2019-2022 RAM 1500 Rough Country 2-Inch Front Leveling N3 Struts Review & Install

[@AmericanTrucksRam]

Shop These Rough Country 2-Inch Front Leveling N3 Struts ! : amtrucks.at/3dus1Q8

[@FuriousFuria]

For Rebel owners with the factory 1" lift, do we need these 2" struts or the 3.5" version to level with the rear? Doesn't the Rebel's lift come from the current struts so swapping out for these will only net one extra inch of lift in the front? Thanks!

[@monroefive-o40]

Boy somebody has been beating the crap out of that spindle.

[@WooGnar]

I'm sure some Ecodiesel owners may look here and YES this kit 1000% fits and works. Rough Country only states "for V8" cause of weight, however the Ecodiesel is nearly identical in weight to the Hemi. It's fine and R.C. really screwed the pooch IMO on not including the Ecodiesel. The standard V6 is lighter and would be a 2.25" lift per various Ram forums.

[@jgarcia7322]

I installed a set on my 2024 RAM 1500 4 X 4. Easy install, better than stock ride. Didn't need to do anything to the rear wheels. The level was great. I will probably replace the rear stock shocks to enhance the rid more. This is the way to level any truck. The upper control arms are stock and not in a bind. I may change them later. Very satisfied with these struts.

[@MrJohney]

Make sure you change your upper control arm. The upper ball joint can't handle the angle

[@mr.roboto7330]

Just for 2 inches? I thought that’s only if you’re lifting more than 2

[@MrJohney]

@mr.roboto7330 never mind I have a rebel and it has a 2" factory lift already if I did 2" that would end up being 4". So my comment should apply to me in this scenario

[@davidalonso1584]

​@MrJohney rebel has a 1 inch factory lift . So If you gave it 2inches of lift . Its a total of 3 inches. On a rebelit I'd recommended to change the uca if it's over 3 inches .

[@MrJohney]

@@davidalonso1584 really, I thought it was a 2 inch lift from the factory.

[@WooGnar]

The 2" leveling won't require the UCA to be swapped out. Although it would be recommended down the line to do so.

[@007Knightjp]

While I am happy to see a new video on here, I thought that all new videos will be on the new Amercian Trucks channel.

[@Ricky_R]

Maybe they realized their mistake. I certainly wasn't going to watch a channel that had Ford and Chevy content.

[@AmericanTrucksRam]

Appreciate you guys watching!! -Zach

[@aaronmccubbin633]

That brake line got the strength of 1000 broncos

[@user-vt6ld4lb5p]

Can you put a spacer on top of these?

[@HookedonHD]

Why not include the torque specs when tightening everything down?

[@Bass23]

Do have to change the ones in the back to

[@crunklescrunkles4425]

Which are better, the N3 or the M1's? Just curious

[@richardgonu7600]

Would this add 2 inch to a rebel or 1 with the original facory lift

[@FuriousFuria]

We need an answer for this!!! This will determine if Rebel owners need this or the 3.5" version @americantrucksram

[@MrJohney]

@FuriousFuria what about a spacer plate for the top of the strut

[@FuriousFuria]

@@MrJohney I installed 2.5” strut and it leveled my Rebel

[@MrJohney]

@FuriousFuria very nice 👌 I've been thinking about leveling mine.

[@MrJohney]

@@FuriousFuria I wish this site would include the ecodisel in the videos and showcase the products they carry for them

[@martys4814]

I’m sure it needs an alignment after…plus no torque specs…..

[@AmericanTrucksRam]

We absolutely recommend an alignment after any sort of lift or leveling kit! -Zach

[@stevefarrell1016]

Are the torque specs on the direction sheet for the 2022 Rams?

[@craighogland8509]

anything different on the 22 ecodiesel?

[@MrJohney]

They never do anything specifically for the ecodisel

[@WooGnar]

You can put this on the Ecodiesel 1000%. They don't include it cause of "weight" but the Ecodiesel engine nearly identical in weight to the Hemi.