Annealeez

Brass Case Anneal

[@lavoydon]

Got mine today. Ran a group of .30-06. Very nice job. Just the right amount of discoloration. Some are Lake City and look just like the came from the factory. Thanks, nice job on design and operation

[@MrKen-longrangegrdhogeliminato]

I think I would like to have one of those Annealeez.

[@everythingphil9376]

Good job!

[@beasty41]

Hey just ordered your annealer!

[@nataliebuck4475]

Very cool!!!

[@Aussie_Dad]

Wow! I've done research on annealing brass since I do reload and this is great. I do have one question for you. I noticed that the brass is just going into an empty container....is there a reason you don't have water in there or does quenching the brass not really matter all that much? I've seen some quench by dropping into a bucket of water while others have used a wet towel. Thanks in advance, I'm probably going to be grabbing one of these things towards the fall.

[@Annealeez]

ddio1978 quenching brass really does not matter. The only time I quench is if annealing very short cases like 300 blackout, just to be sure the heat does not wick to the rim/head of the case. you can find all of the information you like about Annealeez on my website, www.annealeez.com, there are also informational video links on the page that explain quenching.

[@Aussie_Dad]

Anneal eez Excellent! Thank you for the additional information. I've actually shared this video on a local 2A forum I'm a member of to help spread the word. I've seen quite a few contraptions over the last several months but yours is a step above the rest. I can't wait until I am able to place an order in a few months!

[@michaelandersen5453]

bass is a Ferris metal and doesn't need to be quenched. you can do it but it does nothing to it.

[@patrickcamus2842]

Steel is ferrous (Fe is symbol for "ferrous"). Brass and Aluminum are non-ferrous,

[@thevacuumtubejunky9774]

Wow, that sure beats the heck how I've been Annealing over the years. Are you the manufacturer or just the distributor or both?. thanks for sharing! Eric Dee.

[@Annealeez]

I am both the manufacturer and distributor.. i only sell the machines on the internet at www.annealeez.com

[@Harleychromeman]

I just ordered my machine from you. Do you already have them in stock? Greg Finley

[@Annealeez]

+Harleychromeman Thank you!!! no i do not have the machines in stock.. due to heavy order volume, i am running one to two weeks behind in shipping..

[@Annealeez]

No.. i do not have the machines in stock and ready to ship.. the current lead time is still 2-3 weeks..

[@farmerjoe338]

Very interested in your machine , will it run all calibers of brass or is it just for certain calibers ?? Thanks

[@Annealeez]

you can run most calibers through the machine.. i do make different wheels for very short and/or long cases.. and the same for magnums. you can find more information about Annealeez on my website.. www.annealeez.com

[@jscobes8614]

Any Dealers in Canada? If not how much to ship to Canada?

[@Annealeez]

+JScobes No dealers in Canada.. shipping is $65.00 from Florida to anywhere in Canada, we've sent a few up there.. please see my website www.annealeez.com

[@Annealeez]

I've been thinking about a company slogan.. Something catchy and perhaps a bit naughty. here are some suggestions so far, does anyone have more? 1. Condition your Brass 2. For a Hot Piece of Brass 3. Happiness is a Good Piece of Brass 4. Prepare your Brass with Annealeez

[@JamesDElliott]

Anneal eez How about "We like it when you stare at our hot brass" If you use it I want a free machine!!! ;-P

[@JamesDElliott]

Anneal eez Or "Turn me on, light my fire, and and get my brass movin"

[@Annealeez]

The most popular was "Happiness is a Good Piece of Brass"

[@stevengordon7260]

do you have configurations for 9mm and 10mm pistol brass

[@Annealeez]

i do not..

[@Annealeez]

no.. i do not..

[@hillpuller]

If you watch closely you will see some of the first pieces of brass with bent case mouth don't make one full revolution...... I hate to be a critic but that machine does not work very well. Take a look at the Giraud. You will get much more consistent results

[@Annealeez]

No problem with critics.. i welcome all kinds of feedback.. perhaps you should also look at some of the other videos and see just how well the machine does actually work.. (this was my very first video of the very first machine I built) then compare prices for the Giraud to my machine.. if you purchased the Giraud, you bought a very nice, well built machine.. and you paid a lot more for it to do the exact same thing..

[@leonjones6017]

Question does 45 year old military brass ( once fired ) harden with age???? I am pulling ammo that was reloaded in the early 90,s and never fired. Should it be annealed before I sell it??? The reason I know that it was only once fired is I broke and bent many a de-priming pin on the 1800 30-06 casing. I had planned to do a lough of target shooting but work time and range time never worked out. Than shoulder injury's put an end to that. My son does not want the 06. So it is by by to all of it. What I am thinking about is something on the AR-15 platform like the 300 blackout that I can use for deer hunting in this state. Because 22 is NOT legal to hunt deer

[@doncampbell6656]

R u on Facebook?

[@Annealeez]

Don Campbell Yes we are on facebook. You can find a link to the facebook page at www.annealeez.com

[@Annealeez]

For an Honest review from a customer, HornadyLoader kzbin.info/www/bejne/ZnqwmoFnoryLoK8

[@Annealeez]

Check out this video by XTreme Reloading on Rumble.. rumble.com/v2c8cgw-extreme-reloading-special-edition-does-annealing-work.html

[@Annealeez]

Here is a great "how to" and the do's and don'ts of annealing video. kzbin.info/www/bejne/nJqso3-sdrqbbNE

[@wingbolt6852]

Ordered one of these machines a year ago. Done thousands of 30-06 for my 1903a3 and M1 Garand. I am very happy with the simplicity and price of machine.

[@leonjones6017]

Question does 45 year old military brass ( once fired ) harden with age???? I am pulling ammo that was reloaded in the early 90,s and never fired. Should it be annealed before I sell it??? The reason I know that it was only once fired is I broke and bent many a de-priming pin on the 1800 30-06 casing. I had planned to do a lough of target shooting but work time and range time never worked out. Than shoulder injury's put an end to that. My son does not want the 06. So it is by by to all of it. What I am thinking about is something on the AR-15 platform like the 300 blackout that I can use for deer hunting in this state. Because 22 is NOT legal to hunt deer

[@daytonabeachholsters3529]

Awesome! Much better than any of the others I've seen! Great job!!

[@Annealeez]

Jai Lee Thank you.. I really appreciate the comment!!!

[@corytebay3742]

Fantastic work!!! I cannot get any of your links to work - where are the plans you refer to? Thank you for sharing your expertise, it's rare that one such as yourself is so generous with his intellectual property!

[@michaelandersen5453]

Just got mine last week and set it up this last weekend. Not hard to set up the nozzle is a little tricky. Wasn't quite perfect and it just started to melt the top wheel but only made a dark stop. I did about a hundred cases the first time. It becomes hypnotic watching it. The only thing I find a problem is, once set up the gas knob on the front is turned towards the metal wall. It is very hard to adjust the flame reaching behind the torch. But once it is set it works great. I have new Winchester .223 brass and am not sure if it was annealed, it looks too clean. But since I'm necking up from .224 to 7mm I annealed them anyway and the necking process is going very smoothly. And using the Temilaq I could see how far down the case the heat was going.In fact I wasn't heating them enough at first and adjusted the speed and bingo they started coming out perfect. There is not one other unit on the market that can give you so much for the dollar. you put a bunch of cases in and you don't have to touch it. Not like the more expensive ones where you have to sit there and add shells the whole time. Thank you for a great product.

[@Annealeez]

the torch holder can be modified real easy, and eventually i will implement this on new machines.. kzbin.info/www/bejne/inapZ4CKpbSqbpI

[@Annealeez]

we have plans of putting the new torch mount on the website.. the website is being revamped now.. not sure how much longer it will be.

[@stephenwysocki4913]

Awesome machine!

[@Annealeez]

articles about annealing brass: kzbin.info/www/bejne/imWYh2emmqiVfLM and bisonballistics.com/articles/the-science-of-cartridge-brass-annealing

[@mohammedcohen]

Excellent little device (aka gerat)....look perfect for the home reloader, especially a reloader who wants to extend the life of his cases and my only have commercial cases of which most are not annealed!!! Nice work!!!

[@Annealeez]

Mohammed Cohen Thank you very much.. constructive feedback is always appreciated, and positive feedback makes the day!

[@roninselman6772]

Damn, that's cool!

[@colinbalderston4859]

how do I get one of these to Australia.

[@michaelhallak4374]

This is awesome! what's the process for switching to larger brass cartridges like belted magnums?

[@Annealeez]

Michael Hallak Michael, thank you for the compliment! no process, Annealeez is designed to cycle calibers from 223 to 30-06, with nothing more than adjusting the torch head. Any bigger or smaller cases need different wheels and ramp adjustments. If you go for bigger calibers you sacrifice the smaller and visa versa. I can make different sets of wheels and show how to adjust the ramps, if you really want. I've not considered what to charge for an extra set of wheels at this point.

[@Annealeez]

Anneal eez Michael I've finally released the large caliber kit. you can find it on www.annealeez.com or you can see it on youtube at kzbin.info/www/bejne/oIauiHaJqJ5gmbc

[@jimmyhelton127]

Great looking, great price. I'm ready to order one.

[@leonjones6017]

Question does 45 year old military brass ( once fired ) harden with age???? I am pulling ammo that was reloaded in the early 90,s and never fired.

[@Annealeez]

no the brass will not harden with age.. brass only "work hardens". so when brass is forced to bend, bow or stretch it work hardens.

[@leonjones6017]

Well you learn something new every day. That is one thing that I was told wrong. I guess this person I know wants my 30-06 brass for cheap.

[@StropSharp]

That's more like my budget rather than the Bench Source Vertex for 600 bones. I like technical shit, but this is not rocket science. For a guy who doesn't shoot all that much competition, but still hunts seasonally needs the same consistent loads. I shoot a .17 Remington and find the necks get brittle fast being it has a small neck in the first place and need to sometimes restore the neck tension while getting the uniformity, and extended loadings as well. Nice looking product simple... for now I'll stick with my drill.

[@bobklimple7526]

I also give it a thumbs up. can you purchase wheels for the belted magnum .264 win mag /.308 win mag. also the 22 K-Hornet?

[@plow9133]

thinking about buying one of these, what is the best temp to anneal 223 brass

[@Annealeez]

annealing brass requires 750F

[@MrJeffreyTSanford]

Bought it

[@joediesel187]

Very nice setup. Website?

[@Annealeez]

joediesel187 thank you joe, no website yet, but working on it now. I did put it on facebook and google+.

[@Annealeez]

Anneal eez it's up now. www.annealeez.com

[@Annealeez]

Come and see us at the Deland, FL Gun Show gunshowtrader.com/gun-shows/deland-gun-knife-show/

[@TheSgtk9]

good vid, what is the website to order. Thanks

[@Annealeez]

+TheSgtk9 thank you!! www.annealeez.com

[@talongunter7717]

HELLO WHAT IS THE PURPOSE FOR THIS I HAVE RELOADED PISTOL AND GETTING READY TO START DOING MY 223 & 5.7X28 THANK YOU FOR YOUR TIME

[@Annealeez]

Talon Gunter the purpose is for rifle cases mostly, it reconditions the brass, so it's easier to size and trim. It increases the case life bunches, and most importantly, increases/enhances accuracy.

[@talongunter7717]

Talon Gunter thank you for your time

[@Annealeez]

Talon Gunter you're very welcome.. thank you for asking questions, if I can help in any way, please don't hesitate to ask.

[@Annealeez]

Here is an awesome article on annealing brass, bisonballistics.com/articles/the-science-of-cartridge-brass-annealing

[@wiederladerTv]

How much is it?

[@Annealeez]

wiederladerTv pre-orders inquireries can be sent to the below email link, [e-mail] will be $275.00, includes everthing you see in the picture, except the cases and a propane bottle.box measures 11 inches by 11 inches and is 5.5 inches deep, it's made from all 16 guage metal and powder coated.free shipping to addresses in the continental united states. www.annealeez.com

[@wiederladerTv]

Is it possible to ship to Germany?

[@Annealeez]

wiederladerTv I have no idea about shipping it to Germany. I'm sure the shipping alone would be expensive. If you knew someone here in the states that could purchase it and send to you there as a gift?

[@wiederladerTv]

No, I do not have...sorry.

[@jeffabuck]

I'll check on postage for ya..

[@leonjones6017]

Question does 45 year old military brass ( once fired ) harden with age???? I am pulling ammo that was reloaded in the early 90,s and never fired. Should it be annealed before I sell it??? The reason I know that it was only once fired is I broke and bent many a de-priming pin on the 1800 30-06 casing. I had planned to do a lough of target shooting but work time and range time never worked out. Than shoulder injury's put an end to that. My son does not want the 06. So it is by by to all of it. What I am thinking about is something on the AR-15 platform like the 300 blackout that I can use for deer hunting in this state. Because 22 is NOT legal to hunt deer

[@leonjones6017]

Question does 45 year old military brass ( once fired ) harden with age???? I am pulling ammo that was reloaded in the early 90,s and never fired. Should it be annealed before I sell it??? The reason I know that it was only once fired is I broke and bent many a de-priming pin on the 1800 30-06 casing. I had planned to do a lough of target shooting but work time and range time never worked out. Than shoulder injury's put an end to that. My son does not want the 06. So it is by by to all of it. What I am thinking about is something on the AR-15 platform like the 300 blackout that I can use for deer hunting in this state. Because 22 is NOT legal to hunt deer

[@Annealeez]

here is a great video about the metallurgy science behind annealing. kzbin.info/www/bejne/imWYh2emmqiVfLM

[@Annealeez]

Use Tempilaq to calibrate your machine. kzbin.info/www/bejne/sGS6Z3pvqtKkqJI