Another Goodbye 👋

[@carstenmehlhop4203]

Thanks for your support on german engineering, Mike 🎉

[@favorit_fan6583]

Hi Mike. Nice to see that there will still be some Fendt Content. Regarding the topic of a Frontloader on a 900 series. There is a french company MX, they build a TX 430. Which is a mean frontloader. Maybe you check on that. Regards from Germany ! Happy Christmas

[@atnfn]

Found a video on youtube what it looks like, if Mike sees your comment. kzbin.info/www/bejne/hYSwZJeVlpqioqM. Looks like it's perhaps that company's youtube channel.

[@keiths5405]

How about a Fendt 728 as a loader tractor? Same cab as 724, same transmission setup as the 930 but with the new Agco Core engine. An engine developed in Finland by Valtra/Sisu should be a good cold starter!!

[@mariorembold7999]

One thing for sure: This kid knows how to play! 😅 A Fendt 930 7 Series for pushing snow, that is a statement. But I agree with the other comments: That tractor needs a MX TS430 frontloader with a huge bucket! 😎

[@dr.laurel2156]

i think i saw a teardrop in the eyes of the 724 as he was transported off the Farm ...

[@randyjantzi8600]

The switch for your snow blade wings will drive you crazy!! Loose the electric diverter valve and run hoses to the back remotes. Then you can run the wings on the thumb stick on loader valve.

[@nocoolname32]

that 720 produced the best videos on your channel as far as im concerned, loved the going to mcdonalds in a blizzard series.

[@KriegerDelfin24]

You could get a Quicke Q85x Frontloader for the 930.

[@lafermedu14etlagriculteurs29]

You can have an Mx loader for your 930. Or a merlo with the 3 points and the pto, to empty the bags.

[@Greenroad2020]

Don’t get a merlo they’re garbage. Manitou or jcb for telehandlers is the way to go

[@lafermedu14etlagriculteurs29]

@@Greenroad2020 we have been using merlo for a long time, currently a multifarmer 40.9, very few problems, it works really well. we had a 26.6 evt and a multifarmer 30.9, the 30.9 was less good. we prefer merlo for the 3 point hitch and cab design.

[@donaldthomas5852]

Just came across your channel this morning watched a couple of different videos. I was raised up farming small potatoes compared to your farm. With my dad we ran a dairy 60 head about 40 beef and 100 hogs, 300 acres of corn and soy beans , and 7 acres of tobacco. We mostly ran Massey Ferguson tractors had good service from them. Today I have a Massey and a John Deere and a IMT. My son runs strictly John Deere’s. I like your operation using the different brands John Deere, Frendt, Case IH. My grandpa ran International’s, I’d like to have a Case IH. Well enjoyed your video.

[@hawaiig4401]

Mike There is new fendt 700 gen7. The 728, 300hp. 7,5l agco newly designed engine. It is smaller than the 9 series but bigger than 700gen6. Has loader

[@jamesbedford5605]

get a Tip Toe bucket for the front loader and would improve the height you can load into

[@jocelyngainche2578]

Hello Mike as a French farmer I would advice you to install a MX front loader they have a version for heavy tractor. This type of loader are better design than the fendt cargo 😉

[@matmatoudef]

In France we Don t See much Cargo… as we have MX😅

[@G2chantebaud]

Everithing is better designed than a fendt cargo loader! On such tractor, I wouldn’t put a MX loader.

[@jocelyngainche2578]

@@G2chantebaud if Mike likes fendt cargo he will love MX 😉

[@matmatoudef]

@@G2chantebaud MX have Design one for 300+hp tractor! The cargo on the 724 will suffer more than a 430mx on the 930!

[@farmguy2400]

I've never heard of that brand before, and I don't think that it is available in North America. The most common brands we have in NA are ALO, Stoll and proprietary products from John Deere and Fendt.

[@AlbertaBoy745]

Hey guys hurry ,we gotta get Mike 200000 for Christmas

[@kevenhiemie]

Hey Mike That new tractor would look real sexy with a snow plow and a snow blower.

[@drewhouston2324]

You can get the old style shoes for the HLA blade will help you a bit more on ground contact with gravel conditions compared to their new road style shoes as well.

[@farmer5788]

The new MF 7S series with AGCO engine and Fendt CVT trans. awesome cold starting and excellent loader tractor

[@JulianKgr]

MX has a loader for this size of tractor, the MX TX 430. It's a french manufacturer

[@robertfranssen]

Very cool tractor Mike, i love fendts. The steering is great , transmission is awesome. Man Engin is fantastic and then the sound. For a newer sound these are awesome. Older Fendt like with the helmetdesign as i call it haves the best sound ever.

[@Bomokbrody246]

Mike just needs a mid sized pay loader. Would help with rocks and snow removal and many many other tasks! 17:45

[@gordm5567]

you should get a telehandler a JBC is a good choice because of the side entrance & you transport it to the grain bag site with your gooseneck trailer

[@rongrose3746]

Wishing you ALL a Merry Christmas and a Happy, Healthy, Safe, and Prosperous New Year !!

[@robertgoetz2678]

You are absolutely right with your opinion on MAN engines, you got a D1556 in there! D stands for diesel 15 for 115 mm bore, 5 for 145 stroke and 6 for a six cylinder block

[@k.koster1008]

Good choice Mike! I think it is also a nice tractor for your small drill. For that purpouse, a set of duals would be nice. And with the MX TX430 loader (already recommend by others below) this will be a real versatile tractor. Merry christmas to you all! 🍻

[@coreyneal3705]

Mike, thank you for not making us wait to find out the replacement for the 724. The wait to find out what the replacement for the 1167 was was painful.

[@FarmerFin]

New Fendts with MAN engine doesn’t have a glow plugs it relies on the high compression rate that engine has (21:1) and fire rings. That front loader others have already mentioned, made by MX in france is one option as a loader. Greetings from Finland! I work as a service mechanic at my local Fendt dealer.

[@Agrartechnik_Fan]

good to see a new video

[@ruffnutz71]

Get yourself a good Telehandler Mike , when I had a farm it was the most used and versatile piece of equipment on the farm. Cheers from Australia.

[@ileenmcminn2062]

The 724 didn't want to leave, that is why it wouldn't start!

[@michelle778]

Quicke makes loaders that fit the 930. Actually they make loaders - all the others make scrap metal in loader form.

[@mariorembold7999]

Hey Mike, first I was shocked and disappointed about letting the 724 go. But the replacement I like! 👍 Nice tractor 😊

[@larryjones1774]

Merry Christmas to all.

[@brahmvandop100]

I love how you are always changing things up! No front PTO eh? No steering brakes either.

[@KgothatsoThandi]

Congratulations on the new tractor. It is a nice-looking machine. Merry Christmas 2023 to you and your family.

[@hawaiig4401]

Sad to see 724 go. But atleast you replaced it with another fendt🎉

[@danmosholder7245]

From my family to yours Merry Christmas and a Happy New Year

[@thomasvogelgesang667]

Congratulations on the new tractor. It is a nice-looking machine. Merry Christmas to you and your family.

[@LindenMasters]

You can add supports to the front hitch that bolt into the control arms I just put them on a 942 that plows snow here

[@RandomGuy-oy5hf]

Good to see still some Fendt around. Its about time to see sone Claas aswell :D Get some demos!

[@johnny567deere]

Very nice tractor. Now you need a nice snowblower to complete your winter setup

[@mikemitchell2554]

Agreed, that was the plan if it snowed

[@derrickpettit86]

Congratulations on the new tractor mike, fendt is just Cadillac tractors ,they are saweeettt, 724 was a nice tractor, but like you said not reliable in the winter, thanks for sharing an I look forward to seeing the next video 💪

[@ldtenenoff]

WoW Those 7 series have cleared so muxh snow with u mike suely u will miss the ole girl

[@mikemitchell2554]

I will!

[@dennismartin03]

Love that new tractor. Also like how mike always knows what our questions are and trys to answer them👍👍

[@JoeAmmerlaan]

Fendt 724 start no problem in the cold in -20 in ontario not plugged in, I wonder if the batteries over there in Saskatchewan have less cold cranking amps

[@johnc8112]

Your going to Push a Lot of Snow ❄️ when we get some. Keep up the awesome work you do with your family and crew. Merry Christmas and New Year 🎉

[@thesquad8829]

Mike you can put a loader on the fendt 930

[@dennis2376]

So many buttons! :)

[@dustinmarquand5301]

Hope this tractor is more reliable!

[@Blackearthexcavationandtiling]

I would find a loader for it ... Westendorf lists one for it .. Miller loaders .. all sorts of brands available - surely someone makes a loader that would fit ...you have to have a loader tractor around ... after reading some of the comments - it appears there is a very nice loader made for it - which will be your best route!

[@andban92]

Can't wait for one of these videos with 20 below zero and Mike doing ultmate test for this beast.

[@ridgemcburney3278]

Gotta love the Cat engine! 2:21

[@thrushman]

Tune in next time when Mike reveals his new Meclac 6MCR, excavator, track loader and telehandler all-in-one machine. Whether loading grain bags into semis, digging rocks, moving snow, fixing water ways, cleating brush, knocking down trees, cleaning up around the bin site, lifting machinery, removing/installing duals, or just digging trenches, this one machine does it all and it's cheaper than a loader tractor.

[@edwindelange4788]

Congratulations on the 930 it’s a great tractor, one small tip put the top link on the front in the top hole so you have an upward angle when you are pushing the blade just my 2 cents, good luck and greetings from the Netherlands

[@markyoull6744]

merry xmas mike and family all the best for 2024

[@KevinChristiansen-i2q]

Nice looking new tractor Mike

[@poelmaatjuhh-4468]

First I was sad about the 724 going but love the replacement with the new motor. And happy Christmas everyone

[@mattitorkko]

Nice update, AGAIN! 🤩🤩 Keep these videos coming! BUT there is always a but.. Why not new 728 (gen7), with the loader? It has sisu engine from FINLAND (ok it is called agcopower nowdays but..)

[@Ubeer85]

The new 700 series have a new agco 7.5L engine.

[@stmcelroy4829]

Mike you should look into A JCB telescoping arm small to mid size payload we. I think you’d like it. Ag loaders are light duty junk

[@SoWhatIfI...]

Merry Christmas! Santa's been good to you!

[@joescheller6680]

Can't believe they don't make a loader for it. Surely some nanufacturee does. They make three point fork lift attachment surely could put a bucket on one with end over dump uses them to load apples in Washington into hopper

[@maudepotvin8660]

If you put chains instead of your central front link you'll able to push the snow much higher !

[@Swfl_farmer]

Get the new fendt gen 7 728. It has the AGCO powered engine. It would be a perfect replacement for the old 724.

[@EvanC8]

Our feedlot uses Deere front wheel assist tractors and they work every day in the cold and have no issues. They have been excellent.

[@P_Rund1952]

Wow that's a lot different from the 930 I drove (mid 60's Case 930 about 85 hp until we put a turbo on it). It looks like a person would actually need to read the manual to figure out all the electronics.

[@Gillozz]

Mike buys tractors like i buy a bag of chips in the store! Congratz.

[@recklessbehaviour01]

Morning

[@mozkari5865]

Hey Mike! I believe there is a loder that can fit the 9 series. Somewhere I've seen a pic of a 6th gen 9 series with quicke q8m. Might be worth checking out!

[@SchrottiJr]

MAN also makes a lot of engines for Military purposes, often almost 1:1 of what you´d get in a commercial vehicle, that´s why they start whenever you ask them to start. 👌

[@elephantcompany6061]

I see an 1135 there with duals... That's a keeper. But the new fendt looks nice aswell. DEF should be removed from everything. I don't know much about these fendt but I hope a system exist to remove the def. It's useless in sub zero temps and always causes problem.

[@verlinswarey507]

At least hopefully now (since he had a good crop the last couple of years) everyone isn’t going to be asking Mike how he can afford all this new equipment!

[@seantormey3531]

Very nice tractor. Best of luck with it.

[@schwabischeagrarfilme8667]

Also Quicke Alo builds a new big Q9S loader its big enough for a 900series

[@LukasSmit]

Fendt tractors always looks so nice, that startup was nice compared to the old one 😅

[@jaybernieschoep3491]

Read the operators manual 😮

[@paulknipe9881]

Great vids has allways just a pitty you havent a big shed to get all that lovely equipment in

[@chasemaster3117]

Don't AGCO sell Valtra in Canada? 728 has the same engine as the Valtra Q anx that works in Finland

[@Mygirlfriend3141]

Who all agrees that this winter with Mike has been one like never before

[@williamwood816]

Merry Christmas

[@Fjarninger]

Why not try the new Fendt 728 (gen7) with the CORE75 AGCO Engine? I guess Fendt 930 is a more solid choice.

[@ZackIskool]

Case 7014 with grapple like that 724 and duals😂😂😂😂

[@nicov8770]

Why you dont by the new 728? They have a loader an they have the new Agco engine. But the 900 is nice, but i love the 700, becous i´m from Germany in Bavaria.

[@Josh-cz8wb]

How do the sisu motors in the red ones go in the cold? Made in Finland so you'd think they would be reliable in the snow.

[@halwilliams1682]

Great looking Fendt. Congratulations on the purchase.

[@maciejchabier2061]

Mike please. Fendt guidance on RTK and Novatel receiver works a lot better than the JD. It’s just doesn’t compare. You should try it. I’m sure that You will agree with me. I know What i say. Put a lot of hours with Fendt guidance Last two years. It’s unbeatable.

[@rdekort9273]

Good choise 👍🏻

[@dennislamers986]

Another big house in the stable. Mayne the loader tractor will be RED.

[@martijnderu9115]

This Fendt is the real deal 🙂

[@jaymcclure7328]

You can get a aftermarket for a 942 so I’m sure you can get one for that one

[@davidkimmel4216]

Thank you for sharing your thoughts on this tractor.

[@johnmorgan4017]

I wonder if they make combo telehandler big enough for grain bag handling. They advertise tele handlers in Europe with pto and 3 points.

[@delbutler885]

Sure they make Telehandlers with big buckets that are waaay better for cleaning up grain bags and they can be moved on a gooseneck trailer.

[@johnmorgan4017]

@@delbutler885 yea the ones I’ve seen a few videos on have hitches and pto’s. But if it has enough power to run the baggers idk. They would want 1 machine to take not a loader and a tractor.

[@jespercarlsson791]

Fendt 728 loader whith the new engine from Finland

[@richardsmyth8088]

You can fit a loader to the 900 fendt

[@KevinChristiansen-i2q]

Great video Mike

[@simonstaples8784]

Those Fendts really are reliable 👍👍

[@RCMechanicalEngineering]

Nice Fendt💪

[@kerryrouse9039]

Merry Christmas Mike and crew.

[@danielbottcher6779]

Maybe it's possible with a Quicke front loader Q98 which is for tracktors from 250 hp upwards

[@mickaelbissec7178]

Those fendt look bada$$!!

[@patrikfalk5684]

I wonder what fendt has done to the deutz engines, i drive a fuchs material handeler at work with a deuts 6.1l comonrail. One was pre emissions and the one i have now has AdBlue. Both of them starts like they are warm down to -25 celcius. An with ease even colder. Has only been -31 as coldest... Makes you wonder .. The newer one is year 2021