HealTech QuickShifter Easy (iQSE) Install on Yamaha FZ1

[@phillipsirmais828]

Had mine for two years now. Not a problem so far and so much fun.

[@AndyManCam]

Thats very good to know. Cheers Philip! No surprises lurking around the corner!

[@Ninja1000sx.]

Hi AMC I fitted one of these last year to my Triumph sprint St, it's preformed flawlessly ever since. One thing I did was set the rpm cut off to its minimum, this allows me to clutchles shift even in light traffic conditions

[@AndyManCam]

Hi Arron. I'm really impressed with it so far too! I found it a little clonky at low revs, but that was without trying to fine tune. Quickshifts in traffic woud be nice!

[@streethawk_1617]

i love this bike ! have it for 7 years now... went from FZ1n to fazer 1000 got a fairing from the US ! look even better... have a full yoshi system with pc5 and a pc QS its a blast on the highway...

[@AndyManCam]

It's an awesome machine. I can see me having mine for the same length of time! No interest in putting all that horrible plastic on it though! ;D

[@streethawk_1617]

doesnt look quite so bad ! have set you pics on your insta page ! check it out !

[@streethawk_1617]

plus help reduce windblast aswell !

[@HepcatHarley]

Recently fitted this to my FJR and without even bothering with the app settings it worked flawlessly :)

[@AndyManCam]

Excellent! I've had it in defaults due to lack of time and it's also been great. I happily stand by Healtech stuff. Great products with awesome support.

[@paulwyand6204]

I like that MGA! I worked on a 59 in high school working on the restoration. We did everything except the body work and the upholstery.

[@AndyManCam]

She's a beaut. I would entertain the idea of seeing if I could do something with it. But the I've met the guy who owns it twice and he looked at me like I fell off of the bottom of his shoe!!

[@philliptapec8670]

After watching it made me fully understand on how to install and set up this device into my yamaha r1 thank you soo much for the time to record this video to help people like me 👍👍👍

[@AndyManCam]

My pleasure, happy to help! Enjoy!!

[@ianlawrie919]

I was confident I could do this procedure myself till you progressed onto the Blue Tooth bit when I spontaneously wept. Great vid Sir

[@AndyManCam]

Haha! It's really not too difficult, honest!! The app takes care of most of it, and I've been using the default settings created by the wizard since the install and it works great!

[@richardbanks725]

Again another brilliant video by you - as well as the rotor I fitted this heal tech gear indicator following your perfect instructions and was dead easy - massive thanks 👍

[@nathanpickett2221]

Just looked up this quickshifter thanks to your video, actually sells for a reasonable price compared to others in the UK. Look forward to the review vid!! 👍

[@AndyManCam]

It is very reasonably priced. And given the features it has and how well it's been working just on default settings, I'd say it's worth it.

[@kumarathomassen5031]

Hey andy man, I fitted one on my fz1N and I used your video and it works perfect and it's realy sick on the road, I love it and I wished I had fitted it sooner. I use your video's a lot and you got a brilliant voice mate. Good luck and I hope to see more of your vids soon.

[@AndyManCam]

Thanks Kumara! It’s an awesome piece of kit, I love mine too! Sure you’ll have plenty of fun with it and I hope the same with the videos!

[@jonathanwrightwright3113]

Never left a comment on anything before , having bought a bike with one on and watching your really brilliant video it has helped me understand everything about it , like I said brilliant , thank you Andy 👍🏻

[@AndyManCam]

Many thanks Jonathan. Very happy to have helped!

[@Blipthethrottle726r]

I know you don’t have this bike anymore but I’ve just bought one and been watching all your videos on it, gonna be coming back to these mod videos as I add stuff to it over time.

[@johnsenkiw430]

Well I must say it was straightforward to install with the help of this video, thank you . Two adjustments on the Bluetooth app and I am doing full throttle no clutch blasts ...unreal !

[@AndyManCam]

Awesome! Yeah it's a great piece of kit and childsplay to set up! Keep on shifting John!

[@johnsenkiw430]

Andy Man Cam Hey there me again . Now you have me thinking about lowering the bars an inch . I’m trying to decide if I should go the SV 650 rise with the stock bars or go all in with Rizoma risers and Rizoma Fatbars . I saw your vid installing your black, wide bars and I thunk you mumbled something about ...was it worth the effort . Thoughts .? John in snowy Denver Colorado USA

[@russelllocke7180]

Very interesting, love the ‘quick’ hands. Let the riding begin AMC.

[@AndyManCam]

Cheers Russel! It's going well so far. Loved it in the UK. Sounds good on the vids too!

[@davrac2008]

what a 1st class video, thank you. im looking for a quick shifter for my 2015 FJR, as i have god used to the quick shifter on my 2021 GSA

[@AndyManCam]

I don't think you could go far wrong with this one. Easily the best bang for buck!

[@Viper6-MotoVlogger]

Apart from the 8mm to 10mm fiasco, that is quite a cool device and easy install. The Bluetooth connectivity is brilliant. Ride safe mate.

[@AndyManCam]

The Bluetooth is a real winner in my book. I hate delving under the seat more than i have to!

[@highlandriders9696]

Looks a great product. Seems simple install too. Looking forward to test ride

[@AndyManCam]

Very simple mate. Surprisingly so. I've got a few tweak tios direct from Healtech so hopefully should soon have it singing on song!

[@supra1102]

Dein Englisch ist extrem gut . Mach weiter so , ich liebe deine Videos

[@AndyManCam]

Vielen Dank! Werde ich machen. Leider ist mein Deutsch nicht so ganz gut! Läuft, aber wackelig und fehlerhaft! :D

[@johnsenkiw430]

Ok ordered one for my FZ ...hopefully the installation goes as easy as yours...stay tuned

[@AndyManCam]

Cool, you’ll love it. Fingers crossed for an easy install!

[@BIG-K]

That is a very neat install and a slick demo, Andy. I hope your eating proves the pud, or something like that. Meanwhile, I wonder if they do one for my SWM..... 👍

[@leduaracosta1569]

Amazing video mate and now I understand much more the app as I didn't have a clue hahaha 👍🏽

[@AndyManCam]

Glad to hear it! Cheers!

[@5valvepete618]

Good tubing man like umall. I've had the same universal tank prop come to hand so many times👍

[@AndyManCam]

Thanks very much Pete. I've got many 'universal' tools! 😜

[@kevmcdevitt8755]

i enjoyed this video, very well done. now i'm ordering one for my zx6r.

[@AndyManCam]

Cheers Kev! Happy quickshifting!

[@exothermal.sprocket]

Finally a motorcyclist that knows how to speak.

[@AndyManCam]

Hahaha! I've been practising since i was little! 😉

[@AndyManCam]

Hahaha! I've been practising since i was little! 😉

[@exothermal.sprocket]

Whatever system you used, it worked. Others be like, "Uuuugh and and and uuuugh and like, this like, that and like, uuuugh ughhhh, now we can go ahead and.....and then go ahead and......and now we're going to go ahead and...... uuuuugh ughhhhhh. And it was like, I was like, and ." xD

[@AndyManCam]

Well thanks for noticing. I try to bring a little bit more eloquence to the field. I also don't see the point in constant cursing. I swear, but you don't need to hear it! Plus my mum watches these videos!

[@exothermal.sprocket]

Exactly. Cussing is no substitute for wit.

[@b_reyo]

What a great video ! Thank you very much for your work man 🙏🏻

[@AndyManCam]

Cheers! Thanks for watching!

[@thelikeablerider8800]

Great install! You have awesome electro wizardry

[@AndyManCam]

Cheers mate! I got it from my mama.

[@reerbaadia1896]

Andy Man Cam My mama only taught me electrolytes from her struggle with weight her whole life.

[@ninjanelly3506]

Looking forward to seeing the results on the road ol chap 👍🏻😎

[@AndyManCam]

So far it's been very good. I've just gotten some tips from the manufacturer, so hopefully will get it shifting perfectly soon!

[@showtime7979]

Glad to see this video was thinking to put one on my suzuki hayabusa you just confirmed it thanks, and you just gain a sub you have great videos 👍🏾

[@AndyManCam]

Thanks Show Time and welcome to the team! I've been loving every minute of having the shifter on the FZ1!

[@stephenmcqueen4029]

You have sold me, I need one of these on my FZ1 soon.

[@AndyManCam]

I can only agree! I love it!

[@AndyManCam]

I can only agree! I love it!

[@motoventure_6938]

Look forward to the test video to see the results and your thoughts mate!

[@AndyManCam]

Me too! So far VERY impressed. Few install changes to be made and then I can get on with it.

[@mattfireblade9136]

It's no FZ1, but here is a full throttle test on a cbr1000rr: kzbin.info/www/bejne/hn3Gc6Gha7N5oas

[@northernninjarunner5506]

If you hadn’t got the gag the beautiful assistant is actually me 🤣 🤣 🤣

[@AndyManCam]

*Disclaimer: 'Beautiful' is a flexible and often inaccurate term.

[@02bigkev]

Well done. Looking forward to the ride vid.

[@AndyManCam]

Cheers kev. Hopefully won't be too long!

[@TheDonInLondon]

Great video as usual love the corrections you added :) really need to get one of these for my new bike! Pleased it works so well...

[@AndyManCam]

Cheers mate. Yeah i didn't want to send anyone up the garden path with bad info! 😄

[@MrBeerscuits]

Great video, I own a FZ1 for about 3 months now, time for some mods hehe

[@luigiemotoblog.7700]

Hello Andy great videos you know i have a fz1 motorcycle and your videos have helped me a lot I liked this because it is encouraging me to put a quickshifter to my bike only I would like you to make a video where you see how it works. Sorry but my English is good and I am using a translator. Cheers.

[@AndyManCam]

Thanks Luis! Well the shifter is installed in every single video since this one, so you can see it working every time I accelerate. Though maybe I should put together another video actually reviewing the function.

[@stuart0604]

Been thinking of getting one for a while....you just made me order one lol hope it works 😲😉👍

[@AndyManCam]

Haha! The mind control is working! I think it's brilliant. And i haven't even started fine tuning the settings yet!

[@stuart0604]

I fitted it the other day its awsome fun, hoping to tune it a bit today although it works pretty good out the box

[@Knighthawk916]

I reckon youre from the planet healtech ;>)

[@AndyManCam]

Wouldn't be a bad planet to be from! All that gadgetry! 😍

[@AndyManCam]

Wouldn't be a bad planet to be from! All that gadgetry! 😍

[@johna6968]

You are an aftermarket add-on God. We're not worthy..

[@AndyManCam]

Haha! Thanks Jay! I'm just doing what i can, one add-on at a time!

[@wookie153]

Looking forward to the test video. Lots of good audio please as I love the way bikes sound going through the box (insert joke here) with a quick shifter fitted.

[@AndyManCam]

You and me both mate! I'll do the best i can. I agree though, i love the sound of a 0.7 second shift!

[@favian3380]

@@AndyManCam test video never came?

[@Picha0098]

Awesome explanation, subscribed!

[@AndyManCam]

Thanks! Happy to be of service!

[@SINIS0RSA]

In the next episode we will see Andy installing a surface to air missile system on his Yamaha fz1n.

[@AndyManCam]

Haha! That would be ideal for the stupid cagers over here that won't let me filter!

[@garthhowe297]

It will be very interesting to see how reliable the shift sensor is in the long run.

[@AndyManCam]

Very true. And that's what I'm here for!

[@sergiosergio471]

Thank you!! yesterday i buy this QuickShifter for my fz1! how is your feeling when you ride with QuickShifter?

[@AndyManCam]

My pleasure, enjoy it! I love the feeling with the quickshifter. Almost like I’m a better rider than I really am! 🤣

[@TK1.3.1.2]

@@AndyManCam hi :)…very helpful clip.thanks for the instructions:). Just received my QS…i was wondering about step 6.the sensor setup. Im on kawasaki z1000.and im in Neutral…i need to go to first gear and then do 3 up shifts?,or its ok to set it up when im in neutral and do 3 upshifts. Thanks :)

[@shergy657]

Great video mate 👍👍

[@AndyManCam]

Cheers very much!

[@stavencapp]

Man how'd you get such a hookup from healtech with only 19k subs. Lucky

[@AndyManCam]

What do you mean ONLY 19k?! Ultimately I know the answer. Healtech like the quality of my videos and how I review the products! Good content wins through!

[@CORUSC4NT]

My english is bad, sorry. Your video is really great, thank's a lot ! I've just one question, the cable on the motor and near the radiator, there's no risk to burn ? Cause it really hot at this place, no ?

[@justastulpe3265]

Hi, does it work for upshift and downshift?

[@AndyManCam]

It does. But there’s no blipper, so downshifts aren’t rev-matched.

[@vishalprajapati8840]

Great video. Thanks for that. Can I ask a side question what handlebar mirrors you have on that bike?

[@AndyManCam]

Thanks! They’re Highsider Ferrara mirrors. Not available anymore i don’t think, but check out www.louis.eu for newer Highsider stuff.

[@vishalprajapati8840]

@@AndyManCam Thanks. I bought some Gazzini also from Louis. Unfortunately they vibrate a lot. Do handlebar mirrors generally vibrate a lot, and how are yours ? :)

[@Gregory_Kousman_8]

Hello my friend I would like to ask you? The quick shifter use in the gearbox for Up&Down or just Up? Thank you

[@comfysofa1549]

Not sure if i missed anything but does this cater for some stuff that needs to stay on? ie a battery backed gps tracker??

[@AndyManCam]

How do you mean? The QuickShifter shouldn’t have anything to do with those. I’m guessing that youtube shunted you on from the Thunderbox video? I guess if something really needs to stay on, you’d have to go direct to the battery. Though if it’s battery backed, this means that you’ll not need to worry about it killing your battery. Don’t most trackers last for months before they need another charge?

[@comfysofa1549]

@@AndyManCam Heh - yes....ironically ive had a healtech qs for years on my hypermotard....so yes it was in relation to the other video - my apologies...

[@trykozmaksym]

That's a mouth-watering piece of engineering... But how does that sensor work? I thought it's some kind of piezoelectric... but the way it's mounted - is there some crazy accelerometer/gyro inside?

[@trykozmaksym]

Is it possible to disable quickshifting between 1st and 2nd ?

[@AndyManCam]

I'm honestly not too sure. I think it deals with compression, or lack thereof. So how much it's being squeezed. I don't think you can disable shifts between 1 and 2. Only below a certain rev range. Though I've found even shifts between the first 2 gears to be far better than expected.

[@trykozmaksym]

That thing must be very sensitive because the compression probably changes very little - because of the splines. Have you had any "misfires"? How consistent is the shifting?

[@rohitnarayan3966]

Nice video! Let say you don’t want to use the quick shifter, can you use the clutch to shift with out installed jumper?

[@AndyManCam]

Thanks! Yes you can use the clutch completely as normal.

[@fabiomarzulli4257]

What are the best setting you ended up to use on the quickshifter for your Fz1? I'm gonna fit an Healtech on mine as well. Thanks for your help... Lamps

[@AndyManCam]

TBH, i just left everything on the default Settings, and it seemed to work perfectly.

[@dom_petrolhead9165]

Hey man nice video. Im just thinking my bike need the same upgrade. So my question is it still working? How is your feedback after 2 years?

[@AndyManCam]

It was working flawlessly right up until when I sold the bike about a month ago.

[@fibroboy1604]

Just about to stick one on my R1 this week.

[@AndyManCam]

Very nice. Even without fiddling, it sticks a fat grin on my face every time!

[@fibroboy1604]

Andy Man Cam I have one on my r6 track bike and it’s so much fun on track. Not sure I’m any faster right enough 😂

[@Silbermorfar71]

Hi Andy Man, i know you don't have the FZ1 anymore, but i saw the vid, class one and want to hear you, if there was any problems with the QS anytime? I want to buy one too for my FZ, but had some big issues with my Blackbird, so just wanna get some input 😊 Keep up the good work, greetings from Denmark👋🏼👋🏼

[@AndyManCam]

Hi Andreas. The only issue i had was that I cracked the sensor by tightening it too much when i adjusted the gear lever later on. It would sometimes do strange things when it was really wet. But Healtech very quickly diagnosed the problem and sent me a replacement shift sensor. Otherwise, all smooth sailing!

[@johnmangsx]

Hey man awesome job! Where did you get the little carbon front fender extension

[@AndyManCam]

Thankd John! It was from ebay. A little company in Spain I think. Cactus composites or something like that.

[@ced67660]

hello nice job , i have the same bike , is it possible to have your settings ? thank you

[@AndyManCam]

Cheers! Thats easy. I left everything on default!

[@folerx]

why you mount sensor on arm and not on rod?

[@AndyManCam]

Because that’s what the instructions say to do.

[@Henka-mxpartsse]

Thanks for a great video! Where did you buy your winscreen? I just bought myself the same bike.

[@AndyManCam]

Many thanks! I got it from www.louis.com although i find it quite noisy.

[@Wave1dave]

Hi Henrik, I am thinking about buying one for my FZ6. I know Andy didn't like it that much because of the wind noise, I want to get it on my bike mainly to protect all the gadgets mounted on the bars. Do you find it loud and annoying as well?

[@Henka-mxpartsse]

Hi! I did not buy a windscreen yet for my bike yet :) maybe latee this summer after ived recieved my license 😅

[@Wave1dave]

Guess I'll take the risk then. Thanks and ride safe!

[@Henka-mxpartsse]

The same to you! Ride hard but safe!

[@nathr2012]

Did you ever make a video testing this out and playing with the settings?!

[@AndyManCam]

Not yet, but even if I have to do it in driving snow, I’ll have a video finished before christmas!!

[@nathr2012]

Andy Man Cam excellent news I look forward to it!

[@2WheelsSometimes1]

Thank you very much mate! I just came upon your channel as I am looking to get a Healtech Easy QS too for my MV Agusta F4, which will use the same setup for the sensor as yours. Liked your video, you got a subscriber here for sure. Looking forward to hopefully a great review of it.

[@AndyManCam]

Thank you Twowheelshredder! Glad to have you on board mate! Nice bike btw! I bet you’re watching the 44 Teeth BBBI with rigid anticipation!?!

[@2WheelsSometimes1]

With great anticipation!!! Don't get me wrong, I am actually a big fan of the 999 styling, but... It's still not an MV.

[@JDRides]

I have a doubt and i would greatly appreciate if you could clear this for me as its kinda eating my brain. i have a 2016 MT09 and I am getting a PC5 since I have got an M4 and a K&N installed. I have also ordered the healtech Qs that you installed. will they work together without causing any issues? should I go for the dynojet qs instead?

[@AndyManCam]

I'm afraid I don'T know for sure. If they use the same connections, then you'll likely have problems. I'm pretty sure that the PC5 has pass through connections for extra accessories, but I doubt if they've allowed for other brand stuff to work with tis feature. Maybe an email to Healtech would clear things up. They're usually very knowledgeable and extremely helpful.

[@JDRides]

@@AndyManCam I shall do that. Thank you buddy

[@AndyManCam]

Hope you get some good answers.

[@gatito339]

great video made,thank you.

[@AndyManCam]

Thank you too! Glad it was helpful!

[@Greeny092]

Andy do you rate it, is it something you will add to all your bikes

[@AndyManCam]

Definitely. I simply didn't fit one to my Honda CB1000R because I was waiting for the warranty period to be up (and then sold the bike!). With the KTM i just didn'T have the time, was about to get one and fit it and some kind soul decided to run in to me in town. Now my replacement bike already has a factory quick shifter fitted. Otherwise, I really rate this quickshifter very highly!

[@pineapplejelly1005]

How do downshifts work with this?? Can you clutchless downshift because it blips for you or do you need to blip yourself??

[@AndyManCam]

You have to blip for yourself I'm afraid. The bike really needs to have a ride by wire system to allow for a blipper.

[@nac5000]

so you can configure to always have this enabled and you will never used the clutch just on full stops right?

[@AndyManCam]

You can, but it gets very lumpy and clunky at lower revs.

[@bikersquest]

The coils on this bike are real tough to get to, I had to remove some to diagnose a misfire and man was it tough with seized in caps.

[@AndyManCam]

I guess spinning them round to plug in a connector and removing them altogether are two very different things! I imagine that would be a bit of a pain in the bottom.

[@helderneves91]

Hi, It's bi-directional? (downshift-upshift)

[@AndyManCam]

It is, but there is no blipper, so the downshifts are quite clunky.

[@helderneves91]

@@AndyManCam Thank you!:)

[@AndyManCam]

My pleasure!

[@helderneves91]

@@AndyManCam I'm trying to find a solution for a quick shifter, but would like to have bi-directional, otherwise, to me, doesn't justify the investment. Btw, bought a fz1 2009, what a beast :D

[@AndyManCam]

That’s very complicated as you’d need one with a blipper. Sadly a blipper is pretty much impossible without a fly by wire throttle. TBH I’ve never missed downshifting and i even didn’t use it when I’ve ridden bikes with that feature. I prefer to blip the throttle myself!

[@SantaridesaKTM]

Great Video.

[@AndyManCam]

Thanks very much Mr. W!

[@christophergothard7277]

Look forward to seeing how well it functions soon. Nice install vid though!

[@AndyManCam]

Thanks very much Christopher! It was a pretty straightforward job TBH, given how complicated and hi-tech the product is! Plug in and GO!

[@cornish_boy6235]

Have been waiting for this, do you think healtech will do any discount if we quote you?

[@AndyManCam]

I don't know. I can certainly ask!

[@TheKiller6364]

Did you have to make any changes afterwards or are the adaptive (automatic) settings fine?

[@AndyManCam]

I have had everything on the default settings (adaptive) for the whole time and it works just great!

[@TheKiller6364]

@@AndyManCam Ok sounds great, thanks for your reply!

[@习近平-m5l]

Help, my sense value is always too low I uninstalled the sensor, and squeeze it out really hard, I only get 19% of sense value, I didn't install it too tight. I didn't run the set up at the beginning, is that what causes the problem?

[@AndyManCam]

I'm afraid I'm not the expert. Contact Healtech and I'm sure they'll help you out.

[@JustinAdams-v9k]

So if 4 cylinder, it doesn't matter which coil the red/white wire set connects to?

[@simuppal2439]

Hello Andy hope you are doing well i bought an used fz1 N 2008 and it has quickshifter on it from healtech but i connect bluetooth app on it what should i do to make it work it is connected and it shows red light when the ignition is on but doesn't shows green light.

[@Cichymoto]

Can you specify your iQSE settings?

[@AndyManCam]

At the moment, everything is on default, with my sensor threshold at 70% I'll be getting into it in more detail soon though.

[@Ya-8OY-Tim]

Would this near enough be the Same for the fz6?

[@droneshotsetc572]

Where did you get the carbon fiber radiator side covers. I cannot find any to replace mine that are destroyed.

[@AndyManCam]

It was from F&F Carbon. Here's the video ;D kzbin.info/www/bejne/b17JkoygpM-Cjbc

[@BMRTV]

Who's BMW Airhead is that? Andy Man Cam explores?

[@AndyManCam]

Sadly not. Thats the guy i share the garage space with.

[@Diego87]

si la moto es de 1 cilindro (ejemplo ktm rc 200 o 390), ¿qué se hace con el segundo conector de inyector, se pone el plug que viene para taparlo, se deja libre, qué se hace?

[@pra089]

Hi, you know how to disable downshift cutoff? Its annoying.

[@AndyManCam]

Hi Martin. Oddly enough, i do! And I’m going to make a video of how to do it, very soon.

[@pra089]

@@AndyManCam That is great, do you have instructions from healtech? I buyied QS last week and I am thinking to return it if disabling of the downshifts cannot be solved normaly. I wrote today to healtech support I will see.

[@bonabry65]

I bought a 2020 GSXs 1000 from a private party … he had installed the Healtech QS. Although the QS works great when engaged, there are times when after I stop and cut power to the bike, the unit does not engage and connect to Bluetooth once I start the bike back up causing the QS not to work. Can anyone explain?

[@predragsim6356]

can it change gears down or only up?

[@AndyManCam]

It can change down and up, but doesn’t blip the throttle, so downshifts will be a bit jerky and probably not great for the gearbox.

[@nemindakarunaratne2291]

Thanks a heap for that

[@AndyManCam]

My pleasure! Happy to help!

[@johnhomles2711]

One thing I wondering if u set a quick ie 7000rpm dose the quick shift still work if revs go past or lower rpm .as it's hard to check rpm when rideing ?

[@AndyManCam]

The RPM setting is a cutoff. So it will not work below those RPM but will work above. I have mine set at 3000rpm, so it will not work from 0-2999rpm, but anywhere from 3000 - redline, the shifter will operate as normal. I've never really had to check the revs as you just get a feel for where the shifter cuts in.

[@johnhomles2711]

@@AndyManCam top man andy I better get on orderd

[@AndyManCam]

No problem! Have fun with it!

[@johnhomles2711]

@@AndyManCam 🙂

[@wiley5oh51]

Does it have to be full throttle for the quick shifter to work?

[@AndyManCam]

No, not at all. As long as you're accelerating, it will work. Obviously the harder you're accelerating, the better it works. 😜

[@MrBenoJacko]

Did you do a testing video? Cant find it anywhere!?!?!?!

[@AndyManCam]

No, sadly not yet. Though it’s still on the bike so I’ve been ‚testing‘ in every video since! 😜

[@gregparkes8089]

Hi andy, just a quick one I’ve just bought one of these for my R6 and just want to know does it do down shifts? I know it won’t blip but does it do the ignition cut?... also how did you find out the best kill time settings?

[@AndyManCam]

Hi Greg. If your shifter rod is in the right orientation (push or pull, I can't remember) then it will cut the ignition for downshifts but, as you say, it won't blip. This means it doesn't make for the cleanest downshifts and I have found that sometimes it actually kills the ignition at the exact moment I've wanted to blip the throttle. You can install it so that this doesn't happen, and I'll be doing that as soon as it's warm in my garage!! TBH with regards to the settings, I still have everything on adaptive and defaults!! Seems like the best place to start! But the App gives you tips on what each setting does and also what changing the setting will affect.

[@gregparkes8089]

Andy thanks for the response... just a last one how do you install it to stop it doin it? Because I’ve seen loads of places that you can put the sensor... FYI I have standard shift in place

[@gregparkes8089]

Andy.... when you plugged the piggy back plugs in is their an order in which they should go? Like are they numbered? Also the 2 plugs with the red marker on do they both plug into the same coil pack or do you split them between 2 coil packs? Or and lastly does the red marked ones have a specific coil to go on? Thanks.

[@AndyManCam]

As far as I remember, they’re not numbered but they are paired. So each pair has to go to the same cylinder. The marked plugs are important but I forget why. I mentioned in the video somewhere!

[@davidhall370]

When are you changing the frame , wheels and engine ?

[@AndyManCam]

As soon as i find carbon ones that i can afford! 😂

[@aleks_the_Great13]

Is this working on up and down shifts?

[@AndyManCam]

Yes, although it doesn’t have a blipper so the downshifts can be a bit clumsy.

[@jamob33]

One question, what is if i shift with the clutch an the quickshift is mounted ?

[@AndyManCam]

Hab ja schon direkt geantwortet, aber für das gemeinsames Publikum: Works completely normally with the clutch. Sometimes during downshifting, the ignition can be cut just as you blip the throttle. Happened to me a little bit, but I've since learned to 'ride around it'. You can actually turn off the downshift behaviour completely, but for this you have to mount the shifter sensor slightly differently and turn off some settings through the Smartphone App.

[@mietekphc9847]

How does the quickshifter work for half a year? All good?

[@AndyManCam]

It’s still working really well. It stopped working in heavy rain in the Schwarzwald in the summer, but soon started working again. More review vids soon to come.

[@lillnemo1]

@@AndyManCam nice vid and install!!! Do you know why it stopped working?

[@AndyManCam]

After speaking with Healtech, it's possible that I've overtightened it and the sensor has cracked. So once the water got in it stopped, but then when it was dry again it started working again.

[@seyirdefteri7842]

is this QS up/down..?

[@AndyManCam]

It is, but there is no blipper. So the down shifting can be VERY lumpy!

[@SR-cp1eo]

Just so you know, You helped me install this a few days ago. I had a few questions regarding the sensor mounting, watched your video, saw it worked for you, and turns out it worked for me. I did have an issue with it not sensing pressure and ended up shifting a few gears pretty hard without an ignition cut. I played with the sensor pressure settings and ended up setting it to 70%. (it was at 60%). So far, it seems to work since the change, but curious if you've had an issue of yours quitting on you mid-ride?

[@AndyManCam]

Very happy to help Sean! I’ve only ever had an issue after washing the bike, but it turns out I‘d overtightened the sensor and cracked the plastic so it was letting water in. Switched the sensor and all was great after that.

[@SR-cp1eo]

@@AndyManCam Right on. I tightened the sensor till it didn't wiggle anymore, then did a quarter turn after. Seems to work fine. I think the issue is my foot placement. when I shift normally it's fine, but sometimes my foot placement is slightly off and it won't set off the sensor. I learned that foot placement matters haha! I did a few power shifts that were quite uncomfortable... So far works great! Just rider error. Thanks again!

[@AndyManCam]

Good stuff. Yeah I’ve learned that quite often shift problems are more me than the bike!!

[@Waleed.alhamidi]

Will it affect the gearbox in the long run?

[@AndyManCam]

Impossible to say really. The shifts on the whole are very smooth and so I don't think it could have too much effect. Don't forget as well though, that any extra wear on the gearbox is saved by the reduced wear on the clutch and associated attachments!

[@Waleed.alhamidi]

Andy Man Cam ✅👍

[@kyleAsmith19]

How does it work between 1st to 2nd. With neutral inbetween, i wonder how it would react.

[@AndyManCam]

As long as you're direct and firm, it's surprisingly good! If you tickle it, you can hit a neutral. But shift with intent and it goes in every time.

[@BikenutGB]

@@AndyManCam That's what she said

[@knokcs]

at the very end, this stuff work?? no test of this installation?

[@AndyManCam]

This is an installation video. Says so in the title. 🙄. Lots of usage in riding videos after this though. And #SpoilerAlert, it works very well and I love it very much.

[@robsonITALY85]

gruß aus Bremen🖐

[@AndyManCam]

Moin!

[@steveshaus5710]

Hi, my sensor threshold is set to 70% is this normal?

[@AndyManCam]

I’m afraid i couldn’t tell you. I left everything as it came out of the box or switched to auto. Contact Healtech for a real experts input 👍🏻

[@steve0680657]

Good video. But i found the music throughout a bit distracting. Also you will make more money with a shorter amc intro section. I tend to skip long introductions which i believe could mean KZbin discount it as an extra view (due to parts being skipped)

[@AndyManCam]

Thanks. I'm not sure that 12 seconds is too long for an intro. Not by much anyway! I know what you're getting at though.