is the tiny DumboRC any good? let's find out! (also how to set endpoints)

A new Transmitter from DumboRC, and it's tiny... The all new DumboRC X6PM-350 unboxing and explained.
Buy DumboRC here: s.click.aliexpress.com/e/_EwM...
RC more than my hobby, its a lifestyle! Therefor I'll post a lot of RC stuff video's on my channel and I'll do my best to give you hours of entertainment and knowledge. Only with your support I can keep posting new stuff. Thank you!
(affiliated links may be used to support the channel)

[@Mossman04]

Love this remote! The steering wheel upgrade is nice too

[@ksavage681]

The last channel 6 knob is for gyro sensitivity. No need for button presses, just turn it.

[@farmoboy83]

bought one as my first dedicated transmitter to upgrade esc on my hbx 16890pro and deeply impressed!!!

[@mikegreen2214]

Good tutorial, thanks! I was a bit surprised by how small the transmitter actually is in hand, but it works great.

[@anthonyclark2873]

This Remote does feel good, and looks great! I looked at the bottom, and it had those little nubs on the bottom. Are those feet? I set it down on the feet, and it actually stood-up, withoput falling. So, this alone is impressive. Balance in the hand is important to me, Mine came with a RadioLink Lanyard. This is trolling, because RadioLink does not work with DumboRc, but are made in the same building, and are related companies. I have two nice RadioLink Receivers, but no RadioLink Remote.

[@hofsplace]

Radiolink receivers don't bind to Dumbo, I tried that 😅. Funny they put the lanyard in there 🤔

[@rctraildriversuk-lone-wolfvide]

very helpful video top man

[@giopirmisashvili5514]

Thank you

[@colbyhann1808]

i have had this thing for like 6 months! bought it for mini drifter havent been able to set end points im at beginning of video hopefullly this end points claim is true!!! got the mini RX with Gyro included

[@hofsplace]

It worked for mine, just try it

[@colbyhann1808]

@@hofsplace I’ll have to watch again when you say end points are you meaning dual rate? Or actual end points

[@BVC0180]

How do I reset the steering on it??

[@drclos08]

great video, what kind of trainer cable do you use / compatible with

[@hofsplace]

Thanks. I don't use the trainer functions

[@arq.andresfelipemoralesvar9593]

Hey my friend thanks for this video, I was wondering if you have used or you know if using this controller with the X6FG receiver you can turn on and off lights on an Rc car? (Hypergo h16BM) thank you for your time 😊

[@hofsplace]

Hi, for controlling lights, I recommended to use the X6DC s.click.aliexpress.com/e/_EIPnGN9

[@arq.andresfelipemoralesvar9593]

@@hofsplacesorry for late reply, thanks for your answer, this rc has been wonderful, probably will install a receiver in my granite too

[@teknolem7426]

Can you set endpoints on trx4 diff locker servos. Cant get em to engage

[@hofsplace]

Yes, that should be possible

[@vdel9036]

Thank you for these infos. I use the small FMS transmitter to drive my 1/24 crawlers and prototypes. Does this Dumbo bind the FMS receiver/ESC combos ? If not, which receivers can be used with it ? Only the same brand ?

[@hofsplace]

Hey, no, they don't bind. The TX/RX from FMS are made by Flysky. The new tiny Flysky doesn't bind to them as they are ANT transmitters.

[@vdel9036]

@@hofsplace Thank you for the answer. A pity as these Tx/Rx/ESC combos from FMS are really good on slow speed and also quite cheap. I'll look for a micro receiver to fit my old Futaba 3PK.

[@hofsplace]

@@vdel9036 totally agreed with the FMS combo's, they are great! And less sound coming out of the motor

[@evoemperor3776]

How does the lights work if all channels are connected to something like winch or 2 speed gearbox?

[@hofsplace]

When the DumboRC light module is used, steer 2, or 3 times to turn lights on/off, or hazard lights on/off

[@user-ih2hj1kv8x]

Teacher ^^ I would really appreciate it if you could teach me how to set the fail safe.

[@hofsplace]

Try to throttle up a little, so the wheels are spinning, then switch the transmitter off. What happens with the car?

[@user-ih2hj1kv8x]

@hofsplace Thank you for your comments. Transceiver is still in delivery When I arrive, I will check and reply.

[@hofsplace]

​@@user-ih2hj1kv8x👍🏻

[@colbyhann1808]

so i got the Gyro receiver do you have any idea how to adjust gain on the gyro?

[@hofsplace]

Hi, please follow this link, explanation is in the description: s.click.aliexpress.com/e/_EyXgLC7

[@BVC0180]

I don’t know how to reverse steering on it

[@stevearmett1565]

So the real question is which is best the X6 Dumbo or the new one ? Which has better range ?

[@hofsplace]

I prefer the channel 4 on the X6. Beside that i would choose the tiny one.

[@stevearmett1565]

@@hofsplace the reason I asked is because I have the X6 and my brother wants a new TX will tell him to get the new one 👍

[@hofsplace]

Did you watched this video? Perhaps you'll make another choice: kzbin.info/www/bejne/pGrQfGBnr5KrsLM

[@Dody_dee]

Can't it set to 4ws? (Only using steering wheel)

[@hofsplace]

No, not via the remote. You can use a Y cable in the receiver, then you have to reverse the servo in the back

[@Dody_dee]

@@hofsplace I will try, thank you.

[@tonyborg6918]

The new one is same distance range like the old one??

[@hofsplace]

Sorry, can't tell as I rarely use 300m+. But I can say, it never let's me down with speedruns

[@BVC0180]

How do I reverse steering on it??

[@hofsplace]

Hi, not know the answer now, if I know, I'll let you know

[@BVC0180]

@@hofsplace alright

[@BVC0180]

How do I reverse steering on it???!?!????

[@andreasborkes695]

Have the same question. Do you have a Solution for it?

[@luvadealme]

Have you flicked the CH1 switch?

[@farmoboy83]

just reverse channel 1 on those tiny switchs under the knobs to adjust throttle and steering sensitivity

[@BVC0180]

I don’t know how to reverse steering on it 😭😭😭

[@BVC0180]

How do I reverse steering on it

[@joseom208]

On the red little plastic rectangle inside de cover, there are four little bottoms. Labeled from 1 to 4. Just change the one you want to reverse. Should be number 1

[@BVC0180]

@@joseom208 THANK UOU SO MUCH 😭😭😭😭

[@mheckpool]

how to set end point on ch1?

[@hofsplace]

Hi, with the calibration of the steering and throttle stick I assume. Never needed to try myself. Did you try to use the dual rate knob to adjust it?

[@mheckpool]

ow i see never tried to use it im still waiting for my esc i cant wait to try it