👨🏻‍🔧Another Day at the Junkyard: 4L60E REMOVAL UNDER 10MINS + A1 JERKY!🥩🔥🥵

💥🥩 www.A1JERKY.COM 🥩💥
GOURMET BEEF JERKY AVAILABLE SOON!
••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds
🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️
Email:
[e-mail]
🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧
Always bring:
A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!
Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar
Crossbars/Subframes
18MM 1/2” shallow socket
18MM Wrench
21MM 1/2” long socket
21MM Wrench
(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)
Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips
Torque converter:
1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)
**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**
I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!
Hope this helps!
Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!
Thanks for watching!
COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!
Thanks!
-JunkManA👨🏻‍🔧

[@garycallahan7867]

Super sketchy! Smart move to put those rims under it.

[@Ajunkman]

Yeah bro that one was a lil scary for sure!! Thanks for stopping by 🦾👨🏻‍🔧

[@navajorezathlete1202]

After pulling a ford 4x4 trans a chevy was so freaking easy 😅😂

[@Ajunkman]

Haha yeah ford can be a bit tricky Especially that upper starter bolt 🥴🥴🥴🤣🤣🤣

[@davidtrisha1469]

👍

[@Ajunkman]

🙏🏽🙏🏽🙏🏽

[@grifonks]

I bought 6 3oz packages Mano, That second trans was sketchy as heck!!

[@Ajunkman]

Wow I just saw that!! Thank you very much bro you rock! 🥹🥹🥲🥲🦾🦾🦾👨🏻‍🔧👨🏻‍🔧👨🏻‍🔧

[@grifonks]

@@Ajunkman I figure its worth supporting you for all the time and effort you put in videos. Plus I like beef, mango, and habanero, finally I told you I would buy mange, Stay well JMA!

[@dgc940]

I didnt know chevy ever used a allen on torque converter. Kind of dumb move chevy made a bolt head worked for years. What the heck you doing with all these transmissions? Pulling cores for a trans shop? Whats with all the parts with orange paint? Mean its a good part?

[@Ajunkman]

They use them on 99-00 4x4s from what I seen I think in 2001 they realized it was a dumb idea to use the rounded Allen bolts those things are a pain in the a*sss 🤣🤣

[@wippersnappertv]

Could you please tell me how much on average it is to buy them from the yard?? I just pulled my 4L60E out of my 1500 avalanche thank you bro

[@Ajunkman]

They’re going for about $350-$400 nowadays they just doubled up on price recently😬😬😬😬