Amazing Deep Red & Black Metallic Epoxy Floor |Easy Puddle Technique That Anyone Can Do Using Roller

In this video you will see how you can create a one of a kind look using Leggari’s Floor Kits. We use an easy puddle technique to blend the colors together and the result is amazing! This video has commentary from Tim Krumland.
This floor has a deep red base coat and black highlights
Recap of what you’ll find in this video 👇
Applying Base Coat: 0:52
Applying Highlights: 3:30
Blending Together: 4:08
Final Look: 5:25
You can order this floor kit here: leggari.com/product/epoxy-flo...
Or Purchase the items individually here 👇
Primer: leggari.com/product/wb-primer/
Metallic Epoxy: leggari.com/product/metallic-...
Metallics (he used black & deep red for this project): leggari.com/product/metallic-...
Read more info on the products here: 👇
Primer: coatings.leggari.com/view/137...
Epoxy (Clear): coatings.leggari.com/view/952...
Metallics: coatings.leggari.com/view/266...
Leggari Floor Kits were designed to transform your floors into something new and unique by coating your existing concrete, tile, or wood flooring. Floor Kits are fun and easy to install. You can have a designer floor that will last for decades in 2 days with our unique floor kits, custom made to your projects square footage.
If you can paint your flooring then you’re more than qualified to install a Leggari Floor Kit. Our Metallic Epoxy Floor System is leading the decorative resin industry for thickness, durability and scratch resistance with our High Wear Top Coats.
Learn about the floor installation process here:
PREPPING THE SUBSTRATE OR SURFACE
One of the best ways to prep your surface is diamond grinding. You can rent concrete grinders at most rental stores. The next best way is using an etching chemical to etch the surface of the concrete. You can also sand the surface if the before mentioned methods can’t be done. If you can only prep minimally or can’t prep at all we have a Prep Replacement Primer to help achieve a strong bond. We always recommend prepping the concrete surface first.
PRIMING THE SUBSTRATE OR SURFACE
Priming the floor is simple and fast. Mix your pre-measured primer then dip and roll the pigmented primer across the surface until the floor is completely pigmented. Wait 1 hr (or until tacky and not coming off to the touch) and start applying the Base Coat.
METALLIC EPOXY COAT
Applying the Base Coat and Highlights is the funnest part. Mix your pre-measured Base Coat, pour it out across the floor and begin to spread out the epoxy with your rubber squeegee getting it as even as you can. Our Epoxy self-levels so don’t worry about getting it perfectly even. Quickly roll over the surface with your paint roller to help even out the epoxy. Now mix your pre-measured highlight color and apply it to the base color, then blend it to your desired look.
HIGH WEAR TOP COAT
We offer 2 different gloss sheens in our Urethane Top Coat. The Top Coat comes with the option to have a High Gloss or a Matte Finish. It needs to be rolled out super thin and leaves a minor texture which gives it the extra durability. Apply it within 24 hrs of installing your floor kit or you will need to sand the surface before applying it.
**APPLICATION DETAILS ARE ADDRESSED IN OUR TUTORIAL VIDEOS
About Us:
Leggari is a coating based channel (metallic epoxy & concrete overlay) that will show you how you can use our products as amazing DIY projects to transform your existing surfaces! You can renovate things like kitchens, bathrooms, basements, patios & more! With Leggari you can renovate in no time, imitating real stone or creating a designer concrete look!
You can watch hundreds of videos that show you the step by step process of resurfacing your existing surfaces!
- Tim Krumland and Tylor Svangren, Leggari Founders
#leggari #epoxyfloor #epoxyflooring
FIND US ON SOCIAL MEDIA

[@aclark-byrd4375]

I think this is my all time favorite project. The red is so vibrant and the black compliments the high gloss so well. Beautiful!!

[@alexiscraftyourlifeaway9587]

LOVE IT😁😁😁 red and black perfect combination

[@Faith-un7ns]

Wow, I love it. It’s gorgeous.

[@kipdrippers]

Love that color combo

[@tellyfanatic]

Stunning combination.

[@benenivel1478]

And this is so nice for the environment!

[@MrCustomConcrete]

Looks AMAZING ‼️

[@ritalowrie1296]

Wow that's awesome 👏 well with these projects you can never paint yourself in a corner 😊

[@kathydeveaux3788]

So beautiful !

[@osamaelhawat2766]

Fabulous color and job.

[@bababooey1266]

Finalllllllllllly black and red!!!!!! Been asking before you even started the business!!!! Now I’ll buy it!!!!

[@ernestsilva3612]

That's impressive. 👍

[@solutionph2590]

I just want to say WOW😍😍

[@LyrixmusiQ]

Gorgeous

[@barbararobbins441]

AWESOME.

[@Islandman4160]

Awesome, just subscribed!!

[@ciaobellamiamore]

Absolutely GORGEOUS 😍

[@LeggariProducts]

Thank you!! 😊

[@tumbaisaiah9374]

So amazing

[@glendawheeler9224]

beautiful

[@janicegreen3836]

Beautiful good job 😁

[@pamelashackelford1765]

Wow very cool keep up good work

[@gettnitdonewithstarr4379]

Yo... u touched my heart with this one... just beautiful

[@BUGATTI009]

Listen man . You guys r the best bro . Good job . Keep up the good work 👏

[@ThaiPham-rq5ko]

Nice combine color: dark red and black

[@ruthdiaz_28]

I want see a combination of white with silver and aqua green one 😁

[@Gr8terIsHe]

WOWWUH!!!😀

[@Jlgarner1971]

I would love to this with maybe some orange, yellow and grey to make a flame look.

[@datrucka1]

Thats so nice.want my flooring in my truck done like this

[@asicomovienes892]

I did subscribe because i love your videos and i love to learn more about it 👍🏻👏

[@mikes.6925]

Hi, all your projects are awesome...! But I would like to know if using it for floors can resist an intensive use, like restaurants ,pubs, shops. Thanks

[@ahnafsuhail4533]

Wow man

[@gk9417]

Wild 👍✌️🇨🇦

[@americanfreedom6417]

Fire

[@beesybee8921]

Nice floor

[@thenotoriousttg_clint]

This floor so beautiful I wouldn’t want to step on it if I was the homeowner.

[@LeggariProducts]

Thanks for watching!

[@kevinmartin9530]

Is there a coating on top of the black and red mixture to give it that shine..... beautiful floor

[@NBC_NCO]

Can you use type of epoxy to cast parts ? For example can this product be poured into a mold to make something as thick as a bread board?

[@thausler]

You guys should build an outdoor patio kitchen/grill station using your epoxy.

[@seemamysore3445]

Niceeeeeee

[@mohamedpapi9918]

Bravissimo

[@codered2141]

Gorgeous and naughty. The depth, shadows, tone, reflective nature, dark, mysterious. This could have been in the movie, "The Devil's Advocate"

[@LeggariProducts]

Thanks for watching!

[@rawdawgg_]

So fn sick 🤘🏻

[@Induced-Chaos]

That black and red look dope!!! I'd love to do this on my garage floor. How does this stuff do with hot tires and a noticeable grade?? Mine gets higher the further back you go.

[@LeggariProducts]

Standard garage grades won’t be a problem, that’s one of the top areas where these kits are installed. You will also have no problem with hot tires and the typical problems that come with the cheap products. Thanks

[@12vLife]

will this work over well compacted soil cement?

[@paulinomartinianofeitozafe5082]

Bacana , demais.

[@tuftuf7257]

Do you guys ship to Belguim? I'm really thinking about getting this exact kit in my garage at home. I believe this is the epoxy floor kit #23, yes?

[@mrs.cashfenty2479]

His technique have beautiful results.

[@cluelessbeekeeping1322]

That looks amazing! How much to do 1,000sqft?

[@rmatt78470]

Can this be done on an outdoor concrete patio that is exposed to all the elements? Will it fade? Will it last?

[@lbrn8198]

After setting the red, did you pour the black and swirl together or there is how many minutes or hours did you pour the black after setting the red?

[@srinivassathi0369]

Which type of shoe to wear for epoxy flooring?

[@carolclubb6184]

What kinda shoes do u wear for floor covering.? And do regular shoes stick and make a mess?

[@GS-st9ns]

I see that optical illusion coming to light. That is gorgeous. It's so woman-friendly I can't wait to get started on mine. What about coats in between do you sand between primer coats? Do you send between the red and the black polka dots? This is clearing up for me so well and I'm dying to do it. I am a subscriber and I'm trying to get everyone I know to subscribe but they're all tired. I saw the countertops in my sister's new house and I said oh hell no, I'm going and stone coat those for her.

[@billyyarborough]

I am wanting to know if you can tell me about how much it would take to do the inside of a 14 foot utility trailer?

[@briantaylor2877]

We’re do you get the epoxy that you use on garage floor

[@danielalaniz2395]

Did two shades of gray to a converted garage with the mica diamond powder (can’t remember exact name) but it’s always amazing to gaze at, the shimmer is to die for

[@jesusknight1]

Just wondering.. what does a person do to make that room interesting as far as painting the walls and ceiling? All white?

[@MegaSilverlover]

I’m looking to have this epoxy kitchen counter top done buy done know where . I’m in Ca . Can u help? Thx

[@martkirs5669]

When do you remove the blue tape and does it not get stuck in the epoxy if you remove it after the epoxy dries? Thanks.

[@brunosoares8469]

Would you like to know the amount of resin that was applied to the floor?

[@randallmarsh446]

I hate to ask a question ,im noob to this .What is this base coat made of? is it paint or metallic .if paint is it opaque or translucent?? Or is it a combination of both ? TY I love this paticular system that is being presented .The colors are just right for a project i want to complete .

[@punkpac2134]

Is this for a concrete pad only? I'd love to do this to the floor of my toyhauler.

[@kevdaceo]

Fo you guys replace baseboards when done? Or is it something the home owner has to do

[@danielasumda375]

Can I use isopropyl alcohol less 90% on my epoxy?

[@tadmasonrycom]

Any top clear coat or it’s ready to go?

[@polymexdf69]

For something like this I think you have to have nice clean Ceiling or it will reflect everything but it’s nice

[@MrHarleyreinke]

I would love this for my garage. How would it hold up to jacks rolling around and cars being stored for a few months?

[@snoops7942]

should be fine as long as youre not dragging sharp edges

[@flgood]

This is like ASMR for my eyeballs.

[@lorettaspaven24]

Loved to see the red and the rust copper instead of red and black

[@fareslafta3980]

Are use dcp material in work .

[@Manup2day]

I subscribed.....why? Because I like your content. From one tradie to another.

[@pedrobustamante9337]

About how expensive is it to do a one car garage floor with two colors? Anyone know?

[@everydaywithaj8028]

Can this be done on a laminate countertop

[@lucasrivera58]

Do you have a website where to buy the product??

[@rainbowwalldesingner9112]

Hi sir very nice your work this material can be purchse in india pls tell me

[@JannTrixxYT.]

I'm thinkin how much that area cost? And the mixture .thanks

[@evavillanueva5485]

I wanna see one with black Brown white and metallic

[@Del_Freitas]

👏🏻👏🏻👏🏻

[@inspirecreateandnevergiveu7683]

I see a bunch of bubbles at the end. Was that the finished floor at the end of the video? What did you do to rid the bubbles?

[@martinneps9387]

How far do you travel I live in Connecticut please comment back thank you very much

[@tanganbunuh2388]

I curious,if finish all that roll,just leave it???it leveling it self??please tell me I'm very curious

[@ramilgaripov5679]

What is the particle size of the pearlescent pigment powder you use for such floors .10-60?

[@LeggariProducts]

The average particle size of our Metallics (which varies from color to color) is 5-25. Thanks

[@dodzk]

Can this use in wood floor or not?

[@kerrymillan3943]

Can we do red, gold and black next?

[@denab72]

I want to see a bronze base with yellow highlights

[@blacktiger1514]

How to come tha glising ,🙄🙄🤔. What you use

[@dfox344]

I'm really interested in your product. I have 2 garages that I want to use your product on. This is a newly built home and the concrete pour less than 3 months ago. Located in Arizona and temperatures currently 110. Will I need to possibly wait longer for slab cure time and, will etching be needed on new construction.... thank you for sharing. Daniel.

[@LeggariProducts]

The concrete cure should be good to go now with those temperatures. Yes, even with new concrete we recommend shot blasting to remove any concrete burs and open up the pores. Thanks

[@dfox344]

@@LeggariProducts great news, thank you. What csp should I try to achieve.

[@JordanKetterer]

Can this be done in counters this looks really good

[@jonathanmartinez9577]

Yes it can but I wouldn’t recommend white their product yellows over time. It did it to me on countless amounts of countertops and they never refunded me for the low quality epoxy they sell

[@debrabinnicker7376]

How does he walk on it as he works with no trax

[@mafritssangadi8940]

👍👍👍

[@Olupitan0124]

I really wanna learn this how to make this ... How can I learn and become a pro please?

[@robertrreagan1179]

How well does it hold up to driving on in a garage floor

[@isailwind3471]

If it's like any of the shop floors i've done it will be good for a couple years but no matter what it will eventually get pulled up by your car tires. Especially in the hot summer and you park your hot tires on it. Then it looks like hell.

[@anthonycaldi7056]

What is the best way to eliminate bubbles? Does the floor get buffed once it is dry?

[@reneed8793]

They have a special blend of epoxy that bubbles come to top and pop on their own....so cool...less work!

[@sbr6128]

What type of shoe

[@melissashelton3090]

What are you using for the black highlights

[@LeggariProducts]

Leggari black metallic pigments, and metallic epoxy!

[@carlosrazalan1973]

How to order this item?

[@kristofcappoen43]

I love this and would love to do this in my garage, but i am scared it will be really slippery.

[@LeggariProducts]

We have a grit additive to add to the topcoat to help with slip resistance!

[@anthonydiamond5906]

How is it that the roller leaves a mark in wet epoxy but guy applying epoxy isn't leaving shoe marks in it? What part about 2+2=5?

[@21shoey21]

Great video guys. Quick question. How long did you wait after you applied your base primer coat? Was it still wet or did you let it completely dry?

[@LeggariProducts]

You wait about 30 min after applying the the primer. You want the primer to be tacky but not wet! Good question!

[@21shoey21]

@@LeggariProducts when you spread the highlights around, do you roll again to make no streak marks? Or just leave it after you roll it different directions

[@radinarishahradinyan9851]

do we wait for the red paint to dry before adding the black paint?

[@LeggariProducts]

You would put down the base coat of black epoxy and then immediately add the red highlights!