Revive A Flooded Super Engine // You Won't Believe What Happens Next !

Revive A Flooded Super Engine // You Won't Believe What Happens Next !
Thanks For Watching, LIKE, Subscribe & Share!
#Restore #Restoration #Restoring

[@madusmaxamus8670]

Seems like torque wrenches are unheard of in that country. Loved the way he was blowing that sand all over including into the open ports of the injector rail. Having worked on engines for over 40 years that place is scary.

[@Kiwi-pp7rg]

Agree, I think FT is the standard number

[@captain757747]

I am sure that Cummings would like this video for training purposes. of how NOT TO REBUILD an engine. No honing the cylinders and checking for taper, regrinding the crank as wear marks are clearly visible , and the state of the art valve grinder , finally torqueing down the head bolts. If you don't have the right equipment and experience to do the job correctly to factory standards then go find a job in a rice paddy. Sure glad this engine is not used of an aircraft.

[@Kiwi-pp7rg]

Excellent!! The tools of choice are an impact, four duga dugas and a quarter turn for correct torque and a FBH. @@captain757747

[@samuelscragg7052]

I like how these people don’t protect their feet. Rubber shoes! Tuque wrenches truly amazing tools. I’m impressed with these people ability to work together to get it done.

[@BRI33NOR]

Errr😮, did it work ?

[@Jubbe1940]

One wire wheel fits all types of cleaning. Also satisfying to see that all the waste water and oil, run off into a ditch.😄

[@panteret]

yep, and we get forced to drive electric?

[@fordnut4914]

Thats your dumb government fault​@panteret

[@serioustrouble63]

and sprayed over the plants...😁

[@GreyRockOne]

Very Impressed! Looks like you would benefit from a big parts washing station, a sand blasting station AND a torque wrench. Love this!

[@danieljackson6427]

And a shop vac

[@chitown38]

I would just love to hear this engine run and find out the longevity. Nothing torqued to specs on video but great job utilizing what is available.

[@glennkramer2922]

What specs?

[@stephencooney9870]

I think the longevity will be very short, if it last 100 hours it will amaze me. Good paint job though.

[@Padanian1]

oil and fuel down a surface river. Well done

[@amazingrestorations1117]

thank you

[@wanglydiaplt]

Interesting way to reseat the valves! Good music too. :-)

[@amazingrestorations1117]

thank you

[@justingray3456]

The true genius of these guys is they know the exact amount of dirt and grit to put in the engine for a perfect rebuild.

[@amazingrestorations1117]

thank you

[@xxch4osxx]

How can you put rod and main bearing caps on and not torque them? Cylinder head bolts also need a specific torque sequence done to keep the head from warping. I'd love to know how long this engine will run after this rebuild.

[@SeattleBoatdog]

Just long enough for him to make it someone else’s nightmare

[@itjustlookslikethis]

Just be glad this guy isn't an aircraft mechanic.

[@frankdodson3534]

Ya I loved the way he used a impact on the rod caps perfect

[@tellyonthewall8751]

2½ split seconds

[@Tuck-Shop]

It will run until it breaks

[@mchurch3905]

Guess the small stream is already so polluted a little more won’t hurt😢.

[@amazingrestorations1117]

That place is the wastewater area, thank you for your interest

[@tellyonthewall8751]

@@amazingrestorations1117 Crap!! Flowing direct into the Mekong and you couldn't care less. Since when does there grow trees and bushes in a waist water pond? And roots from the bushes on the other side ? But lying and deceiving has always been your best side .. Goonie

[@coinstipatedtexan83]

When he's washing the block at around 31:45 or so did anyone notice the runoff pond and the black rinse water flowing into it ?

[@tellyonthewall8751]

pond? that's the creek ending up in the Mekong and in your imported Tiger Scrimps

[@dusterowner9978]

I would the farthest thing from a tree hugger but, that is a little off putting !!

[@tomlord5652]

I would love to know what brand of diesel engine that is. Looks like a very well made engine and these guys really make all of this look easy. Great video guys!

[@amazingrestorations1117]

mitsubishi 8DC thank you

[@johnlewandowski516]

Rolls Royce?

[@Kevjoseful]

I thought it was a Russian engine

[@francoisd6942]

The title says “YOU WONT BELIEVE WHAT HAPPENS” I don’t indeed. I wonder how long this engine will last 😂😂😂😂😂😂😂

[@tellyonthewall8751]

2½ split sec.

[@marekw.9713]

the care for the environment is amazing. Here we learn what the civilization of Asian communities looks like. 🤣🤣🤣

[@dusterowner9978]

Asian's and Pakistan's must have built in torque wrenches in their arms !!! And they all have that special container of solvent that cleans everything !

[@jeffphillips7290]

If this engine runs an hour it’ll be amazing lol

[@deancooper7952]

A great example on how not to dismantle and build an engine , even with limited tools and equipment , mechanical sense and ability are shocking , I predict an early demise for that motor , made me cringe .😟

[@michaellawrence6677]

Love the way they cleaned up the heads.😂 no warping there. You can do it by eye with a hand tool. No more machine shops for me.😂

[@amazingrestorations1117]

thank you

[@lloyddubose4814]

"Sarcasm" from an "expert? Doing it by eye with "hand tools" is completely doable. Nothing new. Obvious remarks from an Internet hero.

[@michaellawrence6677]

@@lloyddubose4814 or someone who owns and uses a micrometer.

[@OldSkoolF]

Loved the drill power valve job... Yikes..

[@richardmiller5238]

Don't believe that all sand was removed. Good job none the less nice try. No torque wrenches were hurt during rebuild. 😅

[@amazingrestorations1117]

thank you

[@timj41]

Torque wrench , what is this torque wrench you speak of ??

[@tellyonthewall8751]

🤣😄🤣😄🤣

[@aktruong6311]

Chi co Bac ky moi lam kieu cowboy nhu vay thoi . I would not even let them touch my lawnmower .

[@hailua4783]

@aktruong6311 > tộc cối là đỉnh cao trí tuệ của loài.....😂😂

[@rdmgwinn]

Looks like they did a very good paint job on the engine.

[@amazingrestorations1117]

thank you

[@restorationsskills4967]

well done lad. thank you for sharing .😘😘

[@amazingrestorations1117]

thank you

[@frankbing1]

I didn’t see a torque wrench but there was a definite click each time he tightened everything.

[@michaelhill2844]

If I don't have a torque wrench I make the click-click sound with my tongue. The bolt hears it and thinks it is torqued properly. Seems to work.

[@nelsontucker4366]

I guess torque specifications are not a requirement with this engine.

[@felipesants8936]

Great job guys. greetings from Brazil

[@amazingrestorations1117]

thank you

[@Barchenhund]

No warranty given or implied. Edit: Cheated; I didn’t see it fire up. That being said, fun to watch.

[@snufflehound]

Cleaning with solvents with bare hands. Yikes!!

[@amazingrestorations1117]

thank you

[@laurencehastings7473]

Torque callibrated biceps and laser tolerence eyeballs. Amazing but if it works it works. At least they reground the valve seats, replaced the cylinder block linings, piston rings ,injectors and a complete set of gaskets.

[@amazingrestorations1117]

thank you

[@amazingrestorations1117]

thank you

[@scottyjones27]

Haters will always be hating on human that gets off his ass and at least put effort into pressing forward

[@laurencehastings7473]

@@scottyjones27I suggest you read my comment properly. If you can't understand that I was expressing my admiration for the work they do, with the tools that they have and under those drastic working conditions then that's your problem. By the way the channel thanked me for the comment.

[@fredpierce9363]

Those V-belts they use for hoisting slings must be power rated. Mighty strong.

[@amazingrestorations1117]

thank you

[@LCMNUNES1962]

EXCELENTE SERVIÇO 👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 🇧🇷

[@amazingrestorations1117]

thank you

[@mrkhokhar4895]

Wonderful excellent job, given a new life to a dead flooded rusted engine superb job 🎉❤

[@amazingrestorations1117]

thank you

[@wacholder5690]

It looks suspiciously after a Mitsubishi Fuso 8DC9 engine. However: there is usually the brand embossed on the rocker covers. That's a tough part of kit. No need for torque wrenches: tighten it as hard as possible with a hand tool will do.

[@amazingrestorations1117]

thank you

[@ralgor100]

🤣🤣🤣

[@rovolet6822]

Good bye having a safe and clean environment oil everywhere!!! What a mess

[@faithhealer3154]

Pigs they are.....

[@user-gm3ir2go8u]

العمل جيد جدا.. لكن توجد عدة ملاحظات اولها عدم استخدام مفتاح العزم لربط البراغي.. وكذلك عدم تجفيف قطع المحرك من مادة البنزين بشكل تام. ايضا عدم وضع الزيت بكميات كافية على قاعدة السبائك الثابتة اثناء تركيب عمود الكرنك.. عدم صنفرة عمود التيمن

[@amazingrestorations1117]

thank you

[@woolyhighlander7280]

That Poor old Forklift hasn't seen grease in a long time !

[@patrickbass3542]

Don'tcha love how they seated the valves, polished the crankshaft bearing journals and honed the cylinders? Really high tech there!!!!! Gotta love the torque wrench on the main bearing cap bolts too.

[@amazingrestorations1117]

thank you

[@starguard4122]

Wonderful video. Would have been great to see it running

[@amazingrestorations1117]

thank you

[@michaellawrence6677]

There’s no way it would work for long. That’s a great representation of the work but in reality it’ll blow up very quickly.

[@itjustlookslikethis]

There's a good reason we never saw it running, it either didn't run or stopped running.

[@robertmason8341]

I get it, work with what you have and make do. Not everyone has the nicest tools and spray wash cabinets, boring bars, and Sunnen hones. But in all the videos I see of these rebuilds in Asian countries and in the Pakistani Truck channel where they rebuilt engines too, it’s never one guy carefully assembling the engine. It’s always like 3 or more people just attacking it and putting it together as fast as possible. You spent the time to wash it all by hand and scrub it super clean, which I must commend you cause it appears like you did a good job. Hopefully you brushed all the oil galleys off camera to clean and clear them out 😉. Why not take a little time and let one man, your best and most knowledgeable man, do the assembly? Mistakes happen when you rush and 3 people can’t always know/remember what the other guy has or hasn’t done! For that matter, just to give a guy some space, heck the one guy was climbing up all under the dudes armpit to put a bolt in, 🤦‍♂️. That’s the one thing I have to have when I’m rebuilding engines, space and nobody yaping around me. I need to concentrate on the task at hand! But for the most part, you guys did a good job. You guys knew how to take it apart and put it back together, so I’m sure you know you should be torquing bolts to spec and doing other things “by the book”, but we also know as mechanics how to just “get it done, and make it run” with whatever we have on hand! 👍🏻

[@99672]

As somebody who used to grind crankshafts, I've seen many simply put back in, that in videos like this really needed to be taken down to the next size down. Many rebuilds look good in these videos, but these engines will fail again soon.

[@amazingrestorations1117]

thank you

[@midgetrace]

I love the valve job and the valve spring compressor.

[@amazingrestorations1117]

thank you

[@mrajinj661]

I guess he's able to tell when they're torque to spec when his shoulder pops. Just like other videos like this , dirt is a lubricant😂

[@williamparry9314]

Got to give those lads 10/10 for effort.

[@amazingrestorations1117]

thank you

[@summersoldier3311]

Nice work on that big engine rebuild!

[@amazingrestorations1117]

thank you

[@jeffcee9457]

I enjoyed thanks for sharing

[@amazingrestorations1117]

thank you

[@davekauffman8727]

Still waiting for what happens next, that engine looks like a torque monster, but it was still being assembled before the video ended. The other engines looked nice too.

[@amazingrestorations1117]

thank you

[@jonathansparks3386]

Pretty ingenious how they used an old exhaust band clamp as a ring compressor when they installed the pistons. A+ for creativity

[@midgetrace]

band clamp t looked like a beer can to me

[@amazingrestorations1117]

thank you

[@kennyrodg]

There's an hour of my life i won't get back....They don't even run it up...Jeez !

[@edwardgerhart3168]

It always amazes me watching these types of video's - dudes rebuilding stuff in the dirt with minimal tools. If the goal was to get the thing running you probably succeeded however I would be curious to know how long this thing ran for before something detonated. BTW not sure what's so "Super" about this engine...

[@amazingrestorations1117]

thank you

[@andreduplessis5729]

This engine would make a boat anchor!

[@amazingrestorations1117]

thank you

[@bradbergman9182]

How many ft/lbs of torque? Just giver the onions!

[@dennisbrantley6925]

Who needs a torque wrench, its tight enough. Lets just wash all this oil and dirt into the ditch over there and no need to set valve clearances either. What was that diesel fuel on the main bearings, no wonder it look a little hard to turn. No need to lube the cam either lets just slide that on in there. We paint it and send it. It will be all right.

[@amazingrestorations1117]

thank you

[@TheKrighter]

Apparently plastic hammers are unheard of in that part of the world, just whacking the piss out of everything with a steel hammer.

[@amazingrestorations1117]

thank you

[@Sgt_Bill_T_Co]

Didn't seem to oil the crank shells before replacing the crank......

[@jeffdymarczyk4413]

Strange water pouring from engine yet doesn’t seem to be in oil pan ????

[@bugsternc]

no torque tightening, new liner and second-hand piston, DIY work that won't last long... make me think not to buy an engine that comes from there 😂😂😂

[@angus-chime-ac3bs]

notice they never heavily oiled up any internals ,some a light oil ,heavy oiled is better for first start up,when we used to strip down diesel motors all parts got a lot of oil during rebuild,we would pour oil over rocker gear before putting covers back on

[@amazingrestorations1117]

I must pour out the grease only when I start the engine to avoid dust when not in use. Thank you for watching my video. Thank you.

[@dirtmagnet9490]

might be a crap rebuild but invest some money in a good painting equip and wow, best rebuilt engine ever!!!

[@amazingrestorations1117]

thank you

[@P-J-W-777]

Absolutely no assembly lube, no proper torque specs. Those main bearings aren’t gonna last very long. That’s not to mention all the other really bad ideas that I noticed.

[@jamesfitzsimmons5218]

Them rods looked awfully sloppy going on the crank.😂

[@nickeystardust]

Nice job but, going through all that effort and not hearing the sweet sound of the first start? OUCH...

[@amazingrestorations1117]

Because we need to find a ship to operate it, sorry

[@nickeystardust]

A ship?? can't you start it on the floor?@@amazingrestorations1117

[@richardbinder3387]

Watched the whole video then didn't even get to see if the engine would run!!!

[@amazingrestorations1117]

thank you

[@stefanlageambecker6077]

Thank god this engine not is mine ! 🙄

[@Sir-Robalon]

what happens next... he painted it green.... nothing spec'd just air gun it on... love the precession honing on cylinders... this engine will leak like a sink strainer within 3 months under load heat and cool... imagine ordering a new crate engine and this is what they would send... LOL...

[@tirbomax]

coming to an amazon sale near you!

[@rossawood5075]

Aaaarggh, the cam lobes are getting a good hammering being literally rammed into the can bearings, did appear to be any decent lube on the lobes either. A good lesson in the art of metal assembly butchery!

[@amazingrestorations1117]

thank you

[@simonleyman9290]

great work guys you should come and work for me in the uk

[@amazingrestorations1117]

thank you

[@amossnowdaharleyman9179]

Engine was sanded up something fierce. Rebuild will last a couple of hundred hours: not 5000 hours.

[@amazingrestorations1117]

thank you

[@chrischallis4240]

I might be wrong but I think we are using a pair of valve rocker lifter rods, fulcrummed to double as a valve spring compressor - Nice..!!

[@amazingrestorations1117]

thank you

[@user-xd6tw4lu7v]

am amazed at how easy these guys make it look to take shit apart , well done

[@amazingrestorations1117]

thank you

[@franciscobenedito3480]

Lindo motor belo trabalho parabéns passeiro gostei

[@58nunzi]

This is not a restoration. This is take it apart, clean it up and put it back together.

[@amazingrestorations1117]

?

[@talegunner4414]

New style torque specification. Turn till the veins pop in your arm then a 1/2 turn more! And then theres how to mill the head deck. Drag it on the metal plate several times. I can't believe it would run for too long

[@amazingrestorations1117]

thank you

[@DeliciousDeBlair]

That cam went back in in terrible shape too!

[@amazingrestorations1117]

Thank you for sharing. Thank you

[@denisiwaszczuk1176]

Well that was a eye opener. Hope its not for Marine use.

[@amazingrestorations1117]

thank you

[@howiej4084]

Looks pretty.

[@amazingrestorations1117]

thank you

[@pauljanssen7594]

Are these are stress to yield bolts torque them to they almost break.😊

[@amazingrestorations1117]

no thank you

[@TishaHayes]

Hmm, I noticed that my tiger prawns that I was preparing had the quaint flavor of old diesel engine lubricants.

[@amazingrestorations1117]

im sorry

[@joeschlotthauer840]

Looks like Vietnam.

[@cmsracing]

No work done to the inside of the injection pump?

[@highdefp-rm7zg]

Oh dear : measurements, tolerances, torques, assembly lube, methodology. All wrong. KZbin is full of material on how to do this properly . In essence they just cleaned and assembled an engine without any attention to the important processes.

[@amazingrestorations1117]

Thank you for sharing. Thank you

[@jonathansparks3386]

You’re forgetting the pink elephant in the room in regards to this engine. This is a third world country you’re dealing with where all safety regulations, tolerances, assembly, lube, and methodology don’t exist. I’m really surprised that you didn’t pick up on this. There’s a lesson to be learned in everything in life. And the lesson here is on how NOT to do an engine rebuild. Follow all local, state, and federal laws in protecting yourself when rebuilding an engine. Also invest in a Chilton’s motor manual for further reference in rebuilding said engine

[@jackspringer9283]

You're confusing rebuild to original mfg specs with this make it run until it doesn't again level of quality, where these guys are at, this is considered a rebuild..if it runs it's successful.!!!

[@highdefp-rm7zg]

@@jackspringer9283 got your point .. but I think I’d prefer the internals of the engine untouched and just have the outside jet washed in that case..

[@highdefp-rm7zg]

@@jonathansparks3386 I didn’t think the work was being conducted in Beverly Hills. Some third world engineering is carried out with great improvisation and creative talent with little first world resources to hand. I’ve seen it in person The irony in this clip is that the very tool used to post the video is the same tool that provides access to the methodology to do a satisfactory job with limited resources . I’m Surprised you didn’t pick up on this . Happy new year to you.

[@Kakuro-hl1kk]

Very good work. But a huge environmental pollution

[@amazingrestorations1117]

thank you

[@davidwright1653]

All workmanship, materials handling and disposal performed in this video are EPA and OSHA approved.....somewhere. 😯😲😳😧

[@herenow2895]

Nothing kept in order. I like the way they compressed the valve springs to drop the collets back in. What is it that happened next, that we were not supposed to believe ? That they painted it green ? or that they ended the video without letting us hear it run ? I recommend watching this on 2x speed. Great job guys. I hope you didnt have any bits left over :)

[@amazingrestorations1117]

thank you

[@SeattleBoatdog]

Ahhh yes … A jungle overhaul …

[@amazingrestorations1117]

thank you

[@Badge1122]

Wanted to see it run.

[@amazingrestorations1117]

After we finish making it, we will export it to work on the ship. I don't promise that there will be a video of it running, but I will try. ​

[@franciscovegamunoz6584]

Da miedo ver esto. Es una descripción gráfica de como tirar el dinero. Vertidos a la naturaleza, holguras en bielas segmentos de varios pistones cruzados nunca vieron una dinamométrica...... Ke locura. Pero eso si quedo bien pintado

[@amazingrestorations1117]

thank you

[@danieljackson6427]

That engine looked fairly new befor it went swimmimg

[@joebaucom4537]

Great And Great THAT YOUR SON IS HELP ING YOU !

[@amazingrestorations1117]

thank you

[@buckybucky8596]

Featuring Armstrong torque wrenches.

[@amazingrestorations1117]

thank you

[@raymondsanderson3768]

Why are the valve covers held with spring loaded bolts?

[@amazingrestorations1117]

It's convenient and very easy to do that

[@jeraldbottcher1588]

Looks like they were lucky in that it was only flooded not hydrolocked. Amazing what they can do without the most modern equipment

[@amazingrestorations1117]

thank you

[@user-wu2ym3no1g]

Glad to see that their containment procedures are being followed so diligently.. ....

[@amazingrestorations1117]

thank you

[@annteve]

A “flooded” engine? That and that much sand in the intake suggests a marine engine that was in sunk boat. After that rebuilt, I’d be pretty concerned about reliability back in a boat.

[@amazingrestorations1117]

thank you

[@douglasdunn7267]

I cant see that motor lasting a long time, no torque wrench, specs so tight on an engine like that. But, heck of a job using what they had, no wrist pins, no new retainers.....fingers crossed. Find out about the first time a load hits it after warmup.....boom?

[@amazingrestorations1117]

thank you

[@jrgenfriborg3508]

The Oil from cleaning- straight down the creek!? How shameful!

[@amazingrestorations1117]

sorry

[@faithhealer3154]

Pigs....two legged ones...

[@sunny71169]

All the bolts were carefully torqued 1/4 turn before breaking, so what's the problem?

[@albertoramirezmota1948]

Y como sabremos si funciona no sino lo vimos encendido

[@amazingrestorations1117]

thank you

[@squidkid2]

We don't need no STINKIN' TORQUE WRENCHES!

[@amazingrestorations1117]

thank you

[@frankarchuleta5427]

Call the EPA !! Check the oil quality in the Mi Congo Delta!!😅😅😅

[@amazingrestorations1117]

thank you

[@stephencooney9870]

This engine will vibrate itself to pieces within hours. Who cares about torque settings when you have a half ton of sand around when building.

[@bill0118]

And hello mobile device balancing: nothing was spotted.

[@genebartle7715]

Torque spec? I spec that's about tight enough.

[@amazingrestorations1117]

thank you

[@georgeham6626]

Of course they are usong the one two or 3 foot of pipe on the socket to set the torque!

[@amazingrestorations1117]

thank you

[@pudjosanjoto5021]

I think you have to chang cylinder liner, piston & its ring for better compression

[@amazingrestorations1117]

thank you

[@dusterowner9978]

What seals that sleeve at the bottom from leaking coolant ? Didn't look that tight of a press fit to me !

[@amazingrestorations1117]

thank you