👨🏻‍🔧Another Day at the Junkyard: 2 4L60Es PULLED FOR THE DAY! (2x4 & 4x4) 🥩A1 JERKY 👀🥩

  Рет қаралды 814

Junk Man A

Junk Man A

Жыл бұрын

💥🥩 www.A1JERKY.COM 🥩💥
GOURMET BEEF JERKY AVAILABLE SOON!
••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds
🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️
Email:
the4L60Eguy@gmail.com
🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧
Always bring:
A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!
Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar
Crossbars/Subframes
18MM 1/2” shallow socket
18MM Wrench
21MM 1/2” long socket
21MM Wrench
(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)
Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips
Torque converter:
1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)
**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**
I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!
Hope this helps!
Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!
Thanks for watching!
COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!
Thanks!
-JunkManA👨🏻‍🔧

Пікірлер: 15
@garycallahan7867
@garycallahan7867 Жыл бұрын
Great video! That second one looked clean.
@Ajunkman
@Ajunkman Жыл бұрын
Thanks bro 👨🏻‍🔧🙏🏽🙏🏽 some of those cleans ones are hard to believe!! Lol
@njthrift
@njthrift Жыл бұрын
Thanks for the video 👍
@Ajunkman
@Ajunkman Жыл бұрын
Thanks for watching 🙏🏽👨🏻‍🔧
@grifonks
@grifonks Жыл бұрын
JMA T-shirt material, "It only works if all the bolts are out of it!".
@Ajunkman
@Ajunkman Жыл бұрын
Hahahaha!!! That’s funny! I might just have to make that happen 🤣🤣🙏🏽👨🏻‍🔧 thanks for stopping by 🤝
@davidtrisha1469
@davidtrisha1469 Жыл бұрын
👍
@Ajunkman
@Ajunkman Жыл бұрын
🙏🏽🙏🏽
@daviddzedzy9194
@daviddzedzy9194 Жыл бұрын
THUMBS👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@Ajunkman
@Ajunkman Жыл бұрын
🦾🦾🦾🦾🦾
@ConnorGuldner
@ConnorGuldner Жыл бұрын
Love the videos bro. I’m about to pull a 4l60e for my v8 jeep swap. I really don’t want to rebuild it… is there anything I should look for to get a clean one? Thank u 🫡
@Ajunkman
@Ajunkman Жыл бұрын
Thanks bro I appreciate the feedback 👨🏻‍🔧🙏🏽 try and go for the wrecked ones first and pull the oil pan first and inspect it for overheated oil and/or clutch material (metal) in the oil pan!
@girthy10incher23
@girthy10incher23 Жыл бұрын
How much do the wrecking yards charge for transmissions?
@Ajunkman
@Ajunkman Жыл бұрын
Close to $400 nowadays
@girthy10incher23
@girthy10incher23 Жыл бұрын
@@Ajunkman Even for a bad one?
Они так быстро убрались!
01:00
Аришнев
Рет қаралды 1,3 МЛН
My Go-Kart Corvette FINALLY Gets a Body!
31:44
Cleetus McFarland
Рет қаралды 670 М.
CHEAP ROLLIN is live!
1:35
CHEAP ROLLIN
Рет қаралды 3
How to do an ENGINE SWAP 🏎💨
0:51
Nate Rider
Рет қаралды 1,1 МЛН
Every Engine Layout Explained
18:00
Donut
Рет қаралды 3,3 МЛН
Самая дорогая реклама Lexus forever
0:15
Сергей Милушкин
Рет қаралды 508 М.
Это самая гигантская машина!
0:26
Nico Clips
Рет қаралды 4,2 МЛН
БМВ ОБИДЕЛСЯ и пролил СЛЕЗУ🥲#shorts
1:00
Асфальта.нет
Рет қаралды 3,5 МЛН