American Bench Grinder Restoration - Restoration Videos

[@meinemechaniker]

Thank you for watching. Don't forget to ''Subscribe''

[@sebyrar]

Hello, I'm part of those people who like to see those electrical machine running at the end of the video ! #restoreforlife #Thanx

[@meinemechaniker]

I will use this machine in the next videos.

[@RestorationVideo]

*_Like it, you did a perfect restoration_*

[@spookyalot3886]

Did anyone else get the Nutella ad while watching this. 😂 Great restoration.

[@dingsbums1627]

Ich hatte bei einer Schraubstockrestaurierung diesen alten Schleifer in Aktion gesehen und dachte mir schon, dass du ihn dir vornehmen wirst. Tut einfach gut, so detaillierte und gewissenhafte Arbeit zu sehen. Kommt ja leider aus der Mode. Die Kollegen aus dem Werkzeugbau hatte ich schon mit deinen Videos angefixt. 🤣 Die sind bei so etwas ebenfalls sehr genau und lieben auch solch gute Arbeit.

[@meinemechaniker]

Ich freue mich, dass es dir gefallen hat, danke.

[@dingsbums1627]

@@meinemechaniker , sehr gerne. Du machst nun einmal einen tollen Job.

[@adige_knife5032]

Bir çalıştırıp test yapsaydın tam olacaktı Ellerine sağlık👏🏻👏🏻👏🏻

[@meinemechaniker]

Sonraki tüm videolarda bu polisaj makinasını kullandım. 🙏🏻 ve kullanmaya devam ediyorum.

[@adige_knife5032]

@@meinemechaniker gördüm tabiki de mesela bıçak yapınca kesmesini test etmek gibi... İlgi ile takip ediyorum 😀

[@meinemechaniker]

@@adige_knife5032 test görüntüleri yanlışlıkla silinmişti 🙏🏻

[@flashgordon6238]

Perfect choice on the paint. I've used that myself. That wire wheel is going to grab those wool-like fabric gloves and pull your hand and fingers right into the bristles. Switch to some leather gloves for wire wheel work.

[@meinemechaniker]

Thank you for your suggestion.

[@jonny555ive]

100% agree. Safety first. Good lookin out Flash Gordon 👍👍

[@kyleklug7879]

In all fairness you shouldn't wear gloves at all while using any grinder, without gloves you'll only have a cut or burn.

[@Le0nCLA-FL]

Kardeşim müthiş işler çıkartıyorsun özellikle kpss füzesi süperdi. 😂🤣 👍

[@meinemechaniker]

😉🙏🏻

[@bencrawshaw1227]

That old polishing machine was probably state of the art when fIrst built.

[@Multantechinfo]

nice video

[@adetoye50]

Turned out very much beautiful and NEW

[@rbyaldrzee6657]

Beatiful 👍

[@josephalexander3884]

I really enjoy that Hammerite paint.

[@cesarventura2332]

Very nice .

[@joshredding9588]

The color is spot on !!! Excellent work!!!

[@meinemechaniker]

thanks

[@Racedoc]

Red Wing is well respected grinder similar to Baldor. It is widely used for dental work. Excellent polishing/grinding machines.

[@michaeldavid4227]

congratulations friend great job

[@mattbannan637]

COOL, WAY COOL!!!

[@TayfunBilge]

Süper bir dönüşüm, eline sağlık.

[@meinemechaniker]

Teşekkürler

[@mercoid]

Love that pulling device.

[@toniatalley1977]

Amazing

[@cannoncolossus2449]

Awesome restoration! I’ve always liked that blue/green color for some reason.

[@meinemechaniker]

Thank you. I have plenty of blue and green paint. 😉

[@anwarishakruppa4397]

Good service 👍

[@meinemechaniker]

👍

[@frick566]

Nice resto!..always love the hammered paint!

[@meinemechaniker]

l agree

[@mookystank]

At first I wondered, "Why isn't he using the bench grinder with the buffing wheel to polish the parts?" Then I remembered that he's restoring it, lol.

[@jusb1066]

Well worth saving and very handy around the workshop

[@meinemechaniker]

Thank you

[@supersevenn]

dude...you gotta turn it on! hahaha. nice refurbish

[@ftswarbill]

It's cool when you use other restored items (Tools) to restore newer items.

[@meinemechaniker]

👍

[@marymasden5333]

Love the color

[@RestorationbyAlabamaCreeks]

Let it run! Run with the wind!

[@meinemechaniker]

👍

[@burakmutlu4636]

Very good 👏🏼👏🏼

[@memetsu1472]

Bravo sana tebrikler

[@meinemechaniker]

Teşekkürler 👌

[@serdarkaral5180]

Bir wilton mengene bir metabo taş motoru bir de bu hayran kaldım. O kadar takip ederim bir almanya bölgesi bir ruslar bir de sen üstad :) Türkiye de senden başka olduğunu zannetmiyorum. Kullandığın makinaların hepsinin bosch pro olması ayrı güzel :)

[@meinemechaniker]

Teşekkür ederim 🙏🏻 benim favorimde yarın sabah yayında olacak 🤚

[@serdarkaral5180]

@@meinemechaniker keşke Samsun'da olsan yanında çırak olarak yarın başlasam 😂

[@Bannimann2]

Very well done. 👍👍👍

[@meinemechaniker]

Thanks 👍

[@Copyright-OO7]

Very good job sir....☺️

[@meinemechaniker]

Thanks ssr 🙏🏻🌿

[@rirkc]

Yine güzel bir iş. Teşekkür ederim arkadaşım. Daha fazla lütfen

[@meinemechaniker]

👍 teşekkür ederim

[@c.n.bn.b6239]

ficou novo e muito funcional amei

[@meinemechaniker]

Thanks sir

[@Tatal.b]

Bonito de se ver e, de admirar quando algo é bem feito por quem entende P. A. R. A. B. É. N. S que DEUS o abençoe dando muita saúde, iluminando sempre tua mente, dando-te prosperidade e muito e muito sucesso na sua longa caminhada. 👍👏🙏🍀🇧🇷

[@meinemechaniker]

🙏🏻🌿 obrigado

[@halukonal1400]

KPSS kitabı en sonunda bir işe yaramış 😀

[@meinemechaniker]

Başka bir işe yarayacağı yoktu 😉

[@halukonal1400]

Güzel restorasyon bu arada , elinize sağlık 👍👏

[@meinemechaniker]

Teşekkürler 👍🏿

[@More-Space-In-Ear]

Sweet. 👍🏼

[@meinemechaniker]

👌

[@kjamison5951]

Good job!

[@Zekitaser]

Harika😊👏🏻👏🏻👏🏻👍🏻

[@meinemechaniker]

Teşekkürler 👍🇹🇷

[@adriamiraguilar]

Excelente !!!

[@ahmetkoylu2797]

Eline sağlık abi

[@meinemechaniker]

Teşekkür ederim 👍

[@markharrisllb]

Beautiful, I like how you got the colour so close to the original.

[@meinemechaniker]

Thanks 👍

[@rudysaldivar4228]

Greet job. I’m going to restore a metal bandsaw soon and will definitely use the green hammered paint. It has been sitting outside for 45 years. By the way. When you hammer in a bearing, never use the inner race as the face that will receive the blow. Always the outer race.

[@meinemechaniker]

Thanks 👍

[@mehpekmezci]

I agree with Rudy Saldivar.

[@ozlemecevit526]

Bon travail ! Je suis stupéfaite par le résultat 😍

[@wrchung]

So does it work?

[@meinemechaniker]

if you want to test video, you can check the next videos 👍

[@jefranke]

3-phase? Was looking at the five-conductor plug at the end...

[@meinemechaniker]

yes 3 phase 👍

[@shukriaziz6022]

working from heart - nice gob - the best

[@meinemechaniker]

Thanks 👍

[@patjohnson3100]

A power polisher is a very useful tool. Excellent work giving this one new life!

[@meinemechaniker]

Thank you 👍

[@hamroad1956]

We do not even know if it works or not: no demonstration. Poor form.

[@楊楊-k3o]

great job👍🏻

[@meinemechaniker]

Thank you 👍

[@myrocraft]

Well done! Excellent restoration. It is very good to have a polishing machine!

[@meinemechaniker]

Thank you

[@metalartRestoration123]

Cool RESTORATION👍

[@meinemechaniker]

Thank you 👍

[@patricklucki5368]

You need to do a restore on your drill press

[@meinemechaniker]

I did

[@LinomCardoso]

Magnífico trabalho! Assisti com prazer, parabéns e obrigado pelo compartilhar. Desde o extremo Sul do Brasil, envio um fraternal abraço.

[@meinemechaniker]

obrigado 👍

[@namesurname1872]

Show us how it works!

[@meinemechaniker]

You can see next videos👍

[@semihzirig]

Hallo mein Freund, ein kleiner Tipp von mir, bei einem 3,4,5 adligen Kabel ob flexibel oder nicht immer den grüngelben (Erdung) Kabel etwas länger lassen das beim zug an der klemme immer als letzter der grüngelbe sich lösen sollte wegen der Sicherheit.... war nur ein kleiner tipp

[@meinemechaniker]

Danke 🙏🏻🍀

[@semihzirig]

@@meinemechaniker 😊

[@emailapple645]

100/100

[@stevendepriest3143]

Great job. Love the hammered paint. Was wondering if you made it slightly thinner and did 2-3 coats would it take more abuse. Did you add an "on and off" label or plates?

[@meinemechaniker]

It would be wrong to thin it with thinner. It is best to do it once. 🤗

[@dave3156]

Without the marks on the manufacturer's plate, this would look brand new. Nice job. Are you keeping for your shop! Thx for sharing

[@ronaldclark1844]

Great job, I don't know what it does.

[@meinemechaniker]

Thank you Ronald 👍 it is polising machine ✔️

[@lobohelder]

congratulations got very good,Mr.David Copperfield's bearings kkk

[@meinemechaniker]

👍 thanks

[@dhruvapalaye9095]

5:45 that's a nice make-shift cleaner you made with a pipe hose and vacuum cleaner accessory; also get a bench vice preferably gressel :p

[@meinemechaniker]

gressel is not good vise;) I bought heuer;) because I'm meine mechaniker.

[@lukasz-or8dq]

You were trying to undo the spindle extension in wrong direction at the first time. Great work

[@meinemechaniker]

thank you I will consider your suggestions. 👍

[@JierusYT]

Really great job!

[@meinemechaniker]

thank you 👍

[@DeltaSteamSystems]

Great restoration. It would be nice if you tested it so we could see it working.

[@meinemechaniker]

Thanks, for test you can watch the next video 👍🤗🍀

[@rolibus2606]

Belle restauration ;))

[@meinemechaniker]

Merci

[@maharanii9708]

Three phase motor ?

[@meinemechaniker]

Yes theree phase motor 👍

[@valmirmm3921]

👏👏👏👏👏👏👏

[@meinemechaniker]

👍

[@stepcorngrumbleteats7683]

Very nice restoration ! I love the polish and the paint, and cheers for replacing the bearings, thank you for sharing.

[@meinemechaniker]

Thanks 👍

[@chrisjarvis4449]

another name for it is a lathe for polishing and grinding

[@de-javu1597]

This is amazing!

[@meinemechaniker]

🤙

[@shellyskye527]

This is really beautiful, but does it work?

[@meinemechaniker]

I use it all the time. look at the next videos, you will see.

[@howzatrestorations1538]

Great job mate, came up better than a new one.

[@meinemechaniker]

Thank you bro 👍

[@leslie8351]

Nice restoration, but you didn't 't show us it working...

[@meinemechaniker]

Thanks, pls watch next video 👍 l will show more

[@leslie8351]

@@meinemechaniker Thanks, looking forward to it.

[@meinemechaniker]

👌

[@mateoboschify]

Merica!

[@meinemechaniker]

👍

[@Viprus]

It's rare to see someone rewind the stator in restoration videos. I rewind them for a living and most people just avoid it like it's taboo to even think about touching it inside.

[@donaldfarr8162]

I seriously doubt that he rewound that himself. I too have worked in or around motor shops my whole life. Shops here won’t rewind fractional HP motors anymore. Just not worth it. He has skills so I guess it’s possible.

[@scroungasworkshop4663]

I think your comment is valid and probably a good thing. Rewinding a motor is beyond the scope of most home restorers and unless it’s a very special motor it isn’t financially viable to get it done. Most people also realise that doing it wrong on a mains voltage motor could end up with potentially deadly results.

[@t.rogers1298]

Never saw it running...?

[@EatSleepShift]

16:40 KPSS

[@moshebron2105]

Garwood NJ is 45 minutes from where I live

[@moshebron2105]

I wanted to see if the ladybug would fall in the hole!!!

[@toby8706]

You have to turn it on and try it ...cmon its a waste of time watching something build and not seeing it work!!!!!

[@meinemechaniker]

see all the next videos. you will see that it works.

[@КошмарКошмар-й2б]

Hi bro 👋👋👋 good to see you 🤝🤝🤝very good restoration grinding machine 👍👍👍🔥💣 I watched the video with admiration 👌🏽

[@meinemechaniker]

Thank you bro 👊

[@hobbitreet]

The title says that this a Polish bench grinder but the data plate indicates that it's a Red Wing made in New Jersey. A little help here please?

[@meinemechaniker]

Could you please copy the title and search for it by typing google.

[@markharrisllb]

Rob Wolford It’s a polishing bench grinder, hence the spindle, it’s not Polish as in made in Poland.

[@hobbitreet]

@@markharrisllb Sorry. That makes sense.

[@lotharfunke8749]

When are you gonna restore the post on your drill press?

[@meinemechaniker]

l dont understand

[@sindean]

@@meinemechaniker He means the column on your drill press is rusty and pitted.

[@michaellawrence6677]

You could have ran it. I’d love to have seen it moving.

[@meinemechaniker]

Pls next videos 🤗

[@АлександрКузнецов-ж5я]

Моя есть механерчук! Дас ист фантастиш!

[@MegaCAMARLENGO]

I'm waiting for running...

[@meinemechaniker]

next video, for test 👍

[@shannonmcstormy5021]

Also, can you explain or link how the "Rotor Balancing" works? I understand by watching it how it measures balance, but how does it "correct" imbalances?

[@meinemechaniker]

rotor balancing, just like balancing car tires. even the same.

[@jim_jim1674]

you did not turn it on because the motor was dead ?

[@meinemechaniker]

Are u sure🤗 pls watch next videos 😉

[@chagualitorubitona5920]

Peroooo.... Antes de echar la pintura verde policromada no hubiera sido bueno primero haber pintado con una base anticorrosiva? ///. Colombia/11/octubre /2020.

[@meinemechaniker]

Esta pintura que utilizo es una pintura especial. pintura martillo martillada. no se necesita imprimación en esta pintura.

[@chagualitorubitona5920]

@@meinemechaniker gracias por la información. Felicitaciones por el trabajo de restauración.

[@meinemechaniker]

👍

[@schuppe_bln]

And does it work? What is that for? I missed the final part 🤔 But the rest was nice 👌🏻

[@meinemechaniker]

Yers Final part is problem but in the next video you can see final part

[@ElcioThenorio]

Very good! But a little too dark... plz, put some more lights on. Congrats!

[@meinemechaniker]

thank you . I was shooting my videos outdoors. now I am working in a closed and more accurate workshop.

[@antrepenor]

You did the winding put back the motor and then open it again?

[@meinemechaniker]

yes l do

[@shannonmcstormy5021]

What brand of hand tools are those? Black with red ?

[@meinemechaniker]

which tools are you asking?

[@SefaEmre]

Türksün dimi :)

[@riccioriccio]

A question, why you have use a red spine to power the beanch grinder, n Italy we use that kind of spine for 380 volts industrial machine . Thanks for answer.

[@meinemechaniker]

exactly what minute of the video do you ask?

[@riccioriccio]

@@meinemechaniker 20:49

[@meinemechaniker]

@@riccioriccio I did not understand what you were hitting.

[@AntonioCarlos-sk3xi]

🔝👏👏

[@meinemechaniker]

Muchas gracias 👍

[@adrianrobal5612]

what kind of can opener do you use ? can you link ? i cannt find it :X

[@meinemechaniker]

Opener?

[@adrianrobal5612]

@@meinemechaniker 16:55. What are you using a wrench to open can ?

[@meinemechaniker]

@@adrianrobal5612 first aid scissors 🤗

[@adrianrobal5612]

@@meinemechaniker hooooooly.... Thanks 😅

[@jonlodi4307]

Why didn't you show it running and using it??