The BEST Drawer Slide Method! Ana White's Secret Trick!

Over the last 10 years of installing hundreds of drawer slides, I’ve come up with a unique method that makes installing full extension drawer slides easy. No math, no figuring, and no adjusting, so much easier and faster than any other way of installing full extension drawer slides.
Diagrams and More Tips: ana-white.com/blog/2020/02/ho...

[@dzymslizzy3641]

My late hubby's step-dad was a master craftsman who built amazing furniture. One trick he always used was to set the drawer slides just a hair off level, sloping toward the back of the furniture piece (using the vertical adjustment slot on the slide). The off-level was slight enough that the drawer never bound, and the front lined up just fine, but it was enough to make the drawer self-closing. You'd just give it a tiny, gentle push, and it would glide all the way closed by itself. Brilliant!

[@williamporter9604]

Nice job, you could use double side tape if you don't want to nail the draw face on. Professional cabinet installer

[@juniorlewis9173]

Thanks for sharing that tip/trade secret.

[@chrisford9045]

@@williamporter9604 you can also put screws, from the inside of the drawer, through the front panel, with just the tip protruding to the outside. Then put the draw face in position and give it a tap to transfer the screw position onto the backside. Now you know where to drill it

[@global-village]

I call them artist in their profession.

[@jollyroger7624]

The house would need to be on a slope to make these self closing !

[@BluePatriotWoman]

Your video is one of the best of this genre I've ever come across. You don't muck it up with a bunch of intro and music and useless information. You demonstrate and explain as you go. Most of all you're calm and confident and that makes a viewer feel like they could do the same. Thank you.

[@AnaWhiteDIY]

Glad you enjoy it!

[@elizabethbeers9274]

I'm a newbie woodworker, and I built 27 drawers for my new shop using your method. Every single one worked, perfectly, the first time. What a live saver!

[@AnaWhiteDIY]

Great to hear!

[@SteveRamsey]

This is a fantastic method. I never thought about installing the drawer members first, then building the drawer. Thanks!

[@soroako4142]

Most of my carpentry efforts start with me measuring twice and then cutting short! A couple of months ago I built my very first pair of drawers - similar size to the one Ana built for this video. I fitted the slides onto cut off pieces of the same material I used for the drawers so that I could determine the width - just as Ana demonstrated. The first drawer fitted damn near perfectly - it opens and closes easily. I was feeling pretty pleased with myself. The second drawer was / is a disaster. Way out of alignment. I doubled checked the dimensions, relative height and levels of the sliders etc. all to no avail. Removed and refitted the sliders and whilst not as bad as previous it still won't close properly. Double checked all the measurements again, fitted the sliders a bit higher so that I could make sure I was screwing them in level. Still no good. Slamming the drawer and cursing didn't help either. Ana has inspired me to have another go. I'll start from scratch - new timber & new sliders. This time I'll follow Ana's tip of using the screw holes to mark a line for the sliders.

[@adoxartist1258]

@@soroako4142 😂 "Slamming the drawer and cursing didn't help either." Story of my life! 🤣

[@bkelevate]

Steve Ramsey - Woodworking for Mere Mortals this is the greatest KZbin crossover ever! Two of my favorite woodworker teachers on KZbin.

[@paulgoard8776]

@@soroako4142 Ana and Steve have saved me hours of work.

[@avrumisolaimani8546]

yep steve ramsay sent me here 2

[@butterflyxf]

After watching the video advert i was still skeptical. But when i finally downloaded the plans kzbin.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!

[@talkswithravens982]

When putting the front piece on the drawer, you can figure out and mark where you want the handles. Put the front piece on your bench and drill the holes for the handles through the front piece. Then just put some temporary screws into those holes to mount the front piece onto the drawer body. Then install screws from the back like you did, then take the temp screws on the front side out and mount the handles in the drilled holes. No nails and no filler needed.

[@gregpaton5977]

This is my method, works every time. i was going to post the same comment until i found yours

[@davidcurtis5398]

that is the way I do the fronts. But this works only with the drawer pulls that need through holes. If the drawer pull is screw mounted, then this will not work...

[@JezVibert]

If you leave the base off you can fix the front by getting into the drawer box from underneath. Then put the base on afterward

[@John-dp8oh]

Use double sided tape.

[@tracybrislin]

You just changed This old mans life! Perfect how to, so well explained, such calm back ground music, your the best! My family thinks I am a genius carpenter thanks to you!

[@AnaWhiteDIY]

Happy to help!

[@patrickarchuleta9594]

I save the majority of her video's so I don't forget how. Lol

[@ericbulington2421]

You are a genius. You learn from others and aren’t too proud to admit you can learn more! Awesome. You deserve some credit!

[@kevinwassellsr.5646]

I've been an amateur cabinet maker for 40 years. I've watched thousands of hours of This Old House and New Yankee workshop. You scooped them both. THIS LAYOUT METHOD IS BRILLIANT!!!

[@AnaWhiteDIY]

Thanks for the visit, I appreciate that!

[@heatherdyer1979]

I've watched other videos on doing this but they all made me say "what?" Lol this video makes so much sense and makes it look like 100x easier. Thanks for sharing.

[@surfingforinfo9881]

I like how your just so straight forward, simplistic and pleasant, not excessive or try to be entertaining like so many of these vids. I love learning from other peoples mistakes and learning from their light bulb moments. This is so much less intimidating to tackle!! ty

[@ardwych4881]

Surfing.., 'simplistic' is invariably used in the negative sense. 'Simple' will do. ;)

[@marencruickshank]

Indeed! I subscribed for the straightforwardness and authenticity

[@anitaking6261]

I’ve been waiting to buy tools so I can try making this exact drawer and yesterday my husband and I made a drawer by following Ana’s instructions! It was easy but took us some time because we had to put a table saw together and buy some wood. We also watched Ana’s video on how to use the Ryobi nail gun which was sooo helpful . Ryobi should be very grateful for Ana’s work because she is why I bought the nail gun and also made the drawer. Cant wait to make more!

[@AnaWhiteDIY]

That's fantastic, way to go!

[@robf327]

I was about to give up trying to repair a broken drawer in our bathroom.After 6 videos that were overkill. I found yours Thank You for sharing and making it easy to follow. I’m 72 years old and still learning from you guys. I added new drawer slides and built a new drawer and it works perfectly. Thank You both Robert

[@AnaWhiteDIY]

Fabulous Robert, so happy to help!

[@deelirious]

I love how you think outside the box, beyond how it is supposed to be done and I thank you for sharing it with us. You are truly a role model.🥰

[@retiredarchitect3462]

very neatly done! Perfectly square, clean and smooth - all without clamps, drop cloths and right in the kitchen!

[@99trampis]

I love this! As a novice woodworker I have always struggled with drawers and mounting slides. This is a no nonsense (and frankly common sense) way of doing it! Thank you for posting!

[@AnaWhiteDIY]

Glad it was helpful!

[@PatrickHoltzman]

I think I’ll try this! Makes sense to me to build them after putting in the slides. I already built 9 boxes ahead of time today so keep your fingers crossed for me lol I still have 23 more drawers to do so plenty of room to experiment with different techniques. Great video thanks for sharing!

[@ronthompson4522]

I have also been installing drawer slide and never thought about this method and I WILL be doing it this way from now on!! Thanks Anna!!

[@KMC597]

This looks like it would work for hidden drawers, underneath cabinet - behind the kick plate- you make it look so easy!

[@neilvorano8032]

I really enjoy your videos, thank you. I appreciate that there's none of the flash or intros or anything, it just gets right to the point of good woodworking. I have really learned a lot.

[@AnaWhiteDIY]

Glad you like them!

[@karenhealey9818]

Oh my gosh! I've been following you for years but this is the first time I've seen this video. Thank you so very much! I've been putting off building a kitchen cabinet because I could never figure out how to make the drawer slides fit perfectly, no matter who I asked for help. You are amazing and I appreciate you sharing your knowledge!

[@AnaWhiteDIY]

Glad I could help, thanks Karen!

[@akashtriz]

Thanks a ton Anna, I can't stress enough how important it is to take the smaller of the two measurements between front side and back side. Now I know where I goofed up the last drawer!

[@peggyhiggins6923]

Ana, you make it look so easy! I also wanted to tell you that my youngest son built me the exact rustic coffee table I've wanted for about a year. He found the plans on your website and gave it to me for Christmas! He is a police officer with no woodworking experience but started following you (mom's suggestion) as a stress buster from work. Thank you so much💕

[@diycardboardcreation5411]

I am always doing a lot of DIY at home and as such use KZbin a a lot. I've watched lots of videos on this subject to help me with my project. This is the most informative and to the point. It's always a good feeling when you find a video that doesn't waffle pointlessly and gives you the content that you need. Thank you and Well done.

[@AnaWhiteDIY]

Glad it was helpful!

[@user-iv8xk1vn9e]

Anna, you are my hero. I’m not overstating how your videos have been helpful and encouraging to me. I’m doing DIYs that I wouldn’t have thought was possible for me to do before. Thank you.

[@AnaWhiteDIY]

I'm so glad!

[@emilolguin3087]

Instead of driving a small pin nail into the face of the drawer head, try using 3m double stick tape. Same idea, except sandwich the tape between the drawer head and the drawer. It definitely holds the drawer head long enough to drill from behind and will compress when you tighten the screw from within the drawer. I use two 1" to 1-1/2" pieces of tape, one on either end at approx. where I'll drive the screw. The screws on the drawer pulls will further compress the tape.

[@bobheiss]

I was thinking of the double sided tape as well, plus it gives you the option of repositioning if you don’t get it bang on the first time. Speaking from experience. 🙂

[@briancurtis5893]

Hot glue would work too.

[@LRobaldo]

I was yelling at her through the screen "Don't nail through the face! Just use a couple of pieces of double sided tape to hold the face where you want it then screw it from the back" I do that all the time when I attach drawer faces.

[@necrojoe]

I've still had problems with the tape having just a little too much thickness. I prefer to just hold the drawer front in position with shims or playing cars, and then just go ahead and drill the holes for the drawer pulls. Use a couple screws to hold the front in place while you open the drawer, add the actual screws inside, then remove the first screws and use those holes for the pulls.

[@jakeqwaninne8502]

i do auto body , so we have an abundance of locating tape (double sided) , and i use it on everything , and it's just the rite thickness for stuff like this

[@shopart1488]

In our cabinet shop we rabbit the drawer bottom in without glue. Also we use a quick and easy way to install the drawer front by using double face tape to hold it while screwing it in place. You always make great videos with neat ideas, keep up the great work!!

[@AnaWhiteDIY]

Thank you:)

[@loritripe4692]

Your drawer slide installation video made installing 8 sets of drawer slides in my dresser so much easier! It truly works great! Thank you Ana!

[@AnaWhiteDIY]

Glad it helped!

[@faridemanrique]

OMG! I’ve been struggling with drawers since I started my woodworking adventure. My husband and I do a lot of projects for our home and those moments when is the drawer time are the toughest. Right know my younger daughter and I are making sliders for our kitchen cabinets. We’re going to make some adjustments to the wood cuts we have and do it your way. You make it look so simple! I know it isn’t but we’re going to figure it out. Thanks so much,you’re so awesome and generous. And having Steve Ramsey comments is crazy! 👍🏼❤️. Blessings from México 🇲🇽 💕

[@AnaWhiteDIY]

So happy to help, you got this!

[@blackstonecap]

Thank you for this great video that removes my confusion on installing drawer slides. And the drawer building method simplifies that process too.

[@olk3]

Great video. Wish I’d seen it before I installed over two dozen of these exact drawer slides last year, in a kitchen and 2-bathroom cabinet refurb. I ordered ready-made dovetailed drawer boxes online. Saved me time and effort vs building from scratch, though wasn’t cheap. It’s an option for the less industrious.

[@WraythOsu]

Great Video, thank you. When squaring the box with the bottom, after doing one end of corners like you did, I then square up the other two corners. After that I make sure the long sides are not bowed in the middle by nailing the middles, and then you can hit the rest of the nails around the frame. Learned this trick making shelves with cheap 2x4s.

[@knixiespell717]

That is so brilliant, Ana! Yay..! Finally found a video tutorial that I can relate to. As a newbie and during this pandemic I have ordered a lot of DIY stuff. The idea of installing these slides seems the hardest part of assembling the drawer parts. You just practically walk me through on how to do it with much confidence, less effort and great finished product. Thank you!

[@AnaWhiteDIY]

Wonderful!

[@ann6030]

Love how easy you make this look!! I’ve needed this in my cabinets for yrs!!!

[@mv80401]

I also got induction and it really only needs 3.5" from the top, so I installed a slim drawer underneath which comes in very handy. Another win for induction: free space!

[@oldtimefarmboy617]

If you put dividers in the drawer they can also double as bracing for the drawer bottom by attaching the bottom to the dividers.

[@sarahpawlak1859]

You're an absolute icon in diy. Brilliant work, tips, and ideas, and even better delivery. Thanks for choosing and being up for this line of work.

[@AnaWhiteDIY]

Thanks so much!

[@janebutz5375]

You have outdone yourself, my dear! Great video! Answered all the questions I had that were not answered by others. NOW I feel like I can do this without a ton of frustration. Many thanks.

[@StoneMountain66]

Brilliant! You're teaching applied engineering statics; 1:50 minutes in "I like to mount the drawer slide about where the handle is so you're pulling right where it slides." My trepidation with drawers and their slides is over. I am looking forward to watching your other videos. Thank you.

[@AnaWhiteDIY]

Thanks for watching!

[@robertgraul9467]

This method of fitting the drawer after the slides are in made the job so much easier...and less stressful! Thank you so much.

[@AnaWhiteDIY]

Happy to hear that Robert!

[@laurieredfearn9091]

I’ve had all the supplies to add a drawer like this, but never thought to build it “backwards” like you expertly show. I’ve put it off because of the nightmare time I had installing a premade drawer the last time. Now I feel confident to stop procrastinating and have a stress free experience. I’m new to your channel, and will definitely check out more! Go girl power!

[@AnaWhiteDIY]

Excellent and welcome!

[@robertpearson8798]

I prefer to pre-make the drawers myself but this is an interesting idea, maybe I’ll give it a try. I always err on the small side with my drawing widths, it’s a lot easier to shim the slides with fender washers than to make the drawers narrower after the fact. I did something similar to your sliding wall cabinet, I built a caddy for storing cutting boards, cookie sheets, etc., that slides out of a bottom cabinet the same way. I’m getting to the point where the hardest part of installing drawers is just getting up and down and reaching in!

[@stilcrazychris]

Ana you just make it look so easy. I know my draw building would take me hours to do plus would be all chalky like. Thank you so much for giving us free tips on all you share. Your amazing. Chris from Missouri

[@jeshua09181987]

I'm thankful i stumbled upon this video since i'm just starting my woodworking journey, this will save me a lot of headaches for the drawers i'll be making later

[@Doc_ChickenFarm]

just did this your way today , wish I would have seen this vid 4 years ago .... would have saved me a ton of grief , this is the way to do it you nailed it. thank you !

[@AnaWhiteDIY]

Thanks for the visit, happy to help!

[@randygeene9455]

Well done! When attaching your drawer fronts you can use playing cards to get your spacing, figure out where your hardware is going to go, and drill those holes uusing those to fasten your drawer front. This avoids having to nail and fix the holes and provides an accurate way to clamp the front tight when you apply a little glue to permanently attach the front.

[@AscDrew]

I think that method assumes the front framing piece of wood is tall enough to have the harware go through it and not be above the top of it. Then you generally have to get longer screws to match/fit the drawer pulls

[@henryrossouw930]

Just again realized one is never too old to learn.Brilliant even though its building it backwards.Subscribed.

[@AnaWhiteDIY]

Thanks and welcome!

[@WillieStubbs]

I now feel as confident about drawer slides as Bill Murray was in What About Bob with a bomb strapped to himself. Everything is so clear now. I can finally do this Ana! Be blessed.

[@Gedelinagadumpy]

Brilliant! Need to build a couple of drawers for my camper conversion and didn’t know where to start. Now I can’t wait to get going! Thank you 👍🏼🤗

[@volition51]

Looks like you made the knife block too, that's one organized kitchen! ❤

[@TheJanice65]

I've just made 6 drawers, doing the maths was a complete nightmare and had to be corrected so many times you wouldn't believe it (never having done this before) I have another 9 to go, and you have just made my life so much easier - THANK YOU!!!

[@ashylarry3442]

I can’t count how many drawer boxes I’ve made over the years and I’ve always pre-made them. This video has changed my mind.

[@pyewhackett1598]

I appreciate you Anna for sharing the information you wish you had when starting to make things with me. Thank you for deciding to be a mentor on YT

[@violet2048]

Just a little tip, I use small screws on the bottom of the drawer after using the staple gun. I've heard people talk about you need to allow for shrinkage or something of the wood, but believe me when your utensil drawer bottom pops off and all those utensils hit the floor, you'll wish you had.

[@diiguiup]

OMG :) loving every work you put out, and you make it seem so effortless ;) boss lady, keep it going

[@whitneypugh2826]

just changed 19 shelves to pull-out drawers using this technique. started in my shop, then did all the floor cabinets in the kitchen. this technique works great. Thank you for sharing!

[@AnaWhiteDIY]

Fantastic!

[@richardmiller191]

Hello Ana - I know this video is over a year old but just want to thank you for posting it. I never thought of this method for mounting the drawer glides before putting the drawer together. What a great idea! Never seen it before. And I like the idea of using the pocket hole joints. I hate glue and clamps. And if you need to make the drawer a little bit thinner you can just take it apart and cut it down. I'm going to re-model my kitchen in my house I just bought and will definitely use this method. Great job!

[@AnaWhiteDIY]

Wonderful Richard!

[@katharinwalker784]

Thank you! I am making a “flat file” cabinet that is 3’ x 4’ and the drawers will be heavy by the time they’re made. This method is not only accurate but saves me time and energy aligning everything while holding a heavy drawer. I can always count on you to provide sensible, innovative ideas for my projects. Thanks again! 🙌

[@AnaWhiteDIY]

Wonderful!

[@toddray275]

Halfway to a Million Subs soooo Deserving of All your Blessings!

[@jeffjames1341]

Thank you. No more anxiety building a drawer and hoping the slides fit around it. You just changed the order of steps for me.

[@AnaWhiteDIY]

Wonderful!

[@alexandermaciag377]

Thank you for sharing these good ways of making things easy to see and use. You are a great helping hand to making life simply every day. Yes, the one I like the most is your pans to slide out and select what sizes you want to cook with. I know my wife and I will be a great help keeping the kitchen even more organized.

[@AnaWhiteDIY]

Happy to help!

[@kimette712]

Fantastic! Thanks for your straightforward delivery. You are an inspiration to an aspiring woodworker like myself.

[@AnaWhiteDIY]

Great to hear!

[@williemitchell9943]

i like the way you did your by installing the side first and then building the box.

[@bladder1010]

I've struggled with drawer slides in the past, but this method seems to be the best by far, and makes so much more sense. Thanks for posting this.

[@AnaWhiteDIY]

Happy to help!

[@huejanus5505]

Just built and installed 4 sliding drawers in my pantry using this method. Saved so much time and finicky math, they all work perfectly. Thank you.

[@AnaWhiteDIY]

Fantastic!

[@Bethanjbjrs]

Loved this tip, so much easier than doing it to a finished drawer! Can I give you my tip for drawers? When I'm putting the front on, I have some little shims to make it an even gap all around, then I temporarily attach it with foam double sided tape. Push it on nice and snug and it holds it in place so you can put the screws in from inside. Just don't pull on the front to pull it out, reach inside and do it from the bottom, the tape isn't that strong! Oh another tip is to make a masking tape "handle" on the top of the drawer front, if you put them all on before putting hardware on and then close them all to look it makes it easier to open them again, especially with set-in drawer fronts.

[@fitzg]

This is EXACTLY the video I've been searching for. THANK YOU.

[@AnaWhiteDIY]

You're very welcome!

[@tonysquibb]

Having had problems with the first installation of drawer slides , your instructions will take installing drawers to another level . Thank you. You were really clear

[@AnaWhiteDIY]

Great to hear!

[@mikecrook8434]

Your alternative vs traditional approach for drawer installation is simple but not obvious. I'm not a woodworker, but I can appreciate your sound analytical reasoning to solve the difficult problem of installing drawer slides.

[@AnaWhiteDIY]

Thank you Mike!

[@thejoshthat]

The line in the middle is a game changer here! Thank you!

[@AnaWhiteDIY]

This was a huge breakthrough for me too!

[@prrk47002]

Anna. I started drilling the holes for the cabinet hardware in the front and driving wood screws through those to hold the front to the drawer box while I pull it out and attach it from the rear. Then pull the screws and Mount the hardware as usual. Something I picked up on KZbin somewhere, but it’s fast and avoids nail holes to fill and double sided tape.

[@frankbrown3047]

Ana I can't think of one video that I haven't enjoyed, including this one. You have an ability to relay information in a way that is easily understood!! Nicely done!!

[@AnaWhiteDIY]

Wow, thank you!

[@cedaroakfarm8596]

OK, first drawer slides, first drawer ever installed today WOW!! PERFECT the first time ever!! Your method is super!! Drawer operates great, level, square and your method makes it so easy and exact. Quite frankly, you feel more like a craftsman doing it this way.

[@AnaWhiteDIY]

AWESOME!

[@kb3svj]

I have 30+ years as a housewright and I must say, you have taught me an easier way of installing those slides.

[@richhempel8929]

what is a housewright, i've been a carpenter for about 40 years and never heard of that before. just wondering

[@kb3svj]

@@richhempel8929 A house wright is a synonym for carpenter/handyman.

[@pipercub45]

Ana thank you! Makes me want to build something with drawers in it again.

[@richa7812]

Another Anatastic method and video. Attempting to build cabinets for my son's first home, together. He has very little woodworking experience. I put him onto your site and I believe we can do one of your projects successfully. Hoping he will develop the confidence to do more himself, so I can stay home more. Thank you, Ana.

[@AnaWhiteDIY]

You can do it!

[@papakraus5734]

you are a very good teacher, most important - you are not afraid to share information you have worked hard to gain over the years. Thank you.

[@AnaWhiteDIY]

I appreciate that!

[@katjapia8206]

Thanks from Germany, I always struggled with drawers, this is the best way 😁👍😘

[@mariap2481]

Beautiful! Thank you! It makes me nervous to see you work on those beautiful granite counters without covering them to protect against scratches and other damages 😱

[@cyndyarmstrong4793]

Oh my goodness! I have been so intimidated by drawers. This is so easy and straight forward. I have used you plans several times and the always turn out great. Thanks for sharing.

[@AnaWhiteDIY]

So happy to help!

[@A41Leslie]

I love how simple you made installing a drawer. I need those inside my bottom cabinets so they pull out. Thank you so much!

[@John5.24]

There are lots of methods to hold a drawer face in place as other people have mentioned in the comments. But if you are going to use a nail gun, I highly recommend pre-drilling the holes for the handle, and putting your nails very close to those holes where your handle would cover them up. 👍🏻 Thanks for the video:)

[@elizabethtrainer9732]

I'm pretty sure she didn't need you to MAN-Splain a job that she did perfectly.

[@John5.24]

@@elizabethtrainer9732 my comment was not intended to be sexist in the slightest. I am just sharing some experience for what I have found to be very useful on my projects. I believe that was the intent of the video: sharing useful experience. Thanks:)

[@buzoff4642]

@@John5.24 It's a useful tip, Michael. Thanks.

[@mrgarner4796]

I love the sliding cabinets. Awesome job. I installed sliding shelves in my bathrooms and the kitchen. I wish I could do something with a couple of 'scary' cabinets that I can't get at. I have an old kitchen and no access to change some things. I have changed what I can and it makes my life so much easier.

[@robinhood2439]

This video gave me the confidence to complete a small job that a contractor refused to finish for 18months. Paid under $30 for materials had a friendly neighbour assist with cutting the wood and we completed 2 slide shelves in under 2 hours. thx Ana

[@AnaWhiteDIY]

Wonderful!

[@galegale1965]

This makes me want to search my house for places to install drawers. Also, I love that you just do all the construction right on your countertops. 😁

[@jylmama]

Oh my gosh! I need more power tools! I want to learn all of this stuff! I'm OBSESSED with hidden storage. I want everything to have a secret storage function! I need to know more about drawer slides.

[@charlottefreismuth3143]

I am 66 years old and had a silverware drawer that was broken I saw your drawer method and I took a chance and tried to make one, much to my surprise I did it and it works, I am so grateful that you shared this video. Thanks so much.

[@AnaWhiteDIY]

Wonderful!

[@powerWithinUs4055]

So many times, I’ve met experienced carpenters who seem to fight the job. Ana’s calm and breaks down her good reasons. Love how she identified the members on the drawer slide….oh. Of course. Now when visitors remark, I can say, thanks, Ana taught me.

[@AnaWhiteDIY]

Thank you:)

[@Crafty.at.Heart24]

This is amazing! I have been so nervous putting sliding drawers in my builds... now I can totally do it! Thank you for your video!

[@mrjasberry]

You started this and I thought, well that’s not the way you do that. Then by the time you finished I was thinking, that’s brilliant. 😀

[@AnaWhiteDIY]

Happy to help!

[@eternalfizzer]

I've fought with drawer slides before - your method of drawing the screw line is brilliant.

[@AnaWhiteDIY]

Thank you!

[@Osmotic]

That sliding shelf at the end gave me a great idea for making my tiny kitchen more functional. Thank you!

[@AnaWhiteDIY]

Glad it was helpful!

[@nicholash8021]

Nice job. I would recommend to use a spacer to set the height above the frame instead of eyeballing it. That way, the drawer is perfectly parallel with the frame.

[@huejanus5505]

Great video. You could also drill the holes for the handles and use a couple of screws to temporarily mount the facade to the drawer carcass, then screw it from the back.

[@irenelee9953]

You are the best at explaining complicated things which is to me so easy. Finally, I understand how to install drawers after all these years to understand it. I really appreciate your channel!! I feel blessed to have found it.

[@AnaWhiteDIY]

Great to hear, thank you!

[@dennisbsutube]

By far this is the best way to install hinges on a newly built drawer bar none! I took the time to plan my new drawers for a bathroom vanity remodel, did the measuring and calculations needed to make a perfect drawer installation. And then I watched your video! Drawings can be perfect, but cabinets and wood have their own personality. Your method is not only easy and fun to do, it makes up for the unnatural shapes taken on by older cabinets or new slightly warped wood. Thank you!

[@AnaWhiteDIY]

Thanks for watching, happy it's helpful!

[@Jkcreswell]

You are so awesome! Love following your page and journey!

[@BitSmythe]

What a wonderful way to have a perfect measurements! And at 10:05 instead of nailing randomly, measure where you’re going to put the drawer pulls, and nail there, but use low energy so the nail doesn’t sink all the way. After screwing from the back, pull those nails, and you won’t have any holes to patch. Especially in melamine, you can never patch and paint to have it look perfect.

[@AnaWhiteDIY]

Great tip!

[@Millasoaps]

I made my first drawer for an old vanity and used your method to install it. It worked perfectly!

[@AnaWhiteDIY]

Glad I could help!

[@tonyaufenkamp4413]

Such an excellent job Ana! I just built my 9-YO grandson a student desk, and now to add a drawer under it… and your video is the perfect example to follow. Thank you so much!! 😊❤

[@AnaWhiteDIY]

Glad it was helpful!

[@moparfan4388]

Love it when someone comes up with genius idea.