I like watching Americans that appreciate the quality of Knipex tools.
@SusiesRepeat4 ай бұрын
This Kiwi appreciates Knipex tools, have used them in my job for 30 plus years.
@Anza_34832Ай бұрын
🇩🇪, 🇩🇪 + 🇩🇪! Can’t get enough of it ❤️
@Max_Marz Жыл бұрын
my boss gave me a pair of the 7 inch pliers wrench and they havent left my pocket since, they've done me more favors than any multi tool ever has.
@coolbugfacts1234 Жыл бұрын
Another fantastic thing about the cobras and pliers wrench is you don't need to squeeze them, they get clamping pressure just from the top handle
@jackmclane182610 ай бұрын
The comfort grips are the same plastics as the VDE. So it is also the same insulation. It is just not certified. And it does not have the higher barriers so that it is easier to slip and touch a metal part in the front.
@fuloplehel Жыл бұрын
Great video and tools, I love the knipex tools, I have a lot of them, including scissors, utility knife, pipe cutters. The little stepcut cable shears are my favorite too.
@chrisfyfe9212 Жыл бұрын
Good call on the Knipex stuff ! Worth their weight in Gold !
@iangregoryhome Жыл бұрын
Great video, my favourite is the Knipex Notching Pliers 250 mm awesome wouldn't be without them.
@jeffwolf80188 ай бұрын
I love my 22 inch Cobras. If a plumbing fitting fights me I never have seen them fail me and huge 4 inch pipes not an issue for them
@timothywhieldon1971 Жыл бұрын
and yet i am living, i don't think im going to live better or not keep living with or without them.
@mikegraham7078 Жыл бұрын
Your #2 selection... the little shears. I have those, which I got to replace a pair of the regular non-toothy little shears. These things cut like nobody's business, but they do have one restriction - they're kind of just for cutting. The non-toothy ones I would use for stripping cable and larger conductors (#8 and up until they won't fit in the jaws) and it worked fantastic. The toothy one can't fit as big a conductor when you're coming at it side-on... you have to slide it over the cut end of a big cable. So I love the toothy ones for cutting cable, but I love the non-toothy ones for breaking down and stripping cable.
@tmucca93 Жыл бұрын
Bacho pliers are the goat for me . Can’t say anything bad about the knipex cobra though except in tight spaces I don’t like the button on the side. I’m a spark though so don’t know if plumbers get the same issues😅
@leealtmansr.3811 Жыл бұрын
Love my Knipex Tools. Great video 🎉
@jakeok741 Жыл бұрын
loving all the videos, upgrading all my tools to knipex pliers and investing in ways to save space because of your videos.
@nathanaelworthy10717 ай бұрын
No experience with these whatsoever, but if love to see you test some of the above suggestions, as well as maybe the knipex siphon pliers and hose clamp pliers perhaps?
@LuminairPrime8 ай бұрын
Angled bolt cutter is runner up!
@americanelectrician8 ай бұрын
They are so so good!
@curonelectricity Жыл бұрын
I like your video ❤❤❤❤❤
@Veau88 Жыл бұрын
Being a union tinner, i use gripples every day… the knipex wire rope cutters are amazing and cut as well as the first day i got them
@search_eternal Жыл бұрын
I have a couple of the Alligator ones and they are nice. I have a couple of the Doyle knock off Cobra style pliers from Harbor Fright and they are nice and work well.
@-_Robert_-2 ай бұрын
this 95 12 160 cable scissors exist with spring?
@ZeroThaHero666 Жыл бұрын
Their electronics snips/flush cuts/whatever you wanna call them kick ass too, at 5.5" they actually fit man hands unlike the teeny little flush cuts from Klein
@JackElectrician Жыл бұрын
Awesome Video!!!
@mufc99ok7 ай бұрын
Knipex are the best
@americanelectrician7 ай бұрын
Knipex is the goat
@JacobB-f9m Жыл бұрын
Could u make a video on how to become an electrician
@mikegraham7078 Жыл бұрын
I should point out that I am a big fan of Knipex, and I have probably 14 or so tools made by them. However, I am also a big fan of Milwaukee, and the Milwaukee high-leverage (7") 7-in-1 multi-purpose pliers have many of the same features of the multi-purpose Knipex pliers that you showed, but they will strip #10 stranded wire. They have a nice wide shear (which honestly doesn't open far enough to really cut anything thicker than a primary school pencil, but they are wide so you could cut #10-2 romex in one go. These also have a crimper on them, but it's pretty big. You won't be crimping onto #18 with these, that's for sure. They have lanyard holes (two of them) in case you work at heights. The gripping end is good and wide, but it has regular lineman's plier grips, without the slip-joint-type opening. Anyway, these are the best multi-purpose pliers that I have yet discovered.... and I have probably 8 of them from different manufacturers, including 3 other Milwaukee ones and some Klein ones and, indeed, two Knipex ones including the installation pliers that you show in your video.
@craigbraswell426911 ай бұрын
The strippers' head is AMAZING for pulling wire, I actually lobe the head design personally. I own a slew of knipex tools and kleins. The knipex on average is a much better tool. Other techs ask me why I buy such expensive hand tools and I tell them that I use them everyday, so why not?. Buy a tool for life, not a year or 2.
@Karfiphiftiphor2 ай бұрын
Hold them still will ya. Can't get a good look at them. Gosh darn it!
@americanelectrician2 ай бұрын
Sorry man. We’ve gotten a lot better with camera stuff recently
@edp9811 Жыл бұрын
I have none of these and I'm still alive and kicking
@miket217210 ай бұрын
For now.. ⚠️ lol
@HCheatNcool9 ай бұрын
Get you some! I really like the pliers wrench. Got the harbor freight knock offs and the real deal
@Tamperkele2 ай бұрын
You might be alive but can you really call it living?
@edp98112 ай бұрын
@@Tamperkele yes, most certainly
@marcosacevedo401028 күн бұрын
Its a joke?
@ironmantooltime7 ай бұрын
I'm sorry what, knipex is all for his glory? He really needs that? 😮
@adamstevens91969 ай бұрын
K-nipex 😂 k-nife k-night
@Blizzard4242 Жыл бұрын
It's actually not the right way to pronounce Knipex (it's actually more like "knee-pex" but with the "k" being pronounced as well), I watched a video where someone who works at Knipex gets asked how it's pronounced and he also admits that some people did pronounce it wrong on social media. It's in German, but maybe there are subtitles: kzbin.info/www/bejne/gHrLc6h-p5qdqq8si=qeRz7R16mqZHny8p
@naezro Жыл бұрын
My guy spent the money in the XXL. 😂
@jakearmstrong4563 Жыл бұрын
Dang, dude has a job and pays his own money to make the job potentially easier and faster. You don’t see that on the RYOBI aisle!
@naezro Жыл бұрын
@@jakearmstrong4563 How many jobs do you think he used it for?
@hemothy Жыл бұрын
@@naezrohe addressed it in another video, more than you’d think