21" vs. 30" Push Mowers | Pros & Cons

It's finally here! The video we have been procrastinating to make. I hope you guys enjoy it especially if your thinking of switching to any of the 30" mowers. If we missed something that you think is important, please leave a comment below. Be sure to check out our Toro and Exmark 30" Review videos for more information in them.
Please keep questions in the comments below. Phone calls are for clients and business inquiries only. Thank you!
JPB - Defeat The Night (ft. Ashley Apollodor)

[@jcjc7783]

This is one of the few videos that actually gave useful information, instead of someone just giving us BS facts from the manual. You actually have user facts, and I much appreciate that. Thank you for your time.

[@pauls3423]

I saw the commercial 30" Toro and ExMark in my dealer today. I started drooling and thought I would do some research. In March, 2016 you loved them and Jan, 2017 you sell them. I bought my 21" Honda HRC216HXA in 2009 and it still runs and looks like new 10 years later. Other than normal maintenance oil changes, blade sharpening, filter cleaning, change trans fluid, lube cables, replacing the rear plastic guard/shield, replace spark plug, and monitor idle and max governed rpm settings ... there have been no repairs required. I think you have convinced me to keep my HRC.

[@robbutcher9503]

I live ‘Downunder’ in Sydney Australia. I’ve learnt more from you on your channel than I have from my local Sydney dealers. I’m off now to buy my 30” mower. Thanks.

[@smbmxdirt3427]

You have helped me decided to buy one of each thanks

[@c623925]

The best comparison I really want I decided to keep my 21 Honda and not to buy 30 Toro after watching this video. Thanks a lot

[@mrwho2174]

take2give my toro is good but runs out of power I use everything commercial and I love Honda commercial. Cuts better, is faster, last longer

[@KeepItMowed]

We love our Toro Timemasters even with the few issues we had on the first model we bought. We just bought a new 22" Toro StandandStow unit with a 190cc and it does great. The Timemasters are so much lighter then the heavier commercial units and the Briggs and Stratton's have not been an issue for us. The timemaster makes our jobs go much faster for sure. Jobs that were 30 minutes are now finished in about 15 mins. Crazy. Good video.

[@delewan]

Thanks for this! Now I want the universe to make a 30" Honda. Hahaha!

[@gatorgator7728]

Absolutely

[@peteywheatstraw9846]

I said the same thing

[@peteywheatstraw9846]

Why don't you just get the best 36 inch out. Gravely They listen to what the lawn guys wanted. Hydro Key start Exmark lookalike handles And get this ....a deck lever.( one of the best options on a walkbehind)

[@haydenshores9943]

Scag made a 30

[@ChrisUrsiny]

good video, i love my 2006 honda hrc216 lawn mower, best mower i have ever bought, cuts great (when grass is dry) and engine is powerful and reliable, it sips fuel unlike my gas hog 7hp ohv briggs on my sears crapsman mower that drinks fuel like a fish.

[@twosencefromcleveland6084]

Downhill yard-edge trimming requiring you to pull the mower up eliminates the 30", and even some 21s. I use an old snapper manual push for this. It weighs 80 pounds and the 3.5HP engine returns excellent quality cut. Also, the engine displacement on the 30" timemaster @ 190cc seems small and the commercial versions are even smaller. I'm referring to modern motors with similar technology. There are several 21s with 190cc engines; Husqvarna sells one with a Honda 190 with overhead cam design, Thanks for sharing, keep up the good work.

[@truckco1b]

Great video. You pretty much nailed it. I started with a 21" Toro commercial. I went with a new 30" Exmark. In the beginning it was great. Started saving A LOT of time. But things quickly went south. Since I bought it when they first came out I had a transmission problem. It was fine because it got replaced within 3 days covered under warranty. But with less then 100 hours I have replaced the BBC cable twice and the self propelled cable twice. Both idler pulleys on the deck went out. It bags good. But, if the grass is wet at all you cant get a full bag out. As you can tell I wasn't impressed anymore. I have since sold it and went back to a Toro 21" and honestly i couldn't be happier. It might take me 5 minutes longer but on dry yards. But, I have found the 21" is faster on the wet ones.

[@greginaustinTX]

thanks for this comment. lots to think about. You think it's better to just save money and go with a 32" walk behind instead of a 30 then?

[@timandes4114]

Here is another channel that compared the 21inch mower vs 30 inch exmark. kzbin.info/www/bejne/gZS6YpuJja5rpNk

[@HFConstruction]

I have been looking at the 30" toro but have never been able to bring myself to spend that much money. Great video man!

[@AmbrosLandscapingInc]

+Fall River Lawn Care You can find 30" mowers used for round $1000. We bough all 4 of our 30" anywhere from $1000-$1100

[@wildbill23c]

Don't waste your money on the Honda mowers either, the engines are fine, mowers suck. World's smallest baggers, the blade clutch system is garbage as well. For being sold as a commercial mower Honda sure fell short on the bagger size, and the blade clutch system on the BBS models is horrible, it does nothing but cause the mower to bog down in areas a standard mower would not have a problem with. Honda you just pay for the name brand, the mower is far from worth the selling price. The Exmark is the pro version of the Toro, tons of issues related to those 30" mowers and for the price its not worth it.

[@25-8]

+William Todd (williamtodd) I'm undecided between the 21" exmark with the honda engine and the honda hrc216. My only complaints/worries for the honda is the excess weight, in TX the st. Augustine can rut easy especially since ppl mostly water here in the morning or night and the moisture just doesn't dry fast enough and with my old Toros it still leaves ruts sometimes so I can't imagine the horror if I put a heavy honda? Also I like Hondas are easier to repair, and is $50 cheaper. The exmarks I like because of its wheels adjustments, clutch is easier imo, I like the bagging with no lid and also reinforced edge pads to protect the corners. I don't like how it doesn't have BBC, I'm undecided. Help

[@wildbill23c]

The Prodigal Son Skip the BBC crap, just buy a simple FWD or RWD mower and you'll be fine. There used to be a channel around where he mowed a lot of lawns with a $300 FWD mower...no need to spend a ton of money on them, keep the blade sharp, change the oil and it will last a long time. If you are worried about weight you'll want a regular 21" walk behind anyhow, skip all the nonsense fancy features and name badges. The fancier the machine the heavier they will be typically, the Honda will be pretty dang heavy due to the deck design which from experience plug up way too easily, the blade clutch was terrible it would bog down in grass that wouldn't phase my $150 push mower, had the world's smallest bagger for Honda trying to claim they are "Commercial". I'd just buy a regular FWD or RWD mower depending on the conditions you mow in and forget all the Honda and Exmark hype.

[@Ricardargas-dy9tf]

Mow Better Lawn Service were I'm front the Honda commercials run about $1600. only 5.5hp clutch blade. exmark 21" zone start run $1100 out the door with kawazaki 6.5hp. less moving parts equals more power to your blade for tougher grasses. love the Hondas they run forever but kawazaki just has that extra power

[@jamesl4379]

Last year was my first. I started with a Sears craftsman 190cc and then upgraded to an brand new Exmark 30. I made it through the season without any mechanical issues. My only real complaint is the clumping in thick wet grass. Also the paint on the bottom of the deck is already peeling off. You do a great job giving thorough pros and cons.

[@WJCTechyman]

All I can suggest is since the paint is coming off, use undercoating spray as it's more durable than Toro's painting process. I can still see Toro mowers all over the place where the paint comes off in sheets.

[@unclesnappy6541]

I PURCHASED THE EXMARK MODEL FOR HOMEOWNER USE: I bought the 30" Exmark in the Spring of 2017. It was the most recent updated version of the 30" walk behind. I have Bermuda grass and not a huge yard to mow. I wanted a great cutting mower and one that saved a bit of time compared to a 22" homeowner mower sold everywhere in town. I had a 22" Toro self-pace prior to this purchase. No comparison. This Exmark is the real deal. It cuts beautifully, has a strong Kawasaki engine and those older issues of transmissions and belt stretching haven't been any issues with this newest model. I was cutting my lawn at 3" height last year (2017) and it handled it like nobody's business. The only time I had clippings on the grass is when the bag was filled to the max. Exmark has a better and larger catch bag than previous model years. I will mention that you need to open the belt/pulley door guard occasionally to clean out any clippings that have accumulated inside there. Allowing this to build up in there over time may result in belt or pulley wear faster than normal. Operator type daily/weekly maintenance should be done anyway so don't forget this location. I have started my 2nd season with this yard beast and it's working flawlessly and is making my yard look way better than the neighbors who are using lawn care companies that use Walkers etc to mow their yard with nowhere near the finish results I'm achieving. I cross cut the lawn so it stripes it and they've told the Walker operators to cut their lawns at an angle or cross pattern and still can't compete. I highly recommend this newer version of the Exmark 30" walk behind for your lawn mowing needs. My lawn looks like a green at the golf course and the even cut this mower provides make your lawn so smooth and even like it's a rug and not grass. Proper lawn care aids in the look as well. I hope this helps out

[@mr.vergasachi7370]

What year to get?? Model?

[@TransportSimulatorNationTSN]

I shall keep my Honda. Great video.

[@jordanpayne7249]

Lightweight is good and what did I use it for it’s a lawnmower kzbin.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.

[@sjn456]

Great video. I went with the Honda Commercial push mower. I use if for residential purposes, but on large yard with a lot of trees. It sounds like the reviewer really loves his 30inch mowers though. The main reason I went with the Honda was for the drive shaft based drive. I usually don't bag my grass, but with the roto-stop and the fine cut bagging didn't add too much time.

[@25-8]

hey, I didn't really understand your last few sentences. Does it bag so good that you didn't notice it and didn't mind it at all you mean, since you don't like bagging? Just asking becsude I'd love to see anyone upload any videos of the hrc216hxa bagging and emptying the bag to see how well it does. I mow a lot of mid size properties and only bag my weekly nice lawns and I'm thinking about getting the honda however I'm very afraid of the weight being a little too much and leaving possible ruts. is this an issue for you on your residential properties or can you upload some videos? I'd really appreciate it.

[@WJCTechyman]

+The Prodigal Son I have the predecessors to the Honda HRC2163HXC (American version being the HRC216HXA, same machine, different numbers for some strange reason) One being the HRA214SX Steel Deck, 2 speed transmission and HR214SX, same as the steel deck only with aluminum deck and the speed selector is on the handle as opposed to down by the engine. I've never had problems scraping my hands as the video states. What I do to rectify that when bordering walls and fences is I hold the handle and control bars with one of my hands while I walk to the side of the machine like what one does with a roto tiller. If there is too much to run into, I gear the trans down to the slow speed (Honda commercial mowers have hydrostatic transmissions with nine "clicks") The Honda commercial mowers have shaft drive transmissions while most everything on the market has belt drive. Honda mowers also have true blade brake clutches (Roto-Stop) while the time masters probably use belts...again. Honda mowers, unlike the side discharge on the time master units are side discharge, but the deck is closer to the edges as you don't have a chute that suspends the deck six inches from a wall or fence. Clipping dispersal is also better on a Honda as it sprays the clippings evenly over the lawn unlike the other makes. Side discharge is an option unlike the mulching plug with the Honda commercial series. Honda mowers have a "high vacuum" deck which works well for bagging and side discharge. I usually like the fact that when bagging, leaves and grass are usually pulled into the mower like it is vacuumed, in fact, I use my baggers in the fall to collect leaves. As the video states, the wider the deck, the less time at a job, however I use the Honda on some lawns as a "trimmer mower" and use my lawn tractor for the rest, thus the 42" deck beats 30" any day. I'm not sure if it's worth spending the money on a Time Master-style machine or get a lawn tractor for about the same with a larger deck. The other plus is with a lawn tractor or a sub-compact utility tractor like the Kubota BX series is you can potentially get more use out of it over an annum (year) over a dedicated lawn mower. The other option is try to find a walk behind tractor with a large mower deck like a BCS or if you don't plan on using it that much for the amount of money but you want to do other tasks with it, maybe a Troy-Bilt Flex system.

[@25-8]

+WJCTechyman thanks for all of your comment, I really appreciate the time you took to write it. I ended up purchasing the hrc216hxa 2015model they had at my nearest local dealer for $1,140 without tax. I thought it was a good buy since the competition had it for $1,150-1200. I really like the mower been having it for two weeks now and just did my first oil change. I just have one issue and that is maneuvering in small lawns, it seems a bit frustrating to almost feel better just pushing it without the clutch in tight areas. I know this is because of the weight, but I will trade that with the amount of grass it collects like you said because of its design, I'm truly impressed and love how it has manhandled my bi weekly yards with no bogging even on wet grass. Can you give some tips on maneuvering? I'm so used to the old late 90's Toro's but with honda engines too, they are very reliable and always start on the first pull. Also, when I sweat, it seems to fall on the blade lever and clutch, I notice it becomes slippery and my left hand seems a little fatigue when holding the blade lever, I seen some videos where people have some padding sort of bubble shape around them. It seems to make sense because I been pretty harsh when grappling it and I noticed right away the first two days it scratched on the bars.

[@WJCTechyman]

+The Prodigal Son Hmm...Small lawns with this machine (or at least with my HR(A)214SX) can be awkward, I usually do a back and forth motion like operating a vacuum cleaner. I usually cannot do the concentric spiral or striping around this kind of yard due to a number of objects like furniture so I take my time. I wonder, can you pull the commercial mower hst backwards like I can with my two speed transmission? I would imagine this is possible but I haven't used one of those specific machines before.

[@WJCTechyman]

+The Prodigal Son I forgot to comment about the sweat issue. Since my mowers are 25+ years old, I haven't had an issue with this and the fact that I don't use the machines as heavily as you do, but you may be able to get away with adding some padding like some cyclists wrap around their road bike handles or what people add to the steering wheels of their cars but I don't know how much clearance and play the hydrostat and roto-stop levers will require. I looked at the propulsion engage lever on a commerial Honda with an HST seems to somehow link up with the speed control next to the throttle control. On my older machines, there's a separate cable for the propel lever from the cable that selects between the two speeds. The Roto-Stop lever is of a different design to mine as well as on my machine. The roto-stop lever on the newer machines is full length and it seems when you push the little yellow button it engages a metal bracket that the cable is attached and when pushing it forward it pulls said bracket. With mine, the orange button raises a catch hook that unlocks the whole assembly so that then I can engage the blade.

[@jonservice]

the Honda's hand position while more vulnerable (which has never been an issue in my 5 years with one) is more comfortable and ergonomic. Honda Makes an almost perfect machine.

[@twosencefromcleveland6084]

HECK YEA!

[@trevorhoffman1612]

yes until a mail box comes out

[@super20dan]

good honest review . i am waiting for toro to come out for a real multi speed trans that pulls up hill on the 30

[@colestaples2010]

super20dan if exmark makes the 30 a hydro drive the price will be over 3000. No one would buy it vs the 36 walk behinds. Don't hold your breath!

[@bulletindiesel1548]

Hey man good job discribing this you have convinced me

[@muslimninjaassassin2498]

Am looking into it because I want to get my lawn done sooner, Am also dealing with starting a buessned I wasn't really ready for....

[@johnnywishbone1349]

Toro has a new 30 inch HDX with new Kohler 200cc engine and upgraded the transmission. Did you hear about/get one of these? My Honda HRC216 has been great for my first year cutting my personal yard, just takes time.

[@jimmydickson8854]

That was a very good down to earth review thank you top marks mate

[@geraldssouthernlawnservice7884]

great video and great information. A lot of good things to think about when trying to make a decision. I grew up with Snapper mowers so when I started my lawn service I started with the residential snapper self propel and eventually got the commercial self propel. I have always had good luck with snapper. Of course they have a couple Cons but overall a good mower

[@JamesTyreeII]

Gerald's Southern Lawn Service Please say more about the Snapper. Seems like they are nice and basic and last forever and simple

[@southernlandscapedesigns8081]

Just curious, why do you push mow so much? I had a maintenance division for 10 years, & after the first 2 years, we only used walk behinds, 36", & 44" fixed and floating decks. We literally didn't have any properties where we needed a push mower. Now, I only push mow my property and my Dads, also curious if you would suggest, another Honda HRC 216, Toro 21, Exmark 21, or YBravo for 1 acre of flat lawn.

[@Jerry-me1fy]

Which commercial lawn mower does the best bagging grass without clogging up?

[@rbljackson]

I think you nailed it. I have both the exmark30s, and the Honda HRC216. Here are a few adds; Exmark 30 w/kawi engine has an oil filter, Honda doesn't. On the flip side, the Honda engine gets my nod for slightly better reliability, and the air filter is a better design on the Honda. The exmark with kawi engine air filter set up, although quick/easy to change, doesn't do as good a job at filtering IMO. Both mowers are built like tanks. The Honda required less maintenance as well. To explain, there are no belt tensions to adjust. With the exmark 30, you will have to adjust the blade engagement and drive cables from time to time, and change the belts, primarily the blade engagement belt. Over time we notice that we loose blade speed in thicker grass even after adjusting the cable, and it appears that the belt is slipping within the pulleys instead of grabbing in the V. It will sound similar to the engine bogging, but its the belt slippage causing the blades to slow down. Like you, I prefer to run the exmark 30's for the speed, but there aint NO WAY im selling my Honda. Its the perfect back up mower. One other note about the Honda; it can cut at a lower height than the exmark 30 from what we have noticed. The exmark 30 when set to the lowest wheel position on the front and back will sometimes cause problems on inconsistent lawns, and drag. Because the 21 has a smaller footprint overall, you can cut at a lower height without "dragging" the deck when the lawns are uneven and/or not level. With all I have said let me finish with this; I would not rely on one Exmark30 as my ONLY mower. The reliability hasn't been as good as the Honda. I have two exmark 30's, so its not too big a problem if one goes down. With either of these mowers, I would suggest buying a back up, even if its just a toro super recycler or something like that as a back up! Last comment; if I was just mowing my own lawn, and wasn't concerned with speed, (assuming its for a smaller sized yard) I would buy the Honda HRC 216! Its a pleasure to mow with and the trans/speed control is better especially if you want to move slow and steady! For business, time is money, so the exmarks can get the vote for that application. Wow...I think this is my longest comment on youtube so far!

[@James-uc2nd]

+rbljackson i agree...just spent 20min reading this

[@twosencefromcleveland6084]

Many operators love that you can get the 30" mower up to 4 inches. I don't know of any other walk behind 30" or smaller that will. If growing most non-creeping grasses, 3" is minimum.

[@WJCTechyman]

I liked the Toro mowers I have had over the years, but I have always gotten a better cut with my Hondas than Toros at a lower setting. Not as much scalping as the Toros if that makes any sense for machines designed by a manufacturer known for golf course machines. I even had a Toro 26626 with a 4 stroke Suzuki that had an anti-scalp plate on the blade and it still scalped the lawn!

[@WJCTechyman]

+twosence fromcleveland Oddly, one of my customers wants it shorter than 3". Undescribably, their lawn still grows and is also very healthy.

[@twosencefromcleveland6084]

A creeping grass?

[@tony7470]

You didn’t mention that on the commercial Honda, if you’re mulching leaves the exhaust being in the front will blow leaves out of your pathway, making it a little more difficult to mulch them. And the commercial Hondas are too hard to get right now.

[@joej.4170]

The Honda hrc216hxa is the best 21" mower period. I live in Seattle and it rains a ton, you have to be able to cut wet grass. I never mulch anything, only bag. Mulching in Seattle will leave a huge mess the grass is way thick and would leave clumps everywhere. The bagging ability on the HRC is second to none. Honda is what makes a commercial operator the most money.

[@campbellpaul]

I would definitely purchase a quality 30" mower if I had more than one commercial account in excess of 1/8 acre in size. Nowadays, you need to have commercial accounts to succeed. You can find really good local deals on Craigslist in the off season...

[@imperialservices9892]

Nice video I'm tossing and turning on a 30" toro or 32" Wright stand on I have small gates Does toro have the blade problem or is it just buy some better blades the day you buy it Thanks

[@tonyslawncare]

I have a toro commercial 30 and a exmark 21 wish the 21 could side discharge

[@benjaminjwilson6694]

I just got a 38" rider and will trim a bit more.

[@gatorgator7728]

When will honda make commercial self-propelled with a 30" deck?

[@jesseg817]

How is gas usage? Which waste more gas? Tank size?

[@stevmstng5165]

What about maintenance. Does your 21’s run trouble free compared to the 30’s. Which ones are in the shop more. Downtime is a big factor in mowers as well

[@sweetlovetiger]

hey bro there is a drain plug on the bottom of all mowers most take the ratchet end but a good extension is the best to do it with. I thought I through that out there so you can do it easier

[@twosencefromcleveland6084]

On those 30s it drops on the frame plates and runs all over. If they have a hose or diverting pipe, the ID is so small the oil comes out very slowly. Tuning them up saves a lot of time. It does seem crude though.

[@sweetlovetiger]

there was some bigger eng have both side and bottom but yes if it only comes out the side cutting a hose in half helps keep it running every where

[@ascencionloera471]

What's the difference in a cut on the toro mower? Or exmarx 30 inches? I have a 217 Honda mower and it does a fine cut. I haven't tried the other mowers.

[@WilliFlow117]

I have 2 hondas,2 craftsman,3 troybilts.2 of my Troybilts I have been using for over 15yrs.Nonetheless, all works with simple care but i notice only my Troybilts starts on a drop of a dime after a season or two.Of course all motor requires some maintenance after awhile.However when it comes to longevity and performance,Troybilts is the one for me.

[@thomaslopez733]

Great review! I would recommend the Ybravo 25 inch cut mowers. These are commercial mowers and come with a kawasaki engine. For me personally, I think a 30 inch deck combined with a 6 hp engine is just too underpowered. But that's just me. I've used the 30 inch Toros and just think they're too heavy and are just too underpowered. If I need something larger than my 25 inch mower then I just use my zero turn.

[@WJCTechyman]

My Hondas have 3.5hp GXV120 (originally rated at 4hp but the equivalent GX120 engine is rated at 3.5hp now) and it does just fine. The Honda Commercial mowers may be a bit overkill at 5.5hp GXV160 engines.

[@adamotto2977]

Thomas Lopez I would love to see Ambro's do a 3-way review with a commercial 21", a Ybravo 25, and a commercial 30"!

[@mero40k]

You really should put the products youre reviewing in the description with a link.

[@MishaDaBear]

Have you tried a 36" walk mower? I have an antique 1990 JD GS25 it is Kawasaki powered and almost indestructible in commercial service!

[@theallaroundguy2399]

You didn’t even talk about cut quality did you? That is really the main thing that matters. The cut quality of the Honda is in a league of its own.

[@joshuawarrington1051]

I’ve got a mower from 2001 and to adjust the height it’s a simple handle with a button and that’s it one handle does all the work and it’s also on springs so lifting the 40kg mower is effortless, plus it has a electric start and a drive function it’s a 50cc 5.5hp Briggs and Stratton engine and still runs silky smooth today. Overall a very easy to work with lawnmower. I also think paying £580 when it was new was a grate idea for how long it’s lasted. but still never understood why it has a throttle if anyone knows why?

[@stephenmacdonald76]

this is a great video, we are thinking of going for a toro 30 in an area we had been using a scag 48

[@twosencefromcleveland6084]

Keep the Scag!

[@threelakeslandscaping3210]

Why can't we get a sef propelled commercial push mower with front casters. Do they really want me to buy a cub cadet

[@scrogathon]

Should I buy lightly used hrc216 for 1000$ canadian. the msrp here is 1400 plus 13% tax.

[@davidlee108]

With the Honda HRX217 have you had issues with it leaving a lot of mohawks? If so what did you do to remedy this? I'm having issues with mine ALWAYS leaving uncut grass even if I do a 50% overlapping pass. Full mulch mode at 2.5" or 3" cut height. If it didn't do this, I'd be completely in love with it.

[@troytinkham5586]

David....happens to me all the time. I look at my neighbors lawns with their Husky and Lawnboys and am jealous on the cut quality. I've done new blades/resharpened. Nothing helps and it's irritating especially because I bought the plastic deck, but after 3 years of using it....well it's time to move on.

[@gls3894]

Ive never had this issue with my HRX 217. Mine , hands down the best cut quality of any mower I own. Your rpm may be low and/or spindle problem. Max no load on HRX is 3100 rpm. You may also want to check that the Versa mow is actually sealed properly when on full mulch. Even with a small opening will alter the lift.

[@gls3894]

Whoops...just realizwd you comment is 2 yrs old..LOL...Ill keep my responnse posted as it may help others

[@billstiem6035]

Very informative review. Thank you.

[@KVW22]

My toro commercial 21 inch was just over $1000, can't go wrong

[@VOICEFORFREEDOM1776]

HEY SINCE THIS VIDEO WAS 5 YEARS AGO...., HAPPY 10TH YEAR ANNIVERSARY!!!!!!!?

[@matthewlehman9496]

Thanks for the info. I can't decide between the 30" Toro Timemaster or a self propelled standard width mower. Is the extra width really worth the cost and is the new 2017 Toro better than the previous models that had so many transmission problems. I also have a somewhat hilly yard, not crazy but inclined. Would I be better off with a AWS standard width or is rear wheel just as good as AWD?

[@CashensPowerwashing]

rear wheel drive in my opinion is the best. i have mowed hundreds of yards with my toro personal pace 22" recycler. it is a hell of a mower its the model with the tecumseh and electric start.

[@weakcannow]

how fast can a lawn mower like the the exmark go and how much weight do you think it can tow

[@twosencefromcleveland6084]

Sorry, not enough traction for a sulky. May work on super level short grass.

[@WJCTechyman]

Theoretically, the Honda could be powerful enough to be modified into a rider...I wouldn't try it but I wouldn't be surprised someone tried.

[@joshhubbard59]

the thing I am curious about is how well the toro 30" does in thick grass compared to the honda with the larger motor pushing a smaller/single blade... I would think the honda would win?

[@AmbrosLandscapingInc]

The honda is way better since it does have the double stacked blade so the clippings are smaller compared to the 30's

[@JUAN120484]

I’m starting lawn care here in Florida what Honda model number for start doing residential

[@joshhubbard59]

@@JUAN120484 I use the HRX 217 Works great. I like the extra power for tall/thick grass

[@GeniusVisualss]

is 30 inch sort of like a push zero turn wheel wise?

[@kevinshuman7342]

Very good information, thank you

[@hunterkennedy2429]

I like the 21, I don't use push mowers a lot, I know my Honda will mulch 6 inches of grass in one pass and it was crabgrass so thick and wet. and also better on hills. and cost of course got mine 100$ off.

[@greenergardens604]

Great video. I use two honda commercial mowers. And i use toro turfmaster. very heavy. i agree toro saves time but only on flat ground. And honda mowers you can't hurt the engine they just keep going and going. Steve Greener Gardens

[@WJCTechyman]

Regarding the Honda engines, you're right, they're pretty darned durable as I have two Honda mowers that are almost as old as me (31) and they are still quite reliable.

[@CarlosGarcia-xj5mg]

where did you get your jacket made at?

[@penmaster615]

I like 21s, they go everywhere like you mentioned, although i would try a 30 if i came across a deal, i have a troy built with Honda motor now. Its ok, upgrade is coming soon, love the vib very detailed!

[@timandes4114]

Here is another channel that compares the two different mowers. kzbin.info/www/bejne/gZS6YpuJja5rpNk

[@hunkydude322]

ive owned my honda hrc since 1993 i paid approx 900 dollars, and still runs like a champ, those other mowers dont even come close. like u siad its up to u and your circumstances etc.................. the hrc runs even better than a cadillac.

[@WJCTechyman]

I have HR(A)214SX, the makes of Hondas before the Commercial designation, the HRA214SX is probably most like your unit with a steel deck as the Commercial machines decks were near identical to the HRA decks. The HR214 on the other hand has an aluminum deck.

[@andyjame6835]

This really worked

[@James-uc2nd]

great video and mowers....when i saw the video i was like the toro is john cenA and he was vs the ref is the honda

[@Neonbiker]

But of course I have several push mowers ... 2 toros both are 22 inch and one Troy built which I got for free it's a 21 inch the stripes it gives you are nice ... I have 21 commercial John mower that you make the front wheels swivel I only used it once and I can't get the spark plug off of it to replace it ... I might end up selling the John Deere for $300 because that's how much I paid for it

[@AmbrosLandscapingInc]

Which push mower brand and size do you guys prefer?

[@stevenb6984]

My top 2 21" walkbehind I have used: The John Deere 14SB (1993 Model) and Honda HRX2174HYA (2014 Model) Champion: JD 14SB! Why: The 14SB was built like a tank. 23 years later it still kicks @$$ and has outlived the other 4 John Deere's I have had. Like the TORO's (which I have used) your hands are positioned right in the middle when using the mower and are less likely to get hit by a branch or get scraped by a concrete/stone wall. The Honda HRX is pretty darn close to the 14SB though! Both machines bag and mulch grass near the same with plenty of power. I find that around my area with the types of grass that the Honda acutally mulches clippings better than the TORO'S, which is what they're (TORO) are know for! I agree that on the Honda, positioning of hands makes it easier to scrape them up and bulkier to turn to get the straight line and stripe. I let you know if the Honda becomes the top dog in 23 years when the 14SB is 46 yrs old and still plugging along!

[@juvieguy]

+Steven B The 14SB is a beast! I retired mine two years ago after more than 20 years service. I replaced the deck from a used parts mower, the transmission was replaced a few years ago, wheels several times but the engine was original. I really abused that thing, changed the oil very infrequently, mowed over rough ground, etc. It was a slow starter in the spring, but once started it wouldn't stop! I replaced it with a Honda HRX which I really love.

[@stevenb6984]

+juvieguy I know! Last september, I purchased a 1994 14SE with a busted deck but good engine and transmission to use as parts for the 14SB. Mine is a 1993 with the Kawasaki 5.0 hp FC-150V-CS00 and the Ogura Blade Brake Clutch. Its sorta an oddball because the engine was made in Japan. I actually had the engine base replaced last year (yeah, wont be doing that again $$$) after it cracked when changing oil. Did your 14SB have the Warner BBC or the Ogura BBC? Since 2008, mine makes a screechy windy like noise which I think it needs to be replaced. But then I was thinking it might be the top engine bearing, but I don't think it would have lasted this long like that?

[@theredhotchilipeppersgetaw1735]

+Ambro's Landscaping Inc. i have a small murray push mower that's at least 15 years old, it's in the 20 inch area, but i might try to get a commercial this year, and my weed whip and blowers are all commercial

[@hallnoats4ever]

How come no one uses John Deere mowers

[@cherylwolverton9906]

Is there a way to weight down the front of the Hondas?

[@pauls3423]

There are 3 ways ... 1. Don't bag grass just mulch. 2. Bag but empty it more often. 3. Put a sand bag on the front of the deck. Oops there's 4. He was talking about the Honda HRX217 with a light nexite deck...so you could get a heavy steel deck HRC216 which is a tank.

[@jaybrown29]

The thing I hate about the commercial 21s is that there isn't a side discharge. When it's wet it clogs because you can't side discharge.

[@southernlandscapedesigns8081]

Which brand? Honda HRC & YBravo both make chutes for about $60.

[@santosgalvan6076]

Do you think it's worth getting a 30" if we already have a 32" walk behind?

[@AmbrosLandscapingInc]

santos galvan no I don't. After having a 32" you will be disappointed with the lack of power that you get from your 30"

[@badboymowersofnorman6011]

Last year for honda push mowers! 2023 Try BadBoy

[@Boodieman72]

How well do the 30" mowers do in mulching?

[@darkviper6634]

Check out 9:32

[@greginaustinTX]

man thank you so much for this

[@FloridaNative83]

Obviously you’re a toro kid. The Honda hands down is the best cutting machine on the market. I’m sure the toro and ex mark are a better buy for commercial guys that are looking at time management but the homeowner will always be better off with the Honda!

[@AmbrosLandscapingInc]

Ya I'm no where close to a Toro fan...watch my other videos and I will pick a Honda any day over a Toro. Plus I also sold my toros and still have my Hondas.

[@ru42112]

@@AmbrosLandscapingInc What height do you mow at? I have my cub cadet all the way up and it's still to low. It doesn't mulch worth shit. I bought it for one acre. Wish I would have bought something else. Maybe I can put larger wheels on to raise it up higher. I mulch ever time.

[@roadstar499]

i wish they would make a 30'' like the toro with no rive system... i really rather use my own strength to move it... they could cut the weight .less things to break,and cut the price down... I just don't get how everyone wants a mower to move its self...

[@TRICK-OR-TREAT236]

THE ONE THING (AND AN IMPORTANT ONE) YOU DIDN'T MENTION IS HOW WELL DID THEY CUT OR MORE SPECIFICALLY HOW EVEN THE CUT WAS. DID THE WIDE AND MORE HEAVILY WEIGHTED TIRES ON THE 30" IN. FLATTEN THE GRASS WHEN YOU CUT? THEN WHEN YOU DO YOUR OVERLAP CUT YOU WIND UP WITH AN UNEVEN CUT ONCE THE GRASS POPS BACK UP LATER. I'VE HEARD TWIN BLADE MOWERS USUALLY DON'T CUT AS WELL AS A SINGLE BLADE.

[@twosencefromcleveland6084]

Watch SEF the lawn surgeon some.

[@TRICK-OR-TREAT236]

BOZO LARSON ! LMFAO ! THAT'S FUNNY HA HA HA ! DIPSHIT !

[@twosencefromcleveland6084]

Can we leave the bickering to the political guys? We're trying to have fun here...

[@ronhughley6510]

Lowes. Smokey point.

[@JoseRamos-tg8vy]

hey i like your video . I need you revie a husqvarnahu800 awd vs 30"exmark on next please thx

[@andreabond3501]

Solution for wet lawn clogging front wheel drive grass goes straight in bag

[@Grassology-vs1hn]

Who designed your logo ?

[@raredesign]

I’m looking at getting the time master, because my stupid 3in1 21” Honda that was supposed to be “amazing” can’t cut the grass even anymore, due to what I think is a bad shaft bearing. Never hit a rock or anything as my yard is manicured and clear (no trees). I’m extremely disappointed in Honda!

[@johnmacrae9208]

21 is better anything larger might as well be a Write, Skag , Ferris or Kubota or something like that

[@nippinkoi8924]

Biggest we can get over here in the uk is 22" walk behind Hondas £1200

[@johnscimeca9078]

instead of using these 30-inch mowers I just buy a 32-inch walk behind

[@ronhughley6510]

Isn't exmark an Toro the same. Like exmark is just commercialized Toro. ??

[@travis10ist]

Ron Hughley yea they are

[@Neonbiker]

22 inch toro saves you time as well it's bigger then 21 inch

[@theredhotchilipeppersgetaw1735]

+Ryan Horomanski that extra inch must mean a lot to you, then, even though it's just ONE inch

[@johnbailey2034]

I would just buy another better mower like the wright hydro 32 cut. Might be mow money but will last much longer and just a lot better mower.

[@separatistdroid8855]

30 is so fucking good trust me!

[@joshsipes7404]

What is the song in the intro

[@pointman1921]

It's called "My blown speakers" (feat: small air horns)

[@JoeBlow-24]

I've thrown in the towel on commercial push mowers at this point, I had 2 Exmark 30s that were nightmares, mine got to the point they would barley self propel and 2 hondas that were getting pretty dated. So I said screw it I didn't want to spend 5k on push mowers so I went and got 4 Troy-bilt tb360s, the drive system on them takes some getting used (exmark and toro have personal pace, mine did not but its similar if not the same system) and they don't have PTOs but other than that they are some of the nicest push mowers I have ever used, light fast and plenty strong. Those cost me just over $1500 iirc.

[@RedRockMaintenance]

I have the toro turf master. It does save time, but its a crappy mower. It has no power, constantly clogs and the self propel hardly works. Don't think I would buy it ever again.

[@BrandonMasseyGaming]

Where did you get your hrc at ?

[@jamesgoddard8375]

Red Rock Maintenance I've found the same with my time master, worst mower ever

[@colestaples2010]

Red Rock Maintenance, its a great mower in the proper hands. Learn proper maintenance and you won't have problems

[@jerryr838]

Fuck Honda it’s burned out everyone has it haha get the new 2018 improved toro turf master the best 😍

[@ronhughley6510]

That's heavy lawn mower. My 21" self propelled electric start, rear wheel drive. Rear bagger is like under 100lb. I can lift it alone. Good video. Thanks .

[@zachzimmerman7076]

I like exmark

[@SeanLawn71]

I have a 30” Toro and 21” Toro Commercial. Not impressed with the newer generation of Toro 21” mowers. Considering a Honda Commercial.

[@wpaia]

Of coarse you have ro think about the warranty too... now which company will likely screw you over.... toro

[@AmbrosLandscapingInc]

Completely agree man

[@johnk696]

I've got a Toro 30" Timemaster and a Honda Model # 663030. The Honda is by far my go-to mower. Wasn't a huge fan of the amount of plastic at first compared to the model this newly redesigned engine replaced on the same model the years before that were mostly metal parts. But it's like with newer cars these days there's just simply going to be more uses with plastics as they've actually come a very long way and the plastic parts are well made. Makes the mower lighter for sure. Plus fewer issues with more metal parts rusting. I currently have the Toro Timemaster listed for sale. It starts first pull like it did on day one and I'm selling for $250.00 which is very cheap for this mower. It's just too heavy and in the way.

[@bigtexas7580]

Honda all the way. $2000 for a push mower, no way.

[@tannergunsell1651]

1700 for the Honda mate

[@mahendramukhram4288]

I bought that Honda 10 mouth ago having a lot of problems with it . right now it is in the shop for repair.i paid almost $13 hundred.

[@jaystone3516]

cub cadet sells 33 in mower

[@CottonBoxer]

never should have been a vs with 30" vs 21" they are obviously for different types of users. another thing is the honda motors. from research their motors are fine it's the rest of the machine that sucks really badly. btw i have been reviewing them for 2 yrs

[@1smokeyj350]

You must be talking about the home depot Honda 217 mine never lefts up even with a heavy bag 216 commercial out powers toro and ex mowers anyway plus the tranny’s are way better

[@ronhughley6510]

The 30 " mowers just need a bigger more powerful transmission, that's geared/torqued down right. So it goes when it's suppose to. An stays going.

[@starfireolivier1452]

honda ,no collect wet grass!!!! yes !! wolf , etesia made in france