Ansys Tutorial - Fluid Flow Analysis(CFD)

In this tutorial , the part contains different pipe cross sections in which fluid i.e water is flowing at different velocities and temperature.
We will see the changes in the velocity , temperature and pressure at the output.
I have used the Fluid flow (Fluent) module in this tutorial.

[@deekshithns8491]

Sir, I have one query, When designing the HVAC supply duct system, After calculation of ASP from the manufacturer blower data (ESP- Device pressure losses). That ASP will become the pressure drop budget for the duct system. Now if we are designing the duct system with equal friction method based on FR calculated...and carrying out CFD analysis of designed duct, the solver fetches static pressure and total pressure data w.r.t our design. Now w.r.t previously calculated ASP which is our pressure drop budget, say some 0.4 inches of water gauge. Now inorder to check whether duct design is within the limits as per ASP in CFD analysis tools. which pressure drop should I need to consider ( it's a total pressure in the volume of air or it's difference in Total pressure at inlet to outlets, or it's a max static pressure developed in the air volume inside duct) kindly clarify

[@nickp5115]

Can you post the geometry file?

[@AKaushal49]

You can download from here : grabcad.com/library/venturi-analysis-ansys-tutorial-1

[@Muxums110]

which software u used for the geometry before meshing ??

[@hemanthHK45]

The geometry link which you have provided is completely different.... Please attach exact geometry designing tutorial please

[@AKaushal49]

Hi Hemanth, You can also create your own geometry as well, it's not that difficult. You can use any 3D software, it will hardly take 10-15 minutes to create such kind of geometry. I will try to upload this geometry as well. My suggestion for you is to create a different geometry and apply the conditions on it.

[@hemanthHK45]

Hai@@AKaushal49 I am simulating in openFoam So, i need accurate meshing... for that i need exact design which i am not so good at.... My project has similar cylinder with 2 inlets.... Please upload the geometry please.... I have Ansys 2020 R1 Thank you for you

[@AKaushal49]

@@hemanthHK45 okay I will try to upload

[@danyghr]

@@AKaushal49 and u never did

[@farahaisyahnazry2764]

Can I have the geometry file?This will help my final year project. Thank you in advance.

[@AKaushal49]

Download: grabcad.com/library/venturi-analysis-ansys-tutorial-1

[@jacksonsunny1261]

Hello, can you please share the geometry file. It'll be extremely helpful. Thank you!!

[@AKaushal49]

Download: grabcad.com/library/venturi-analysis-ansys-tutorial-1

[@jacksonsunny1261]

@@AKaushal49 Thanks a lot!!!