Thanks for showing us the mistakes too. You watch all these videos and when you mess everything up the first time you try, and you watch all of these perfect videos (which I know they don’t always go perfect “, you start to feel like you can’t do anything right! In reality, it does take some mistakes to perfect these things! I have lightened up a lot! I appreciate your videos, a lot!
@AngieHolden Жыл бұрын
Thanks for watching!
@BigSister562 жыл бұрын
Angie when will they be bring out a new mug press that does more than just mugs
@AngieHolden2 жыл бұрын
I seriously have no idea if that is even going to happen?
@sheilawiard20772 жыл бұрын
Thank you for finding a solution to be able to due different sizes of blanks in the mug press. I think Cricut missed the bar by making this heat press for only certain height blanks. I would love to see them make a larger press to do the full tumbler without having to turn it over. Moving forward with this method, I will certainly follow your instructions!!
@AngieHolden2 жыл бұрын
I would definitely love a taller press from them!
@maryjanewill30562 жыл бұрын
Great video, 👍
@jocelynjones2035 Жыл бұрын
Finally I've found what's wrong. I've gone through 7 tumblers and they all have those watermarks and I couldn't figure out where it was coming from. I'm doing sublimation and the mats and every single tumbler has come out with those marks
@carolpratte172 жыл бұрын
Thank you!! I followed your process and my skinny tumblers turned out amazing!!! I'm so excited to finally know how to make beautiful tumblers using my Cricut Mug Press.
@AngieHolden2 жыл бұрын
YAY!! So happy to hear that!!
@mandylevasseur38072 жыл бұрын
I honestly don’t know what I would do without your videos. 🥰 your a true crafting guru
@AngieHolden2 жыл бұрын
Thank you!
@mariangurney9777 ай бұрын
Thanks for this video. Just starting out with sublimation. I'm doing my first tumblers this weekend. Question, when you did the 2nd pass at the tumbler and taped the image inside the tumbler, did you add protective paper inside to prevent bleeding into the mug press? Thanks
@AngieHolden7 ай бұрын
I am not sure what this references but anything inside wouldn't bleed out to the mug press sides.
@mrsdizi12348 күн бұрын
Can you use a shrink wrap on this? Thanks Angie for all you knowledge.
@AngieHolden7 күн бұрын
No need for shrink wrap with a mug press!
@brendalawrence67322 жыл бұрын
I love that watermelon print, so cute! This was such an informative video Angie. As always you show everything and explain everything so well. Thanks for that! Hugs, Brenda
@AngieHolden2 жыл бұрын
Thanks so much! 😊
@melbradley6762 жыл бұрын
Just thought I would say I have used a silicone baking mat cut up and put around in layers to close the gaps for the skinny tumblers and/or anything else that is too small for sublimation with printed infusible ink. It worked just fine. Maybe test that out on a video sometime to see if you get good results as well.
@Aukena2 жыл бұрын
I was just wondering about that
@lucypagan39695 ай бұрын
I love the watermelon look Is there a certain press that you can make several sizes or would I have to purchase a mug press and a tumbler press sorry I am a newbie to all this. Thank you
@AngieHolden5 ай бұрын
Yep I would try this press: kzbin.info/www/bejne/sJ-QmX2AhZpnq6M
@carynclark386810 ай бұрын
Loved your video but have a question. Using infusible ink transfers on a stainles steel tumbler do you have to use a longer time for it. I tried and it didn't hardly show. I was using the inserts which are great. Help please
@AngieHolden10 ай бұрын
With this press, it is sometimes tough to dial in how much time you need. You may need more depending on the blank.
@kristinehowe781110 ай бұрын
I was wondering if you were able to figure out a way to stop the moisture issue when using infusible transfer sheets?
@AngieHolden10 ай бұрын
I wasn't. These pads seem to hold a ton of moisture.
@melissahanson60032 жыл бұрын
Thank you! I have been looking for a hack for my Cricut Mug Press with skinny tumblers!
@CherylFoster522 жыл бұрын
This is great ❤ I use my silicone mat that I order for my epoxy it came with two mats so I use one for my tumblers.and I figure out a few more great tips. I use a metal stirrer to lay down on the bottom plate
@rosalindalozano2332 жыл бұрын
Please explain the metal stirrer 🙏
@CherylFoster522 жыл бұрын
@@rosalindalozano233 I place the metal stirrer on the bottom of the metal plate it keep your tumbler from going all the down to the bottom, it help you also got a even press for the top of your tumbler
@AngieHolden2 жыл бұрын
Interesting! I was fine just picking mine up a bit and closing the press.
@CherylFoster522 жыл бұрын
@@AngieHolden yes I do mines like that sometimes but I forgot one time so that's how I came across doing like that, I learn so much from you
@AngieHolden2 жыл бұрын
Awe! Thanks!
@lynnkaufman9006 Жыл бұрын
could you use shrink wraps to hold the sublimation paper in place?
@AngieHolden Жыл бұрын
I would not. It will likely melt in a press like this.
@rosalindalozano2332 жыл бұрын
Glass works as long as you heat the glass before you sublimated. I fill with warm water for a few minutes and dry thoroughly) I've had no problems.
@AngieHolden2 жыл бұрын
I have just decided not to recommend it as there have been several issues.
@anngillespie2677 Жыл бұрын
What if the inserts were heated with a press before it goes in the mug press? Would that help get rid of the moisture?
@AngieHolden Жыл бұрын
Not sure! It didn't seem to make a difference when I was making several in a row.
@SunshineEdma Жыл бұрын
I'm sorry. what is the purpose of rotating the tumbler?
@AngieHolden Жыл бұрын
The area that is intended for the handle will not sublimate.
@carolyncoleman19626 ай бұрын
Do you think the infusible ink would work better/ avoid marks if the inserts were preheated in the mug press before adding the tumbler? I don’t have a sublimation printer…
@AngieHolden6 ай бұрын
I have found that the inserts hold moisture regardless.
@carolyncoleman19626 ай бұрын
@@AngieHolden ok, thank you!
@cesiahernandeznava2892 Жыл бұрын
Why do you use protective paper? What happens if you don't use it?
@AngieHolden Жыл бұрын
You run the risk of getting ink on the inside of your press.
@elizabethb25032 жыл бұрын
I was REALLY rooting for the camp mug!!😭 I want those so bad. Excellent tutorial. I haven't seen the mug press IRL, but it looks like a button on the bottom where the mug sits, so upside down, it would go around that & lower in the machine missing full heat. Never thought about it before seeing this. Thank you!!
@AngieHolden2 жыл бұрын
Correct! That is exactly what happens! I wanted to try it with it all the way down just to test but definitely picking up works better!
@jerriling40832 жыл бұрын
Would using a silicone tumbler sleeve possibly work instead of the inserts?
@AngieHolden2 жыл бұрын
I actually JUST saw these yesterday. I am not sure!
@cryavi2005 Жыл бұрын
Hello! Can you print on sublimation paper using an inkjet printer? Or does it have to be a sublimation printer ink? To be able to use it on your mug? I hope i make sense. Thank you
@AngieHolden Жыл бұрын
You have to have sublimation ink in a printer.
@cryavi2005 Жыл бұрын
@@AngieHolden ok thank you
@gerryannbrown96452 жыл бұрын
Thanks, Angie, Great solutions for them using different size items. Have a great day!
@1111joey10 ай бұрын
What’s the biggest Tumblr that will fit in the machine
@AngieHolden10 ай бұрын
I have a video here with more: kzbin.info/www/bejne/jKmQoGaBndlolbM
@winterstar4813 Жыл бұрын
you are so awesome wow
@JanineMKartist9 ай бұрын
does the fluted lattes mugs work in the mug press?
@AngieHolden9 ай бұрын
no it does need straight sides.
@GayleDoesDIY Жыл бұрын
Thanks for explaining those imperfections, I was wondering why I got those warped bubbles when I use the insert with infusible ink sheets
@bessiegoldsmith92102 жыл бұрын
Have you ever tried acid etching on glass tumblers instead of sublimation.
@AngieHolden2 жыл бұрын
Try this: kzbin.info/www/bejne/eaa0mGOEaqyGmLc
@tracicrain2161 Жыл бұрын
What do you use to print your sublimation inserts?
@AngieHolden Жыл бұрын
I have a variety of sublimation printers. You can see more here: kzbin.info/www/bejne/rn2qmI2geNx8a7s
@dnecey322 жыл бұрын
I have made several skinny 20oz tumblers in my cricut mug press but I don’t use anything on it like a wrap the wall isn’t even touching the tumbler and it comes out perfect I do 3 minutes on one side turn it then flip it and do the same thing
@AngieHolden2 жыл бұрын
I never have good luck like that!
@dnecey322 жыл бұрын
@@AngieHolden it took me a few tries but I think it was because I didn’t have it taped right enough I didn’t steer out doing it this way my friend does it this way and they come out perfect idk how but they do lol
@lindakent58532 жыл бұрын
Great video. Would you suggest getting 2 sets of inserts and swap them out instead of using the same one?
@AngieHolden2 жыл бұрын
I guess you could as they do get really hot.
@tobitaruiz5963 Жыл бұрын
Hoping Circut comes out with an option to press tumblers because for the price it is my opinion that the process should be less complicated when using the mug press.
@starrspoter Жыл бұрын
why do u have to rotate it? dosent it do the hole bottom in one go? on both sides?
@AngieHolden Жыл бұрын
There is a gap in the front when you close it. It is for the handle of the mug. In this case, we want to do a full wrap so we would need to rotate to sublimate that strip.
@ShelleyCordes Жыл бұрын
Thanks for the insert link for the skinny mugs! I am a new member. Can't wait for more videos. Thanks😁
@jlc1023 Жыл бұрын
Hi! Thanks for the video! Can I ask where you got those shelves in the background? I'm looking for cricut/printer storage like this. TIA!!!
@AngieHolden Жыл бұрын
Try this: kzbin.info/www/bejne/oYjEhnxml8t7psk
@raenicole95192 жыл бұрын
I was hoping you would do a video on this and you did not disappoint! Thank you!!!!!
@AngieHolden2 жыл бұрын
You are very welcome!
@ritawhite5962 жыл бұрын
Thank you for this simple fix. Can't wait to try
@whitetwilightph Жыл бұрын
Hi! I would simply like to ask if your Cricut mug machine emits smoke during heat pressing?
@AngieHolden Жыл бұрын
Generally no. However, it can emit moisture or steam depending on what you are pressing and these inserts do have quite a bit of moisture.
@herendiralife Жыл бұрын
Hello, I have a question. I already made two 20oz tumblers. I left the first one a minute more on each side, after the first side is made by the mug and it burned in the middle part. I tried it again but now only one minute instead of two as you indicated but the one-sided design burned very little. What could it be ? If I do what you do Thanks in advance
@AngieHolden Жыл бұрын
I haven't had issues and I know many others have used these same steps without issue. Maybe your tumblers are different?
@MiniMeags Жыл бұрын
I had no idea the mug press didnt automatically tighten to the pressure needed Thank you so much
@cathypeacock49162 жыл бұрын
You would think that Circuit would come out with taller one ..save time of turning it upside down….
@barbmcconville2741 Жыл бұрын
I judged wanted to thank you and mr crafty pants about doing tumblers in the Cricut mug press. Turned out FABULOUS, small issue with seam, totally my fault. Infusible marker and heat gun fixed it THANK YOU THANK YOU THANK YOU!!!!
@AngieHolden Жыл бұрын
Happy to help!
@brittanyyoung77152 жыл бұрын
I LITERALLY asked this question on Facebook and looked for a video about this YESTERDAY. You truly are my favorite and thank you for listening to the crafting Gods because I needed this
@AngieHolden2 жыл бұрын
I have been trying for what seems like FOREVER but I think I am finally happy with this!
@Rayansway2015 Жыл бұрын
I only just came across your channel, but I like how thorough you are in explaining things clearly. Definitely subscribing.
@auntienikkisgamin92512 жыл бұрын
Great video I really haven't used my mug press since Xmas so I'm willing to try and signed up for the class
@AngieHolden2 жыл бұрын
Yay! So glad!
@kpluse Жыл бұрын
If I don't have a sublimation printer, could I use a full-size infusible ink page for a design (just not as fancy)?
@AngieHolden Жыл бұрын
Yes you can.
@tashanadaley22242 жыл бұрын
So I tried it and it worked. However I did notice the water mark when using the infusable ink as you stated. You truly are a 💎
@aliciabliss1220 Жыл бұрын
Do you have a video showing how you printed your sublimation prints for the 20o tumbler? Currently struggling with this.
@AngieHolden Жыл бұрын
Try this: kzbin.info/www/bejne/oZfQq6WCo8ians0
@amandasmolinsky2246 Жыл бұрын
To fix your seam you need to cut the excess white from your sheet before wrapping
@loiseubank77495 ай бұрын
Is it possible to pair 2 cricut mug presses to cds and use at the same time?
@AngieHolden4 ай бұрын
Yep. All you do is register them on Design Space so you can use as many as you would like.
@loiseubank77494 ай бұрын
@@AngieHolden thank you!
@Ladidalady2 жыл бұрын
Help please! My tumbler starting smoking about half way through. Is that the silicone mat (new) or maybe the tumbler itself? Is that normal? Is it ok? Thanks!
@AngieHolden2 жыл бұрын
Yep. It is moisture from the wrap. I don't know why but they seem to do that every time.
@tamzynkitto7107 Жыл бұрын
Hi, I love your channel and have had great projects with your tutorials :) Where you had issues with the whole sheet of infusible ink and the moisture marks, do you think smaller images that were weeded and cut out then taped onto the skinny tumbler would work better? Thankyou x
@AngieHolden Жыл бұрын
Yes I think smaller images would be better!
@raenicole95192 жыл бұрын
What measurement (template size) did you use for the skinny tumbler?
@AngieHolden2 жыл бұрын
I downloaded that watermelon file from Creative Fabrica and it was already the right size. I just printed it!
@angelquade2590 Жыл бұрын
Just an FYI, saw another video where they tried infusible ink on tumbler, flipping it like you in Cricut Mug Press and it did the same as yours. They think the heat reheats the infusible ink when flipped and fades it and makes those markings.
@AngieHolden Жыл бұрын
Something DEFINITELY happens with the Infusible Ink that is different.
@Lzamora12 жыл бұрын
Thank you so much for these informative videos. Straight to the point and easy to follow along. I’ve learned so much from your videos.
@AngieHolden2 жыл бұрын
Happy to help!
@carriejeanne30382 жыл бұрын
This video couldn’t be better timed, I purchased some 20 oz skinny tumblers and then realized they’re too small for my Cricut mug press. Placed an order for the inserts, can’t wait for them to get here so I can get started. Thanks, Angie!
@AngieHolden2 жыл бұрын
Yay! Happy to help!
@thelastwin Жыл бұрын
Great info! Ordered the inserts from your link! Also subscribed😊Thank you
@AngieHolden Жыл бұрын
Thanks for watching!
@krubiog25052 жыл бұрын
hi i love your videos!! very helpful although I have a issue, i have purchased many brands on 20oz straight tumblers and in all of them the paper gets stuck on the tumbler really bad, i cant even peel the paper off. I see on your video the paper comer right off, what am i doing wrong??? have tried this so so many times with less time, more time and all my results are the same, hope you can help me, Thanks
@AngieHolden2 жыл бұрын
I have never had that issue on a 20 oz tumbler. You can get the paper wet to get it off.
@robertkahovec3451 Жыл бұрын
I just used on the 20 oz. And it was fine !! Just a little fading at the top so will hold up a bit when I close. Thanks for the tips.
@AngieHolden Жыл бұрын
Good stuff!
@cathydownes87578 ай бұрын
I am going to try these inserts with stitched neoprene stubby coolers....fingers are crossed, I use an insert in them as well
@AngieHolden8 ай бұрын
I haven't had any luck with that!
@mysmallworldnosjox2 жыл бұрын
when i I turned it on not working and it gives me this notification "Connect machine Machine Deactivated This machine is not in working order. If you think you're getting this message in error, contact Member Care.
@AngieHolden2 жыл бұрын
I would contact member care.
@loiseubank77494 ай бұрын
Awesome, thank you
@AngieHolden4 ай бұрын
You're welcome!
@angellasky32972 жыл бұрын
There’s a really pricey. Will the cheaper ones work? I seen some on Amazon for $17.99
@AngieHolden2 жыл бұрын
Sorry not sure.
@pattibaileydesigns2 жыл бұрын
Great video Angie! Thanks for finding a product that creates that tight fit we need. You mentioned that when you flip the skinny tumbler, you should lift it slight off the bottom of the press. Shouldn't you do that for both the top and the bottom so neither end touches the bottom? If not, can you explain why? Thanks so much and again, great video - as always! :)
@AngieHolden2 жыл бұрын
It is fine to touch the bottom plate. However, when you flip it, the tumbler is open and will NOT touch the bottom plate but instead go around it. So it actually goes in LOWER than the tumbler inserted with the bottom side down.
@pattibaileydesigns2 жыл бұрын
@@AngieHolden That makes sense! There have been other videos out there saying to lift it but never explained why.
@notimetowork Жыл бұрын
You're amazing, you always have such great ideas!
@chrislee6076 Жыл бұрын
Thank you for this! I just asked for this on a different video of yours!
@RainorShine1 Жыл бұрын
Walh makes a horizontal auto press wonder if that would be better for 20oz tumblers
@AngieHolden Жыл бұрын
Not sure!
@kathrynwiford8742 жыл бұрын
Ordered the wraps, followed all your instructions precisely, and I LOVE MY NEW TUMBLER!!!! THANK YOU!!!! LOVE LOVE LOVE all your videos and hard work! Question . . . How do you print a full tumble wrap thru Design Scape? I had to print twice and tape.
@AngieHolden2 жыл бұрын
I don't use Design Space to print. I have a video coming up with some other free options!
@sylviathomas7482 Жыл бұрын
You are Awesome 👏 👏👏Thank you for helping me to understand all of this❣️
@AngieHolden Жыл бұрын
Happy to help!
@bkbrp642 жыл бұрын
Great information! Question, though. Are you suggesting ONLY using sublimation prints and not the infusible ink? I don't have a sublimation printer unfortunately and it's not in the budget at this time. Can you buy pre-printed sublimation sheets by any chance? Also, on your camp for May 12-14...I'd like to join, but have to work. Can I watch later, or do I have to purchase the All Access Pass to watch later? Thanks!!
@AngieHolden2 жыл бұрын
You can buy pre-printed sublimation sheets and those may work better! I didn't have any luck with Infusible Ink and wanted to be honest about that. If you can't watch during the camp days, you do need an All-Access pass to get extended access.
@lollybaezcolon71902 жыл бұрын
I follow someone that never uses inserts and the heat alone works amazing!
@AngieHolden2 жыл бұрын
I haven't had success without the pressure.
@karlamarion307 Жыл бұрын
What size paper do you use
@AngieHolden Жыл бұрын
Most of the time 8 1/2 x 11 but I can print on 8 1/2 x 14.
@Bitsandpeices2 жыл бұрын
Thanks for sharing a well taught video 😊
@AngieHolden2 жыл бұрын
My pleasure 😊
@lisamoody3132 жыл бұрын
Does the protective paper you use work the same as the butcher paper that they recommended for the heat press in the Sublimation Camp?
@AngieHolden2 жыл бұрын
Try this: kzbin.info/www/bejne/sKOog5Zjbretfac
@jrhodes32162 жыл бұрын
Angie… I have been so afraid to press anything other than Cricut mugs in mine because I saw a couple instances where people had done “non-approved” items and it somehow “bricked” their press and it became unusable. Do you know if this is true and if so, do we know what causes this to happen?
@AngieHolden2 жыл бұрын
Try this: kzbin.info/www/bejne/lZ3FnaFoarF0hKs
@sherilewis1058 Жыл бұрын
Thank you so much for this video!! I feel so much more confident in making a full wrap tumbler ☺️!!
@AngieHolden Жыл бұрын
Thank you so much!
@jennalmonte82902 жыл бұрын
Am loving this. Could you shrink wrap to ensure no ghosting happens? I won’t get my sleeves until Wednesday- cannot wait to try!
@AngieHolden2 жыл бұрын
There really isn't any reason to shrink wrap if using this method. Shrink wrapping is to apply pressure when using a convection oven.
@joannamatamoros9792 Жыл бұрын
Hi Angie have you tried the silicone sleeve on the skinny tumblers 😫
@AngieHolden Жыл бұрын
I have not.
@heatherscreativecorner2 жыл бұрын
The inserts are showing out of stock for me. Do you think another brand would work the same?
@AngieHolden2 жыл бұрын
I have only tried this brand so I can't say.
@glazersworldakamaryschmitt88112 жыл бұрын
I know you said you aren’t great with the seams but how would you go about getting that lined up properly? Should the paper overlap or line up edge to edge when you wrap it around?
@AngieHolden2 жыл бұрын
I do a slight overlap a lot as I personally do better with that. To line up properly, cut the bottom of your paper straight so that you can rest is on the table as your wrap around with your tumbler standing up. Then the entire thing will be straight.
@1120forevrr2 жыл бұрын
If you ever for example press for a longer time will it be ok or mess up the project??
@AngieHolden2 жыл бұрын
You can mess up a project by overheating.
@AjadiKhatun19 күн бұрын
lwant to buy from Nepal
@ozany182 жыл бұрын
can i use the printer paper sublimation and smart vinyl together in one please let me know ?
@AngieHolden2 жыл бұрын
You could I guess. I just generally make a sublimation design and do it all at once.
@elizabethokeefe17032 жыл бұрын
Have you tried any other brands of inserts other than PYD Inserts?
@AngieHolden2 жыл бұрын
No I have not.
@ishaniastanley85382 жыл бұрын
Could you share with me the measurements you’re using for the skinny Tumblr
@AngieHolden2 жыл бұрын
I downloaded that watermelon file from Creative Fabrica and it was already the right size. I just printed it!
@misslitaatl Жыл бұрын
Thanks for letting us learn from your mistakes before we waste all of our blanks. Great video!
@AngieHolden Жыл бұрын
My pleasure!
@tammybishop82392 жыл бұрын
Is there a video that shows how to print the watermelon wrap and what program to use?
@AngieHolden2 жыл бұрын
Try this: kzbin.info/www/bejne/oZfQq6WCo8ians0
@1samuel2302 жыл бұрын
Do you have a web address for the pyg inserts? I can't seem to find them.
@AngieHolden2 жыл бұрын
I link to them in the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video depending on how you are watching.
@73ondrea Жыл бұрын
Any plans to do another Sublimation Camp?
@AngieHolden Жыл бұрын
Yep! It will be in May!
@sandradowell96662 жыл бұрын
Thank you so much! I have been using a different method but you have to turn it a million times and it takes about 30 minutes to make one! I have put an order in for some silicone wraps and will be off to the races once I get them!
@AngieHolden2 жыл бұрын
Glad it helped!
@christeenlaiwa23542 жыл бұрын
Woo hoo! Of course you figured it out!
@jennifercooper48192 жыл бұрын
Thank you for this awesome video. I thought there was supposed to be an update that allows you to use the whole area for your design. I am only allowed to make my design 6.75 x 9.25 and I need it to be bigger. Also, when I'm trying to print more than one smaller design on a page I have a lot of wasted space causing wasted paper. I hope that makes sense! Help!
@AngieHolden2 жыл бұрын
That is the maximum with Cricut currently.
@jennifercooper48192 жыл бұрын
@@AngieHolden what software then would you recommend?
@thePhxPrincess12 жыл бұрын
Great tips and mine turned out beautiful. Your instructions were perfect to follow. Thank you for the assist!
@AngieHolden2 жыл бұрын
Glad it was helpful!
@MsBabylu2 жыл бұрын
Great, I just ordered these, they should be here tomorrow. Thank you
@AngieHolden2 жыл бұрын
Good luck!
@denisejohnston62432 жыл бұрын
thanks for the video, just bought one today,,cant wait to try
@AngieHolden2 жыл бұрын
Hope you enjoy it!
@Emily-dg6rc Жыл бұрын
Can you do glassware?
@AngieHolden Жыл бұрын
I would not do glass in the Cricut Mug Press.
@Emily-dg6rc Жыл бұрын
@@AngieHolden Thanks Angie ! :)
@pamstark89032 жыл бұрын
Bummed...no inserts. They are out of stock and no idea when they may get more.