Answering questions about about using my Janome HD9 sewing machine to make a handbag.

I was asked so many questions about how I used my Janome HD9 sewing machine to make my handbag with beautiful rose gold features and hardware for one of my lovely customers.
Common questions I was asked were:
❓What thread I used.
❓What size needle I used
❓What settings I used and how I threaded my Janome HD9
❓And one of the most popular ones was.... Will I be releasing my handbag sewing pattern
So if you'd like to know the answers to these questions then you might like this video.
If you have any other questions feel free to leave them in the comments section and I'll be happy to help answer them for you.
Here is the link to where I bought the Janome Adjustable Seam Guide for the Janome HD9
www.ebay.com.a...
#JanomeHD9
#SewingHandbags
#MakingBags

[@ChrisLucasDesigns]

If you are looking for the adjustable seam guide I’m using in the video. Here’s a link to the Janome dealer I bought mine from. I also bought my machine and feet from them as well and they do ship worldwide. www.ebay.com.au/itm/Janome-Adjustable-Seam-Guide-Janome-1600P-HD9-Professional-DB-Hook-Models-/293421670691?_trksid=p2385738.m4383.l4275.c10

[@elainestephens5906]

Thank you. I see you were using the Janome HD9BE, yes? I just bought one, and it was shipped to me. It clanks as I sew - so frustrating - it is oiled and the needle is correctly installed. The bobbin is loaded per video tutorial made by Janome Junkies, and also the bobbin in loaded into the machine per video tutorial. Any ideas you may have regarding what is clinking (as the needle goes DOWN), please advise.

[@ChrisLucasDesigns]

@@elainestephens5906 Sounds like something is either going on the top part of the machine or the bottom bobbin section… depends where the sound is coming from… top or bottom section. Could be something misaligned somehow. Also might be worth checking in the bobbin area incase there is a stray loose thread somewhere in there that is catching on something. Other than that I would phone a sewing machine service technician and see if they can help you and suggest other possibilities and fixes for you. I’m more of a drive the car and have the service technicians do fixes for me kinda person.

[@saskiaeradus3551]

Hello, I'v just bought this machine, it will arrive on Friday..I'm thrilled to learn everything from this machine😊 I'll hope the bobin will succeed to put in/out.. I'm a Dutche, live in the Netherlands and nearly became an Aussie in the 50ties..my oncle died, lived in Sydney..his fam lives somewhere in Australia..so, as an 'nearly Aussie 😊' my interests in manny things from Australia will stay..also with this machine...and your learnings..thank you😊

[@ChrisLucasDesigns]

Hi and I’m excited for you and I’m sure you’ll have no problems getting the bobbin in and out. And thank you for sharing your ‘nearly Aussie’ story 💕

[@williamaustin4422]

It's absolutely the best review I've watched, and I've watched many. You're marvelous! I am subscribing right now! Many thanks, Jo Ann

[@ChrisLucasDesigns]

Glad it was helpful! And thank you 🥰

[@donnahawk]

I would love to learn more about process of setting the tension

[@ChrisLucasDesigns]

Sorry but I no longer have this machine as I sold it to make room for another industrial walking foot sewing machine to sew thicker materials including leather.

[@annjelley5363]

Lovely! Thanks very much. I will try your method of threading on my HD9 - I haven’t done that yet! Keep up the good work-your bag I’d beautiful!

[@ChrisLucasDesigns]

You’re welcome and thank you 🤗

[@sandyvass1173]

Thanks Chris for all the great tips

[@ChrisLucasDesigns]

You’re welcome Sandy 😃

[@moiraheit166]

Thankyou for your wonderful tutorial. I unpacked my new HD9 last night, and was pulling my hair out trying to work out proper settings. You have come to my rescue 🤗

[@ChrisLucasDesigns]

That’s great! Glad I was able to help. Congratulations on your new HD9 sewing machine 🎉

[@DianaHarveyClark]

I have this machine & I have it all to learn so thank you for sharing this video!

[@ChrisLucasDesigns]

You’re so welcome Diana and enjoy your new machine. I’m sure you will love it 💗

[@ladypinkbagsetc.9116]

I have the Janome 1600P DM. It is an awesome machine and it sews through vinyl and leather like butter. I have been debating On a walking foot machine for my bagmaking but for now this does exactly what I need. Great video and I love your channel!

[@ChrisLucasDesigns]

That’s great! I’ll keep going with your Janome 1600P DM until you really know you ‘NEED’ a walking foot machine. I ended up buying an industrial walking foot machine but only because I started selling more leather bags and wanted the ease of sewing over thicker seams of the leather. I also invested in a leather skiving machine but again only when I felt I had come to the stage that it was going to be worth the investment of funds and also space in my sewing room too. Oh if only we could have our dream size sewing rooms and all the machines we’d love to have on hand 😂. Oh and thank you for your lovely compliment too 🥰

[@ladypinkbagsetc.9116]

OMGoodness it has been an entire year already! I have added an Adler 372 walking foot machine for ease of use since my sales have been increasing. You are such an inspiration to me Chris!🙏🏽💖

[@roxannericchio3556]

Thank you so much for this video. I have had my machine for a year now and haven’t attempted the thicker threads. Now I will!

[@ChrisLucasDesigns]

You’re very welcome Roxanne and I’m so glad you’re going to give thicker threads a try now 😆 Our Janome HD9’s handle thicker threads and thicker fabrics and materials with ease. I actually use my Janome HD9 more than I use my industrial sewing machines now and as a bonus the HD9 takes up way less space and I can move her around when ever and where I like.

[@janicewebb562]

Looking forward to your pattern release! Beautiful design.

[@ChrisLucasDesigns]

Thanks Janice and I’m looking forward to sharing it with you 💞

[@blod9uk]

I found that very helpful thank you. I’ll keep a look out for your patterns

[@ChrisLucasDesigns]

That’s great I’m so glad you found it helpful and I’m looking forward to sharing my pattern and a video sewalong too 🤗

[@anneg5786]

Thank you so much. Just ordered this machine, so your tips are great!

[@ChrisLucasDesigns]

You’re welcome and I hope you love your machine as much as I’ve love mine 💗

[@isakgriffiths]

I have m no sewing about two tours and just stumbled across this video and your youtube channel. I’m looking forward to your tutorials, but I’m also interested in your patterns for bags like this. (I don’t see anything like this bag or your sew along bags on your website.) could you point me in the right direction?

[@ChrisLucasDesigns]

Hi 👋 for this pattern you can use the measurements I used or you can make them smaller or larger, longer or wider. Once you’ve made a couple I’m sure you’ll be confident to have a go at making different sizes. At this stage I have only published my reversible tote pattern. Thanks for your question.

[@Annpanz]

Thank you for sharing your knowledge with us xx

[@ChrisLucasDesigns]

It was a pleasure Anne 😘 🤗 and looking forward to sharing more with you 😆

[@danahoward759]

Thats a beautiful bag

[@ChrisLucasDesigns]

Thank you Dana 🥰

[@MsHighpeaks]

So useful thank you very much. Just bought this machine, building up to taking it out of the box x

[@ChrisLucasDesigns]

You're welcome and enjoy your new sewing machine 😀

[@maryshaver129]

Thank you, as always! Hugs

[@ChrisLucasDesigns]

Sharing is caring 😆 🤗 🥰

[@cathryncoate2167]

Perhaps a stupid question, but is it easy to do the top stitching around the top of the bag with the Janome? Presumably it’s done when you’ve put it all together. The bag is beautiful.

[@ChrisLucasDesigns]

Yes, the top stitching is done after completing the bag. When I need a little extra space like a free arm machine I just I just prop the machine up on some large books 📚 or you can let your machine sit a little over the edge of your table so you can use it like a free arm machine… crazy I know but it works 😃

[@Byangelinamaria]

Thanks for the Video...:)

[@ChrisLucasDesigns]

You’re very welcome and I’m glad it helped 😃

[@AidaReva]

I need that bag pattern, how gorgeous! Where can I buy it?

[@dianachong4088]

Beautiful top stitching! I still find it challenging to get consistent, straight topstitching without skipped stitches. Are you using an extension table for making bags?

[@ChrisLucasDesigns]

Thank you. I can be a challenge at times with different materials and varying thicknesses. Sometimes I would lift the machine onto something higher so that I could use the end of the machine like a free arm, and sometimes sew the top stitching from the inside of the bag as that can also make it easier. I know have industrial machines including a walking foot machine and a cylinder arm as I work with a lot of leather now also.

[@dianachong4088]

@@ChrisLucasDesigns Thank you for the tips! 👍

[@ChrisLucasDesigns]

You’re welcome and hope they help you with getter straighter top stitching 😃

[@paulinebennett-tamati3556]

Thanks Chris, that was really helpful. Love your bag and will look out for your patterns :)

[@ChrisLucasDesigns]

You’re welcome and thank you too 💕

[@jeroengrobben7555]

Thank you for posting this. I saw the bag you made on the HD9 facebook group. What a wonderful design.

[@ChrisLucasDesigns]

You’re very welcome and thank you 😊 If you think this might help anyone else who has a Janome HD9 please feel free to share the video with others. Actually I’d appreciate it if you did. I’ll also be posting more videos on how to make this bag when I publish the pattern 😆

[@barbarafrangella796]

Thanks for all the helpful advice on the HD 9 just got mine a week ago...since this video is dated 11.20 what is the bag pattern in the video LOVE IT...Thanks Barb

[@ChrisLucasDesigns]

Congratulations on your new machine Barbara and I’m so glad you found my video helpful. Unfortunately I’ve haven’t yet published my pattern as I’ve been busy with bag orders which is a good thing but has delayed my timeline for publishing my pattern. I still will be publishing it though so be sure to subscribe to my channel as then you’ll know when it does come out. Thanks 😃

[@barbarafrangella796]

@@ChrisLucasDesigns Thanks I am a subscriber and will definitely watch the new pattern release....Thanks again Love your channel...Barb

[@ChrisLucasDesigns]

You’re such a gem 💕 thank you ☺️

[@janicewebb562]

Thank you so much. Very clear and concise information. I'm curious about your presser foot and edge guide. Are they janome brand or where did you get them? Any guidance is appreciated.

[@ChrisLucasDesigns]

Hi Janice yes they are the Janome brand I use and I bought mine from my Janome dealer. Here’s link to the adjustable seam guide I bought and you’ll find all the other feet and attachments they have for our HD9’s there. They do ship worldwide. If you have a closer or local Janome dealer at least you’ll know what you to ask for or what you are looking for. Hope this helps www.ebay.com.au/itm/Janome-Adjustable-Seam-Guide-Janome-1600P-HD9-Professional-DB-Hook-Models-/293421670691?_trksid=p2385738.m4383.l4275.c10

[@pamelamedeiros6011]

Where did you purchase the adjustable seam guide that attaches to the machine verses being part of the foot. Thank you.

[@ChrisLucasDesigns]

The link is in the first Pinned Comment and I’ve just added it to the Description Box. And to make it easy for you here’s the Link for you too 😃 www.ebay.com.au/itm/Janome-Adjustable-Seam-Guide-Janome-1600P-HD9-Professional-DB-Hook-Models-/293421670691?_trksid=p2385738.m4383.l4275.c10

[@marthaholloway7263]

I recently purchased an HD9 so thoroughly enjoyed your video. Could you tell me if the edge guide you have on your machine is from Janome? I asked my dealer and he could not find it. I would love to add it to my machine. Any help you give me would be greatly appreciated. Thank you.

[@ChrisLucasDesigns]

Hi Martha the link to the seam guide attachment is in the pinned comment under the video. It's the very first comment. I hope this helps. And thank you 🤗

[@sherris6537]

Beautiful bag. Does the HD9 allow for the needle to be adjusted left or right. I read something in the specs that might have suggested otherwise.

[@ChrisLucasDesigns]

Sorry I missed your question earlier. No the needle can’t be adjusted, it’s fixed in place.

[@elainemorgan2336]

Hello Chris , when are you releasing your patterns , and could you direct me , when available, thank you

[@ChrisLucasDesigns]

Hi Elaine, I’ll be starting to release my bag sewing patterns over the next couple of months 😆 Be sure to subscribe as I’ll be sharing my pattern releasing here on KZbin as well as releasing more sewing tutorials and sew with me videos too happy 😃

[@marystewart4994]

Thank you thank you for your video on threading this machine! I am having a frustrating time learning how to thread this! What weight is the Tex 45 thread? That’s what I have right now-

[@ChrisLucasDesigns]

You're welcome Mary and I'm glad you find my video helpful. A tex 45 thread should work great with your machine and a size 14 or 16 needle should also be a good size for that size tread. You'd need to do a google search to find out the weight which is what I normally do too.

[@TheMoondustAngel]

Hi Chris, it's a fabulous video, thank you for sharing. Could I ask where the edge guide was purchased from please?

[@ChrisLucasDesigns]

You’re welcome and this is where I bought my seam guide as well as my machine and other attachments from. I actually went into their store to purchase mine. They are in Brisbane (Australia) but do ship worldwide. Also this will give you all the details about the attachment so you know what to ask for or look for at your local Janome dealer if you have one you like to buy from or is closer to you. www.ebay.com.au/itm/Janome-Adjustable-Seam-Guide-Janome-1600P-HD9-Professional-DB-Hook-Models-/293421670691?_trksid=p2385738.m4383.l4275.c10

[@sloppyjoe3617]

Thanks for this video. I'm glad to see that my settings are almost identical to yours for bag making! Do you ever use the thread cutter? I was told never to use it on heavier thread, so I don't, but it seems strange to me that they would make a heavy duty machine but not a heavy duty cutter.

[@ChrisLucasDesigns]

I tried the thread cutter on all my different threads and it definitely didn’t like cutting the heavier weight threads. It’s more a machine designed to sew the occasional heavier weight threads and mainly designed as an alternative to an industrial straight stitch sewing machine better suited to sewing clothing and quilts etc. I did find I needed to upgrade to an industrial walking foot sewing machine for my bag making as my handbag business has grown and I needed something that could handle sewing leather and thicker machines on a more regular basis. Don’t get me wrong though I loved this machine and if I didn’t already have an industrial straight stitch sewing machine I would have kept this one for sure. Unfortunately my sewing space can only handle so many sewing machines 😂

[@ltyrell405]

I recently bought the HD9 and am struggling to sew in the round ie items like top stitching around the top of a bag because the HD9 doesn't have a free arm option, how do you get a good finish this way, is there a technique you can share?

[@ChrisLucasDesigns]

I just prop the machine up on some large books 📚 or you can let your machine sit a little over the edge of your table so you can use it like a free arm machine… crazy I know but it works 😃

[@ltyrell405]

@@ChrisLucasDesigns Wow great suggestions, how resourceful thanks!

[@ChrisLucasDesigns]

You’re welcome xx

[@geriedwards4028]

Thank you for such a clear video with so much info. Could I just ask if you are using the same thread in your bobbin and if you then had to adjust the tension on your bobbin case because the thread is a heavy one?

[@ChrisLucasDesigns]

Hi Geri yes I used the same thread in the bobbin (I should have mentioned that sorry) and I did adjust my bobbin case just slightly some time ago to handle the thicker threads. Maybe that’s another video I could share on how I adjust and test the tension of my bobbin case. I probably only turned the little screw about 1/4 turn. One idea before turning the little screw is to use a marker to mark where the screw is before turning it just in case you want to turn it back to it’s original position at a later date. And thank you for your feedback and question too 💗

[@geriedwards4028]

@@ChrisLucasDesigns I think a video on adjusting bobbin tension would be of great interest - it appears that quite a few folk have an issue with getting this right x

[@ChrisLucasDesigns]

@@geriedwards4028 I’ve added it to my list of videos to do. I’ll make it a dedicated video and there’s a few tips I can share about adjusting our bobbins. Thanks again Geri 🤗

[@karendeascentiis9468]

Your bag is beautiful! With so much structure to it, how do you birth it?

[@ChrisLucasDesigns]

Thank you so much ♥️ With this bag I used the drop in lining method so I didn’t have to turn the bag through the lining. I also love the drop in lining method so as I don’t need to squish structured bags. I do at other times use the regular method for sewing in the linings and then turning them.

[@karendeascentiis9468]

@@ChrisLucasDesigns I have only done 1 bag with drop in lining. I'll have to look for other patterns or figure out how to convert the ones I have. Thank you

[@ChrisLucasDesigns]

@@karendeascentiis9468 you’ve given me another idea for a tutorial I can share here on my channel. I’m more than happy to share how I do my drop in linings if you like?

[@karendeascentiis9468]

@@ChrisLucasDesigns That would be terrific! Thank you

[@ChrisLucasDesigns]

@@karendeascentiis9468 Yeah looking forward to sharing this one 😃 it’s a great method for when we’re sewing bags with more structure to them.

[@CLCUTSHALL]

I have just purchased the same machine. Do you change needles and all your tensions to sew the lining ( my lining is fabric and bag is faux leather. Or do you sew that on a different machine?

[@ChrisLucasDesigns]

Congratulations on your new sewing machine. When I had this machine I use to use the same needle while making a bag and adjust tension as needed. I use to find in most cases what ever needle I chose for the exterior materials also worked for the lining as well. I only sold my machine as I upgraded to a couple of industrial machines and no longer had the space for all the different sewing machines I had.

[@haidenzeroonesix5939]

Did you try tex 135 (tkt20)? I know tkt30 work but would be nice if it work with 20 for the looks 😊

[@ChrisLucasDesigns]

I didn’t as I never found the need for that weight of thread to achieve the top stitching looks I like even when using my industrial walking foot or cylinder arm machine

[@ToniScatesJordan]

Is the seam guide a janome product?

[@ChrisLucasDesigns]

@@ToniScatesJordan it is and here’s the link to where I bought mine from www.ebay.com.au/itm/Janome-Adjustable-Seam-Guide-Janome-1600P-HD9-Professional-DB-Hook-Models-/293421670691?_trksid=p2385738.m4383.l4275.c10

[@adamnarat9677]

Thanks so much for the video. So you think the hd9 could sew sheepskin?

[@ChrisLucasDesigns]

You’re welcome Adam. The HD9 can sew sheepskin leather and I would highly recommend using leather needles and also a walking foot or at least a teflon foot and probably release the foot pressure if you find the the leather isn’t feeding through smoothly from the top. If you plan on sewing different types of leather in the future then I would recommend an industrial walking foot machine as it will handle sewing thicker types of leather. Leather especially sheepskin leather tends to stretch quite easily when sewing especially if it’s not stabilised with a fusible stabiliser. I often use decovil light to stabilise different leathers to both help add strength, structure, and durability of the leather if it’s for bags. Hope this helps.

[@adamnarat9677]

@@ChrisLucasDesigns That's really useful. Thanks! I'm planning on sewing a lot of sheepskin, so I believe what you're saying is that whilst the hd9 can sew sheepskin, I'm better off getting a walking foot industrial machine for sustained sheepskin sewing.

[@ChrisLucasDesigns]

I would definitely go the getting an industrial walking foot machine going by your plans. The prices are very similar and the industrial has more power and I think durability as well. Plus the accessories for the industrial machines are cheaper than they are for the HD9. Eg bobbins are way cheaper for the industrial machine as well as the different attachments too. Also the bobbins are bigger and you can use the bigger thread spools and thicker threads as well. I ended up selling my HD9 (even though I loved it) but I wanted to sew a lot more leather and I bought an industrial walking foot machine and don’t regret it. Now comes the fun part for you of researching industrial machines LOL. Have fun shopping for your new machine. At least you’ve got a better idea of which kind of machine will be the better machine for your sewing needs.

[@adamnarat9677]

@@ChrisLucasDesigns Brill. That's made my mind up. Thanks Chris!

[@ChrisLucasDesigns]

@@adamnarat9677 Happy to help and to save you $’s in the long run by getting the right machine to do the job you want it to do.

[@roxannericchio3556]

I watched the video from Janome on thicker threads. It states polyester thread. I purchased bonded nylon a while ago. Can I use it? It’s a bonded nylon #69 Tex 70, or is that too thick?

[@ChrisLucasDesigns]

You sure can Roxanne. I have used both. Just give it a test and see how it goes. If the thread shreds then you may need a bigger needle. And you may need to adjust the tension (the little screw) on your bobbin case if the thread isn’t feeding through the bobbin easily.

[@kivamahatma9817]

Hi my name is Kiva. I was hoping to ask you a question about sewing machines. You have the hd9 and multiple industrIal sewing machines. I have a walking foot machine already. I am trying to decide between the Juki 8000a and the Janome hd9. My question to you. Is the Janome hd9 enough since I already have a walking foot sewing machine. If I needed a portable sewing machine I do own the Brother tough and strong st 150 hdh. It’s not anything fancy but it’s portable. I don’t have the funds to get the hd9 to then find out it’s not enough when it comes to bag making. Please any advice on your experience would be gravely appreciated. Thanks

[@ChrisLucasDesigns]

Hi Kiva, if you are sewing mainly with vinyl and/or leather than the semi industrials such as the Janome HD9 is not the best option especially as you already have a walking foot machine. A walking foot machine is definitely the best type of machine for bag making and being able to sew with thicker threads and materials.

[@memeyers1962]

How does the HD9 do on thicker seams easily? I’m considering getting one myself.

[@ChrisLucasDesigns]

Really depends on the thickness of the materials you are using and how many layers and whether you are stepping up from say 4 layers to eight layers. With fabric it can handle it easily and even denim but when it comes to jumping those layers with thicker vinyls and leather then I would recommend an industrial walking foot machine for sure to help eliminate the risk of skipped stitches when stepping up onto and off of those thicker layers. Plus there is not much of a price difference either. So it may come down to the types of materials you are using, space, and portability.

[@memeyers1962]

@@ChrisLucasDesigns thank you for the reply. I do sew with vinyls and thicker fabrics. I was going to buy the HD9, but now will look at a stronger machine. Sewing store said it would be good enough, but I bought a machine before that they said would work and doesn’t do the thicker fabrics & vinyls.

[@ChrisLucasDesigns]

@@memeyers1962 definitely go for an industrial walking foot machine for those vinyls and thicker machines Mary especially when you have already tried other domestic machines. You’ll never regret getting an industrial walking foot machine especially if you have the space and plan on continuing to work with heavier materials 🤗

[@randiharris6194]

Hi! Love the video. I bought the 70wt for prettier top stitching but cannot figure out the tension!☹. What number did you use? Thank you!

[@ChrisLucasDesigns]

Hi Randi. If you have another scan through the video you’ll be able to see the tension settings I used for this thread. Don’t forget too you many need to adjust the tension on the actual bobbin for the weight of thread you are using as this can make a big difference too. The heavier the weight of thread the looser you would need to make the bobbin so the thread isn’t too tight coming from the bobbin. Sorry for the late reply too... somehow I missed the notification.

[@randiharris6194]

@@ChrisLucasDesigns thank you so much!!❤

[@joellenpeterman9729]

What foot is on the HD9 in this video? Is that the foot you typically use for making bags? Thank you

[@ChrisLucasDesigns]

I was using the narrow toe foot that came with my machine. I quite liked this foot for topstitching and for applying zippers too.

[@joellenpeterman9729]

@@ChrisLucasDesigns thank you. Do you think this foot would be ok for making piping?

[@ChrisLucasDesigns]

@@joellenpeterman9729 A better option would be to use a zipper foot so you are able to get the stitches closer to the piping. Alternatively using a piping foot. The most important thing when sewing and attaching piping is to get your stitches as close as you can to the piping especially when encasing the piping between the two layers of the materials. The closer you can get to the piping the neater end result you will get. I hope this helps 😊

[@joellenpeterman9729]

@@ChrisLucasDesigns thank you🙂

[@lynnewatson1984]

do you have the list of supplies and the arm that keeps the sewing line straight

[@ChrisLucasDesigns]

Hi Lynne, I don’t have a list of supplies but there is a link in the pinned comment for the seam gauge attachment I used.

[@patricialara2539]

Do you have a video of a walking foot for this machine?

[@ChrisLucasDesigns]

This machine didn’t come with a walking foot.

[@patricialara2539]

Thank you! I ordered the walking foot for the machine and I was able to sew with it. Thank you!

[@ChrisLucasDesigns]

That’s great 😀

[@traceysantierre4415]

Do you put the same thread in the bobbin? Also do you use the tex 80 for construction pls? I’m having an awful time with my new HD9 😔

[@ChrisLucasDesigns]

I always do Stacey as I find I get better results. Also check your bobbin case tension is set right to allow the thread to release from the bobbin it’s self correctly. The actual bobbin case it’s self can be adjusted for different weight threads. It can be hard getting to know a new machine. If you do a search on Facebook there is a Facebook group for Janome HD9 users and I’m sure you’ll find some extra help there as well. Plus you can share photos etc of the specific issues you are having in the group. I hope this helps a little for you and I know how frustrating it can be getting to know a new machine and what it likes and doesn’t like. 🤗

[@traceysantierre4415]

Yes I’ve joined the group snd so many people are having the same problem as me 😔. I’m so upset with the machine. Thank you for your reply I’m going to give your info from video a go. ❤️

[@ChrisLucasDesigns]

@@traceysantierre4415 Hopefully you’ll be able to get your machine working for you 💜

[@elainestephens5906]

WOULD LOVE TO KNOW WHEN YOUR PATTERN IS RELEASED !

[@ChrisLucasDesigns]

I’ll be sure to share a video intro here on my KZbin channel for you Elaine. Stay tuned as I have more videos related to making bags coming your way 😆

[@Soralella71]

What is the name of that edge guide that you have attached to this machine please? I would like to buy it. Thank you.

[@ChrisLucasDesigns]

The link to the seam guide is in the pinned comment under the video. It’s the very first comment.

[@Soralella71]

@@ChrisLucasDesigns Fantastic, thank you. Sorry I didn't notice that comment.

[@julialusk3888]

Can you show what your large cone of thread is sitting on please.

[@ChrisLucasDesigns]

I just had it sitting on the thread spool holder on the machine

[@elenaraducanu1991]

Great tutorial! Thank you so much for this - it was well needed :). Do you use the same thread for bag assembly as well?

[@ChrisLucasDesigns]

You’re welcome and thank you. I do tend to use the same thread for the construction of the bag as well as it’s nice and strong and holds up to lots of wear and tear.

[@Kristina-cs1no]

Is this bag pattern available yet?

[@ChrisLucasDesigns]

Sorry it’s not yet… but will definitely be coming this year ✅

[@sewingmachinesindetail]

Thank you for this video. I noticed your setting to 0.5 regarding down force on presser foot and it is 1/10 of full scale of 5. I noticed, that Janome actually have specified the max down force on presser foot to be 11 lbs or 5 kg. It is to me a very high value. I have sewn a lot of heavy vinyl and webbing with Tex 135 thread and did not need more than 3 kg or about 6 lbs. down force on presser foot. In manual for the HD9 it states a setting to 1 for very light fabrics - but you use 0.5 for bag making :) I think I trust you more on this issue. I guess that a setting of 0.5 would be a downforce of about 1 lbs. Did you ever try heavier threads than Tex 70 with this machine?

[@ChrisLucasDesigns]

Great detailed info thanks for sharing that. I did try quite a few different threads with this machines and found that most worked quite well. The main thing is using the right size needle to suit the size of thread being used. I have since upgraded to an industrial walking foot machine as I have been sewing lots more leather bags as my business has grown quite a lot since I posted this video. I did really love this machine though.

[@haidenzeroonesix5939]

@sewingmachinesindetail do you mean that you sew with tex 135 (tkt20) on HD9? Does it work fine?

[@ChrisLucasDesigns]

No I didn’t find the need for that size weight of thread.

[@ChrisLucasDesigns]

If you have the need for that size of thread my recommendation would be that you need an industrial walking foot machine

[@sewingmachinesindetail]

@@haidenzeroonesix5939 No, I do not have the HD9. But I would like to know somebody, that did try perhaps Tex 90 thread on the HD9. I think you like some answers about that too. An industrial combined feed walking foot machine is of cause a better machine for the a job with Tex 135 thread, but it do also need space and skills to operate. Some of the household vintage sewing machines are able to sew Tex 135 thread reasonable, if you modify them a little. But household machines are not made that durable like industrial machines. I have sewn about 2500 meters of Tex 135 thread with a Singer 201K (with a few small modifications), and I have seen no signs of wear yet.

[@Jckay2003]

Can you comment - do you miss not being able to adjust the needle position? Does the machine come with a free arm and extension table? If not, do you miss these features when making handbags?

[@ChrisLucasDesigns]

I never missed being able to adjust the needle position as I don’t often use that feature on my other domestic machines. As for a free arm I use to prop the machine up on a little storage case which raised the machine giving me a free arm. I did end up selling this machine and bought an industrial walking foot machine which actually suits my needs better as I sew a lot and wanted something a little more industrial. This machine sews beautifully though. I also have an industrial straight sewer and a leather skiving machine as well as my domestic machines. If I had of had the space to keep this one I would have 😂

[@imogendymond99]

My stitch control is jummed

[@ChrisLucasDesigns]

I would contact your Janome dealer or a sewing machine service technician to help you with that. I only operate and drive my sewing machines like I do my car and don't fix them myself. Your machine could be due for a service maybe?

[@louisebrault772]

What about the kind of thread at the bottom ?

[@ChrisLucasDesigns]

I like to use the same thread top and bottom

[@CarolVout]

Would have been useful to actually see you threading machine.