just put your camber gauge perpendicular to the tire, not the chassis, with your gas tank filled 50% for an average driving weight. Lastly, make sure your ride height is set first, then adjust camber. Every time the ride height is adjusted, it changes the camber. Have fun out there; 1/8 racing is awesome! -Brett

[@SPEED-7]

that amain as what is promiss in the future video =)..appreciate it!how about the toe-in and toe-out does it required too?

[@SPEED-7]

Greeting shane! That would be a fantastic and good video for the for the coming vid on toe setup,suitable dif oil :), yes,the droop screw setting would be a good knowledge info, and I would really would like to know the purpose of the droop screw setting,beside it's purpose of lowering the car suspension. Frankly,i been following other rc tech youtube. And there is no vid on this 4type of setting. :). Amain and you are the first.plus amain could list the measurement tool for these setting in the vid link :). I'm running on truggy and buggy 1/8 scale.

[@leigholding1397]

Pillow ball camber changes as you turn.

[@dylanchadderton1]

was this video uploaded again or re shot?

[@dylanchadderton1]

I'll send you a shirt and a ball cap.