The First 5 Parts You Must Buy For Your 2019+ RAM 1500 - The Haul

[@AmericanTrucksRam]

What are *your* favorite modifications for your RAM?? Shop Adam's First 5 Buys! BAKFlip FiberMax Tonneau Cover: amtrucks.at/2lKIq7V N-Fab EpYx Nerf Side Step Bars: amtrucks.at/2kpaGMV RoughCountry 2" Leveling Kit: amtrucks.at/2QW9Hln Mickey Thompson Baja ATZ P3 Tires: amtrucks.at/2QlUB6J Black Rhino Barstow 20x9.5" Wheels: amtrucks.at/2tWbz40 Borla Stinger S-Type Exhaust: amtrucks.at/33jXw40

[@favriteshoe]

about how much is it fro all 5 modes?

[@ThatGuy-jz4so]

Almost everything on this list is out of stock. Give me some incentive to wait and purchase from you! I am a dead serious buyer. I need the bed cover step bars leveling kit or some overcoils. Hook me up with the friend or employee prices! I'll buy everything from you.

[@TPFMBH]

My favorite modification: I modified a 2008 Mazda CX9 into a 2020 RAM 1500 Bighorn in Granite Crystal. The mods set me back a little so I'll have to wait a little to lift, exhaust etc... but it was well with the time and money I've put into the project so far.

[@TheQman69]

A note to all those people about to get a front-end leveling kit installed. You need to get your headlights adjusted too when you mess with the front end height and rake/angle of the truck.

[@flynnzero9282]

Nope

[@facepalmdaily4404]

Bigger tread does very little to give you better "grip" on sand. In fact, highway tires, partially deflated, are better on sand than AT tires. I've lived on padre island for 40 years. Trust me on this. Highway tires deflated to 15psi is going to get through soft sand better than anything.

[@Brian424]

I just got a gently used 2022 Ram, bright blue with black rims and factory step bars as my daily driver. My first five mods were more in the budget range. WeatherTech floor liners and mud flaps, AVS Side Window Vent Shades, seat covers, and a soft tonneau cover off Amazon that looks and works great, but I do really like the hard cover you have in the video. Total price for all, about $600.

[@Ettubrut]

Link to cover please 🙏

[@jasonmelby6221]

Spray on bedliner, window tint, tonneau cover and led bulb upgrades were the first 4 upgrades I added to my new truck.

[@zacharyvanoostenrijk93]

Did you need to add certain components when you changed to LED lights, or were you able to just switch the bulbs?

[@jasonmelby6221]

@@zacharyvanoostenrijk93 the brand I bought is called sealight. All I had to do was swap it the lightbulb. It had a pack in-line pack which I assume is a resistor that keeps it from popping up an error message that the bulb is burned out

[@zacharyvanoostenrijk93]

Alright. I will check it out. Have you had any alerts or codes pop up since you changed them? Also, did you change all your lights?

[@jasonmelby6221]

@@zacharyvanoostenrijk93 I started with the headlights as they are the most impactful. I tried swapping out the reverse lights but got an error code so went back to halogen for those. I will eventually buy full led taillight assemblies but for now I’m happy with the enhanced headlights

[@GaryCoolCoolCutterWilson]

Great series of Ram's videos. I love my 2019 Ram.

[@opinionshurt2905]

I have Falken Wildpeak A/T 4’s on my factory rims, 285/55/R22. They are 34.7” and fit perfectly with a 2” levelling kit.

[@glockfanboy933]

Thank you I was debating on the falkens!!

[@mfsmfs63]

The 285/55/20 is virtually the same size as the stock Night Edition tire, which is 285/45/22. They're not 33" tires, but 32.1" for stock Night Edition and 32.3" for your mod. You DON"T need any after market lift for these size tires.

[@jwolveee]

Great video to see your top 5 mods for a new Ram 1500 truck! But I would LOVE to have a link in the description to all the various pieces so I can easily go buy them for my ride! 😎👍

[@AmericanTrucksRam]

Got those guys added for you! Our bad, we usually have a nice little list posted. Thanks for keeping us in line and thanks for watching! 😉 -Zach

[@4ehardy]

Love the quality and information in your video. I just purchased a 2019 Ram and want to upgrade the sound and now I think I know which exhaust to go with 💯

[@AmericanTrucksRam]

Thanks for watching! -Zach

[@jasonargo8607]

I bought a brush guard and the super coils for my 2019 ram 1500. Next mod will be the 2 inch leveling kit

[@lauriedavis7471]

Woo hoo, I got the levelling kit and the 33” tires, but with Mickey Thompson rims. I also have the step bar and tonneau cover. I like the suggestion of that muffler thingy for my Ram. Guys have been asking if I have been borrowing my bf’s truck 😂 thanks!

[@AmericanTrucksRam]

Thanks for watching, Laurie! -Zach

[@jim62367]

I got the N-Fab polished stainless steel nerf/step bar on my 2016 1500. It also has the 3rd step for the bed. Looks great on my Ram since the bumpers, wheel, and most of the trim is crome instead of black.

[@deanboucher9658]

Pretty close to what I did. 2.5 leveling spacers (Amazon $65)giving me a no rub on 34x11.5 open country at3's on factory wheels. Flowmaster outlaw direct replacement muffler, exceed bed cover by extang, and ironcross steps. The finish is coming off the steps, very disappointed. Planning to remove all the finish this spring and have them coated with linex.

[@dansloan4242]

Just bought my first mod from you guys!!! Went with the flowmaster for my 04 ram!!! Woohoo! Should be here in two days

[@AmericanTrucksRam]

Very nice, Dan! Flowmaster makes some great stuff so I'm sure you'll love it! Thanks for watching! -Zach

[@dansloan4242]

@@AmericanTrucksRam update!!! Just cancelled my order with American truck, everybody!!! customer service was rude, got the run-around, tired of being lied to, so cancel my order! Will not order from these people ever again!

[@ryanhemming9546]

@@dansloan4242 I highly recommend a superchips tuner for your Ram. I have an '06 with a Hemi and it really woke it up.

[@kikobaloney7374]

Don’t need side steps. Wife and I are both over 6ft. But this vid was GREAT

[@wadeslayback9338]

😂 meanwhile i am over here looking like an oompa loompa hanging from my side step trying to crawl up.

[@Brian424]

@@wadeslayback9338 And probably scratching the paint on your door sill in the process. I have factory step bars and don't use them because I don't want to get em dirty and scratch em up, but my own ooompa loompa uses them to full capacity on the passenger side, and I follow behind with a wet paper towel when she's not looking.

[@BC-qm1mb]

Wow! It's John Snow from Game of Thrones! Great video too. 👍

[@Brian424]

You know nothing, Jon Snow! Aaaaand theyrebothdead. Gotta love GOT.

[@knowhereman1]

My third add-on was the retractable bed step. Well worth it.

[@AmericanTrucksRam]

They're definitely a great option to add to your truck! Super convenient. -Zach

[@fredredbeans2985]

305 55 20 on 23 big horn - stock suspension and wheels, no leveling kit, no rubbing

[@Troche571]

For the price point of the BAK, I'll have to spend a little more to get the 💎 BackHD cover. If you go with their SE option it's still better than BAK. Made in the USA you have a weight compacity of 400 lbs, and 1600 for the HD. The leveling KIT, well as a Ram owner I have go with AEVs 4inch lift, or you can go OEM with Mopar's 2 inch lift. If you need to save a little more cash go with Rancho's adjustable 2 inch struts for about 240 bucks. You get what you pay for. So if you're rig is for the Streets you could get away with the RC $50 dollar option. The side steps, I like these, but I'll have to go with ADD as my first choice.

[@shadowballen6463]

BAK mentioned here is about 800 dollars, top of the line BAK ( not the one mentioned here) is about DB SE level-ish. ... diamondback HD is $2000 ,.... SE - $1400 and DB 180 is $1900.... so your spending at a minimum 50% to double this bak cover cost..... not sure how you define a little more... agree with leveling kit, rather go lift as well. Side steps no real favorite I'm 6'6" so doesnt matter. But went Barricade HD for the little woman to get in, and the sit tight to truck and are tough as hell.

[@Troche571]

Hey in the end they are both made in the USA, so in my book they are both great options. For me I was hooked on HD when I saw the ATV load options and now their RTT rack crossbars.

[@Troche571]

AEV by the way has a smoking sell, 1k off their duel sport 4 inch lift, and their Mesa wheels are a 100 bucks off.

[@bnut1979]

hellwig swaybar!

[@zacharyvanoostenrijk93]

The only reason I prefer the roll up tonneau cover is because it doesn't cover my back window, otherwise, I really like the tonneau cover you are advertising

[@AmericanTrucksRam]

Fair point! Thanks for watching! -Zach

[@jg1503]

Don't need the last mod. The exhaust manifold will go out and its plenty of noise lol.

[@christac2588]

I put a 2” level kit on my truck. Looked great but towed like crap. Took it off. Only for looks.

[@gregory9740]

Screw the leveling spacers, do it right with some adjustable bilstein shocks.

[@tnrodgers]

I added step bars, new LED headlights, WeatherTech floor mats, and an SB Airbox. I will add a bed cover later. But the leveling kit?? Nope, I’ll take the rake!

[@Gucci_Membrane]

I got 35s on my 2019 1500 with just Bilstein 5100 leveling struts with no rub

[@XxsteamerxX]

I did the Hard Tonneau and some Nef rails. I also got a Bedrug floor liner. I love mine. Some people have asked me if I sleep back there because it makes everything so comfortable back there. I can easily clean it with a power washer. Can't wait to get my exhaust and wheels/tires.

[@kennedydewitt3219]

Don't forget to add a K&N cold air intake

[@donearl6675]

the first thing i did when i first got my 2019 ram was the side steps👍👍

[@Brian424]

My recently purchased 2022 has factory step bars, but I don't use them because I don't want to get em dirty. Lol. In the winter when everything is constantly dirty that will probably change.

[@juliemulcahy2067]

Great list

[@wr1039]

What’s the total height of the truck with the 33s and leveling kit? Would it fit in a 6’9” garage?

[@pault4313]

how about for an ecodiesel?

[@Harvdawg1981]

Can you do a first 5 mods for someone with a limited since that has the air ride suspension standard

[@ramrider1453]

I subscribed. Look forward to future videos. Well done

[@AmericanTrucksRam]

Thanks for subscribing! We appreciate it! -Zach

[@mweezy]

A Hemi with a muffler delete sounds a lot better

[@robnowe5464]

The sound test should include a decibel test.

[@benmarshall6180]

One thing to remember, hard cover tonneau covers are really nice for protection reasons but The dealer I got my ram from said he’s had multiple issues with water going in between the cover and then the ice freezes and buckles the panels. (They are made of sheet metal on top styrofoam middle and sheet metal bottom) he said he’s had 3 returns this winter alone.

[@techytech1]

Ive always used a 1 piece fiberglass cover.. water goes nowhere but right off the truck, and its not easily broken into. It has no moving parts but itself

[@GoogleIsRuiningEverything]

Any suggestions for a 22 rebel ecodiesel?

[@tipat455]

I want to powder coat chrome on my ram, good idea or it will no age well?

[@gleem1751]

We want Meredith. Beat it Adam

[@conwayleaf9021]

Wouldve liked to see the stance of for the -12 offset on the black rhinos🤔

[@AmericanTrucksRam]

Subscribe and stay tuned! We'll be putting out a video sooner or later that will help you visualize that. 😉 -Zach

[@mytexaslife3584]

I've heard getting spacers for the 2" front level is bad for the ball joints and that after a few thousand miles they wear down. Would it be best to just buy more heavy duty upper control arms along with the 2" spacers?

[@AmericanTrucksRam]

If you have room in your budget aftermarket upper control arms would be a great addition! -Zach

[@jbezzyb]

Do you make a kit to lower the back end 2"

[@JesusMartinez-wm4dk]

Tint cover headlights ram rebel 2019

[@jrtagg1]

I'd take a borla atak

[@justinprichard6483]

I just bought a new 2022 big horn and I want to put a leveling kit are those cheap pucks going to serve me right or do I need to spend the $500 and get a full blown kit

[@jaredwertenberger1720]

This leveling kit will eventually blow out your struts.

[@justinprichard6483]

@@jaredwertenberger1720 I found that the 2022 came with a nice adapter plate for spacers that does not let the rubber boot move or press up into the spacer. Which is the same as running the top of the strut tower to the factory mounts. Go ram. That bieng said I went with only a 2” front spacer kit that way I’m not having to mess with my geometry to much to where it’s throwing everything out of wack. Professional alignment and she’s been sitting pretty ever since!

[@justinprichard6483]

@@jaredwertenberger1720 there’s a video on KZbin here showing what causes the strut failure and the new adaptation from ram factory eliminates that.

[@shotgunnar2586]

Muffler shop cut out my muffler and welded in a straight pipe for $100. Left the resonators in place and couldn’t be happier saving $1100

[@KarlH1980]

That sounds like it would be awfully loud. (No pun intended) How does the volume and quality compare to this video?

[@samuelmoss6649]

Can the hard cover be used with the ram box

[@ericsvalland4417]

The black rims and side steps don't go at all with the chrome bumpers, grill, and badges. Stay with the chrome rims (as seen on the passenger side), and go chrome steps, or continue with the black(out) look and change out the bumpers, grill and badges to all black too.

[@Brian424]

I disagree, but I see where you're coming from. There's enough black accent on the chrome bumper, with the fog light frames and the lower plastic/rubber "sweeper" on there, that I didn't even notice the contrast until you mentioned it. If a guy has a lot of money to toss around, I'd say yeah, change to an all black setup and it would look mean as hell, but as it was in the video, that truck looks plenty good to me. This is one of those thing where if you ask a hundred people, you'll get a hundred different opinions. Just my two cents.

[@disarmyou84]

Is the truck gonna ride like shit with that leveling kit? And what about long term tire wear? The leveling kit alters the factory specs in the front end.

[@jazamora7521]

Alignment?

[@imfloridano5448]

Prices, i didnt hear bout prices

[@patamaran]

without fender flares, the first dirt road you hit will dent the living hell out of those folded, unprotected metal edges in the wheel wells. 2 years later, it rusts, and looks like a bag of crap. 3m vinyl tape the interior folds of your wheel wells, or get some flares to cover the metal.

[@Brian424]

What is this 3M tape you speak of? I have the same metal edges in my wheel wells. I'd like to explore some options. Won't fender flares trap salt and cause just as much rust as rock chips would? Just trying to learn something here.

[@MayorMcCheezin]

Will a leveling kit void my warrantee?

[@rileymay3556]

no

[@zachploen4067]

AMP Power Steps are a better option than fixed nerf bars. You won’t lose 12” of clearance.

[@netsurfers9357]

I like the electric action foot step better, but it is much more expensive.

[@titanusgodzillaa4274]

but its sleeker and better imo

[@pat4145]

ram boxes cover !!!!!!!!

[@Fixin-To]

1. Pulsar

[@mcmurse2974]

I feel like leveling kits with spacers would throw off the suspension a little? Make it ride a little more rough in the front. Opinion on a little bit higher quality leveling kit/small lift to ensure a good smooth ride?

[@Wanderlust073]

Late reply, but I had the mopar leveling kit put in my 2019 laramie. No difference in ride quality whatsoever.

[@joecaldwell3080]

if you get it with 4 corner air suspension you won't need a leveling kit...js

[@wadeslayback9338]

Not true. Even with the 4 corner air suspension you still have about 2 inches of rake. However i am pretty sure a leveling kit will mess with the air suspension. I have yet to see anyone put a leveling kit on one.

[@tratzum]

$1000 for tires, over $1000 for wheels, $1000 exhaust, around $900 for cover. Looks nice but Ill pass.

[@er5490]

Yup. Covers are ridiculously overpriced although they do look nice.

[@jazamora7521]

It's the price to pay of you want to play, I bought an Ecodiesel so exhaust won't do much for it. I'll pass on the cover as well but a small lift or leveling kit asking with wheels and tires for sure are in the near future.

[@RockStar5656]

jazamora7521 exactly! I got the Limited with air suspension so I don’t need the steps or leveling kit, but I might do the cover and wheels/tires.

[@er5490]

@@RockStar5656 I got a low profile roll up cover for $120 on Ebay. Doesn't provide the same security as a hard cover but it does look nice and its convenient. Beats $800. I'm not living in the hood so soft cover works

[@XxsteamerxX]

@@er5490 Got a 4 section hard cover off eBay for around $375. Does the same thing except I can't raise it all the way to the window. Not been a problem so far.

[@ericnegron8331]

Nice lookin dad truck

[@michaelcollins1398]

How’s the drone noise in the cab, with the bora exhaust.

[@matthewm3912]

I’m getting a 2022 back country edition delivered in 4 weeks, I think I’ll be content with how it is for a daily. Only thing is it has halogen headlights 🤮

[@AmericanTrucksRam]

We have plenty of options for you to change that! 😉 Thanks for watching, Matthew! Enjoy the new truck! -Zach

[@fonzil5909]

What wheels are those?

[@AmericanTrucksRam]

Black Rhino Barstow 20x9.5 wheels! Check them out at the following link! -Zach amtrucks.at/2tWbz40

[@JesusMartinez-wm4dk]

Smoked headlights ram rebel 2919

[@Tinman964]

question with your leveling kit . I have noticed that some put the UCA's at a bad angle . is this an issue with yours ?

[@martys4814]

Not the first mods to buy....

[@MyBajanboy]

Hi I'm Mark from Vancouver, BC Canada. I Just purchased a 2019 Ram 1500 Classic 5.7L.Where can I order the Borla Stinger S-Type Exhaust System w/Black Chrome tips as shown in your video?

[@AmericanTrucksRam]

Hey, Mark! Thanks for watching! This exhaust system is currently out of stock, but you should be able to order it right from our website at the following link! Check it out! -Zach www.americantrucks.com/borla-ram-stinger-s-type-single-exhaust-system-with-black-chrome-tips-rear-exit-140752bc.html

[@JustyouraverageJoeDIY]

Will that bed cover and side step bars work on the 2019 classic 1500 as well?

[@phoenixblack1220]

No, Joe. You will need to order parts for the 2018 model to for your RAM classic.

[@JustyouraverageJoeDIY]

Thank you!

[@AmericanTrucksRam]

Hey, Joe! When looking for parts, you'll want to enter vehicle info as if you're shopping for a 2018 model RAM. The 2019 classics are nearly identical to the prior year's model. Happy shopping and thanks for watching! -Zach

[@Maxpower88888]

Jesus get a box liner

[@richmtnrecon9120]

I call b.s. my 2018 Ram 1500 Express Quad cab came stock with 33's on them and they don't rub at all!

[@wadeslayback9338]

Yeah i thought bs too. My 2020 Rebel came factory with 33.4 wrangler duratrac tires. It has the 4 corner air suspension but even those without it came with the same tires.

[@benmora7437]

How short is this guy

[@heartofdixie67]

ARE YOU SUGGESTING THAT AMERICAN TRUCKS INSTALL A FEW SPACERS IN HIS SHOES OR A LIFT KIT ??? LOL !

[@ryanhemming9546]

He's a former horse hockey. True story. 🤣

[@johnpijus5194]

Yes you talking a lot of money here

[@rexreynolds3346]

For anyone wondering, the total for all of these mods will cost you around $6,000. not including cost of labor if you have to pay someone to install them.

[@mytexaslife3584]

I'm sure that Borla exhaust system almost makes up half that 6k haha

[@Brian424]

Yes, yes, I was wondering that. Thanks for the info, and for letting me know I can dream about it, but can't afford it. 🙂

[@johnduvall3432]

Shit, I run 35’s with no rubbing

[@wisconsinrebelhomes7587]

4th generation dodge ram is the best

[@bonnaiii]

wheels are too big small wheels on fat tires

[@Insuranceexamprep]

Don’t need any of this stuff the Ram is perfect from the factory

[@ZmannR2]

“Most truck owners buy a tonneau cover”. I guess most people that don’t use their bed

[@jazamora7521]

Might as well get a pos Prius 🤣

[@danielgahl8753]

They are pretty handy come ice fishing season.

[@buffalobill9958]

Depends on the cover. I've put ATVs in the back of a truck with a roll up cover. You don't lose any use in the bed

[@jeffway1467]

This is a dumb comment, you can still use your bed with most tonneau covers.

[@Brian424]

@@jeffway1467 Yep. With a roll up especially, you can use the whole bed easily. Haul a refrigerator standing up against the cab with the cover rolled up is no problem. I've never had a hard cover so don't know if that would work as well.

[@joshgaut29]

The worst 5 things to buy for your ram first. What an awful video

[@joshuayork4693]

Cool sponsored add 👎

[@mehdiamirinikou603]

If you have a 6.4 bed don't buy this flush mount cover it's absolutely garbage it comes with 4 panels that folds and has only 3 lock on panels which you lift the second panel from back easily you can open it up if you have tools this is not safe at all and the other problem is its not water proof this is absolutely waste of money do not buy this garbage cover from mopar

[@corylee2261]

Bakflips suck!

[@jeffbennett8093]

Black wheels SUCK!!

[@novastiqueify]

I'm thinkin that trend is about played out myself.

[@Brian424]

Just got me a 2022 with black wheels and I have to beat the women back with a stick. They all want a ride. Or maybe I dreamed that . But I like the black wheels. To each his own,

[@JesusMartinez-wm4dk]

Tint cover headlights ram rebel 2019