✅

[@ansys_cfd]

Ansys Fluent Tutorial - Open Channel Flow Part 1/2: kzbin.info/www/bejne/gqiTZYWHq5yWZ7c Part 2/2: kzbin.info/www/bejne/aqGYZaiKr698rJI

[@hafededdinehalaoua4337]

Comment calculer la hauteur d'eau sur le canal dans cette case ?

[@ansys_cfd]

In this case the water height is defined. For this tutorial is 1m, That is an advantage of using this tool (Open Channel Flow).

[@hafededdinehalaoua4337]

@@ansys_cfd A method for finding the change in the height of the water by changing the distance For example : At first the height is 1 meter At the bulkhead, the height is reduced to 0.7 meters At the end is 0.97 meters

[@ansys_cfd]

To calculate the conjugate of a supercritical or subcritical flow I use this book: amzn.to/3umjgL1 However, in the simulation the height is defined at the entrance, the height in the outlet is only as an initial condition, when the simulation reaches convergence there will be a different height than the one initially defined. That height would be the conjugate height.

[@fadakfadak9781]

Was the reversed flow happened through calculation?

[@sachithperera4626]

We need a video about supersonic aircraft simulation in OpenFoam. Love your work man.

[@ansys_cfd]

I will try to make in the future. Thanks

[@TheEagle2301]

Hi! Thank you for the video, could you share the residual plot so that we can have an idea of how it should look in order to converge? Thank you!

[@repackgames8464]

Love ur music 💖🎵

[@jo-of-joey]

Truly a ninja!

[@eldhosecjose5186]

Hi.. Can you show how the effect of pressurized under water bubbles on the surface of water

[@edwinrajeev7050]

Hi, THank you for the awesome tutorial. I had a question. You mentioned a pressure inlet and then specified an inlet velocity. What is this velocity you are mentioning? KIndly do consider. THank you and Keep up the great work.

[@luxalyn215]

input for Velocity Magnitude is required to calculate the dynamic pressure being used in the total pressure calculation.

[@PYRAMIDHEAD1051]

Velocity at the inlet specified was the average velocity of the open channel stream at the inlet boundary.

[@veeramaniamirishetty6959]

Sir how to patch water in a straight Glacis fall ?? Please do video for straight Glacis canal fall ....

[@denn7621]

Tengo una consulta, estoy haciendo simulaciones con el flow 3d para la universidad y para hacer una simulacion de 30 segundos toma unas 15 horas con una laptop I7 de 4 núcleos y 8 hilos ¿Cuanto tiempo le tomo hacer esta simulación con el Ansys, si es posible que recomendarme los requisitos minimos de computadora para usar estos programas? Espero su respuesta, gracias de antemano.

[@MAIKOL8215]

Cordial saludo, me encuentro realizando mi proyecto de grado y estoy empleando técnicas CFD, primero agradezco el trabajo que realizan me han ayudado bastante, pero tengo algunas inquietudes respecto a la condición de contorno cuando se emplea el submodel open channel, la primera es el bottom level es el punto más bajo de la cara que se seleccione como entrada y si la geometría presenta alguna pendiente como se puede determinar el bottom level, otra pregunta es si se puede emplear solo la condición de pressure inlet (open channel), sola dejando la salida solo como pressure outlet

[@markkeating3522]

Probably best using a dedicated 3D hydraulics code for applications like this

[@cankatsarcam8879]

Hello sir my question is diffirent from this videdo. Ive project about pv panels but i dont know how to define absorptivity and transmissivity. Can you help me pls.

[@angelenriquezdiaz296]

Excelente tutorial dictas algún curso sobre el manejo CFD aplicado vertederos y donde podria contactar

[@ansys_cfd]

Podemos hacerte un servicio de simulación. Saludos

[@jianzhou967]

Can anyone teach me how to output the vertical coordinates of the free surface level? Thanks!

[@nabilallouche8945]

Hi thnk you for this vidéo i need to help me for used naca 012 on open Channel 3d PLS !!

[@hafiydane9182]

what if i use steady state

[@ansys_cfd]

you probably won't find convergence

[@NonSi_]

фигня полная. Делал так же вода почему-то выше уровня модели и все хоть что делай. Недоделанный туториал дизлайк автору