same here bro but the video is so good specially the elaboration of result part
@v_naymishra3 жыл бұрын
2X here
@davidchaudhary58074 жыл бұрын
Thank you very much for this nice tutorial. It's good that you speak while using the software, it enhances the learning experience. Thanks again!
@Abhinav-ib2er3 жыл бұрын
Thank you for your tutorial 😌😌
@muscleshawty19959 жыл бұрын
wow!! absolutely amazing explanation. Great work. please continue to make many more such videos about ansys.
@ANSYS-India9 жыл бұрын
Thank you for liking my work. I will continue making new videos.
@VikramSingh-cc5fy4 жыл бұрын
this is outstanding, best explanation
@ratnasambhav73385 жыл бұрын
Great tutorial. Made it all so clear.
@karthikak87749 жыл бұрын
thank you for this video it is very clearly explained each and every point and every one is able to follow this
@ANSYS-India9 жыл бұрын
Karthika, good to know that you liked my work, pls visit my website for more tutorial, sites.google.com/site/feaengineeringdesign/
@RanjanVron8 жыл бұрын
best tutorial ever, Thank you Very much
@ANSYS-India8 жыл бұрын
Good to know your feedback Ranjan
@samituffaha87754 жыл бұрын
I have a several questions: 1. What about the multiples of the exciting frequency? 2. Is every freuqency here relevant for the rotation of the fan? I mean there are modal frequencies for bending and other modal frequencies for torsion. I think the relevant eigenfrequencies here that might cause a resonance case for the rotation of my fan the torsional eigenfrequencies.
@samituffaha87754 жыл бұрын
great explanation!
@ayushgupta50618 жыл бұрын
1. sir why did u extract the mid plane for analysis ? 2. sir it would be really helpful if u can make a tutorial on efficient meshing ? and by the way great tutorials sir
@shruthimahendrakar8 жыл бұрын
Sir the video is really very much informative and you have explained it very well. can you please tell me how to give fixed support for a solid rod on its curved surface for specific area.
@SreeNivassrini9 жыл бұрын
Very good explanation. Why you use mid surface?whats the rationale behind using mid surface concept?
@ANSYS-India9 жыл бұрын
Sree Nivas, we use mid surface to represent the constant thick walled parts, and to capture the bending behaviour more accurately. In ansys, as soon as you extract mid surface for any constant thickness walled parts, it automatically records the thickness, this thickness will be show when you do the surface meshing. you can write me on below mail ID, and visit my website for more videos. Email: engineeringtutorsdesk@gmail.com Website: sites.google.com/site/feaengineeringdesign/
@karthikhhh9 жыл бұрын
very nice :) thank you :) its nice that u explain "why" and "what" :)
@ANSYS-India9 жыл бұрын
Thank you so much Karthik for your feedback, this will help me improve the quality of my future tutorial videos. Please share this video with your friend's or those who are interested in learning ansys, if any one is interested in online training from me please contact engineeringtutorsdesk@gmail.com
@sourabhitekindia18167 жыл бұрын
Hello Sir.If I want to get the results at 60Hz, where to enter this frequency
@venkateshkulukuri78869 жыл бұрын
good explanation, ok it is in static condition, but how can i find the frequencies at required rpm's (N1, N2,....) to draw the campbell diagram...
@shridattamarathe55678 жыл бұрын
sir how did you model the rotor fan? in catia creo or some other workbench? also if possible put up a vedio for the modellign part as well.
@vignesha17208 жыл бұрын
hello , nice video & your explanation is very good , good effort it will be easy for beginners...I have one request plz upload any assembly unit modal analysis .
@ANSYS-India8 жыл бұрын
+Vignesh A sure I will try my best in near future
@karnativikram65836 жыл бұрын
Vedio is very good . Can you tell us how to find the amplitude of vibration
@Lightningyeye6 жыл бұрын
Thanks for the video. I have one question about Total deformation output which comes from mode shape result. How can i interpret total deformation values? Are these the real values? If not, how can i get the real results when it gets resonate.
@naveenkumargulla41106 жыл бұрын
What is the significance of total deformation??? You've got almost 20cm as deformation value at 3:54 sec, does it mean that the red colour zone is having maximum deformation of 20 cm or the entire propeller is having 20cm deformation
@ayushpandey42259 жыл бұрын
I create a model and when further go to in geometry choose faces there is an error occurring frequently. Warning: Face pair selection tolerance.suggest 6.25-006m.I don't know much more about ansys, so what am I suppose to do??
@abhaypratapsingh6497 жыл бұрын
how we can do the modal analysis of a multi leaf spring in ansys workbench ? what are the boundry conditions for it?
@tono9876548 жыл бұрын
HelloIm glad I can find these kind of videos, thank you so much. I would like you to present some references as I need to do a modal analysis for my ansys course and I cannot put as a reference a youtube video :S I don't know where to find that the natural frequency cannot be equal to the value in rev per second.
@manojalvandar98106 жыл бұрын
Is mandatory to fix the body to find out natural frequency in free-free analysis ?
@MuhammadImran-sk9ej8 жыл бұрын
How to add damping to each mode separately in ANSYS workbench ?
@shubhamchauhan1456 Жыл бұрын
more videos
@khalidaldous90297 жыл бұрын
thank you for your video, I would like to ask you about How can I do the natural frequency model for a non. Reflective boundary conditions for the soil surround the tunnel, so I can measure the natural frequency (free-free vibration analysis) of the model Without duplicating the measurements from the reflection of the wave, or ANSYS mechanical will understand by default that it is a non reflective boundary, so the wave will not reflect and it will go for infinity since the soil model is plan strain model? Please advise. Please note that I made a search and found that only ANSYS fluid can have this option for the user to choose the boundary conditions ( reflective OR nonreflective boundary). appreciate you help and support and I will wait for your respond. Thank you Khalid l dous
@swapniljirage61977 жыл бұрын
How can get .igs or .stp file of model used in this tutorial ?
@umanggupta9503 жыл бұрын
Sir do you have any idea how to do modal analysis of structure under water in Ansys. as there we need to consider the Hydrodynamic added mass.
@ANSYS-India3 жыл бұрын
One of the approach can be, you can do pre stress modal analysis. Create static structure analysis with pressure load, then do a modal analysis
@umanggupta9503 жыл бұрын
@@ANSYS-India thank you for the quick reply sir. I actually want to do a free free modal analysis (Ships etc). For example a Cube immersed in water or floating.
@ANSYS-India3 жыл бұрын
Check this link, whether it can be any help to you. www.researchgate.net/deref/http%3A%2F%2Fe-collection.library.ethz.ch%2Feserv%2Feth%3A7837%2Feth-7837-02.pdf
@umanggupta9503 жыл бұрын
@@ANSYS-India sir many thanks for taking time and searching information for me. I actually did come across this thesis a week ago. but it didn't have the solution for my problem.
@dannyou70176 жыл бұрын
an amazing work.but this tone......em. I have to speed up this video.lol
@biswaswain38458 жыл бұрын
is harmonic vibration and axial vibration of a rotating shaft possible in ansys?
@ANSYS-India8 жыл бұрын
+Biswa Swain Yes
@igboman28609 жыл бұрын
Why did you use mid surface? doesn't it affect the thickness of the rotor and hence the vibration response?
@ANSYS-India9 жыл бұрын
+Chukwuka Nwobi Greetings!! Mid surface was used to use the shell elements, because the shell element capture the bending behavior more precisely compared to the solid elements like Hex and Tet
@abbaseskandari89666 жыл бұрын
THANKS!!
@Monuchaitu447 жыл бұрын
can we use this for a 3d beam?
@ANSYS-India7 жыл бұрын
+chaitanya naidu Yes
@Vik-kw4sy7 жыл бұрын
how to decide max number of modes
@dunno904 жыл бұрын
Too slow and too much good info. thanks!
@rajeshgoudkanthi9 жыл бұрын
you have not specified about element type, will it pick automatic or do we need to specify.please clear this
@ANSYS-India9 жыл бұрын
Greetings! ! Raj the element selected will be automatic, because in workbench before you start the analysis, you choose the analysis type like static, modal, thermal and so on, due to this the relevant elements will be used by default for the mesh generation. But order of the element can be changed manually. If you are interested in knowing which elements are used then please see the output window after the solution is completed.
@romanglushenok56319 жыл бұрын
Forexample I want to check how strong (amplitude) the frequency is at 167 Hz. Where can I found this information?
@ANSYS-India9 жыл бұрын
Roman, you need to conduct harmonic analysis to get the amplitude.
@romanglushenok56319 жыл бұрын
is it possible to do it under Ansys?
@ANSYS-India9 жыл бұрын
Yes
@TheDiago988 жыл бұрын
how did you do for desing?
@ANSYS-India8 жыл бұрын
+diego manuel pacheco molina Sorry I did not get you
@allociousbritto92499 жыл бұрын
how to find whether it is bending mode or torsion mode? pls anyone can help me?
@ANSYS-India9 жыл бұрын
Allocious Britto Allocious, all modes you can be found in the analysis, need to enter the number of modes before the beginning of the solution.
@saravananravi6187 жыл бұрын
can u upload this working file sir
@dineshkale46696 жыл бұрын
Please share CAD file...
@HusseinHussein-lu4gs8 жыл бұрын
Sir, thanks for the video. please give me your direct e-mail. I'm new ANSYS user and really need your help. Thanks a lot.