Anvil 075: 1911 Conserve and Reassemble

[@360S0DJefferson]

Old rebuilt a thousand times mixmaster USGI 1911/A1. One of those saved my life once in a foreign land and are the ONLY legitimate GI 1911's. Why? Because they were actually used by GI's, fought in multiple wars, helping face down a deadly enemy, who feared facing them and whose pistols they often defeated. My WWII Marine Father taught me how to use one properly and in the most desperate of moments, the old rattle trap showed me why it was called the "Yankee Fist." I will always love these Genuine GI 1911's.

[@anarchyscorner]

Thank you for your service

[@360S0DJefferson]

@@anarchyscorner Please don't thank me. Thank my recruiter. :)

[@michaelrobbins6694]

I'd love a Hi-Power version of this non instructional education viewing! To compare for artistic purposes of course! Thank you Mark!

[@tarstakars]

"Kid if your guns got matchin' numbers it ain't never seen combat" Bob Penny WWII armorer From North Africa to Normandy.

[@michaelrobbins6694]

Or it's French.. two proof marks are required. The factory one where it didn't blow up when actually fired.. and the other is the skid marks from the training area when the firearm hit the ground when it actually fired and caused Merde'

[@Driver944S]

And the part where you talk about why Frankenstein feeds empties........... is missing?

[@Kriss_L]

The first armed watch I ever stood was with a Singer 1911, in 1996.

[@mattelder1971]

Yep, contrary to popular belief, the 1911 was still being used for guard duty, etc. WELL into the 1990s.

[@mgreen7063]

Wow, a one of 500 gun, still in service. Wonderful.

[@tomtruesdale6901]

Another great video Sir. Back in the late 1970s when I was in the Marine Corps my issue 1911A1 had been made by the Remington Rand Corp most likely before I was born, rattled like a box of rocks but that gun went bang every time I pulled the trigger and I hit what I was aiming at. Love me a 1911.

[@p47rr]

Bought one used. One grip bushing silver solder in. Slide was crack on one side. Tig welded and silver solder repaired. Feed ramp was ground downed to far. Barrel was cut and polished to work with the feed ramp. So had ramp cut out for a ramped threaded barrel.Slide had been repaired by gun smith back in 1973. Having the parts rust blued. Frame and slide coated with baked on paint that looks like bluing. Had no idea when I bought it that it needed so much work.

[@marknovak8255]

BUT......a 1911 will pop out of the process at the end. YESSSSSS

[@mgreen7063]

There was a period of time when I was not a 1911 .45 fan. That time has passed, and now I want one. What a wonderful example of an iconic weapon.

[@hansj8203]

I’m very much the same way.

[@sonparabailar]

I was the same. Now I have several.

[@adamsowers8957]

I am completely addicted to this channel. Amazing work as usual.

[@williamkaylor1191]

I have a Colt 1911, and a Colt 1917, that my Father bought through the CMP before I was born, which was 1961. My Father died when I was three, and my Mother gave his brother, my Uncle Carol, the pistols to hold until I was old enough. On my 16th birthday, my Uncle brought them, plus a Ruger. Mk i .22, and showed me how to field strip, clean and lubricate them. It is in great shape, other than a circular scratch under the slide release, as the bore still has the broaching marks. I think I will take it out of the. safe and think of my Father and Uncle as I clean and oil it. Maybe a day at the range when all this 'Rona is done. Mark, I think you are the only smith I would have work on. it. Love all your videos. God Bless.

[@kbjerke]

Yummy!!! Deep - Fried 1911!! My favourite!! Thanks, Mark!

[@bassassassinnn7459]

There is no other pistol that I favor more than the 1911. Thank you Mark, for saving one more firearm from the effects of time.

[@MichaelT199]

Anvil and a 1911. I most definitely did not piss off God today.

[@FeedMeMister]

It's likely only the B-52 will serve longer in inventory than the 1911, and that is a testament to the B-52's ability to drop ordnance, and the 1911's ability to throw it forward. Albeit not to scale.

[@tulatoiletandsepticllc81]

Actually another one of JMB firearms will probably out serve the 1911, b-52, and all other weapons. The M2 browning machine gun.

[@FeedMeMister]

@@tulatoiletandsepticllc81 OK, you're likely right here. Time will tell however, and either way the winner is an international hero.

[@lokivonbrandis2129]

Always a pleasure to watch a master gunsmith at work!. And as always!, can't wait for the next video!.

[@AutumnsArmory]

You're the best. We need to come see your shop sometime!

[@umbraelegios4130]

The one flaw Browning never was able to over come was the lose nut behind the sights.

[@marknovak8255]

No shit

[@AutumnsArmory]

Need to get one of these in Autumn's hands.

[@independentthinker8930]

Love to see her with one!

[@jeanniebuchholz9923]

Either a parkerized GI or a between the wars bright blued commercial Colt are the 2 best looking 1911s IMHO. Absolutely gorgeous. Thanks.

[@Magicalamazing]

Glad to see I'm not the only one who needs to fidget with getting the sear and disconnector back in the gun! Great video as always ;)

[@FrednDeeDee]

I had the pleasure of using one of those 45s in my Army days 72-76. I'd fire a round and then wait for the gun to think about cycling a fresh round for a while before finally doing so. When I got out of the Army I bought a 357 Ruger Police Service Six in stainless steel so I could use it as a combination handgun and boat anchor for my 10 foot flat bottomed boat. I prefer a revolver that doesn't have a mind of it's own and one doesn't need to be a brain surgeon to keep it cleaned and in excellent working order. I have managed to conserve and reassemble the Ruger several times over the years with only a minimal of cuss words and only one or two urges to toss the dang thing in the lake. You're my hero Mark !!!!!

[@seetheforest]

I did my first rust blue conservation today. I tested it out on my Stevens Springfield .22. It came out fabulous. Ran it through two boils and rusts. It still has a few barely visible spots but I'm so happy with the way it came out. The end and around the tip of the barrel that never had any blue on it is now beautiful and black like a coal miners lungs. Even my girlfriend was impressed.

[@kitten-inside]

Man, that goofy ("clearly broken" when you first see it) spring. John Browning was trolling people before trolling was a thing.

[@enricomandragona163]

Mark I served in the Navy from 80-86. Yes we carried the 45 and I'm proud to be the last to do so. Nothing against Beretta as I have those too. Awesome video and I learn something new every time I watch it. ✌️👍

[@hughroadie2291]

Numbers not matching just indicates that it was probably a “unit-issue” gun. I was Gunnery Officer in a WW-2 vintage attack transport (USS MONTROSE (APA-212) in 1968/69. I was “signed for” fifty (50) 1911-A1 pistols, all WW-2 vintage, but many different manufacturers. I would guess that all 50 of those guns had mis-matched numbers. Our small arms were retained in the armory, and issued as needed for boat crews, sentries, shore landing parties, etc. None were personal issue. Most of our on-board training was “familiarization firing” on the fantail of the ship. During these sessions, a couple dozen 1911s were fired by many different sailors, and after the sessions, all of the guns were disassembled, production line-style. One Gunners Mate would clean all the slides, another GM had all the barrels, another sailor cleaned all the frames, and so forth. Reassembly was done by yet another GM, with any part that was convenient to hand. After decades of this cleaning/reassembly process, surely every one of those guns had “mismatched numbers.”

[@marknovak8255]

Right. My point was that it IS one of these issue armory units, implying that it is NOT a museum piece, so we might as well get on with doing he maintenance. Patton didn't carry this thing, if you see where I'm coming from. I will spot the fact that I didn't articulate this well, noting that none of this is scripted. It's barely storyboarded.

[@hughroadie2291]

@@marknovak8255 Ha! Thanks Mark. Your videos are great, and you are more than articulate! I’m glad you mentioned that the GI-issued 1911s were meant to be loose. Most of ours rattled around like a bunch of nuts and bolts in a coffee can! They began their lives in 1943 when the ship was commissioned, then after heavy use in the Pacific in WW-2, went on to serve in the Korean War, and then the Vietnam war. I’d love to know where all those small arms went when the ship was decommissioned in 1969. We also had a slew of M-1 Garands, BARs, Thompson sub machine guns, 12-ga riot guns, .30 cal machine guns (for the LCVPs), and M-2 .50 cal MGs. Our “main battery” was twelve 40mm “Bofors” guns. I miss those days!

[@enricomandragona163]

@@hughroadie2291 kudos

[@peghead]

Stock, no-frills M1911A1, the most beautiful pistol ever devised.

[@someguy936]

Mark, Thank you for a wonderful video. I own an American Tactical M1911 military .45ACP. I love it. I wanted a Colt but couldn't afford one, but, I'm really glad I came across it at my local buying spot. It was used, but whom ever had it didn't use it a whole lot because it didn't have any wear. It's my daily carry. You're video showed me many things and you gave some really good advice. Thank you for your service and thank you for your wonderful videos. 2nd Amendment = Freedom.

[@samvittoria9692]

Back in 1980 when I enlisted in the Coast Guard that was our sidearms. Old used 1911's . We loved them.

[@mikeseigel6566]

I used one in 1988 when I enlisted in the CG. Shot the 1911 and the M9 in bootcamp-expert with both. At my first unit we used the 1911 until 1990 when they were replaced. Loved my issued singer.

[@Dsdcain]

I like, and carry modern firearms, but there is really something I love about 1911s. I have a few in 45acp and even a full sized Kimber in 9mm (I know. Why, right?). Just really enjoy shooting them. I do get a kick out of people claiming that 1911s are jam machines that can't fire more than 2 rounds without a malfunction. If you keep it cleaned and have it broken in, it'll work every time you pull the trigger. Love these videos Mr. Novak. 👍

[@MrELLIS1952]

Mark, Thanks for sharing your knowledge of conservation and restoration. I have learned, and unlearned More in the last year about proper care and restoration of fire arms than in 45 years. I especially appreciate the techniques you demonstrate in handling various stages of rust. Who knew! Anyhow I’m enjoying every rabbit hole!

[@marknovak8255]

Great to have you aboard. Please help spread the word!

[@michaeldurling793]

I remember Navy small arms training in the early 70's we shot 22LR, M14 and the famous 1911. I did ok with the long guns but buddy I couldn't hit the back side of a bus with that pistol. I purchased a modern Browning arms 1911 in 380 as my EDC and even with the reduced recoil you still need to practice, practice and practice to be proficient. Thanks Mark always learn something from you.

[@independentthinker8930]

My 1911 drives tacks

[@michaeldurling793]

@@independentthinker8930 I believe it's your skill with your 1911 unless perhaps your are actually using it like a hammer, just kidding.

[@independentthinker8930]

@@michaeldurling793 I have been shooting one for decades, my daughter is a custom gunsmith, she's done some refinements along the way, mainly springs and trigger, a relief cut on ejection port. Sweetest shooter I've ever shot.

[@wmsollenberger8706]

Just a note on matching numbers. Any service arm run through Depot Maintenance for evaluation and rebuild will have unserviceable/unacceptable parts replaced with whatever is in the replacement parts bins. So any 1911 (or A1) will be a 'genuine' military piece as the armorers were not concerned with matching any parts beyond spec. finish and functionality. I have my uncle's 1942 Colt frame with a 1951 (Govt. spares) slide that was Colt factory parkerized with 50's commercial roll marks, but it is a Korean War bring-back and every bit authentic Govt. Issue. A friend has a 1915 Colt receiver with a SA slide, eh, gotta love the Army, whatever works I guess! lol Been in love with this weapon since I was a kid reading my dad's 1940 Marine Corps manual!

[@bristleconepinus2378]

a dear friend, long gone now fought in WWII, Korea & Viet Nam , shot pistol competition for the U.S.Army and once told me that they used to take a bunch of pistols, strip them down and find the parts w/ the closest tolerances, sometimes use valve grind compound to make the tight ones fit and use those guns in competition.

[@wmsollenberger8706]

@@bristleconepinus2378 that's cause Army Marksmen are smart, talented and resourceful! In the military it would be the armorer's shack for me! Benny Havens, OH!

[@ThinMint_OG]

Best channel on KZbin. You inspired me to start conserving guns

[@marknovak8255]

Mission accomplished.....outstanding

[@loviedebiasio8864]

good ole John Philip Sousa USMC marching music. love it. i remember hearing this on the Parade deck at MCRD San Diego during Graduation in 82

[@petemulhearn7787]

Instructive and entertaining, all in one package. Thank you.

[@Subgunman]

My sidearm of choice. Built up a "stock" version on a Para P14 wide body (70 series frame) Stock trigger, Ed Brown sear/ disconnect combo skeleton hammer. Now for that bit of authenticity, a WWII Remington Rand slide with a stock mil barrel, spring, spring cap and an oversize bushing that I took down to fit the slide and barrel. Never had any jamming issues, it consistently lays down fire center mass at 20 meters. And yes it's the ID10T behind the firearm that makes the difference. PRACTICE ( x100) makes the difference. Very nice and well done video on conserving this fine item. Back in the 70's went to a Gov auction with my father, there I came across several nail barrels full of 1911's packed in that "C"shit. Asked my dad to bid on it form me, he refused. They went for about $100 a barrel. I can only think of what they might be worth today.

[@DARIVSARCHITECTVS]

This is my FAVORITE gun channel. I love historic firearms.

[@M101K3]

Even though I'm not American I can't help the joy of watching an old 1911 being reassembled with a bit of Sousa for the music.

[@zeekebagley2691]

Carried an ithaca in the first gulf war was also the first time I completely dissembled once....I enjoyed the review your video provided

[@jeramyw]

I heard Browning put the grip safety on there because he was forced to by the military.

[@wildweasel8564]

This is a great tutorial for detailed cleaning and maintenance of 1911A1’s. Thank You Much!

[@jammbbs1688]

From what colt's serial numbers told me my colt 1911 was made in 1952 and chambered in .38.super it's got a great worn patina and all original parts it shoots so damn smooth and that old ass trigger is just chefs kiss

[@4351steve]

The first one I handled was at RTC Orlando in the Winter/Spring of 1973. I have been in love with them ever since.

[@jayammons3834]

Thanks for posting this Mark, truly a Masterclass as always.

[@charlesholzschuh5551]

Your photography is getting more better. Keep up the great work.

[@Toolness1]

My dad was Navy as well, back in the 70's and was expert w/ the 1911. He was taught the hammer hold deal as well, and shot one handed. Even though his eyes are real bad he's still excellent with it. He was a sub man, on the Nautilus and James Madison. Then taught at nuke power school.

[@enricomandragona163]

Kudos to him sir!!

[@ronnykoogler9003]

nice

[@Icanhasautomaticcheeseburger]

Just got an Ithaca 1911 from the CMP. Your video was of great help getting mine ready to rock and roll (CMP did a great job, but I got some gunk hiding inside). Thanks!

[@kagyu1]

My grip bushings fell out of my CMP 1911. Had it fixed by a pro. It’s a 1943 Ithaca mixmaster that ended up with the marine Corp. Love your channel!

[@Drew4078]

I simply love watching you work on Guns. Especially when it’s a 1911

[@davidsims1329]

My first introduction to 1911 A1 was with the Marines can’t margarita doing a familiarization course in the medical battalion and I remember distinctly taking apart and putting it back together but the second time I did that I did it with my eyes closed and 20 bucks from my captain what a great day was remember that I was so proud of thatthree years later qualified, sharp shooter left and right hand halfway through if I would’ve just kept it on the lefty expert, but that’s OK. You do a great job Mark.

[@bertvanderzon1048]

I thoroughly enjoyed this video! I need to buy an inexpensive 1911 and practice disassembly and reassembly. Thanks for your time in making this tutorial.

[@slowhand1198]

Glad to see you show this classic. Loved it. Picked up a Norinco brand new back in the day when you could actually do that. Twenty pound trigger jam-o-matic out of the box. Kuhnhausen's books, some patience, and a little bit of kit taught me a bundle. Some see the "Model of the 1911" slide legend and sneer, but she's a sweet runner now, and will out shoot a lot of 1911's that cost five times as much. Ha! Ha!

[@Rmasters33]

I read somewhere that Browning designed the hammer strut to be the punch needed topush out any pin that required a push. Other than the grip screws it can b taken down as you did using your fingers and the strut.

[@JayKayKay7]

5:25 I remember reading in an MRI medical trade journal about a California Detective investigating a burglary of a free-standing MRI center. He walked into the room with the giant magnet with his Colt Combat Commander in a hip holster. The tech told him he can't do that. His reply was that's OK, took the gun out and laid on top of a cabinet on the side of a room. It took off, slammed into the inside of the big donut magnet and fired a round into the wall angled toward the baseboard. They tried to pull the pistol off the side of the magnet, succeeded in doing so only to have rocket over to the other side. It can cost around ten to thirty thousand dollars to shut one of these down which they finally chose to do. Forensic analysis of the incident revealed the series eighty 'drop' safety button was inactivated by the magnetic field allowing the inertia of the firing pin to fire the chambered round as it slammed in to the side of the machine. Safety still on and the gun didn't cycle. In the same trade magazine was another story of a Detective who went in a MRI for a burglary investigation , did the report and happened a week later to go to the range. Pulls out his duty pistol and pulls the trigger. Nothing. Turns out he had magnetized his Glock and it didn't work anymore. The department armorer had to buy a giant bulk audio tape demagnetizer device and demagnetize the officers weapon. ( I am a retired Anesthesiologist and we lived in constant fear and respect about MRI magnets. A steel Oxygen tank can kill someone if it gets away. )

[@marknovak8255]

All noted. The scary part, is the car they drove to the scene is far more lethal than the guns, eh?

[@osterpenpen9379]

To be fair, an oxygen tank is one of the scariest things on the planet. Oxygen makes inflammable things flammable, and flammable things into a bomb. But only sometimes.

[@wurfyy]

@@osterpenpen9379 Just to correct you a bit, for some absurd reason the words "flammable" and "inflammable" both mean the same thing.

[@stevecooper2873]

WOW... was always careful when bringing patients [via ambulance] into the room. When my kid had to have one, I discovered the metal detector we passed through, into the exam area, was SHUT OFF. "Oh, otherwise it goes off all the time". Yikes. I am glad that my hardware in my ankle and jaw stayed put though !

[@mortcs]

Love the video. Do you think you will get around to educating us on how to tune a 1911 to chamber empty cases? I am assuming there are a lot of assembled 1911s out there that have something wrong in the way the barrel was fit to the frame and slide.

[@GunnerAsch1]

Ramp and barrel link. Ill leave it up to you how to google it.

[@chrischiampo7647]

Nice Conservation Mark A Proud 1911 Owner He Will Be 👌🏼👌🏼👌🏼😊👍🏼

[@buffler1]

Hi Mark: great as usual. I use a tea ball, the kind with two hemispheres spring loaded to hold all the itty bitties in the boil...

[@marknovak8255]

Tea balls are awesome for this. We have shown them in use in other videos in the conservation tab...

[@quiettime6871]

I just snagged a a couple two-packs off eBay!

[@remko1238]

No matter what subject,, it keeps being such a pleasure to join that rabbit hole ♥️

[@helinton74]

You Sir are a Ocean of knowledge, thank you very much for sharing It.

[@mrheart4242]

The grip safety is ther so us marines don't shoot themselves in the face looking to see if its loaded.

[@marknovak8255]

Or while coloring the sights with red crayon? .....Actually, the grip safety was specified to reduce the chance of shooting your horse if the weapon was dropped. Really

[@tomtruesdale6901]

@@marknovak8255 Does the red crayon really taste like cherry? I prefer the blue ones LOL

[@bluehueful]

Love the knowledge and love the music

[@bobrees4363]

I was amazed that you managed to get all four grip screws out without at least one of the bushings coming out. I would guess that out of the few hundred 1911A1's I had custody of at least a third of them had at least one loose grip screw bushing. We finally got Beretta's to replace the 1911A1's on my last ship in 1996 or 97.

[@scotte2815]

I served in the USAF in the early '80s. The Standard side arm was [drum roll] the S&W Model 10 in .38

[@brandenelkins2923]

Awesome! Would love to see you work on an M1 Garand

[@uazfoursixnine]

J.M.B. reallly knew his stuff :) Great video

[@williebulletman5217]

It has been my pleasure to have you conserve a 1911

[@jupiterjunk]

Mark... love ya' man. Thank you for the re-upload

[@leadfarmer5563]

Thank you again for your expertise and your position in this industry. I enjoy every episode you make and am grateful.

[@LoremIpsum1970]

Love the close up view, much better for understanding. Thanks

[@meesvandeburgt3525]

Could you do a workshop tour giving us more insight in how you work?

[@dougmoore5252]

I have owned a series 70 for many years, and you are teaching me about it.

[@jakesolver4359]

Mark: “and I’m gonna show you guys why my gun will feed empties and yours won’t” Me: alright, then. Keep your secrets

[@possiblemarten]

WHYYYYYYY

[@mawilkinson1957]

It would be the difference between a USGI barrel and a modern day barrel profile of the chamber feed cuts. A USGI barrel had only a slight chamfer at the bottom where it interfaces with the feed ramp on the frame. A modern day barrel is chamfered much higher up the sides of the chamber. A USGI barrel was only designed to feed ball rounds, as opposed to a modern day barrel being designed to feed all modern day ammo. Wadcutters, hollow points, and target rounds. If the barrel's chamber feed ramps are cut properly and polished, along with the frame's feed ramp being polished, it should feed empties.

[@JD-tl7ld]

Even a GI mixmaster in ok shape is a 1000 dollar gun at least.

[@bradsexton2315]

Nothing more American than a 1911 and John Phillip Sousa!!!

[@smokeytokyo4553]

A beautiful job done awesome job mark

[@chestertnted]

My favorite gun channel. Entertaining and informative.

[@patrickduis]

Nice movie on conserving this 1911A1. Thought I knew a bit or two about them, but learned again a few new tricks. I was a pleasure to watch, greetings from mid-south Netherlands

[@kagyu1]

My CMP 1911 a1 has been having ftf’s . Once it’s running , it stops. People say leave it as is , but I want it to shoot reliably , so I’m thinking of having it tuned up. Love your channel.

[@johndilday1846]

I have always admired the 1911 pistol. Someday I want to build one of my own just for the thrill of it. I own a couple of factory ones, but having seen the Caspian catalog and having heard for years how marvelous a handcrafted one can be, I am tempted to put one together that is super accurate and I can be proud of. If you ever decide to market a video series on how to build your own (I have one already from AGI but meh,...) I will be sure to buy one. Your videos are awesome. Thanks for sharing.

[@dixiemae5042]

You’re the only other person than myself that expresses … perfect practice makes perfect 👊🏻💪🏻

[@mrsa101]

thank you mark. i love what you do. especially this episode

[@hillbillynick2000]

And as always, I learned things! I will be back!

[@senorboardhead]

Thanks Mark - great as always !

[@cipherzero1115]

Omgawsh... Beautiful... I'm so jealous. I want a real WW2 1911 so badly. Awesome vid! I can't get enough 1911

[@leighbratcher1998]

First pistol I ever fired, carried one on my hip for two years in the USMC.

[@1crazypj]

I do a few 'vintage (1970's) motorcycle carburettors and use an ultrasonic cleaner sometimes. For small parts, use a spring loaded tea strainer ball and for slightly larger, a tea strainer. Saves fishing bits out of a hot tank

[@edl5074]

Great tutorial got to love the 1911 have many thanks for constantly making great content .

[@Kit-xg4kg]

Thank you very much for all your didactic and interesting vid.

[@billburns9260]

The 1911 My Favorite Handgun to Shoot Period!!.. Great Video!!.

[@salvatoreesposito8676]

I have a Tanfoglio 1911 Witness 45 ACP it's incredible gun, thanks Mr brown.

[@timothyruggles7396]

Thank you 1983 2006 NAVY love your show

[@allensherlock6741]

Those old warhorses can go another century with some repair and attention to detail

[@webslinger67]

lol Mark, i was going to say, "hey, look , its the gun we learned on in Boot, and then watched the instructor THROW it into a big box with the rest of them" ....but you verified it...thats the gun we learned on.

[@rescue1512]

Would love to send you my old S&W 13-3 in 38S&W, was left under a bed for many a years, it needs a ton of TLC, to get it back to working / shooting!

[@tigerman3]

Great job Mark! Thank you for service shipmate.

[@lokichoki_]

Also my buddy watched me do a trigger job on my 1911 and he decided to try it himself. He removed all the "deep" scratches on all the engagement areas on the trigger and sear and his RIA (series 70) went off when he chambered a round fortunately the hammer followed on the second round. #1 he failed to function check the firearm at any point in his mis-doings, #2 when test firing he loaded the magazine to capacity. He chambered a round and it discharged. In the search for that perfect trigger pull just remember the designer gave you what he wanted and if you dont know what your doing do it by yourself at minimum

[@marknovak8255]

CLEAN triggers at any weight beat the crap out of crappy, light triggers. RETEST ALL DISCONNECTOR WORK.......caps for others, your point is noted for extra emphasis

[@lokichoki_]

@@marknovak8255 absolutely, thanks for the reply I Idolize your work.

[@paulnelson9907]

Sir; Thank you for bringing "God's" gun back to life! For the un knowing Brownells sells a plastic tool that will help prevent scratches at the slide stop when disassembling the gun. Again Thank you for conserving a real gun!

[@williammills7778]

Loved this video, I've owned one for years but you taught me some things I didn't know 😊

[@fredrickgustafsson4795]

anyone else smoke a cigar with mark while watching his videos ? Enjoying a RyJ Mille fleur to this one, as always great entertainment from Mark

[@misterexponential]

Black & Mild is all I can afford. Mark:😖

[@marknovak8255]

Great choice.

[@itatane]

I Smoke a pipe, if that's any consolation. Italian Brier on the outside and deep, dark cavendish within. Paired with a good cuppa coffee and it makes for a full bodied experience.

[@sand1991]

Just sent in my paperwork to the CMP for the second go around. Hopefully I will get a crack at all three grades. I don’t really want a piece of junk, but I really don’t want one that is refurbished and refinished. I’ve seen several unboxing of the best grade, and they look brand new. I’d love to have one like in the video.