Andrew's Snap On Service Cart Tour!

[e-mail]

[@ReneArenasFlores]

camera was steady good. no headace...good video . not to much crazy camera movemment..could watch the whole thing..cool cart..thank for sharing

[@garrisongarage1505]

Nice setup... Everything seems to be laid out great and easy to get to most used tools... Thanks for sharing... It's like I always say... Let's all learn from each other...

[@flatratemaster]

He does have a very nice set up!

[@Freetheworldnow]

I do like this green very much. It is vibrant. Good to have around on a dark mushy day... Didn't see the coffee cup holder...

[@BeerStud]

Thanks for the video, after looking at his tool cart, got some ideas for my green snappy.

[@flatratemaster]

Cool!

[@me5ponk454]

I had this same cart for a while. Served me very well.

[@duckmonster921]

Ha i just sold my socket logic snap on set standard and metric. Would have sold it to him knowing that he like that set up.

[@wayneshanks148]

Awesome box and tool's brother

[@HardKnocksForge]

Green is for winners. He has some really good stuff in there. Like the socket holder also

[@flatratemaster]

LOL

[@garrisongarage1505]

Hey Knocks... Yeah the green is cool and all but I'm old school and like my boxes to be red... Same as engines... Red all red... As far as the eye can see... LOL... Red...

[@HardKnocksForge]

Yeah my box is red. If they would have had a green one, like my truck, I would have went with green. I would have also went with Chevy orange, since that would match the big block that needs to go back into my truck.

[@eliezerramosjr1017]

Hard knocks Forge I thought I was the only weird one with a orange craze but most of not all my ratchets handles are (Matco) along with my si civic I had 20 years ago

[@anandarochisha]

Awesome..i tend to keep taps and dies and files and measuring equipment like calipers and dial gauges and micrometers and a leak down tester and a compression tester and vacuum gauge and and ring compressors and ..oh geez how many tools are there ?

[@EXOVCDS]

4:54 What brand drawer organizer? Or are those desk drawer organizers? Hmm, looks handy! The red one at 7:25 as well.

[@flatratemaster]

I think they are kitchen drawer organizers, he got them from the dollar store:)

[@leonspringsboystv2025]

I just got the same one... Just wish it had swivels on all four wheels... Other than that it's a perfect cart.. and I only paid 1200$ on mine used

[@Alanthe918mobilemechanic]

I really like his set up

[@wcollins4191]

I really like the Matco pneumatic fan clutch set and it works great. Andrew box gets a thumbs up

[@flatratemaster]

Thanks!

[@joeframer9642]

Good job, good cart👍

[@nerdelac13]

I feel I have the same amount of tools just bigger less specific tools, just everything I work on is 3/4 and above or 16mm and bigger up to 2”/32mm and my longest breaker bar is 4.5’ tall

[@flatratemaster]

LOL, Big trucks or equipment is a very different story on tools

[@andrews6641]

Trying to decide between this cart or the Cornwell.

[@RussNavara]

good video thank you keep them coming

[@flatratemaster]

Thank you, and I will!

[@lowkd5465]

Whats the part number for the side accessories from snap on to put my cordless tools

[@fernandoaguila8901]

Nice Video 👍👍👍 My only problem with big tools carts is that it gets heavy and you gotta lug that thing around the shop. I have the Snap on 4 drawer tool cart and I love how small and maneuverable it is. I can go under racked cars and between racks. i move around the shop a lot since I'm the lead technician. that's just how I feel. keep up the good videos. 👍👍👍

[@flatratemaster]

Around our shop, we almost never move bays, so not an issue, but I understand what you deal with, If I am helping another tech I normally just bring the tools I need to help.

[@pedrodepacas9768]

Squats.....

[@maxwellpeter1598]

Fernando Aguila I have the same box just split top and black I always go under racked cars and all over the shop just don't over load the drawers kepts weight down

[@robertkotula5389]

He has plenty of space for his extensions and ratchets to lye next to his sockets up top. Also the inside of the flip top is hardy being used. Prime real estate. Get some magnets and hang your most used tools.

[@loweaguirre454]

New subscriber here !!! Love this cart. Do You by any chance have the model number to this green box? Thank You and looking forward to seeing Your other vids.

[@AlexWrestlingLeon]

What model number is the slots and dots? I bought a green one and it didn’t fit same cart but slots and dots was to big

[@JuanNOnly123]

Where’d he get those “cheap” bit holders, never thought of doing that with my bits but it sounds like a good idea

[@flatratemaster]

Amazon just get them and knock out the bits and install better quality

[@genxmurse7019]

It's a shame the Socket Logic is no longer available. I don't see why another manufacturer won't make something similar.

[@embreesmith7613]

fukkn' genius level ..!1

[@gizzync1525]

Gave me some good ideas what i Need to be buying next.

[@flatratemaster]

Cool glad I could help!

[@startingtech3900]

Just subbed. I put my notice start as a lube tech. This is helpful thanks

[@darwindropmazda]

Good tour👍

[@flatratemaster]

Thank you!

[@davidcallahan5157]

I am new to your channel but like your videos . Got question flat rate mater why you decide to go with matco box and cart was it price or size for the Money . My matco guy was ass but there boxes have come along way .

[@flatratemaster]

I really like my Matco dealer and he had it on the truck, and gave me a great deal on it, show special pricing. Plus I never liked all the small drawers on the Snap On Masters and my Snap On Dealer doesn't like the Epic Boxes

[@CreepinCreeper145]

Is that the KRSC46 series?

[@davidcallahan5157]

Thanks for reply !

[@flatratemaster]

I do my best to reply to all comments:)

[@chrischiampo8106]

Awesome Color 😎👍🏼🇺🇸

[@flatratemaster]

:)

[@dillwiggle2]

Green rocks !

[@karzilla810]

Is that a 36 inch cart ?

[@johngibson3594]

Thanks for another great vid

[@johngibson3594]

Tell him thanks for letting you do the tour

[@flatratemaster]

Thats for watching:)

[@flatratemaster]

He has been asking me all week when it would go live:)

[@jamesg7022]

What are the blue rails on the right? I want to stand up all my torx, hex, flex sockets ect but most rails are kind of tall which may limit the length of socket that can fit in the drawer. Thanks.

[@flatratemaster]

Vim Rails here is a review I did on them kzbin.info/www/bejne/mJDdZaGarbFpmKs

[@jamesg7022]

Thanks. They're pricey as you say, but look like exactly what I'm looking for.

[@flatratemaster]

Me, James and Andrew all have them and we love them!

[@mrmurdx8956]

Noticed that there's no 1/2 IMPACT GUN NOR 3/8 DRIVE IMPACT GUNS so how does he remove wheels and CV boot lock nut shocks struts ?

[@flatratemaster]

32 seconds in, i talk about the impact rack on the side of the cart, with a Milwaukee 1/2, 3/8 in and 1/4 in impacts

[@joeframer9642]

Flat Rate Master right ? Geeeeez

[@DerAngriff]

What weight is the Snap On Brass hammer? Looks like a 24Oz.

[@flatratemaster]

Yep

[@longelevenandahalfdong9586]

That intro yells early 90s training videos

[@flatratemaster]

I was going more for 80's cartoon intro :)

[@Ken-wu6hr]

I Hate Green. But that impact Holder is cool

[@flatratemaster]

Snap On Accessory

[@moicer1]

Nice box and set up. Do u know what size this box is. Thanks

[@flatratemaster]

store.snapon.com/KRSC46-Series-Roll-Carts-6-Drawer-Roll-Cart-Extreme-Green--P884095.aspx

[@mikezupancic2182]

For the life of me I have no clue why people buy such expensive sockets and wrenches. The specialty stuff I can understand, but to pay 10x+ as much for a socket set seems silly to me. FWIW I work in maintenance and so I also make my living off of using my tools and hands, so that excuse isn't going to fly.

[@joeframer9642]

Let me guess, you love harbor freight

[@michaelsieber6601]

Specialty sockets barley get used so cheeper ones are fine

[@SxxyCoy]

rust belt

[@bryanbethea8335]

his setup is pretty cool. Milwaukee fan I see.

[@flatratemaster]

He can blame me for that addiction:)

[@bryanbethea8335]

Flatrate Master they make top notch products with unmatched power, reliability, and warranty. hard not to like them.

[@ARluvr1]

Bryan Bethea Milwaukee cordless tools are best out there.

[@bryanbethea8335]

ARluvr1 speaking of Milwaukee. I dropped my 3/8 m18 fuel from about 4 foot a little while ago. Still works fine. Hasn't lost any torque in the 8 months or so I've had it. Now I'm itching for the mid-torque m18 fuel after seeing a review on it. I can't justify it though because the 3/8 does everything I need a cordless to do. They are coming out with fuel ratchets. Strong as an air ratchet. I can justify that.

[@ARluvr1]

Bryan Bethea yeah I have the 3/8 and 1/4 ratchet now but can't wait for the fuel to come out. The 1/2, 3/8, 1/4 impacts are unbeatable mine have been thru hell and still work like new.

[@DOYLECLEVERLOBE1]

He's got a nice box there, makes me want a mojito.

[@flatratemaster]

Yes he does!

[@gregoryfairchild2460]

I've got the green ...c'mon now hemi cufa green..lol

[@gregoryfairchild2460]

Cuda

[@quychang4471]

I have this same tool cart that I traded in my Matco for. BIG mistake. The Matco cart sheetmetal was thicker and the drawers were sturdier and smoother. Anybody want a Snap-On tool cart?

[@theForestWhitaker]

have the same box a bit expensive what worth it to me.

[@flatratemaster]

Very nice box!

[@leonspringsboystv2025]

Forest Whitaker I got it used. 1200$. Still in perfect shape. And even full price 2000$ is nothing compared to how much it will make you in a lifetime. 25$ a week ain't shit

[@joshmacdougall3360]

Love that gree

[@normansmith7806]

Good video! That's the cart I'm trading for but in blue to match my Epiq. Hey I got to match :)

[@flatratemaster]

LOL, very nice box!

[@noahnewcomb6473]

whats the model number of the cart

[@flatratemaster]

store.snapon.com/KRSC46-Series-Roll-Carts-6-Drawer-Roll-Cart-Extreme-Green--P884095.aspx

[@il94z12]

Too bad that cart cost as much as it does or else I would've bought it by now

[@flatratemaster]

Great cart though, and he got it used

[@th33b33]

you can get a green Homak 7 drawer for $515 or a Cornwell for $1299 or buy used snapon

[@il94z12]

Flatrate Master I just bought the same model but flat black for about $700 less with taxes. I absolutely love this cart

[@il94z12]

michael bertucci I had that Homak one for a year and didn't mind it at all but I grew out of it and mad $150 off of it when I sold it

[@ridingwiththereids]

I've got the same cart....sorta. It's a Snap-On, same configuration, but only 3 drawers deep. Do you know if I can add on more drawers?? It sure would be nice being as I got the cart (basically brand new) for $40...

[@flatratemaster]

It is possible but not cheap, gotta order new drawers

[@johnbailey9682]

If he would have bought a cheaper box he would have had $1500 hundred bucks . Guess what the tools get the job done not the box . Oh and that’s what the SNAP ON guy told me .

[@stevea5985]

Most common tools used daily hmm all in one wheeled cart . So why buy a huge box for thousands that sits there untouched

[@flatratemaster]

+Steve A i have 2 huge tool boxes that i am in all the time, the cart is about the repair the big boxes are for testing and special tools

[@wallyg.2409]

Andrew has a pretty nice set up.

[@zephyteh2628]

Messiest drawers

[@brianmason1414]

Kind of going to "you've got mail's" comment. I honestly don't see you getting in someone's else's stuff w/o permission.... anyone that would, should have personal injury inflicted (as the olden days). Between myself and the 2 other techs I work with, 1 of them, we don't touch each other's stuff w/o specific permission each time.... the other, (unwritten rule) get what you need, don't have to ask, just put it back where you found it immediately afterwards, cleaned... GREAT vid as always! Have me ideas for my new cart I'm looking at... :)

[@Eric_Broome]

I wonder if you could talk any louder, my God you can hear your voice echoing in the shop

[@deportallbeaners]

I hate when people make youtube videos of their coworkers box. And instead of letting the coworker explain why the box is set up that way. The youtuber acts like its their own. Also they will slam the drawers and move stuff out of place. Cmon show some respect.

[@flatratemaster]

The other techs, do not want to hang around the shop until 9:30, because of lighting and traffic noise that is when I film these videos, to talk about their tools,

[@Tecalitlan1943]

I am sorry but if I was a tech at your shop, just because I don't stay at the shop till 9:30 PM would not give my "boss" to go through my shit and on top of it film it for a KZbin video unless you specifically asked for permission.

[@flatratemaster]

@@Tecalitlan1943 I always have permission. I would not go into anyone's tool box without there consent, fyi another tech has the keys to my tool boxes if i am out and they need a tool i have that they don't

[@Tecalitlan1943]

That is great you guys have a good working relationship, maybe I was thinking of my obnoxious boss. I was watching your videos while you sent me this email, what an irony....

[@joeframer9642]

YOU GOT MAIL! Easy dbag...

[@jacobstacy588]

I don’t know how work when using your roll cart as a toolbox