Another massive load of nail gun powertools in for repair. Paslode, Rawlplug, tornado amd Tjep.

[@austenj4539]

I enjoyed that phoenix repair on the oxidised Paslode with gas dated 2009!

[@daig1984]

Me 2! Somethings just want to be saved

[@Quietvibes07]

That’s a testament to paslode that a gun that old can be serviced & able to work again. (Although you are probably the best at getting things working properly). Well done.

[@simonbates9779]

Amazing to see that old rusty gun working again. Well done

[@liftrucs]

I think we should send you 5 loaves and 2 fishes Dean, a miracle.

[@p3psikola15]

Now this is the stuff we love mate.!.!!! Much love from the U.S. please don't stop making these videos we need this kind of stuff in our lives..! You're the best my guy don't stop being a complete unit of the male figure you beast!!.😊

[@andybrown9427]

That corroded Paslode, talk about resurrecting the dead. Nice one Dean.😎

[@paulcollin1398]

That old paslode was a good fix 👍👍

[@Zyklonaire]

Incredible 2nd life for the 2009 rusty paslode ASMR.

[@CezaryAkakios]

I really like these extended length videos, good job on the repairs.

[@aydenandchase7220]

Needs fixing, and a service, great description 😂😂😂

[@Yes_buh]

Maaaate mad skills bringing that old girl back from the dead!!!

[@Justicesdad]

Thank you for sharing what I am watching fir the 2 and a half hours

[@1978JonBullock]

Fair play getting that paslode up and running again, She looked ready for the parts bin.

[@leonardpaciora5039]

Fantastic video Dean , Keep them coming!! Thanks!!!!

[@cinderswolf3929]

amazing job dean well above and beyond

[@robertdestefano4619]

Nice job on that first paslode still can't believe it had spark ...lucky customer

[@simonmuschamp4582]

€22 for an O-ring thats actually a pingin worth of rubber. Outrageous! Nice resurrection on that rusty one 👏.

[@deandohertygreaser]

Thanks 👍

[@Enoch-powell]

Thet was a long one. Love it.

[@jacktissington]

Think im going to have to service my spit 27e myself after watching this looks easyish

[@michaelfairchild]

Nailers fixed in this video: 0:50 Rawlplug R-WW90 (possibly) nailer Fault: Stops firing after one shot 9:40 Tornado CN-120 concrete nailer Fault: Nail jam (according to the owner) 12:43 Paslode IM-350 nailer Fault: Tool been in Davy Jones locker at the bottom of the sea 48:18 Paslode IM-360 nailer Fault: Not firing 57:48 Paslode IM-360 nailer Fault: None, just service 1:16:40 Makita GA9040S grinder convertion to a Wall Chaser tool 1:28:28 Paslode IM-360 Fault: Not firing 1:47:51 Tjep TF-16/64 (possibly) nailer Fault: Broken pin 1:53:35 Paslode IM-350/90 Fault: None, in for service. 2:03:02 Return of the Paslodes IM-360 from 48:18 and 57:48 after parts came in.

[@Justicesdad]

Pin this dean

[@jameskalbfell1507]

That was amazing

[@deandohertygreaser]

Thank you

[@gaffenz1137]

perfect friday night watch

[@juliadellafranca6922]

Go champ!❤ love your work

[@Zogg1281]

I know I watched you fix that 1st Paslode, but I still can't quite believe that you got that thing back in working order!?!?!?!?!? I do feel a profound sorrow for your parts washer after washing that lot into it 😢 Its probably wondering what it did to annoy you so badly that you would wash something like that in it 😂😂😂😂 Amazing job, Sir!!!!! 👍👍👍👍👍👍

[@Meraj-zr2ry]

On that sparking PCB. I suspect they are Photo Coupler Sensors. LED on one side and Photo Transistors on the other. Commonly used in the electronics industry.

[@prasadvn524]

Great job

[@plunder1956]

That first Paslode looks more like archaeology. Perhaps a week in a tank of Evaporust might help.

[@hb9836]

a miracle worker dean of lost causes.?

[@michealwilliams5639]

Just wanted to know how long have you been repairing this equipment? You do a great job of explaining your repairs.Great job

[@deandohertygreaser]

A few years now

[@iandalton3839]

On those 360s, wouldn't it be a benefit to take the back off and put a few drops of oil down the chamber every so often? Actually you said as much later in the video, on the last one that had the new spark unit.

[@fredholmes6284]

Av just seen Screwfix are selling the new Erbauer 18v-18 gauge nail gun just came on the market (150 quid)

[@jameshendrix8217]

Hey Dean for the older style paslode o-rings, the hitachi NR90GC o-rings fit and they're half the price

[@deandohertygreaser]

Very good point, you are right.

[@jameshendrix8217]

@@deandohertygreaser and I think the makita gas gun orings fit as well, but they are more expensive than the hitachi but still less than the paslode.. Anyway I use the hitachi orings to fix the older style paslodes because paslode prices are ridiculous.

[@thedevilinthecircuit1414]

That first Paslode looks like it was dropped in the pond, fished out, and laid up on the shelf. I'll bet it was found in a skip.

[@adl2005]

What do you clean the tools with.

[@ElMariachi1337]

I would have given up on that IM350 the moment I opened that back cover, that much corrosion on aluminum is just crazy. But respect for getting it up and running again! Also what parts you need for the Senco's ? I work at a Dutch hardware store that does service/repair Senco machines and we can order straight from Senco NL so I might be able to help you out on a one time base to get you the parts for the machines you have laying around. Tjep is a whole different story though, they only have standard service kits (o-rings/seals) but nothing like fire pins or any of that stuff.

[@deandohertygreaser]

Thanks for the offer, very much apprivated. But I need a supplier here in Ireland. The tjep and senco are basicly the same gun. Most pasts will be interchangeable

[@richiedillon3269]

Nail guns always work until your up on a roof holding up a piece of timber above your head and all you need is to just tack it. 😂

[@jp5210]

What kind of hammer is that your using ?

[@andygardiner6526]

When will your nailer test board get weighed in for scrap? :-)

[@wiktorzyca83]

First 😀 Good Morning everyone 😉

[@svanclee]

What's the difference between IM360 and IM90 ? The nails ??

[@Jefferrey1]

Hey Dean, why don't you require people dropping off tools to leave a description?

[@hb9836]

cant believe someone put that in for repair, it's an insult!

[@cinderswolf3929]

can you turn water into wine next

[@sandalhq]

Get the feeling that first Paslode was used by Noah to build the ark.

[@patrickmcdonagh381]

Securall fastenings Dublin for the tjep

[@deandohertygreaser]

Must check them out

[@xtender5]

Cold as a what? 😉

[@NorroTaku]

cant one make o rings oneself?

[@jasonlib1996]

22 EURO! for a tiny bit of rubber that costs literal pennies to make. that's criminal. Even with the overhead of supplying it as a single item in a plastic bag, shipping it, stocking etc. There is no way that part should cost more than €5.

[@jmswilliams70]

tbh senco is crap anyways. i don't think any one uses them anymore. the last senco gun i used was the 701 and was absolute junk that just fell apart.

[@northcanterburylogging3039]

If Senco don't supply parts and service but sales. Then the sale of Senco products should be banned pretty simple un warranty and service laws.

[@rbedwar12]

N9 sounds

[@deandohertygreaser]

Needs to finish loading up

[@cralee6892]

Rawl looks same a Hilti gx 90

[@gutsngorrrr]

The upload has gone wrong, the video size is stamp size and it has no sound

[@Matt-ns2ty]

Same for me

[@fihsy40]

Photocell.. immm

[@richiejames928]

A shame paslode never invested in battery guns before everyone else did. gas guns are the last of a dying breed these days. shame really as paslode made the best gas guns….they should of by rights made the best battery guns too but they where asleep at the wheel.

[@sauceless6666]

16 year out of date gas lol

[@pauloffthewall6367]

No sound

[@Matt-ns2ty]

Same

[@BurnzyXXD]

i have sound but 360p quality

[@deandohertygreaser]

Not finished loading yet

[@Irilia_neko]

It's an infrared barrier, generally Way more reliable than an electric contact, but you have to consider the electricity consumption of the infrared led, + the product need to be designed correctly to avoid dust and/ humidity/ corrosion.. .

[@deandohertygreaser]

They are not designed to be used in power tools like these. A tried and tested electrical switch would be more reliable. These are not very well designed as they they are a common failure in these guns.

[@electrickal1]

I could repair those IR switches, they could easily be sorted and save lots of money on buying new ones.

[@Irilia_neko]

@@electrickal1 I never said it's not possible 😉

[@rbedwar12]

No sound