Analysis of Vibration Reduction Plate(Enable subtitles)

We are now happy to announce the release of our new VRP, we have had many positive reviews of late from people enjoying smooth riding on there UCE`s, however like any engine component they have to be fitted carefully with the correct procedure.Therewere just a few cases where people were not following instructions therefor hindering the functioning of the VRP; so we have now made it easier through our new design for easy fitting; whereas the dowels cannot be refitted; and the bearing has full support making it hard for someone to knock the bearing out of position.
There is one very important step to follow and that is to make sure the bearing inner is firmly pushed in on the taper at the exact moment of tightening the plate bolts; so as the bearing locates the plate not the other way around; as to avoid preload.
Proof of effectiveness:-There are many telling of their experience of the effectiveness of our plates; but like all new products there always the sceptics, the critics and off course the trolls, one guy even sat a phone with an app in an idling bike and made all sorts of claims, he didn’t even ride the bike and wouldn’t believe his customer that said while riding the bike that it gave good results and sadly some believe without factual evidence.
Please check out our video of a bike been Universal vibration Apparatus at a local college with and without our VRP you can easily see the reading drops from 40 to 15.
There are the occasional few that claim no improvement, either their bike is exceptionally well balanced to begin with or has a larger problem causing so much vibration that any benefit our VRP give is hidden, but these cases are rare and even then the plate is assisting in supporting the crank giving longevity.

[@vikasyadav-zo8od]

That plate really works i have installed it in my 500cc classic and it works well with my bike .Nice work by Mr. Paul carberry really appreciate your work .

[@ramavarte279]

How do you get the vibration plate.... from which market

[@richardrichard5409]

Torque wrenches were hurt in the making of this video. Great video, very useful. Oddly, every UCE I've ridden vibrates way more than my Cast Iron Sixty 5

[@harvinderbhatia1138]

I was expecting this from carberry :) very soon they will come with accurate vibration meter testing and accurate data. Now this is done right n technical... Keep it up.

[@Hoodeene]

Hi, i am from Austria and this product has been just installed on my bike. It works great and reduced the Vibrations significantly!! Thanks and all the Best!

[@sudiip]

Awesome is the result I installed it in my classic 350 and believe me it's not vibrations going down but it vanished .I give a big salute to Paul ,if I had not installed this plate I was ready to sell my bull,but now I love the smoothness of the ride of my bull,Paul carberry keep going ,riders need u like desert need the rain...

[@adityasinghchouhan4466]

Sir can you please organise a official camp for this where we can fit carberry plate from your trained machanics because many machanics don't know how to fix it correctly

[@JagadeeshPolepalli]

I am waiting for the end of warranty for my classic 350 GMG. Will get this one after end of warranty.. Nice work...

[@ShantanuSharma]

Just received my plate. Can't wait to get it installed.

[@aravindbnr]

The big challenge here is getting qualified/knowledgeable mechanics for fitting this correctly .If there are stores who sell and offer accurate fitting , or workshops and camps this would be a success.

[@nandakishore4796]

Yes u r right most of the mechanic act very smart

[@bultacowally]

Got to be honest here if you can't put one of these on then you have no business owning a motorcycle. It's THAT easy...

[@hectorvelandia3782]

Hi guys, I'm very impressed with the product that you developed to reduce the vibration on Royal Enfield engines. I'll like to get more information to offer this product on my new motorcycle shop that I'll open very soon in Bogota Colombia. At this time I'm on the process to sale my property in Tucson Arizona. and move to Colombia very soon to establish my new motorcyce shop business. Thanks for all the information that I can get and the time you give me. Att. Hector Velandia.

[@36headbanger]

I have installed this plate but uninstalled it a after one week as all the vibrations have gone. I do really like my vibrator

[@vishalkhandelwal6414]

Awesome is the word for Paul carberry he is awesome he is perfect he is awesome .my bulls vibration got down by 80 percent after this plate installtion

[@tomstockell9481]

Good on ya Paul ! fitting it soon to my Classic 500

[@bigred8438]

Good on you Paul. As a Wandin North bloke, I am hoping there is plenty of scope for your talents to be used over there.

[@michaelpearshouse1100]

Why doesn't RE fit this mod (probably under license) to all factory bikes?

[@bultacowally]

I bought one of these for my Trials 500 Replica. Guess I was expecting a bit more results than I got.

[@RomanBuchok]

Does this plate fit the Continental 535GT?

[@carlosmiranda5561]

Good vídeo Greeting from Colombia Sud América!

[@Saravanakumaran_sp]

Good job !!

[@brandoncostner7437]

What's the tool used at 2:16 to hammer in the bearing

[@akashjayadev3923]

There is a slight difference in my bike but it's only when it's on the move ..i don't think there is any difference when the bike is on stand still..syill feel that the price is too high for what it is

[@AndreLuiz-ip3fh]

Maybe adapting one ballbearing on the original plate, it could work

[@frankiepitt9135]

@@AndreLuiz-ip3fh yes do it, let us know how you get on.

[@keysersoze8969]

Sir, Is there any lathe work involved in this installation process?

[@Jairam500]

No

[@sarathsureshbabu1785]

Can you build hero extreme 200r twin engine.

[@adityasinghchouhan4466]

Mainly for thunderbird 350 x

[@arvindsrivatsav5916]

i have the same bike , is this thing good for TBX?

[@basheerahamed7248]

👍

[@sivaprasad4578]

Any one from Bangalore..... please let me know where can i fix it properly

[@hariprasad-cq5jj]

Check ur hands vibration☺️

[@TheWorldRealist]

Cannot hear what he is saying most of the time, plus background noise. Obviously need a new gasket too.

[@ranjithjyothikrishnan3502]

At first he put the probe on the engine and its showed reading of 40.... After the installation of vibration reduction plate he put the probe on the handle bar the it shows reading as 14.... This clearily shows that this thing does not work properly....

[@eriksnel6461]

and it in the next shot putting the probe on the engine and it shows 14, on the handlebars 7. so it does seem to work

[@erythm8]

Does it go with Machismo 500?

[@petergosling4381]

pity the sound is not very clear

[@charlietuned]

I am getting very worried!! I sent through a payment on 16/8/2019 through Pay Pal , have received confirmation of payment from Paypal ,have tried phoning and emailing you but have had no success!! Are you still in business??

[@charlietuned]

still waiting!!!!!!

[@arielgb5991]

@@charlietuned Hiya look what i have just found.:- accessories.hitchcocksmotorcycles.com/accessory-shop/crankcase/43602

[@jhaskoll]

Mechanical engineering good : Sound engineering appalling...

[@jithinjr2168]

👍