Ancient Violin Restoration

[@isaiahbraddock]

Great video! But could you remove the stock music when the person is playing it at the end? I want to hear the violin better!

[@a-ls6333]

Yeah that pissed me off too, very frustrating indeed.

[@andrejohnson6731]

Would you like some fries with that?

[@a-ls6333]

@@andrejohnson6731 eh?

[@iTeerRex]

Yes, that was mistake in editing.

[@bruperina]

Tks

[@geehump]

Completely wild decision to cover the final sound of the instrument with stock music.

[@donnamealy4877]

Bad decision. Feel like I’m at a jr high concert and everyone is still warming up

[@Jehag2]

Yeah. Totally incomprehensible...

[@beatsinabar]

And each at a different pitch, by the sound of t!

[@johnbiteme9118]

I agree 100%. This channel claims to be "Masters of Craft", but they completely messed up the last part of the video where the restored instrument is played. It sounds hideous!

[@funkymonk984]

The video editor was in a rush. The pizza rolls were done.

[@amezcuaist]

Amazing how the violin sounds just like a piano at the end .

[@andrewchan5810]

It probably doesn't sound all that good despite the amount of work put in

[@helmutkrahn9337]

Far more tactfully put (you saved me from myself!). Nevertheless... The "piano" would've sounded better were it in tune with itself! I would like to have simply heard the violin against silence.

[@joe23521]

Yeah, super disappointing end to the video. My guess is it didn't sound very good.

[@Pilcario]

PAHAHAHA

[@luisoluna]

The sound was pure crap.

[@49mrbassman]

As a luthier of nearly 50 years standing, I have to say that the commentary was very good at explaining what was happening, there are several elements that made me cringe. Reconstituted hot hide and bone glue are my own choice for any instrument of such age. I wouldn't go near it with a commercially made product as is used in the making of this video.

[@Julikachen]

Well, it's not a Strad, so... ;-)

[@jasonbutler419]

I noticed that, too, and it had me wondering. I don't have any experience with bottled "hide glue," but I've heard it doesn't really approximate the real thing all that well. Any thoughts?

[@49mrbassman]

@@jasonbutler419 that titebond hide glue doesn't have a great reputation. Unlike real hot hide glue, that stuff can come apart with ordinary water and even then only has a life of about 2 years before it needs reglueing. If your repairing instruments of that age, please show some respect for the skills of the old masters and the materials anx technjques they used (and as for sanding down... Well nuff said)

[@49mrbassman]

@@Julikachen No true but even so it should have been repaired the same way it was made out of respect to the instrument.. I'm currently restoring a 1776 Tomaso Carcasse violin. It was in a far worse state than the one in the video and has taken nearly 4 years of careful wood conservation and restoration techniques, (some of which were pioneered by myself) to get the top restabilised and able to support a minimum of 27 kilos of down pressure.

[@robertbolding4182]

maybe if it were built with glue that doesn't rot it wouldn't need a repair, it's time to change the glue. PVA is reversible with heat and moisture but it wont rot.

[@adirondackcomposer]

Anyone contemplating "repairing" or "restoring" a valuable violin would do well to disregard most of the information/methods expressed in this video. When in doubt, seek the assistance of a professional.

[@jeffhildreth9244]

Frederick Warner.. No fair exposing the folly. Hack job not worth doing. At best this is a Cowboy fiddle made worse by an inelegant "restoration".

[@bryanhaycock672]

I thought it was just me. Something seemed oddly pedestrian about the restorer’s handling of the instrument, methods, and craftsmanship. I’m no expert myself, so I’m happy to be corrected if I’m wrong.

[@knottreel]

Now I get it! That's why they blatantly covered the sound of the violin at the end.

[@catsandcrafts171]

'Pedestrian'. Perfect word for how I felt watching the video, and I thought it was just me, too. Of all the youtube videos I've watched of true master craftsmen at their work, this seemed very imprecise and uninspiring.

[@hifinphoto]

:-)))))))))))))

[@Keyswiz71]

Was anyone else looking forward to actually hearing this beautiful instrument?

[@CT_GAMIN_FF]

Please if you found out the background music let me know

[@indridcold8433]

Fun fact: The Stradivarius violins amazing sound and build was due, in part, to the wood from which it was produced. The wood came from trees that had survived a harsh drought and had very tight growth rings due to the very low growth rate during the harsh times. This wood made for a better sound in the Stradivarius due to the density of the wood. A prospective project to plant trees that were from the same forest and tend to the trees as if they were in the same conditions that resulted in the famed wood was planned. I am not sure if the project ever came into realisation.

[@thecatofnineswords]

Whoa. This is a good example of some parts of the restoration process but there are some sections which horrify me - as both a violin player and amateur luthier. The choice of glues is ghastly. The standard glue choice is reconstituted hide glue, not pre-made/commercial and most certainly not CA glue. That's criminal. Violins are made and assembled with products that allow them to be disassembled later. CA glue does not allow this. I am sorry but this is no professional's instrument, but a practice piece for the luthier at best. I am doubly sorry that the director allowed a backing track to be overlaid over the raw, clean music of the instrument itself. That demonstrates a complete misunderstanding of music performance.

[@SpookyMcGhee]

As a violinist myself this video gave me nightmares lmao

[@willmorrison1022]

Thank you. I was going to comment on the use of the commercial hide glue, which is one of the WORST glues on the market. Miserable holding strength, terrible shelf time, just NOT a good glue. I haven't even gotten to the part where he uses CA glue, thank you for the warning. There is a reason hide glue is still used in violins, though for some parts, I would consider Titebond. But the parts that are supposed to be able to be taken apart later, those should only be doe with hot hide glue. There is a reason why traditions get that way. It's because they work.

[@SpookyMcGhee]

@@willmorrison1022 Exactly. Some people think it's an easy fix with common supplies (usually parents of young students) and try to do it themselves. Last year I had a student whose father tried to put the hair back into her bow with superglue with disastrous results despite me telling the father to take the bow to a luthier. Ended up ruining an otherwise good bow and had to buy a new one. I explained to him that despite the good intentions, there is a reason why instruments should be repaired by professionals and the cost of a professional repair will always be less than the cost of fixing or replacing something that wasn't serviced correctly. He took it to a luthier from then on. Again, there's a reason why luthiers exist...

[@willmorrison1022]

@@SpookyMcGhee Oh, I just lost a "don't flinch" competition when I read that. That move just cost him a TON more than if he'd just done the right thing in the first place. I hope he learned his lesson. OUCH!

[@SpookyMcGhee]

@@willmorrison1022 he did. He's been taking his daughter's instrument to the same luthier I go to any time it needs repairs after that incident.

[@Gary_Texan_USA]

I've played many fine-quality violins in my life and I can say that this instrument is not even mediocre in quality.

[@jellesilence2593]

so it's really really bad?

[@CaliforniaEBRDude]

Fascinating work. What I found must puzzling is why the finger board, nut, bridge, and tuning pegs are done before any body repairs. It seems to me it would make more sense to have a structurally sound platform before working on things that attach to it. I would also like to have seen a more comprehensive professional demonstration of the instrument at the end without the incidental music playing.

[@alvingoh8469]

I was wondering the same thing too

[@paulmcronk]

I think it could well be that he is giving the turpentine time to work on the heavy resin burning on the body. Saves workshop time I guess. Only a suggestion though.

[@ben2808]

Jesus Christ loves you.

[@qritique]

not fascinating. He did a shit job.

[@anthonytaylor9232]

@@qritique Ouch!

[@SpookyMcGhee]

As a violinist myself, this gave me nightmares. If you're going to work on an instrument, do your research first and do it the right way.

[@Platonykiss]

Precisely! But what do we expect of someone who publishes at youtube his restoration? ... I adore Mr Bassman to discuss it so patiently, but any professional get the creeps, if material is used based on synthetic resin or industrial wood glue. Because you destroy the wood each time you have to open it (which you better do not in front of clients!). If there is such thing like craftship of a luthier (apart from the golden hands), it is about using the right material and making your own glue based on organic ingredients and using the right resin for the varnish. Otherwise you better stay away from it, even if it is not made by Stradivari. But ignorants know hardly more than this name. The precious thing is always wood which has more than at least 30 or even hundreds of years.

[@philleggitt3005]

So proud of the sound you plastered the old piano all over it...

[@waltermayr339]

I would have expected to hear a serious audition of the instrument at the end...It was nothing! Why do I hear an electric piano where I want to hear a violin??

[@LisaB_12204]

Thank you for this lovely video of a lovingly restored violin.

[@murrayspiffy2815]

Hey Einstein - you suckered me into watching a restoration on the promise of a professional playing at the end. I want my time back.

[@lowstringc]

While this video is informative, and the repairs shown are either good or passable for the quality of the instrument in question (and done well and consciously), I have apprenticed in full violin shop, and this was clearly a skilled repairer that works more primarily in a “music shop” that deals more with guitars than violins. There are things done here that wouldn’t find their way into a purist violin luthier shop, but would in a guitar shop that does occasional repairs on other types of instruments, but had reasonable and stable results for the quality of the instrument (they say very clearly in the video it’s “built on the strad pattern”, and so many people - myself included when I was young - think his means it’s high quality, when in fact a large majority of instruments are built on the Stradivari or Guarneri pattern, many of which are in expensively made in a production shop, or by machines, some very poorly indeed). I build guitars, and use PVA for laminations, but not for fingerboards due to my background and the ease and excellence of hide glue. I also am an orchestra director that repairs all school instruments myself (very poor district) and I stick to more accepted Luthery practices unless the instrument is already a total loss anyway and I can win a few more years out of it with an epoxied neck but it’s not worth grafting in wood to completely repair correctly (eg. It’s a $500 cheapo that plays but is bad quality in components and sound, but a young musician that has no money could use it for a time). I do have a cello from 15 years ago that had a complete break mid neck, and I glued it together hogged out all but a shell of maple, epoxied a new piece of maple that now comprised most of the mass of the neck, and it’s still going today! It was a better quality instrument, but I was young at luthiery and am still proud of my repair on that one. Still a fantastic sounding cello for a school instrument. So that is to say, no shade on this luthier because I’ve done some non-traditional repairs myself, but some of the choices here (especially the glues used) are not in line with traditional, time tested techniques and the well reasoned philosophies behind the techniques and I wouldn’t use them.

[@georgestorm1080]

I think you are being too gentle, as it's hard to tell what was the quality of the instrument when it has so clearly not been properly set up (or maybe played). It's basically not been given a decent chance. On the other hand, I have no objection to repairing a structural member such as the neck with high-grade epoxy - indeed, I believe this is the correct thing to do - and definitely infinitely preferable to replacing the neck following a simple break, as was done to ny 'cello (by a renouned luthier company) in the 1950s (before I owned it).

[@mplsmark222]

Very nice production values in this video, but the luthier work is sub par. I would never use or recommend the use of cold hide glue for any violin repairs, especially gluing on a fingerboard. It will fall off. Been in the trade for thirty years and have heard a number of bad outcomes from Franklin/Titebond cold hide glue. Use the correct stuff, traditional hot hide glue. Oh, and don’t use Titebond carpenter’s glue or Elmer’s white glue either, cause problems of their own. This was not meant to be a tutorial, but wish videos like this would show correct ways of doing the work. I’ve watch a number of KZbin videos and rarely do masters of the trade make these kinds of videos. They are too busy doing fine work on the instruments.

[@SpookyMcGhee]

I once had a student whose father tried to put the bow hair back into her bow with superglue with disastrous results despite me telling him to tske it to a luthier and that it won't be very expensive. Ended up having to buy a new bow. After this I gave him my preferred luthier's business card (No affiliation or anything, she's just a great luthier hence why I recommend her to my students) Long story short, he's been taking his daughter's violin to this luthier ever since and hasn't ever tried to do it himself again.

[@mplsmark222]

@@SpookyMcGhee Any luthier that has been in trade for a time has encountered poor amateur repairs that need to be redone. Sometime it is just redoing the work and sometime the problem has been made much worse by people with just enough knowledge to make them dangerous. Using the wrong adhesive is very common and can make a real mess of things. A simple rule is only use glue that you know you can soften with water and will hold things together provided the parts fit together well. Not all violins are rare and valuable and I don’t care if people want to mess around with them. Just don’t like when people make videos and give others poor advice on how to do repairs. I once watched a video a guy posted to demonstrate how to rehair bows. He said from the beginning he had never done a rehair before! It was a disaster, he broke the bow and the hair was way too long, uneven and unusable. A real waste of time and money.

[@robertphillips93]

As a retired bookbinder who remembers the aroma and adhesive strength of hot hide glue, these criticisms make a lot of sense. As a craftsman too, it is evident that the young luthier has enough gaps in his praxis to qualify his repairs as workmanlike, but not masterful. Unless you can learn from a master, the only way to get very far along that path is to try and fail with a multitude of materials and methods. Not only is that impossible in most commercial settings, it would require an uncommon kind of curiosity and perseverance in the apprentice.

[@PaulLefebvre936]

@@mplsmark222 do you still have the link of this video? I'm sure I will love it 😏

[@mplsmark222]

@@PaulLefebvre936 No sorry, it’s been a few years so it may not be available. I’ll look for it. I find it relaxing to watch a true craftsman work, like Norm Abram’s old show. But when a hack makes a video, it just makes me wince. Especially when they are using a cutting tool.

[@stanwest3529]

that violin sounded like a piano...how did you do that???

[@panoramicviolinist]

😂

[@Valery-wq5uh]

😂😂😂😂

[@fasteddy07]

Based on the channel being called Masters of Craft, I expected to see the work of a professional luthier. 😣

[@jellybeans6533]

Modern-day spelling of the ancient word "crap". I don't doubt that this guy is a "professional", working in the back of some music store somewhere. But he is not a luthier.

[@GaryGP40]

My violin was built by a master luthier, who showed every step in making one just like mine. Pretty much nothing he does is shown here (no disrepect) but lovingly creates a work of art that will endure for years.

[@MichaelButchin]

WHY did you keep playing your background incidental music when testing out the newly restored violin? I would have liked to have heard it clearly.

[@OmarFernandesAly]

Thank you for this beautiful video that shows the 19’s violin restoring.

[@CosmicVitamins]

Many of the techniques shown here are appropriate for restoring student guitars of minor value.

[@RobbieHatley]

Yes. Anything under about $100 and for use by persons in the 4-11 age range. But as for persons age 12+ or violins priced > $100, see an actual luthier instead.

[@hifinphoto]

:-))))))))))))))))))))))

[@JoanneOP]

I’m looking forward to a video of the restoration of this man’s desk.

[@paulmcronk]

How refreshing that no attempt is made to re-finish the instrument. So many people do not realise that the original varnish is an essential, integral part of a violin. Over the years I’ve seen so many beautiful instruments ruined by re-varnishing!

[@TealCheetah]

Um... whats with the end piano/noise instead of the violin???

[@rocksem9451]

Excellent work but I have a couple questions. I'm assuming the interior was fine but why not include the inspection? You replaced the sound post at least. Why place the fingerboard etc. prior to cleaning and repairing the body? Were you not concerned the body repairs may cause shifting of the neck? I would also add just a demo of the violin alone at the end would have been preferable.

[@Leon-jd5ii]

Yes, that's what worries me too.

[@ahh1180]

Cause he is an amateur restorer that has no business working on violins

[@captainfancypants4933]

its a piece of crap violin, you can tell look at the grain on the top plate super wide indicative of cheap wood. This is a cheap early 1900s factory violin that anyone could make sound half decent with any sort of professional experience. That's why the guy covered up the violin being played with music

[@orirune3079]

I was wondering about the cleaning too - seems like it would have been a better idea to clean it before replacing the fingerboard.

[@markuswx1322]

@@ahh1180 Apart from the dispute about the glue he employed I did not observe any repair techniques inconsistent with professional work. What are your points of disagreement?

[@jhdgdyhi8]

If i had a violin worth 30 dollars I would not let you go near it. You are a luthier like I am an archbishop.

[@PontusThuvesson]

Well, everyone is allowed to to do whatever they want with their instrument. But... Quite some stuff done in this video is not very "traditional". Some hundred years of experiance with violin making and repairs couud be worth considering.

[@alphamegaman8847]

As soon as I witnessed the state of his work area and shop, I would have said No Thank You, and walked out!😒

[@ewabrodacka9703]

Lol 😂 maybe you are archbishop

[@clairearendse4877]

I'm a guitarist and I make classical and flamenco guitars. I can see he's got good hands. He used that scraper well. I'm no violinist, or luthier but as a lay person I was a bit surprised to see commercial hide glue being used for fitting the fingerboard. If someone used C.A. glue on a guitar I had made I'd be upset at someone hurting one of my babies. I tend to think that whatever you do needs to be reversible. Select your glues accordingly. Wherever you can make them yourself to a trusted recipe and method. I've fitted guitar fingerboards with hot hide glue, and you can do it in about ten - fifteen seconds if you've honed your method. I was surprised at several methods and materials I saw in this video. Interesting video. I'm pretty sure if someone looked over my shoulder when i was making guitars they would probably critique my methods and materials too.

[@RobbieHatley]

Yep, this is a carpenter making a "violin-shaped object", not a luthier making a playable violin. If you want to see the real techniques, there are several actual luthiers with channels on here; just search for "luthier" or "violin maker" or "violin repair" to see how the actual professionals do it.

[@ericswain4177]

I am a novice at repairs and I had the same question, I spoke to a pro luthier and he was adamant about only using Hide glue on violins and the like as it allows easier removal and repairs in the future as well as better expansion and contraction of the woods. Was that the original sound post? there is a tremendous amount of important information on the subject, what it is made of, how to make it, and placement is extremely important to the quality and tone of the instrument.

[@Joe___R]

You were able to clean up that fiddle pretty good. Why did you not clean up the body before attaching the fretboard? It would have been easier without it in the way.

[@ianburkard]

If you're going to critique, at least say fingerboard. xD There are no frets on a violin.

[@TheMissing62]

@@ianburkard Whatever 🤷‍♂

[@ruslans8033]

I have the same thought

[@berry.1uvr]

Violins don’t have frets…

[@jellybeans6533]

Violins do not have frets. (Needs to be said again.) Why would you want all of that ebony dust on your freshly-finished violin? But I would have done just about everything else differently from this video. Besides, completing the fingerboard is an iterative thing. And you really need to string the instrument to finish the fingerboard, unless you don't care about how well it can be played. Considering how they overlaid other music over the person playing the instrument, I suspect it was not a priority.

[@raywood8187]

I don't know anything about violins, I saw a lot of criticisms but I'm glad I could just watch it for the enjoyment of something being restored. Only one thing, I cringed at the end when background discordant music was playing over the violin, I really did want to hear it played but just pure violin.

[@lgyqchen5074]

在我看来，对于老琴，尽量不要用reamer去改动弦轴孔，应该尽量修pegs。(In my opinion, for old pianos, try not to use the reamer to change the peg holes, but try to shape the pegs.)

[@crgaillee]

Yeah..., well; this..., " Luthier" took perfectly sized peg wholes and reamed them till they now look big and gawdy. Now many years from now when it needs to be redone, it will need an entirely different head piece! The man who created this would be furious to have his name on this! It's like the difference between delicate butterfly antennae and bull horns!

[@chuckschillingvideos]

Yep. It's especially egregious since peg heads can very easily be turned on a mini lathe to whatever diameter and taper is needed to achieve the correct snug fit.

[@voraciousreader3341]

*@crgaillee* - “Gawdy”?? I think the word you want is, “gaudy,” unless you meant to add some kind of misunderstood (by the reader) emphasis of the rustic, “Gawd,” for “God.”

[@TheVergile]

1) if the wholes are bad you gotta ream them. no way around it. they may be perfectly sized but if they arent round anymore thats worth a wet handshake 2) in case this ever becomes an issue in the future it can be easily addressed.

[@ameliacampbell5246]

I wondered why they were doing that. I thought that was a technique when first making the headstock rather than fitting keys for a new one (please forgive my use of guitar part lingo, I’m very new to violins). Thank you for catching that! I can’t wait to keep learning! :)

[@michaeldicarlo5540]

Musical instruments are amazing, I've had a cornet trumpet sitting in my closet for 15 years finally brought it out fixed it. Only to find out it's from 1899, its amazing to think that over 100 years ago someone used this instrument to bring happiness to people. Amazing work absolutely beautiful

[@TheReddkatt]

As a brass specialist Im sorry to say that brass instruments dont really get better with age like stringed instrument often do

[@melcrose]

"Bob, they've been waiting this WHOLE VID'JA TO HEAR IT, what say we just really turn up the pie-anner on that part, eh?"

[@robertbolding4182]

its not the curve in the bridge that transmits sound, it is thinned so its harmonics are changing with the string vibrations and can make the strings have a fluid support

[@franciscosiqueira7723]

a obra mais perfeita que foi inventada pelo homem 😍🎻

[@blueduck9409]

The piano pounding in the background covered up the violin. Whats the point, if we can not clearly hear the violin?

[@notasbignow1]

Absolutely amazing really happy that you was to save that Violin 🎻 I really enjoyed your video 🙏🙏

[@nullifiednullifidian5973]

0:26 "makes sure to wait to the end to hear the fixed instrument being played by a professional" 19:16 turns out the professional is an expert cat killer, and all we hear is the wailing of the poor creatures as they depart this Earth, with copious amounts of stock music overlay to try and hide the true horror.

[@knottreel]

Maybe the purpose of the piano music was to hide the violin.

[@RobbieHatley]

@@knottreel : Yes, definitely. I'm pretty sure this violin was unplayable after this carpenter got through butchering it.

[@youcanactuallysing]

This violin has seen more than any humans.. 150 years old.. Happy Birthday Violin! ♥☺

[@TheSecretmuseum]

Nothing like having an unrelated soundtrack playing over live music in the film.

[@rapidfire4202]

Sacrilegious!

[@mortimerlojka5912]

"Masters of Craft": not sure about that... - “Cleaning” with turpentine is a “no-no” (especially this kind of bad turpentine): it slightly dissolves the original varnish, and as it contains itself a lot of resins, it will embed and fix dust particles into the now weakened varnish. Gently cleaning with a wet cloth dripped in warm water is a far, far better choice. - Use hide glue/ animal glue. Seriously. It’s the traditional way, still today, for many good reasons. At least for serious violin makers… People using it know that it works great, how it reacts with wood, for how long, how to reverse it if necessary, etc. But we don’t know about modern glue: how will it react, over time, on the surface? One case among others: what if the top needs to be removed for a future service, and that the glue is too strong? It might very well damage the upper/ lower/ C-ribs, and make the job much harder for the luthier, and risky for the instrument. For no reason. Also, some actions displayed in the video where probably not made in the right/ best order.

[@AmandaViolinGirl]

A professional luthier has made a reaction video to this one. I was not impressed by what he used on this violin. Go to Ask Olaf The Violin Maker to see it.

[@131dyana]

Yhank you for that rebuild. Loved the care given .

[@matthewbrook7683]

You wrecked the whole video with the piano music covering the sound of the violin. I want my 20 minutes back.

[@adirondackcomposer]

did he super glue the nut?

[@dudeforcaster8630]

Yes! And used titebond for the fingerboard. not a skilled repairerl

[@42Guava]

Would've been nice to hear the violin by itself.

[@flymflam27]

I love the way you put the back of that priceless violin hard against the edge of your workbench @1:43. Right fucking professional guy!

[@jaatelomiess]

Priceless?

[@Jpatient]

@@jaatelomiessstrads can’t be replaced

[@jaatelomiess]

@@Jpatient That ain't a strad my guy, it's a replica

[@Jpatient]

@@jaatelomiess oh lmao because why would anyone let this guy restore a strad and it sounds awful afterwards

[@askianoskok6816]

Wtf is this new age violin lutherie? Thank God it's not a real Strad!!

[@Vietitier]

That was not even a restauration haha just normal care

[@jackbauer2698]

He restored it so well it now sounds like a piano, must be the magic effect of CA glue 👏

[@vicbanks9079]

all so caring and considered. the end of the vid you masked the tone with background music. wanted to hear the pure violin. hmm?

[@ROMANABSOLUT]

Q : why does the finger board is glued before any other operations like turpentine cleaning, side damage repairs, peg box and tuning pegs ? As a non-luthier, I would start with these few operations before installing the finger board. I've read the same question was made without getting a professional answer.

[@krasibotev8442]

This man is not a luthier, but a simple restorer.

[@valeriorodorigo3275]

I am not an expert but as a violin player I can say quite surely that this violin was a 19th century, probably cheap, study violin. The maple used for the sides, the neck and the back of the instrument is a low quality one and the huge rosin stains indicate that the owner didn't care about the maintenance (very tipical of young players) . Being a stradivari copy doesn't necessarily mean quality

[@chrisirwin9612]

Really? Superglue on the nut? Wood glue on the fingerboard? These are wear points, and need to be periodically replaced.

[@rainbowhawk911]

I was hoping to see the violin played, once it was restored. Thanks for that. May Jesus bless you all and lead you to Him!

[@acommenter5184]

What does "19th century replica" have to do with "Ancient Violin"? Nothing that I can think of.

[@kdtrimble]

Jeez, the piano.... I wanted to hear the sweet sound of this violin.

[@darrenbreeze3337]

The luthiers who are watching this are screaming in pain

[@Julikachen]

Well, I am 😬

[@PaulLefebvre936]

Or laughing, sending the link to there friends. Well that's what I'm doing 😅

[@maxvarjagen9810]

I know nothing about restoration and I'm just cringing at the order they did it in. Why would you replace the neck before repairing and polishing the body?

[@violinmiata]

This was like watching a idiot mechanic working on a garbage car and making it worse

[@AlanW]

I'm pretty sure they had an intern do this one.

[@lgyqchen5074]

I use just water and a knife blade to clean the residuals on the neck surface.

[@billreediii217]

Interesting video. A few observations. The instrument is typical of the thousands of student models that were produced in Europe in the last couple centuries. I have worked on hundreds of them and still have around fifty in my shop. Many are without corner blocks or a viable baas bar. Their only redeeming quality is the fact that many have decent wood which makes restoring them a worthwhile effort. Agreeing with others who commented, using bottled "hide glue" is not a satisfactory substitute for quality hot hide glue. Also it appears as though the pegs were much too thick which if so would be a case for not having to bush the peg holes.

[@amorroma1244]

Why not clean the violin thoroughly before mounting the fingerboard in place? I don't really understand the order of restoration. And, I would take the violin completely apart to clean the inside. Do you know if that has to do with budget?

[@pyro-millie5533]

This is fascinating!! My favorite thing is that you didn’t try to use a dark stain or anything to cover the patina the wood had developed over time. Simply cleaned and repolished and let that history become central to the look of the violin. I also had no idea that violin pegs are a simple tapered friction fit. That’s so cool! And the custom detailing on the pegs and bridge is wonderful. I wish that the background audio was muted while the violin was being played since it clashed with the violin melody though.

[@loiseaunoir1021]

Thank you, this was wonderful to watch

[@jdavidkatz]

Very bizarre that we could not hear the violin being played at the end. It utterly ruined the video.

[@metepack4872]

We did hear it screech.

[@chriscrilly8807]

What actually ruined the video was the talentless, untrained butcher, pretending to know what he was doing and saying. This self-styled "luthier" (pronounced 'LÜ-TEE-AY' by the way, not 'LOOTHEER"-if you're going to use a French word, learn how to pronounce it) could perhaps build a half decent chopping block. As for his skills as a luthier, most of us out here are rolling in the aisles. Run, don't walk away from this idiot.

[@SergioPena20]

It’s almost as bad as when people write the outcome of the video in the comment section.

[@peta-gayeshaw895]

@@SergioPena20Boohoo for you. I’m happy they did I watched half the video just to see the end resells. So glad they spoiled it.

[@SergioPena20]

@@peta-gayeshaw895 👍

[@LadyLeigh]

Beautiful restoration and so informative.

[@campbellbluestone1837]

very interesting to watch but you can't help but think that after all that the sound of the restored violin was not all that iimpressive when you play music over the top of it being played

[@ds61821]

For the record, at 13:50 he says he applies wood glue. It's not wood glue but Hide Glue. Hide Glue can be removed if needed for later restorations, wood glue cannot (without damaging the instrument). I learned this from Olaf Grawert.

[@smcneil9584]

lol love the comments. Thanks guys. Makes the hatchet job on the violin more bearable :)

[@i9t-f4h]

ㄹㅇㅋㅋ 20분 아끼기 성공!

[@david203]

Why was the final playing so hard to hear against the loud and unrelated music chosen to accompany it?

[@richardminnich4249]

Something that was never addressed in this video: yes, the violin was old (not ancient!), but what made it intrinsically worth putting the effort and money into restoring THIS violin? Had it been made by a well known luthier from its time? Had it been played by some well known violinist? To be honest, I didn’t think that the sound of the instrument at the end was all that impressive (granted the music playing on top wasn’t helpful.) But I didn’t hear the depth of sound from the instrument that I expected from the lead in to the video. Thanks, though, for showing some interesting specialized tools and clamps during the repair process.

[@jasonkohlman4092]

@@anniesamuel4787 The violin in this film is not a stradivarius, it is a mid 19th century copy, as the narrator states

[@jacobbrown7367]

Aside from being a mid-19th century copy of a stradivarius, there isn't anything notable. Which is good, because using titebond on an instrument is criminal

[@PaulLefebvre936]

To me, it looks like an early 20th manufactured violin as we saw thousands of it... so a big value, but enough to be reset up and sold.

[@hoshmoggen1746]

@@anniesamuel4787 it's a strad copy. He said it several times.

[@LiliKoblentz]

@@anniesamuel4787 This is a Strad copy. Even fully restored, that violin is worth a few thousand at best.

[@evoandy]

Not a terrible restoration video. I have definitely seen bad work, but the mark of a Luthier is seen more in the Shaping of the f holes and scroll than in the shape of a bridge which is usually just a blank that the luthier finesses to fit the top of the arch of the top of the instrument and the correct shaping and arc for the strings. My repairman worked about 200 miles from me but it was worth it to drive to him because his work was borderline magical. Every time I retrieved my instrument from him after an adjustment or repair I had an all new honeymoon period as though I had just met her.

[@walteralter9061]

I would have repaired the loose joinery and cleaned the body before fitting the fingerboard.

[@lowstringc]

Absolutely. And taken a look inside, at least with a mirror if not a top off, to make sure that the bass bar was ok. I did expect, however, that he would be doing deeper varnish work though, so maybe that was his reasoning (that he was only polishing it up - but it still would’ve been easier and achieved a slightly better result done fingerboard last)

[@walteralter9061]

@@lowstringc He did check the sound post much later in the video, so maybe the bass bar got a going over as well. I'm surprised that he didn't take the top off entirely and clean up any crystalized bone glue. No telling where else along the seam the glue might have been ready to let go. This was not a professional at work.

[@piusfelix]

Why wouldn't the repair, cleaning and polishing of the body have been done before the fingerboard, bridge, and pegs are replaced?

[@arturkuznecov154]

Всегда с уважением отношусь к людям умеющим что либо делать своими руками - МАСТЕРАМ !

[@michaelcox-pq2jm]

I agree with mrbassman49. I have an old violin (Circa 1796) with a fingerboard that had been replaced with one attached with white glue. I had it replaced, because frequent playing had gradually worn down the original fingerboard, with a new one using an animal hide glue. I winced as the first fingerboard was removed leaving shreds of wood still attached . The animal hide glue is much more forgiving and can be softened with heat to make repairs. We're just custodians of these old masterpieces. I needed to add wooden bushings, and repair the cracked pegbox. I keep it in a humidified case.

[@everrime]

18:44 "We would like to think the renowned luthier himself, would have been proud of it" 😅 And I would like to think that statement wasn't completely detached from reality. Oh well, at least you did a nice job filming and covering the horrible sounds at the end with stock music.

[@James-ds5gl]

Glad I waited till the end to hear the professional play it.

[@jamesreed1969]

The glue used in connecting upper and lower decks to the body is NOT WOOD GLUE. It is HIDE GLUE. That is exactly what was used here. Just to avoid a damage of violin in case some one watches this video and decides to repeat it. Hide glue is not permanent like wood glue.

[@ositoCastro]

I only saw a set up, a true restoration is something that concerns the structure of the violin

[@timwest225]

Well done, for a Blacksmith's Shop using Carpentry Tools

[@rackets001]

"We will leave you with the sound of the violin being played." With some random music masking the sound of the violin being played.

[@26Bluegb]

The guy doing this is not a "Master". This was horrifying to watch!

[@ldeemou]

Your choice of glues will make the work of any subsequent restorer a nightmare. After all, we should not forget that such instruments, if properly taken care of, will outlive us all.

[@alfieharries]

'we will leave you with the sound of the violin being played, at the same time as a modern piano piece in a totally different key'

[@panoramicviolinist]

😂

[@cathysmith1796]

I would like to hear more history of this instrument , and the value after the completed restoration.

[@RavenUwU605]

Considering that they didn’t even play it at the end I doubt it’s worth anything

[@ianburkard]

With nothing extensive being done/repaired to the body and neck of the violin, this is not a restoration video, it's an extreme setup video.

[@islandfunhouse]

I wouldn't let this guy go near a quality violin or archtop guitar.

[@edcew8236]

When you put a rag over a bottle of solvent and tip the bottle to moisten the rag, you risk contaminating the solvent still in the bottle with whatever grime is in the rag. Safer is to pour the solvent onto the rag. A $10,000 airplane paint job was once ruined by contaminated solvent... had to be repainted.

[@PaulLefebvre936]

Thanks. And that was the only controversial thing to notify in this video! 🤣

[@RobbieHatley]

@@PaulLefebvre936 : Yes, just about every aspect of this video is bad. Carpenters shouldn't pretend to be luthiers.

[@dflo4165]

I am no professional violin player. But I agree with others about when to put on the fretboard, the glue used, and never heard enough of the violin. I definitely heard enough of the damn piano!! Especially while the violin was played, and not long enough!!

[@berry.1uvr]

It’s a fingerboard…violins don’t even have frets💀

[@dflo4165]

@@berry.1uvr thank you, I stand corrected. Too used to guitar talk! Be safe!

[@anonamous6968]

The piano playing over top of the violin music was a bit distracting. I wanted to hear the sound of the violin alone. It's tone.

[@MrGuto]

Nice job and nice video, except after 19:15 I wish there was no background music so we could hear the violin.

[@MyName-nx1jj]

This is like watching a bricklayer restore a Ferrari.

[@hxhdfjifzirstc894]

Thank you very much for saving me the waste of time... I was about to watch this video, but I hate watching 'pretend' restorations (quite common nowadays).

[@kelamuni]

Titebond "liquid hide glue" will separate in high humidity but curiously will sometimes be resistant to steam.

[@williamshaver5524]

This wasn't a restoration, it was a refinish.

[@xxxxxxxxy11]

The luthier chose to replace the finger board first. Why? This complicated the breast cleaning. Then he only partially re glued the breast and back of the ancient instrument. Separation of the breast and back defines a “full restoration” which would allow for full inspection, cleaning and structure evaluation.

[@HappyG1lm0re]

Just to be clear, absolutely no one thinks this "luthier" did a decent job. This is astonishing.

[@WerewolfMaster]

Because he didn't - it's ruined violin sound because of what he did with the glues

[@43painter]

I agree with the objections made in several comments below and I would like to add one more : why isn't the inside of the violin checked and cleaned?