Amana Washer Leak Repair: Model LWD70AW

Buy Water Pump: amzn.to/2FI3Oz3
Buy Pully: amzn.to/2EB77c0
Buy Belt: amzn.to/2EBElIf
Amana Washer Leak Repair
Model LWD70AW

[@aliguzel4871]

I am really thankful for this video, I have the same exact problem.. I will try to fix it by my self because I cannot pay for a repairman to come, so thank you again 🙏 ❤️

[@Paisteboy]

I'm glad it helped.

[@jsparti4146]

thank you very much. I looked at few videos before I found yours. yours is the only one that was simple and to the point. oh yeah, and right.

[@Paisteboy]

You're welcome. Glad it helped.

[@stevieb5791]

Paiste boy -- you totally rock! My model was a little different but because of your skilled video and great narrative I was able to fix my washer! Can't believe it's still working after 20 years -- wouldn't hesitate to buy another Amana.Thanks a bunch!

[@Mark-eu4ds]

Stevie B ..... You'll have to buy a Speed Queen. Amana got bought out by Maytag in 2002. Their machines were rebranded Maytags. In 2006, Maytag got bought out by Whirlpool. Now, the Amana machines are rebranded Whirlpools. Amana was owned by Raytheon. Raytheon owned Speedqueen. That's who made the Amana machines.

[@jefflindemann2313]

Nice job.... You are the first one to show it step by step

[@nunyabeeswax186]

Way to go P Man.Another successful venture.Fun to watch you explain it blow by blow.

[@Paisteboy]

Thanks. Much appreciated.

[@stevenromero4871]

thank you, i am grateful for your time and expert advise and video.

[@marcelausategui7006]

I did it according your guidance, but found easier to, first put the belt behind the pulley, RELEASE the tension spring and easily fit the belt on the second wheel.. THANK YOU..!

[@Paisteboy]

Great tip!

[@TheEcorona]

I just got the same washer with same problem man! I love KZbin thanks for the step by step

[@Paisteboy]

+erick corona Glad it helped.

[@refnel]

Ty for the video, i wish i knew how to reinstall the motor, it was easy for you i use a 2x4 to lift it up but one screw does not fit anymore, oh well 3 is not that bad, Ty for the strap info, mine was destroy , i love the way you explain it

[@DanWebster]

Good job Bro. I got one outside I need to replace the belt.

[@eddieg780]

Your machine was manufactured in 1997 according to your serial number. I noticed your tub and transmission are indexing a bit which means it's almost time for new brake pads. I think you were absolutely correct to look at the water pump first for leaking. I have the 2000 model and just recently replaced the seal, bearings and brake pads. These are great machines and we need to keep them running as long as possible then buy a Speed Queen which are almost still identical to our Amanas.

[@Paisteboy]

Thanks for the comment.

[@oppositeworlds1460]

Thank you for your great and very informative video. I have one of these machines and it's still working. I just wanted to see how to open it up.

[@Paisteboy]

+Garaplus It's good to know for the future. Thanks for watching.

[@bpccmath251calculusiihitch4]

Thanks for posting. It helps.

[@Paisteboy]

Glad it helped.

[@IECWorkshops]

Same problem - you saved me alot of time experimenting - thanks

[@Paisteboy]

You're welcome.

[@rileylutz69]

Thanks for the helpful video!

[@Paisteboy]

Glad it was helpful!

[@suzukiman650]

Great job fixing instead of replacing.

[@Paisteboy]

Thanks. Yeah I still believe this machine has some more years of life in it. They don't build them as well these days.

[@miguelsantiago7379]

Thank you for the video very helpful

[@Paisteboy]

You're welcome.

[@JW-rq1ik]

When replacing the drive belt, make sure you measure it and only buy one that matches those measurements. Otherwise, there is a risk you will be returning it. My first new one was 4 inches shorter than the original one, even though it was advertised for my washer model. The original one was 32 1/4 " long, but I could only find new ones that were either 32" or 32.5" long. I went with a 32" one and it works perfectly.

[@Paisteboy]

Thanks for sharing and watching.

[@jongreene4859]

I really liked your video. Tomorrow I am planning to replace the drain pump in my (same model) Amana. It was helpful that helpful that you explain the tools needed as you went along. It would not have attempted the repair were it not for your video.

[@Paisteboy]

I'm glad it helped.

[@jongreene4859]

paisteboy The water pump repair job went well thanks to your video guidance. Thanks again.

[@Paisteboy]

Good to here. Fixing that machine is a good idea since it's built so well.

[@williwonka5106]

Excellent video. I have the same washer and have read that if you remove the two tub stabilizer springs, and tilt the tub forward, the screws for the pump are obtainable. this would enable you to change the pump and or belt without removing the motor. I am going to try it in a few days when my new pump and belt arrive. A word of caution for your viewers, if you run this pump dry, aka run the spin cycle without water (to say..check your new belt...) you will destroy the pump and replacement will be necessary.

[@Paisteboy]

Thanks. Good luck.

[@MykealB]

Thank you so much good heads up ..

[@GabeDalmatian]

Thank You!!!

[@Paisteboy]

You're welcome.

[@blynky06]

Great videos

[@Paisteboy]

+blong yang Thanks.

[@bomberitojuarez7619]

Good job .🔩🔧🔩🔧

[@Paisteboy]

Thank you.

[@TufdogsPlace]

I have a cordless drill with 2 batteries that have both expired. I really dislike that about them. It just doesn't pay to spend big $ on a cordless anything. Another fine how to video, Well done !

[@Paisteboy]

Yeah, I bought my Ryobi cordless drill because my other one was not worth buying new batteries for. I may have to get new batteries though since I have so many power tools that use those 18 volt batteries.

[@suzukiman650]

paisteboy I have a couple of the Ryobi cordless 18V units. Buy the lithium batteries and charger for them. Much better but still not as good as the Milwaukee set I bought a few years back. I never use the Ryobis now.

[@Paisteboy]

Lafond RC The lithium batteries are worth the extra money?

[@suzukiman650]

paisteboy Heck yeah. Lighter and more powerful. Last longer on a charge as well.

[@image1122]

Thanks.

[@Paisteboy]

You're welcome.

[@HeruanEscalona]

Saludos tengo un problema con Amana washer helix slipping , como lo puedo resolver , tiene un ruido como de tiros.Model LWA30AW

[@Paisteboy]

Vea este vídeo en el enlace de más abajo . He modificado la hélice como este. kzbin.info/www/bejne/kIrJqHlvntGJa8U

[@JohnAK72]

Hey that’s a speed queen 👸

[@Paisteboy]

I guess it's the same.

[@jayspencer4346]

Have you seen the new tool available for removing stuck inner tubs on Cabrio, Oasis and Bravos washers???? Part # JTP2014B. It's Awesome!!!

[@MykealB]

Part #JTP2014B ...

[@venisheva5055]

Nice and easy

[@Paisteboy]

Glad to hear.

[@GoldSeals]

Is it possible to remove the pump without taking the motor loose?Can you get small socket drive behind the pump to drop it?

[@Paisteboy]

It's been a number of years since I did this job so I don't remember but if I removed the motor to get to the pump then I believe it is nessasary.

[@MultiBatman45]

this helpd me alot..my belt is worn out but the water pump seems stuck to the motor shaft..how to get it to come loose?

[@EColon15]

Hi Sam Johnson,do you resolve your problem, im having same,if positive,how you do?

[@giotown]

Same problem here. Any resolve guys?

[@landon_7378]

I had same problem. I was able to force it off. Watch out for the pulley, don't want to pry on it...I did and bent it up. My pulley is fused to the shaft so had to carefully bend back to being straight again. There is something different about our motors, I found it hard to put the new pump on as well. Seems to work ok after a little pain. Good luck

[@Tall-Cool-Drink]

lot of work to get the water pump out. The pump on other brands are held by simple clamps. Release couple of clamps, and the pump pops out easily.

[@Paisteboy]

Ok. Good to know. This is the only machine I've ever worked on.

[@coastertalknobszone2102]

Did this resolve the issue completely?

[@Paisteboy]

Coaster Talk No BS Zone Yes. For me it did resolve the issue. It's still working great today.

[@noahmessick8801]

This washer was built by Speed Queen

[@Paisteboy]

👍

[@patou19x]

Where did you order the parts?

[@Paisteboy]

There should be a link in the description for the water pump.

[@michaelsfoster8442]

I have the same issue my washer is leaking same place. So I am thinking same thing water pump

[@Paisteboy]

Sounds reasonable.

[@kellyhipkins5616]

What about the dog feeds

[@Paisteboy]

What are you talking about? Dog feeds?

[@kellyhipkins5616]

Mine leaks too but also stopped agaitating

[@Paisteboy]

Sorry

[@marcelausategui7006]

You need a telescopic magnet to pick up the lost screw..!! 👀

[@Paisteboy]

I have a couple now. I'm not sure if I had one back then.

[@thecitizen61]

You didn't show how the belt was positioned around the pump

[@Paisteboy]

Did you check my other video. I may have shown the belt in that video. This was many years ago so I don't recall what was in the video at the time.

[@RhiDV]

So I have to say. My pump was super stuck... had to take into an appliance place to have them remove it for me. Now running into the problem of getting the dang belt back on the pully 😤🤬😩☹️

[@RhiDV]

Turns out I had a belt that was too small 🤦🏻‍♀️

[@Paisteboy]

Ah. Best of luck with the machine. Thanks for watching.

[@elevatorproductionsbymaxpassa]

The Amana Washing Machines built by Speed Queen are way better than the Amana models built by Whirlpool.

[@Paisteboy]

Maybe so but it lasted me over 22 years.

[@richardminyon3854]

There is no volume

[@Paisteboy]

Something is wrong at your end. This video has been up for almost 10 years with no issues. Check to see if you have the video muted. It's near the play button

[@adamczech1461]

in the other video of this washer you said 1997

[@Paisteboy]

+Adam Czech It was 1997. I said the wrong dates in this video. I bought this washer at my first house that I bought in 1997.

[@adamczech1461]

+paisteboy our apartment has one. the motor burned out yesterday with smoke coming out of the sides.

[@Paisteboy]

That doesn't sound good.

[@adamczech1461]

+paisteboy I typed in the model number and found your video. I watched those top end rebuild on that Mxz. great vids.

[@Paisteboy]

Cool. We ended up doing it twice. The first rebuild was because a mechanic that rebuilt the bottom end didn't use new cir clips on the pistons and one came loose and trashed one side. The second rebuild (in HD video) was because my brother let his sled run out of oil. Thanks for watching.