Amazing idea and tip in 7 minutes! This metalworking secret will surprise you

I didn't believe it myself! Amazing tip and trick for machining metal on a milling machine! Simple hacks, tricks and tips for all craftsmen !!!
==================================
Friends, my name is Sergey! I am the author of the channel Cool Ideas DIY.
On this channel I present everything I have made with my own hands.
Creative ideas, useful tips, inventions!
✅Enjoy watching! Don't forget to subscribe, like, and turn on the bell🔔
==================================
🔥Homemade
🔥DIY
🔥Creative idea
🔥Make in home
🔥Life hack
🔥Crafts
🔥Inventions and tools
🔥Usefull and Helpful ideas
🔥Tips and tricks
🔥Welding
🔥Turning work on a lathe
🔥Metal workshop ideas
🔥Making tools from metal
🔥Unique tools that you must have
🔥Waste metal craft ideas
==================================
#Cool #Craft #Diy #Homemade #Welding #Amazing #Ideas
💗Thanks for watching, LIKE, Subscribe & Share!

[@CoolIdeasDIY-qv1nz]

Happy New Year, my friends🌲🌲🌲

[@CoolIdeasDIY-qv1nz]

Thank you very much😉

[@Diy_Cnc84]

Simple and beautiful😊

[@nardaoeletronica]

Excellent job

[@MBJeep]

Hello,Fly cutter👌thank you for filming and happy new Year😉

[@justocastaneda3779]

De los muchos videos que he visto, este es uno de los pocos donde el operador utiliza los lentes de seguridad. Felicidades amigo por proteger tus ojos.

[@GaisaSanktejo]

Nice slotting tool/bore cutter (not a fly cutter) You could potentially use the base part for both, by cutting a hole in the base for the HSS tip and with a locking screw mounted on the side, so this little tool could serve multiple purposes, kudos!

[@najroe]

great project, I have a few similar. I have found couple of minor things helpful. making a through hole tapped on back of that with a grubscrew pushing the cutter out makes it easier to adjust (I prefer M3x0.5, one turn=0.5mm deeper cut or 1mm bigger hole). drilling hole ofset so edge of cutter passes center (or closer to anyway) you don't have to grind half the metal off to get cutting geometry right.

[@MadeInMyGarage]

Very good work!

[@masterQ20]

Rating 1.0000 I like it, great. I'm also a locksmith

[@mrohny76]

świetny warsztat 👍👍

[@user-gb2ys4ux1o]

I.LOV.U.GOOD.WERK

[@janbahadar7746]

Very nice

[@patverum9051]

Well done, but hardly a secret, most tool-and die makers would have a few of those in their kit, made as and when required.

[@ypaulbrown]

wonderful, thank you from the USA, PaUL

[@CoolIdeasDIY-qv1nz]

Thank you so much my friend! Welcome!

[@FayzzalMozzad]

6 ​@@CoolIdeasDIY-qv1nz

[@damarcastro768]

Ficou top demais

[@aryareel3760]

Ide yang bagus

[@Omphitbodoh69]

Best worker... and getting better ❤❤❤

[@CoolIdeasDIY-qv1nz]

Thank you very much my friend and welcome to my channel🙏

[@9charoen9]

Thank you for the video and great knowledge.

[@CoolIdeasDIY-qv1nz]

Thank you and welcome

[@fernanfelipejuradoespinosa131]

Saludos cordiales desde Venezuela Edo TÁCHIRA

[@CoolIdeasDIY-qv1nz]

Welcome🙂

[@dennistennyson8856]

You should buy an edge finder

[@ksmechanicalengineering92]

Great❤😊

[@Willheheckaslike]

200 years ago when the lathe was pretty much invented, we called this device a fly cutter. Nothing new here I am afraid.

[@CoolIdeasDIY-qv1nz]

Welcome friend😉

[@robertocentonze9653]

Complimenti per i perfetti video, per la tua abilità e professionalità che hai e per il tuo meraviglioso laboratorio (penso che tutti noi appassionati di meccanica vorremmo avere), è sempre un grande piacere seguire i tuoi lavori (sempre interessanti).😃👍👋 Un saluto da Roma.

[@CoolIdeasDIY-qv1nz]

Grazie amico mio e benvenuto👍🤝🙏

[@marioluna416]

Es poco, teniendo ese equipo. La difícil es hacer el torno desde cero.

[@wolfdiy]

It was an interesting trick, my friend❤

[@CoolIdeasDIY-qv1nz]

Thank you and welcome😉

[@Alejandromundial.]

Feliz año nuevo, buen trabajo 👍🥂

[@CoolIdeasDIY-qv1nz]

Gracias, amigo. ¡Feliz Año Nuevo y bienvenido a mi canal🥂🍾😉

[@johnbarnwell400]

Awesome way to save money on broach ! …. I made a similar tool for my mill to make the nail nick in my pocket knife blades … great job !

[@CoolIdeasDIY-qv1nz]

Thanks, my friend🙂

[@ZenMinus]

Why waste so much time, material and effort, ruin an end mill, to make a tool to cut a slot that the end mill could cut easily and produce a finer finish and a better end to the slot!

[@darthherald2564]

I'm guessing he's doing this because it's cheaper to regrind this tool than to keep buying side cutters.

[@peterrhodes5663]

@@darthherald2564It's a slotting drill and can be resharpened on that same bench grinder, just as easily as a twist drill.

[@DIY-xx1dv]

Merry Christmas🎉🎉🎉

[@CoolIdeasDIY-qv1nz]

Welcome friend and happy new year🙂

[@user-fk8qz9wj4l]

❤❤❤🎉❤❤❤

[@albertoramonacosta1212]

Hermoso trabajo amigo me gusta Arg

[@CoolIdeasDIY-qv1nz]

Welcome, my friend😉

[@douglasfeilen4344]

Try making holder with the tool hole going at an angle. Say about 45deg. you can then machine on the flat. I guess you probably know all this anyway. Happy New year 🎊.

[@CoolIdeasDIY-qv1nz]

Welcome friend and happy new year🙏

[@construcaogaragemrony9053]

Top mano

[@Piet-lw5js]

Nice!! Happy New Year

[@CoolIdeasDIY-qv1nz]

Welcome friend and happy new year!

[@EdJratNight]

Whats with all the pointing? So far, you have used all the wrong tooling in the wrong way. Maybe you need to go to machinist school.

[@jrpo6379]

You can say that again. You can say that again!

[@karenwolfschneider3731]

Du willst da nur etwas Geld machen mit deiner guten maschinellen Einrichtung gell? Die Vorposter haben meiner Ansicht nach recht! Lerne deine Einrichtung besser zu bedienen, die Welt schaut dir auf die Finger - ja so ist es. Nichts für ungut!

[@goldas2]

bez przesadyzmu z tym niesamowitym pomyslem

[@evandrojosenogueiralima740]

Ideia incrível mesmo,nunca ve isso, vc é um gênio, superou tudo .

[@A.N.T-fw1gd]

Muy bien señor me podria decir donde compro ese torno y por cuanto muchas gracias

[@CoolIdeasDIY-qv1nz]

¡Buenas tardes, amigo! ¡Torno METAL MASTER X40100! ¡Feliz Año Nuevo!

[@brianmckenzie1739]

If you put the locking screw(s) into the side of the holder, rather than protruding from the underside, this will give more rigid access for machining items clamped above the vice jaws. Tools can be ground to cut any shape desired.

[@CoolIdeasDIY-qv1nz]

Welcome friend and happy new year😉

[@tandjrogers]

HAPPY 2024!!! I really enjoy your videos mate. You are what we say here in Australia "a very clue-ey bloke" Sergey. Where do you live? You have a very nice workshop, nice machines mate. Please keep up the good work. Your Pug is cool, what's his name? . We have five Anatolian Shepherd Dogs, Bella; Bear; Junior; Odin and Angel. They think they own the house.

[@douglasfeilen4344]

Happy New Year fellow Australian. Let's keep watching the better quality engineering shows.

[@CoolIdeasDIY-qv1nz]

HAPPY 2024! Thank you so much friend for watching my channel. I love dogs very much and especially my dog - his name is Tyson. Tyson likes to be with me in the workshop:) He is my helper😉

[@CoolIdeasDIY-qv1nz]

Happy new year and welcome to my channel friends!@@douglasfeilen4344

[@tandjrogers]

Sergey I forgot to mention that my name is Trevor but my friends call me Trev.

[@tandjrogers]

@@douglasfeilen4344 Backatchya Douglas, I agree as stated. call me Trev.

[@dennistennyson8856]

An nvent windmill would have done a better job of cutting a skyway. Not impressed

[@janvandemaas4148]

Why anticlockwise ,you are asking for trouble !

[@atomscombining9054]

very best!

[@CoolIdeasDIY-qv1nz]

👍👍👍

[@xxx3581]

Geniall 😂😂😂

[@DIAMOVEVO]

❤❤❤

[@stuartmorris3407]

What's the big deal, so you've made a fly cutter !

[@lorenzogaly]

A cosa serve quello che ha fatto? Si è divertito solo a sprecare metallo! Lo metterei al lavoro davvero, in una officina meccanica per trenta anni come ho fatto io!

[@le3045acp]

you can do what you just did with a end mill i dont understand the point but i would like to understand

[@CoolIdeasDIY-qv1nz]

Welcome friend and happy new year!

[@stefanoraffa403]

Poco utile se hai la fresa con le frese che puoi farlo benissimo con quella

[@rolandkulet7302]

slt . c'est si simple de prendre une fraise pour faire une rainure, et vous avez meme pas retrempé votre outil apres l'avoir passé a la meule

[@janioteixeira2069]

Gente este cara tem um torno kkk

[@wanderleyapparecidovieira2282]

This video is suitable to may own an professional equipment , if you have a small bench lathe ,skip it !

[@michaelkuhn5224]

was ist das für eine Fräsmaschine, die Du das hast?

[@michaelkuhn5224]

which machines do you use?

[@flouserve]

🙆Ya se quien eres, tu inventaste el hilo negro.

[@gyrogearloose1345]

Whoa - he made a random groove. So what?

[@CoolIdeasDIY-qv1nz]

The keyway! Welcome!

[@milansikora9270]

Otrasné

[@goldas2]

blad w tytule-ten pomysl(ani sekret) mnie wcale nie zaskoczyl

[@MrSexoda]

Obviously your not a machinist so im not going to berate you for something like this.....good that you are thinking outside the box. Do gotta say that , as a toolmaker, it turns my stomach seeing videos like this....soo many things wrong here....from wasting a lot of time and materials for doing something that could much more easily be done more quickly and accurately , to the damage you are doing to the machine that isnt necessary.

[@karenwolfschneider3731]

Ja, habe schon besseres gesehen auf seinem Channel. Es ist halt schwer wieder mal was Neues zu bringen damit das Geld reinkommt . . . .

[@medvedkasalapii]

🙉🙉🙉

[@westharti8132]

Was soll mich denn daran überraschen?

[@joarezxavier3972]

😂

[@rizkyaisyah1343]

😂😂😂😂😂😂

[@dennistennyson8856]

An endmill, stupid spell check

[@juancatalan763]

Yo pongo una fresa y hago el mismo chavetero, sin tanta paja. Se nota que estás aburrido. Pero esa herramienta puede servir para hacer un hoyo mas grande de lo normal, si es que no tienes la broca o sirve para una perforación con caja

[@celsoramos7345]

Tudo isso pra fazer um simples chato

[@aleksborisenko6458]

crazy house 😅😅😅

[@mikemraz8569]

To keep comment respectful I cannot comment 🫢