ANGRY RANT: The McFarlane Dark Knight Trilogy wave was RUSHED!!!

[@MnifuzioN]

I just wanna know how they manage to rush figures that are based off the movies over a decade old

[@Spider-Criminal]

Doesn’t surprise me

[@theradicalden6180]

Buy it. Just do it

[@skruuber]

Holy crap spider criminal! 1! 1! 1! 1

[@NeongenesisZ]

Man I love your channel but can't you buy some of the better dc multiverse mcfarlane figures like hush batman or rebirth batman?

[@bigdudewithahood]

@@NeongenesisZbecause Mcfarlane is the worst action figure line for him he hates it

[@TheMechaNerd05]

​@@NeongenesisZ Honestly even though he's always pointed out relevant points and opinions on his channel, but some of the latest products by Mcfarlane during late 2023 proof Spider Criminal wrong, if Mcf is that bad then I assume I wouldn't owned 50 Mcf figures by now, recent comic figures by Mcf totally blow my mind.

[@bigguidokc7619]

McFarlane always cheaps out on the paint apps. It’s the easiest place to save money and still keep the articulation somewhat up to modern standards. The QC on this wave is spotty at best. I had to buy two Dark Knight Bales to cobble together one fully functional figure. The left leg broke off of one removing it from the plastic tray, and both figures had the bicep swivels glued in place. I think you're right about being worried about the long-term durability of these figures. Sigh...McFarlane doesn’t make products to last.

[@OxtlawX]

I’m still waiting on my replacement for what was a broken joker figure. His joint at the bicep swivel fell right off when I barely touched it.

[@CyborgSodaCollects]

It most definitely was. Most of the characters feel like after thoughts. Joker could used more deco on his outfit and at least a potato peeler accessory. Dent looks nothing like Aaron Eckhart. Scarecrow needed a fear toxin effect. Also don't @ me, but Bane is of Latin descent and Nolan just white washed him. So in my opinion we haven't seen the definitive movie Bane.

[@jerrytant9625]

Tbh this is probably McFarlane's strongest wave. That's not saying a lot but now have a proper batman to go with the NECA Heath Ledger Joker

[@samdanmas]

The new Keaton wave looks even worse. It's just unbelievably terrible, except for the Batmobile.

[@whittington72]

With regard to the Keaton Batman wave… I think mostly everyone is on board for that wave for the Batmobile so they can put their 7inch NECA Keaton Batman in it. I can’t wait..

[@tomjames9681]

They’ve done that unmasked figure garbage again instead of giving an alternate head, right?

[@wutang_batman]

The keaton figure looks nothing like him. Needed the keaton pout. Awful. Really wanted it but won't be getting it.

[@uzumaki2689]

Batmobile not even all that 😑

[@Y2HLechampion]

The level of QC errors is so annoying like when I got the Battison version it had the unmasked collar for the masked version and the upside down torso

[@thepkeezy]

Trust the process and be patient. Here is a thorough explanation. Firstly, not a good idea to be yanking at the weakest point. You in fact have created several weak points if you’re pulling on the peg. This video is an excellent example of what not to do! The heat needs to be focused on the arm/wrist side and not the joint. I prefer the hairdryer method for this instance. If you have attachments, use them to focus the heat. What parts can you grab onto here with pliers? You think that little peg on the wrist? Or that chunky ball joint? The chunky ball joint, right? That will provide better leverage, but be mindful, you now have created a single weak point between the peg inside the arm and the ball joint. So guess where it’s likely to snap? Pull a bit, if there’s no “give”, put the heat back on. You’re testing for the “give”, no need to pull hard and force it. You’ll feel it with a bit of practice and patience. Dip just the wrist peg/joint in room temperature water if needed before each attempt of pulling, where the weakest point is specifically. You don’t want the joint/peg to heat up as much as the arm. If the joint heats up more than the arm, you’ll stretch the peg on the inside as you pull and end up destroying it. The idea here is to keep the peg/joint cool and the arm hot, so that the arm becomes the weak point and slips off and around the cool tough peg. The key and focus is the arm, that’s what we’re working on here, not the joint!!! Make sense? You can apply this concept/method to other small joints. *All of this isn’t really as important when it comes to the larger joints in the body. Best of luck. 🧐👍

[@_MECHA_]

Ong

[@vg77574]

You missed the biggest flaw of Bane, McFarlane forgot to sculpt the scar that runs along Bane’s back in the movie, even Mattel were meticulous enough to factor it in their Movie Masters line.

[@richardmark9161]

Last Knight on Earth Bane build a figure was a problem. Endless winter frost giant build a figure was awful too. I heard Solomon Grundy’s got problems. They should just do $40 mega figures and stop this build a figure nonsense. They never get it right. They should fix the problems on this dark Knight Bain and release him on his own.

[@samuelmackenzie5267]

Here’s a surprise, I just got my dark knight wave today and put the bane BAF together. Shockingly both pegs on the forearms were both put in the right way this time. So they McFarlane must received a lot of backlash from the first batch of Banes cos mine seems to have come together just fine. I’m loving this wave, especially the Batman, cos I’ve always wanted a 7-8 inch dark knight Batman figure in the display.

[@lazylefthand]

The batman & robin wave a few years from now is gonna be dope!!!

[@mythical_ds8222]

You gave yourself too much work, all you had to do was hit with a hair dryer for like too minutes so that it gets very soft and pull it out, but i agree that it shouldn’t be a problem for collectors, I’m just saying this as a somewhat experienced customizer.

[@casual_bill8749]

My doctor fate from the black Adam movie snapped at his wrist and all I tried to do was subtly swivel the joint so his wrist didn't look broken. I was gutted as I really enjoyed the movie and all the characters but now I'm hesitant to not only finish off that wave but I'm also not very excited for the prospect of getting any of the figures.. The ball joint on the ankle of the first batman comes apart constantly. The gold label batmans left leg came warped and cracked and I often think about just chucking it in the trash. And my latest issue with the blue hush batman is the ratchets in the ankles are off set making it very difficult to stand and balance the figure. So unfair really.. I love the line and want to see it improve and most the figures I want to buy this year are from mcfarlane but I don't want to hand my hard earned money over for substandard action figures that will quite likely have development issues.. Or even break... People can shit down my throat all they like but I very rarely come across these issues with hasbro products and never had a single issue with Mattels figures

[@DarrenWatson64]

Why are the QC Issues on these DC Multiverse figures keep getting worse? I have THREE figures that have joints broke on me even after I put them in hot water to loosen them, to the point that I chose not to preorder any future figures including the Dark Knight trilogy wave until I see reviews showing how good they are now. In the end, I made the right choice as the QC issues are still happening in these newer waves. At this point, even NECA does a better job than McFarlane when it comes to QC!

[@jpz6768]

Just wait for the bane with a trench coat. It would be better. They will release it before or during winter season.

[@Alan.villegas94]

Man, you did the whole hot/warm water thing wrong. You are not supposed to let it 10 to 15 minutes inside the water. You are supposed to put it for a minute or 2 at top, so you can work the warm and manageable plastic as you want. If you leave hot water for 15 minutes, it will cool off and so will the plastic... And it will get hard again ): It totally works nice and easy if you actually warm the plastic.

[@VenomSnake00]

I had horrible CQ issues with this wave for sure. The Batman had his arm pop off at the bicep and no matter what I did I couldn’t get it to pop back in. There was loose joints alongside stiffest joints I’ve ever felt. Kind of all over the place. I wonder what happened with this wave!

[@erikwegner8758]

I don't understand how these are all selling out. TDKR is one of my top 5 fav films, and I would have bought anything from it, but it was an easy pass on these. I used to love McFarlane back in the early 00's and now am just wishing the license goes elsewhere for Batman.

[@jakea75]

Aren’t they coming out with a stand alone bane figure with the winter coat or was that just a made up rumor

[@DarkspiderDavid91]

Sadly just the rumor, no in house SKU numbers to substantiate it like with the 89 Batmobile and Batwing, which technically ended up coming true.

[@AMERCinfinateK1]

The Bane figure was laughable. Worst figure I've got in years

[@Escaped-FromHellview]

I got a free batfleck from flash wave cause the head was not on , after buying the whole wave , they just sent a new fig and didn’t ask for a return it came in 4 days

[@porko882]

All of Mcfarlanes Batmans seen little rushed but I can forgive that because they are less expensive than other companies like neca and seem to have less qc problems compared to neca.

[@MadCaddyStandard]

Totally agree with this. Before the release, I thought this wave would be the peak of McFarlane's DC Multiverse - I ordered 2 sets of each fig and was very excited. For us in the UK, they probably wont be coming in until probably mid-late April so we have not had them in hand yet but after all the reviews I have seen, I'm very turned off by them. I have changed to ordering just the 1 set and even thinking of cancelling that. Very disappointing. A surprising step back for McFarlane

[@kaidose]

I put my bane together with penguins arms and endless winter jacket so i never put his bare arms on

[@johnblack9885]

The Mattel Movie masters figures look better

[@Escaped-FromHellview]

If they widened the shoulder deltoid a bit making the shoulder / the top of torso being wider would help almost 100% but ya the joker is not as good as NECA

[@Not_Tuff]

What’s the email to get a replacement part???

[@DarkspiderDavid91]

[e-mail]

[@chasinggold6437]

You forgot to heat up the figure, happens when we are spoiled by great figure lines

[@thebatboi1417]

All BAF from McFarlane should at least boil the parts with water once before assemble. 3-5 min is enough, assemble while still warn and the parts will fit. Sometimes (a lot) if you assemble out of the box, that will be pain.

[@somervillewilliam77]

The only BAF I've not had any issues with has been Grundy from Arkham. All the others are a pain in assembly. Still waiting on my Titans wave for Beast Boy

[@Escaped-FromHellview]

Look how good the 6.5 inch NECA joker is , the mcfarlane one is I dunno the coat shirt tie and all is one piece and only two colors

[@AMERCinfinateK1]

While Bane was a disaster, Two Face fig was an absolute masterpiece

[@danielbenjaminmesser6234]

McFarlane’s Princess Bride was the same way…. odd?

[@ludwigvanbubthoven5692]

I don't know what it is, but Todd's stuff is just about a centimeter away from being the best figures in the 1/12 -1/10 scale family. He's just not quite there.

[@MK7-MephistoKevin777]

Well I dont have Scarecrow yet, so I dont know if I'm gonna have trouble with attaching Bane's hands to the arms, You did get a pair of hands on the very first time you assembled Band (I'm guessing) and had problems getting that inner peg out, I am not gonna do any of that, I'm just gonna pick the hand I like the most, attach it, and leave it, Sorry you had to go through soo much, My only complaint is Batman's arms should've been thicker, and I guess Bane's too, Another review guy showed that Batman's arms fall off at the bicep swivel, Well mine wont swivel at all,, in fact I think they are glued in place because of the fact that they fall off soo easily, Okay so I cant articulate the biceps, They are not gonna make another Bale Batman in this costume (I hope they do the Batman Begins costume, and maybe Liam Neeson ? ) But for now, this is the best 7 inch scale Bale Batman we're gonna get from McFarlane. (I have a 6 inch scale MAFEX that is great, but super delicate, and doesn't fit in very well on my Batman Wall that is all 7 inch scale figures) As for lack of paint details on Bane ? that is common on Star Wars 6 inch Black Series figures, so I'm kind of used to that, and plan to begin practicing my own repainting on some cheap knock off 1 dollar toys until I feel confident enough to add those missing paint apps, and I know, we the fans should not have to finish making the figure, That's their job, but it seems like getting figures made fast is in fact the most likely problem, On the good side, at least they sent you another Scarecrow just so you could get the Bane arm to attempt fixing, I'm surprised they did that, and you did get it done after a lot of stress, something I am just gonna leave it alone (When I get Scarecrow and Bane's arms) and not go through any of that. Good ranting, you had some very valid points, But I am just glad to be getting what they made, even with the flaws (Unless I cant get Bane's hands on the arms ? then I'll be ranting angry too)

[@uzumaki2689]

Its like they want me to buy mafex 😂

[@jasonpatchen1912]

Oh banes wrist was stuck? Both my batman's shoulder pads were glued on so low it glued to his triceps rendering his upper bicep swivels static nothing none zip zero swivels I had to run an xacto blade up under both shoulder pads then slice through the glue to reveal the swivel it sucked

[@troyreyes1572]

My banes right leg keeps popping out. Sometimes both joker arms and both batman arms pop out, not as much as banes right leg though. No problem with scarecrow or two face. I don't understand why the joker has a right handed fist. The last thing any joker figure needs is a fisted hand. He's not a fighter. Any batman figure needs to be far more articulated than what we've been getting, same with Spider-Man. They're both physically orientated. This line could've easily been the best line of the year but it was indeed rushed. I was shocked at how quickly I received my order. Two years into his DC multiverse line and there are still problems, mostly inconsistencies, one figure us great, the next one sucks. I guess McFarlane is taking on too much.

[@collegerebel]

Three years. Three years into the line and it still suffers. Can't say I'm disappointed since I didn't like it from the beginning. If only Jada Toys had the line. And in scale with Marvel Legends.

[@jamiekelly6851]

Christian bale is actually quite a bit taller then tom hardy.

[@thebadhandwriting3216]

I wonder if we’re scratching bane’s crotch every time we split the figure lol, it feels bad lads!

[@GRAYMATTER_235]

I don’t buy Mcfarlane the suck. Poor paint, terrible QC, terrible customer service, pinned joints, no thigh swivel they are toys that would be great in the 90’s. But lacking compared to every other toy company. Valaverse has pinless joints.

[@DaWild]

He does have iris' though.

[@uncardedreviews9721]

I like this Bane figure and that's the only figure I want, so unfortunately I will have to wait for this wave to go on clearance, because the other figures are mostly throw aways in my opinion 😂😅

[@robertmusgrove4537]

Don’t think it’s been confirmed but I heard rumors of a gold label with his jacket

[@nathanielmarrs1018]

The eyes look a little off on my batman

[@CYeoung]

You buy cheap figures and then you’re surprised that they look like and break like cheap figures

[@luisn.pietanesi255]

Yup. It is appalling how after 3 years, Mcfarlane toys still can't seem to get things right with their DC multiverse line. Just when it looks like they may be going in the right direction and improving, they end up taking a massive step backwards with their bizarre QC issues or lack of paint and accessories on certain figures.

[@Joshua-lz9sk]

I understand your point but when you go to McDonald’s you know what you’re buying cheap fast food but you still expect a service.

[@franciscoolveralfd]

Sorry man you had bad luck. I just put the arm in hot water for a minute and a half and i just took out te wrist with my theets lol. Im very happy that McFarlane's customer services worked for you. Im in Ecuador so it is a little bit hrd to do that.

[@continentalcosplay1243]

Mine broke the exact same way

[@TheChadTI]

But why? Maybe I should watch the whole video first😂 Also that Bane is a build a figure??

[@isaacortiz5463]

The real Three 6 Mafia! 😂😂😂

[@joegilbo2580]

It's 20 dollars what do you expect they can't put all that paint without jacking the price up

[@theAmazingRaccoon]

Yes, I agree. I wish everyone would be more vocal about the TORSO!!!!!!!! It fucking sux! He can’t sit well. He can’t ab crunch without snapping in half. I love the sculpt but IT IS THE WORST MCFARLANE FIGURE OF ALL TIME. Torso torso. Fuck it!

[@RS-kt6bo]

Even with the flaws of TDKR? What flaws? The movie is a masterpiece. The new age fools can try to nitpick it all they want but that will never take away from it's legend. It was the perfect end to the greatest trilogy of all time.