how to make gold solution || silver gold and rose gold plated

[@vishalsambrekar]

Thank you so much.i am goldsmith .i am watching everywhere,asking everyone bu they dont tell me how to make gold plating solution.your video is best instructor to me. thanks

[@CrewDesigner-q7w]

Sir have you applied this process

[@nilshkmr]

IF YOU DONT KNOW HOW TO MAKE GOLD SOLUTION THAT IS SUCH A BASIC KNOWLEDGE....THEN HOW CAN YOU CALLED YOURSELF A GOLDSMITH.. YOU MUST ME BLACKSMITH OR COBBLER INSTEAD

[@Osama-mt2jm]

The best video I have ever found or seen, i asked many people but no one told the complete formula, thank you very much, many people will benefit from your video. May Allah grant you more success🥀❤

[@jadenephrite]

Thank you for your video. Regarding 0:40, the chemical formula for Potassium Cyanide is KCN. Caution must be used whenever handling cyanide, because cyanide could be fatally poisonous if it is ingested, inhaled or absorbed through bare skin. Regarding 2:25, combining 1 part nitric acid + 3 parts hydrochloric acid produces nitrohydrochloric acid, which is also known as Aqua Regia. Regarding 7:43 gold electroplating solution, if pure gold is used on the anode instead of stainless steel, then the gold electroplating solution will last much longer. This is because the gold cations in the electroplating solution will not become depleted since they will be replenished from the gold anode.

[@expgame71]

Is potassium cyanide mandatory for the proper functioning of the plating? Is it possible to replace it with another chemical element that is easier to find?

[@jadenephrite]

​@@expgame71 Thank your question. Gold electroplating can indeed be performed without the use of cyanide. Alternatives to the use of potassium cyanide is to use either sodium gold sulfite or to use potassium gold sulfite.

[@expgame71]

@@jadenephrite ok thank you for your reply. How to make sodium gold sulfite and potassium gold sulfite, is nitric acid needed?

[@expgame71]

@@jadenephrite yes but the problem with the solutions already made is that it is very expensive for very little gold, I would like to be able to make it myself

[@aru_1396]

What is the toxicity percentage of potassium cyanide used and what is the grade of KCN

[@vishwanathsah8657]

No one explained like this well done bro

[@PowerbyNFS]

Hello sir , am very new in this business although I was checking out this video only & I found your video & knowledge , your idea made investment 90% less then what I actually thought❤

[@vanjasemic8198]

I cant believe!!!! Its wonderful!!! Congratulations

[@AnifG]

Thank you so much 😊🙏

[@cabulingue]

Terima kasih banyak Pak Anif G, Saya doakan bapak selalu sehat, banyak rejeki n berumur panjang teruslah bikin konten yang bermafaat. pak cara buat yg rose gold itu pakai campuran CU tadi ya, salam

[@AnifG]

Amin.. terimakasih banyak om..🙏..iya betul om untuk rosegold saya pakai Cuso4/terusi.. atau bisa juga pakai yang sudah menjadi larutan

[@dongbotang]

Great video! Many thanks from Australia.

[@AnifG]

Thank you so much.. greetings 🇮🇩

[@marinnicolae4215]

A nickel coating is required beforehand because the silver or copper atoms migrate to the outside and discolor the gold

[@2ndPortal]

Why, his attempt looked great. Are saying with time?

[@travismiller5548]

Why nickel comes before chrome as well.

[@lenny108]

Some say the best is to have chrome. On Amazon they sell gold electrolyte that is supposedly abrasion resistant. How is this achieved? Abrasion-resistant gold plating?

[@RahulPatel-kk1ci]

nickel or chrome coating is good but not good for the skin so avoid to do

[@newmonengineering]

​@RahulPatel-kk1ci if you don't use nickel, the silver will tarnish under it and slowly discolor the gold. Most gold plated things are a very thin coating of gold. You can however go thicker to say 2.5 microns and it's a much better protection but also significantly more costly to do. Often they will use rhodium as a base layer over silver if they don't use nickel

[@nilshkmr]

THANKS..... I LIKE THE WAY YOU DESCRIBED EVERYTHING I

[@machruskenzo7346]

Thanks you very much 👍,,, good luck bro 👍

[@HR_SAINI]

You are teaching a masterpiece💗💗

[@MrMo7emad]

İ don't know how to thank you İt's very useful video

[@AnifG]

You're welcome, sir 😊🙏

[@sirbinyamin7636]

Hello, Can you let us know where did you get all the chemicals you are using? because in my country I try over and over but it is simply impossible to find them or they want to sell them by huge quantity... thanks 😀

[@MetalGearIV]

wow you are a gift for humankind

[@alejandrogracia4448]

This is priceless, thank you so much! 🙏

[@AnifG]

Thank you so much sir😊🙏

[@phool289]

Very easy to understand thank you so much 💝

[@avivhanale3174]

Hello sir can you tell me how to make brighter for this solution

[@Gazanferylmaz]

Will, we encountered a problem such as gold sinking over time?

[@sofiahearts4625]

Best video thanks..........👍

[@AnifG]

Thank you so much 😊🙏

[@leleaquino1312]

Thank you for your video. In Brazil I didn't find any video talking about the chemical part of gold solutions How many times can this solution be used? Can I use up to how many grams of jewels without losing the gold?

[@fireworkstarter]

it can be used untill there is no gold left in solution, it will probably slow down on lower concentrations. if you put in 1 gram of gold into your solution you will very likely get 0.99 grams back. how much you use per jewel depends on how strong the electricty is you use, the surface area and the time you plate it for.

[@rajasasitepu9531]

Bang Anif, sdh like n subscribe. Saya sdh tonton video part 1 dan 2 ini. Makasih. Tapi nanya ini, apakah semua obat/zat kimia itu bisa dibeli bebas di toko kimia? Itu aliran listrik saat ngerendam cincin, pake brp volt itu bang. Thanks.

[@manishkumarpatidar7000]

VERY USEFUL THANKS.A LOT.

[@hobiaja7666]

Ada yg jual air sepuhan jadi tinggal pake nggk mas yg kayak itu.....? Terimakasih

[@AnifG]

Di toped ada bang

[@nacholoyola8447]

Muchas gracias por compatir su conocimiento con nosotros !!!!

[@GILBERTOMARTINEZSAUCEDO]

Hi! my stainless steel plate started to corrode during the plating process, and contaminated the solution (green/orange) sediment do you know why this is ?

[@joonaskekoni2867]

You should have used titanium(?)

[@RimzanNiyas]

Use gold anode

[@safirjhnam9296]

مرحبا هل يوجد البديل عن ساينيد البوتاسيوم ؟؟

[@randimadanthanarayana3839]

Thank u sir. Its really helpful for me. Sir, i did this same as your video. And i plated. Rings, pendents. after plating its really nice and success. But it is not possible for chains. Chains are got black and very ugly colour. Can plz advice me sir.

[@mohamadisham3603]

How you settle your chain issue ?

[@قناةالالعابالممتعة-ح9ث]

Thank so mach for this interesting video but i am just wondering of using potassium or potassium cyanide

[@nilupul84]

Hi Dear, I try it gold plating is really good. but something wrong in my solution. some brown dust making on SS Anode. can you tell me. HCL,HNO3,KCN & Water quantity for 250mg 24k Gold . Thanks

[@solmaz.khorashadi]

Thank you for your helpful video. I have a QUESTION, is it possible to make the rosegold solution into rosegold powder?

[@pbjsilverstudio4882]

Saved this video!! Thanks!

[@AnifG]

Yes ma'am.. thank you very much 😊🙏

[@mohideenanver3700]

Thank you so much for sharing plating process

[@karangandhi5216]

Hello sir, Thank you for ur vedio If we dissolve 1 gm how much gms we can polish for 24k

[@kmcsmachinerytools2652]

5000 grm

[@ramujaisawal4821]

Best

[@Midou54]

please, if we want the color of green gold and blue for example, what sulphate is needed to achieve it, and a thousand thanks for this important video, I await your answer

[@dannysoni3518]

Does we need surface activator for gold plating on silver ... if yes tjen how can i make that

[@johnkaka1000]

Thank you so much. It’s a great help.

[@SultanSalmanVlog]

Bang numpang nnya juga ni sama ahlinya.. Kalao untuk pemerah harus pakai potassium cyanide.. ?? Yang berapa persen bang..?? Makasi infonya..

[@hermanrany3325]

Assalamualaikum bang, mau nanya. Bagusan mana sepuh merah dulu atau sepuh putih perak dulu sebelum proses sepuh emas?🙏

[@sgj85]

And what about if we want to do this this process inverse from liquid to solid gold?

[@takishidz7961]

Does it need a precise voltage amont to use and does it have any impacte on the final result

[@tonykarlsson8589]

Good job 😊

[@DarveshKhan-j5d]

Can i used 14k or 10k gold instead of 24k gold to make solution will it still work?

[@nyomanngetis6329]

Maaf boss, untuk sepuh rose gold apakah bisa buat ketebalan tertentu?

[@helloitsanxiety6234]

hi! what about silver 925 plated things? i have a necklace that is indian silver, since it's old and i cleaned it very aggressively last time, a brassy color came out 🥲so now i have a necklace that is a spotted coloration 😭i was thinking of coating it in silver 925 but i don't know how...i'd like to do it myself cause i'm poor but my dad used to make handmade jewelry so i have some equipment, also i like to learn new things. could you hand me some tips? thank you so so much (also i'm form italy so forgive my poor english pls)

[@mochamadvidal4186]

Mantap boss. Kalau boleh tahu, tinggalnya dimana..?

[@wacdiamondofficial]

Pak hanif. Kalau mau ngelapis emas di cincin berbahan stainless, ga bisa langsung kaya di video ya? Apa ada tambahan campuran khusus?

[@AnifG]

Kalo untuk stainless gak bisa bang..ini cuma bisa untuk melapisi tembaga, alpaka, perak sama emas

[@sonuverma2796]

How much volt and amp did u use for gold and rose gold plating

[@gamelife7139]

Hi Bro, thank you for video have a Quistion How make lemon yellow color for gold plating? (mean lighter yellow than 24k like lemon) thank you❤

[@franknieto2760]

Potassium cyanide is very deadly. Where can you get it? Other than gloves and good ventilation, what precautions should one take?

[@AnifG]

yes it is very poisonous, I think a lot of materials for the jewelry production process are toxic, the important thing is to always maintain work safety with the right procedures

[@armazrivera2302]

There is an internet page where you can find potassium cyanide

[@hengkifernando4063]

Mksh banyak ilmunya bg,itu kalau pakai air sepuh yg hambar buat campuran rose goldny boleh gk bg,trus klo hambarnya air rose gold itu di celupin warna jd apa bg

[@hengkifernando4063]

Mohon petunjuknya bg

[@AnifG]

Air sepuh hambar itu gimana bang? Itu saya pakai air aquabides bang dicampur potas sama CuSo4..nanti pas mau pakai dikasi air emas dikit perbandingan (1:3)

[@hengkifernando4063]

@@AnifG mksh banyak bg🙏,mksudnya air emas bekas yg udh di celupin pengganti air emasny bisa bg?

[@AnifG]

Oh iya bisa bang.. sy juga kadang pakai air emas bekas bang

[@hengkifernando4063]

@@AnifG maaf bg agak banyak tanya🙏🙏,tp hasilnya bagusan mana bg ya,dan bedanya apa bg

[@sudhar889]

Hello sir is hcl and nitric acid concentrate on diluted? Please tell 😢

[@flight3624]

How to maintian the bath for large scale production of rose gold

[@AnifG]

It is only suitable for small scale, for large scale production I have never tried🙏

[@faisalishfaq5877]

@@AnifG contect naber

[@chrissmith841]

Does it work out much cheaper making it yourself than buying ready made? thank you

[@sirbinyamin7636]

Hello, does anyone know where to buy those products? A internet site or any other place would be really helpful. Thank you very much

[@Themaker-studio]

I don't think potassium cyanide can be purchased on internet. It's a very dangerous substance.

[@StrengthAndHonorKnowledge4Life]

Lab alley

[@dusanstanic1462]

Can stainless steel be plated and what is the procedure (preparation etc)? And how durable is this plating? Thank you

[@dusanstanic1462]

Where is the best place to buy gold?

[@randyreyes8689]

Thank you for your video, thank you very much

[@bernardkorley6946]

So how long will such a playing last normally before you would have to plate it again

[@Mayarfactory]

Permisi om mau tanya apakah bisa di aply ke titanium?

[@jacquesomersavard7257]

is it possible to make this whit stain glass copper frame or lead frame

[@nacholoyola8447]

Hola muy buenas , maestro, si se aumenta la concentracion de oro se podria hacer un chapado de oro, de al menos 3 micras , al parecer es un baño flash . Gracias por si respuesta.

[@techsvayrieng3280]

Good brother,thank you. Have Other solution for make it bright or not?

[@1937Brett]

When you did the gold plated bit can you use a gold plated strip instead of a stainless steal one to get the same effect

[@RahulPatel-kk1ci]

organic salt can be used to gain 24 kat gold colour. no need to take gold anode

[@1937Brett]

@@RahulPatel-kk1ci can you explain start to finish please

[@LryuzakiLN]

@@RahulPatel-kk1ci can you make a video on it Rahul??? I was kinda looking for it!

[@takishidz7961]

Is there any special specification of the chemicals you using for this experiment

[@Fashion.jpeg_]

Can this solution be used on 3d printed items? Do I need to spray anything on the 3d printed item first if so?

[@jaspergold4589]

Please can you use 18karat gold to make the gold plating solution?

[@AnifG]

Thanks for watching... I can't seem to do it

[@georgejosh1873]

Bang itu air merahnya kalo ga dicampur sama yang emas bisa buat dasaran sepuh ga? Biar merah dulu baru disepuh emas gitu?

[@plumbum1153]

Excellent !!!!

[@InfinityJewellery06]

Can 14k gold be played in this solution

[@aitamerabdrrahim7823]

Please how do I get the 18k paint solution what is the composition

[@rayaraya6720]

Potasium pakai potas apa ya mas agar air sepuhan tidak cepat berubah keruh

[@ishqesahil8864]

Anif I want to gold plate surgical instruments. Can you please tell me what proportions of ingredients are used in yellow gold plating and what is the lifetime of this plating?

[@jacquesomersavard7257]

I have lot of electronic gold part is it possible to use it in this process

[@nurettingencturk1124]

are we going to neutralize three parts of hydrochloric acid and one part of nitric acid ? thanks.

[@anandpanchal6390]

Thanks for share your precious experience How much ml Hno3 and Hcl for 2 gram gold

[@AnifG]

for 2 grams of gold, you need about 10 ml of HCL and 3 ml of HNO3

[@anandpanchal6390]

@@AnifG million of thanks sir🙏🙏

[@pietrajaya]

bang... klo sering menghitam pas bagian pengait waktu sepuh kuning... kenapa ya bang... ada solusi..?

[@AnifG]

Itu kemungkinan voltase tidak stabil bang

[@pietrajaya]

@@AnifG makasi bang... bisa jadi ya... karna adaptornya udh sering rusak...

[@detectormaniaindonesia8131]

Any working PH for this plating? Thanks

[@MohammadH-l6f]

Hello, I have prepare the plating solution as per your instructions, but the colour of the plating is black in colour. Please clarify. We want to know the exact amount of HCL and HNO3. Thank you.

[@nishthagoel9285]

How do you determine the gold plating thickness?

[@BALITEKNIK070809]

Wow mantap tutorialnya, sukses buat channelnya

[@AnifG]

Terimakasih om.. sukses juga buat anda 😊🙏

[@hyperhidrosissupport9186]

can i use potassium ferrocyanide instead of cyanide ?

[@famtovar5385]

So can you reuse the gold solution after one time? If so how many times can i reuse it…. And should i remix with the rest of the solution (unused solution) ?

[@sagaspace]

Can we do gold plating of iron. I want to try on magnets. Is it possible?

[@meowme7644]

What magnets are of iron? You don't mean these shiny Neodymium magnets? Do you mean ferrite magnets?

[@sagaspace]

@@meowme7644 no weaker magnet like fridge magnet neodymium are v strong.

[@travismiller5548]

The neodymium magnets are already nickel plated, you're good to go

[@armazrivera2302]

Can it be applied on pieces of steel ???

[@AnifG]

No, it can only be used for gold, silver and copper

[@armazrivera2302]

@@AnifG If I cover the steel with copper, will it work?

[@Anil80597soni]

Love from india

[@AnifG]

Thank you so much 😊🙏

[@osamielec]

Maybe show how to make a rhodium or platinum liquid . I cannot find this anywhere on youtube

[@lokeshman1710]

is it the same process if I need do a bath electro plating in copper statues?

[@sirbinyamin7636]

The best to plate copper is first nickel plated and after gold plated

[@thetruth1989]

Sir how do you get the 24k gold color not yellow gold color

[@satheeshkumar-un6rl]

Superb demonstration

[@takishidz7961]

I want to know what is the density of the hno3 and HCl

[@kushalmaulloo762]

Hi, i used the same process for 24k plating, but 1/2 quantity. But my jewelleries turned black and dull.. What did i do wrong please?

[@wahyukuncorojati66]

Terlalu lama ketika proses pewarnaan di dalam airnya. Menjadikan barang kusam. Cara untuk memulihkannya kembali dengan cara di poleshing. Dan di proses kembali.

[@gonzalovaldez8204]

Hello, it is an interesting process, when you brown a ring, the liquid that remains is discarded no longer works, how resistant is the gold, how do I make it last longer, I have seen you do other processes of black. as it does. can you teach me. saludos desde Colombia

[@akhmadfazar7004]

Kalo buat 100 potong emas brp takaran emas untuk di larutkan?dan talaran hno3 sama hcl nya jadi brp gan?🙏

[@muchniksolo4980]

@@akhmadfazar7004 biasanya dijitung dr berat mas yg akan di plaiting,aku sendiri jg buat dgn cara itu utk bahan emas 0,25grm dpt menghasilkan kurang lebih 1kg,semoga membantu🙏

[@ArshadAli-ny3dr]

Which metal is the ring you used? And can I do this color on aluminum

[@AnifG]

It's silver...you can't use this solution for alumunium

[@erickvidianto1215]

Hallo om..semoga sukses selalu..saya ada pertanyaan om..berapa lama waktu untuk mencairkan logam emasnya om? Dan yg warna biru itu apa namanya..semoga dijawab..terimakasih om..udah saya like dan sub.

[@AnifG]

Hallo bang terimakasih sudah mampir..untuk mencairkan emasnya gak lama bang sekitar 1-5 menit, jangan terlalu panas kompornya bang.. dan untuk yang warna biru itu namanya tembaga sulfat bang (CuSo4) atau (terusi).. di toped ada harganya sekitar 60-80 rb an per kg.. dipakai sedikit aja 0,5 gram per liter kalo kebanyakan bisa hitam hasilnya

[@deskmat9874]

Good to know I'm not the only one who writes electroplating with a k sometimes just because I felt like it

[@EnriqueGuerreroO]

If I want to 18K gold electroplate a carbon knife (opinel), can I use as anode a piece of 18k jewelry, and, as I don't have a gold solution, can I use simple sodium bicarbonate as my electrolite?

[@AnifG]

I don't understand about that, maybe someday I'll try to experiment about it

[@AbdulKareem-lq3tr]

Assalamu alaikum Haneef jee how to make cheepest gold solutions would yu pls reply

[@padmanavajethy721]

Good work. How to harden 24 carat gold. Any other metal could be used?

[@AnifG]

Thank you so much..😊🙏 For 24k gold solution it can be used to coat various jewelry made of gold, silver and copper

[@padmanavajethy721]

@@AnifG I am a goldsmith . I need to add some hard alloy with gold so that the gold coating becomes hard and the jewellery colour will last longer. Could any hard metal could be added to the solution?

[@AnifG]

For the addition of other metals besides gold, of course you can't sir, this method is only for 99% pure gold which is dissolved, the environment mixed with other metals such as alloys will certainly damage the solution, but if you want to make the coating more durable you can use a nickel solution whose video I will for coming 🙏

[@billmusik9794]

can you use sodium Cynide ?

[@MrMo7emad]

sir i want to ask you for 1 gr gold how many gr i can plat the silver

[@AnifG]

For 1 gram of gold solution can be used for plating about 1.5 kg of silver or it can be for 2 kg of gold 🙏

[@isawalter3465]

@@AnifG can you express that in cm? thank you so much!

[@ccezar84]

Hello Anif. How thick can you plate with this solution without getting dull? Can you achive 2 microns of bright gold plating? This solution plate on non-ferous only? How good is the adhesion?

[@AnifG]

Thanks for watching, I don't understand the answer to your question, but as far as I am it is the cheapest way to get the gold solution, and I always use it

[@isawalter3465]

can you please explain that ? I just know this channel and never saw, he says something about dumbness beyond 2 microns ... sorry german but the guy is super experienced .. kzbin.infovideos

[@isawalter3465]

@@AnifG Hi dear Anif, amazing! I am following this channel. He recommends 3micron for average use up to way more depening on purpose. Is your solution limited regarding micron thickness? thank you! Are you on Facebook for PN? thank you! :-)