AMAZON CHEAP BREMBO BRAKE Upgrade!!! 240SX CHEAP Big Brake Swap CTSV 6-Pot Brembo - Ep.9

[@djnekkon]

There is a reason why sport car builders and manufacturers go with a trusted brand for brakes. Nuts

[@traillimooverland7885]

You should clean up that angle grind cut you made on the caliper. You have sharp edges which can lead to cracking and caliper failure.

[@edgargarcia4545]

What brakes are you using for the rear ? 4 pot ?

[@anthonyprestigiacomo4995]

Are the brakes noisy like wilwoods?

[@alvarozamora3493]

Has anyone looked into and seen if these will fit r32 gtr's with the right brakets ive read some stuff but got no real answers.

[@raymundodesouza9222]

What size wheels you putting on

[@boot-strapper]

Lovin it man, you are building this the same way I build my 240

[@RMLEUMAS]

What rear brake set up are you usin? I want to do 4 pot but don’t even know where to start

[@vietd.8653]

Purple for the win!

[@schalachi]

Hi. I have these brake calipers. I want a braket to work with R33 GTST. You can help?

[@elpisadorcaliente4199]

What size of wheels yo used for this set up and what off set

[@antdo]

They recommend 18" or up. And off set I have is +5

[@ethanm220]

Pretty simple nice man

[@boostedonabudget9018]

does the brake pad over hang the rotor

[@Olrolo24]

Hey what's good man.? Do you guys know if the z1 2 piece akebono brembo brake fit for this set up?

[@oa1583]

Would this fit g37s coupe with akebono caliper.. is it swappable??

[@blakemiller9104]

does anyone know if these work with gkech knuckles?

[@1996misike]

what master cylinder do you use?

[@antdo]

A chase bays wilwood kit.

[@1996misike]

@@antdo do you send a link please?

[@elplopplo]

I don't see why you had to shave it down, looks like it cleared everything

[@240Tony]

For the 4 piston brake option, is that a alternative for front brakes or is that for rear brakes!??

[@antdo]

The 4 pot are an alternative option for the front.

[@240Tony]

@@antdo thank you!

[@trungmai1227]

Man, those brakes are massive!

[@hoseacoltes4756]

can u tell me which model rotors and pads work for these calipers ?

[@antdo]

Everything is listed in the description box for both the 4 pot and 6 pot calipers.

[@hoseacoltes4756]

@@antdo i"m trying to source rotors from other companies other than the one you've posted ....i also wanted to do the same for pads seeing that you've only posted 1 kind and no other options

[@maikzaavedra]

fits in a s14?

[@antdo]

Yes. They make a kit for the S14.

[@j.photography9853]

Awesome man

[@SpachsGarage]

Wow I might do this brake upgrade on my drift car, do you recommend these brakes?

[@boostedwolf4134]

This adapter fits on vette z51 brembo brake calipers for 240sx?

[@clos19851]

will the 6 piston fit on a 17in wheel ?

[@antdo]

For the 6 pot it's an 18" min

[@mckenataylor9777]

What’s the smallest wheel you’d say you can run with the 6 piston I’m building a drag car out of my s13 and was curious because I’m about to order my welds

[@antdo]

CTSVBrake swap recommends a min of 18" for the 6 Pot Brembo. 17" for the 4 pot Brembo.

[@luckylabotv3469]

What master are you using? I bought a car with this kid and it has one of those terrible Booster Deletes and trying to figure out the right master size.

[@missestherteen9651]

Is it chase bays? I ask because I am thinking I should use it but have heard about some negative stuff from chase bays but then I hear that even though their other products have problems, the delete kit for the BM is fine..

[@panosman4500]

Nice bro!!

[@Christopher-dv8ms]

Great video. If you are doing this on a 33, the spot that needs trimmed is different

[@zoehaze]

Hellz yeah!!!! Need to do this to my FX45!!!! Sent y'all an email. I'll be wait in

[@phillipdoify]

Keep it up

[@davidjudd1852]

Man, you and purple lol.

[@bobd9911]

lol one word ,, "Socket"

[@keepitthoro6768]

Do these fit 2013 escalade?