Anycubic Kobra S1 Combo Rigorous Factory Testings！

[@jarrodlangford7692]

Honestly, impressed by the vid anycubic. Need more like this.

[@channelvr1293]

My very first printer was Anycubic... after 4 years still spitting out perfect prints... not once has it failed... now after more then 4 years I gave it to a architect student for free and he's using it every day for his studies. Now I bought a Qidi4plus... but I wish I had stuck with Anycubic... probably will sell it and run back to my first ❤

[@MHDHRacing]

Looks good, hopefully we see a comparison between this printer and the Bambu P1s soon somewhere 😁

[@772CODEMASTER]

My very first printer was an Anycubic Mega X. It was very reliable with good quality. I switched to Bambu P1S, but I'm gonna buy this, this video gave me confidence.

[@afbigfish1]

Bambu's final nail. sorry fan boys

[@Davids3DProjects]

It will be interesting comparing the Anycubi Kobra S1 to the Flashforge AD5X. The price between the two are very close.

[@SilentPCP]

Anycubic делает отличные принтеры, я 7 лет пользовался Kossel Linear Plus, пока не решил поменять его на Flashforge АD 5M PRO.

[@unemployedredneckhillbilly2023]

I was just looking at the K2Max but this is 1/3 the price and looks just as capable but smaller.

[@thomasyates8848]

I have a Bambu. My work has multiple Bambu's. We still have multiple Ultimakers. This looks like a Bambu copy. The motors, filament cutter, belt positioning etc. but if it's a good printer I'm all for it. Well done.

[@chipcamels]

Looks like K1/K1C

[@FortniteBlaster2]

it's also only $549 rn

[@nekrosoft13]

Not everything is a Bambu copy.

[@lukaskantor2645]

Samsung looks like copy of apple lol.

[@LilApe]

Bambu is a copy of a flashforge and qidi tech. So what's your point. Bambu lab wasn't the 1st to make an enclosed corexy printer you know.

[@KyleTechCorner]

Love to test out this printer! Wonder how it compares to my Bambu labs p1s

[@alkiskaraolis8111]

The motion system is not squared. Time 1:10 watch the right idles as the belt is moving up. I believe you did all those test and this looks like a honest video, but why isn't the belt moving on a plane?

[@hctsang4092]

Apparently it's a speed-up video.

[@chubbyboy2242]

Are you doing the same testing for the Kobra 3 Max?

[@dingdongdaddy589]

If you can’t beat Bambu, build one…

[@sebastianestevezcarvajal3008]

I went to say the same

[@elwiken00]

@@sebastianestevezcarvajal3008 Well, 3D printers have come a LONG way. I think at this point, we're going to start seeing a lot of the same hardware. The real difference will be in the software. It's going to be like phones! They're all pretty much identical hardware, but whoever holds the best software will be king. Excited to see where this goes.

[@kilo.sierra]

Can you please share with the class what you saw in this video that Bambu invented? Just because Bambu was the first corexy printer in an enclosure and the first multi material system you were exposed to doesn't mean they were the first. Let me guess.. you also think Apple is a groundbreakingly innovative company? 😂

[@dou8letap82]

Exactly what Bambu whole business model was.. just like everything that comes from China... . Knoc offs.... Good job

[@jwcin3d]

Anycubic was exist years before Bambu 👌

[@nurelarab]

Looks good!

[@timothypatrick5282]

What slicer does this use? Anycubic next I’m assuming?

[@iserlohner_tastings7169]

Now we will waiting till March 😅

[@rsebi2457]

Hab ihn heute vorbestellt. Ist mein erster 3D Drucker, hoffe wird kein rein Fall. 😅

[@iserlohner_tastings7169]

@ hab gestern morgen auch bestellt. Hoffe, die Software funktioniert vernünftig

[@FahriB87]

Habe momentan einen Ender 3 Max Neo und sehr zufrieden. Habe es gestern Nacht schon vorbestellt. Bin echt auf die Performance gespannt. Für den Preis der Hammer 😅👍

[@alchan5602]

You need to test having the boxed printer thrown out of the back of a moving truck at about 40km/h. That's how FedEx treats everything.

[@sk7fast]

What is being tested at 0:20 - 0:30 ?

[@Odacir]

if there are no leaks in the hotend, on apply pressure

[@GrumpyGramps3D]

The Kobra S1 Combo looks like a perfect replacement for my old Ender Printers. They are now inoperable and unfortunately, I had to shut down my 3D print business

[@kevinjanuud92]

does the ams still stop the print when it runs out or did you fix that at the hotend?

[@alin619]

if its as reliable as a Bambulab printer this would be amazing, especially with the multi color system.

[@oneanother1]

How much does this thing poop? It will be open source firmware right? I won't buy if its not open source firmware. I know creality will open source their k2 combo printer.

[@Fortizar]

When's the none combo coming out ?

[@kilo.sierra]

Bambu fanboys in the comments getting upset about competition in the marketplace is wild.

[@ineedgoodname]

They are incredibly late to the market. Creality, Bambu and many other companies have made identical machines to this, at the same price point. Every company is now just Copy Pasting each other, whether that started with Bambu or not.

[@lukaskantor2645]

​@ineedgoodname I started with prusa 9 years ago and now it is fun to watch all bambu boys, creality boys and others.. copier screams catch the copier.

[@bogdanmarinescu78]

@@lukaskantor2645 What's even funnier is how far ahead of Prusa most of them are now.

[@ineedgoodname]

@@bogdanmarinescu78to Prusa are definetely in my opinion set back compated to competition mainly because they are made in EU, driving the prices so high

[@bogdanmarinescu78]

@ineedgoodname It's not just that, lately they also have quite a bad reputation with their new releases. They are always delayed, rushed or both. Take the Core One. It was announced about 1.5 months ago and I've yet to see a single independent review. Which means that they didn't even send review units. And that's just sad.

[@jamestryon4561]

Just ordered this about 3 hours ago. Curious, does it use the same hotend as the Kobra 3? I have that also.

[@Arnos_3D]

Wait till march to deliver 😂

[@MandyEllifritz]

Yes and no. It appears that the hot block and nozzle are the same, but the heat break is different, and the thermistor and heater are now using one plug. I recall that it also uses a higher wattage heater to do the engineering materials.

[@jamestryon4561]

@@Arnos_3D actually Feb 5th-15th

[@jamestryon4561]

@@MandyEllifritz I guess I will wait until I get it. I see that they have 0.04, 0.06, and 0.08 hotends for my Kobra 3 on their website now.

[@Arnos_3D]

@ geekbuying says 3-5 days to deliver. Anycubic webpage says march.

[@alfskaar489]

Are the 3 Lead Screw independent level the bed ? a stepper motor on all ? independently?

[@gizmoguyar]

The z axis is a single lead screw + stepper. Leveling is done digitally.

[@predragbalorda]

It seems everyone is advertising their printers. Anycubic just shuts up and makes a better one. After my my photon mono x 4k sla being flawless for 3 years I think my next fda will be kobra s1

[@des4ster20]

Now I Upgrade my i3 Mega 🎉 (hope for TPU from anycube)

[@FortniteBlaster2]

This apparently uses 1,500 Watts, isn't that a crazy power draw compared to the X1's 135 average power draw

[@pixxyt8337]

El consumo total de energía depende de varios factores, como la duración de las impresiones y los ajustes utilizados. Basándonos en los datos generales: Anycubic Kobra S1 Consumo máximo: 400 W. Consumo promedio durante impresión: ~200-250 W (dependiendo de la temperatura de la cama y el extrusor). Bambu Lab X1 Carbon Consumo durante calentamiento inicial: ~1000 W (momentáneo, al calentar la cama caliente). Consumo promedio durante impresión: ~103-135 W. Consumo en reposo: ~8 W. --- ¿Cuál consume más? 1. En sesiones largas: La Anycubic Kobra S1 consume más debido a su mayor consumo promedio constante (~200-250 W frente a ~103-135 W de la Bambu Lab X1 Carbon). 2. En sesiones cortas: La Bambu Lab X1 Carbon podría consumir más momentáneamente, ya que su pico inicial de calentamiento puede alcanzar ~1000 W. En general, si tienes sesiones largas y continuas, la Anycubic Kobra S1 probablemente consuma más energía total. Por otro lado, la Bambu Lab X1 Carbon es más eficiente durante la impresión, aunque tiene picos iniciales más altos.

[@Odlanoel]

Maybe because of the heating coil on the AMS?

[@Effots1984]

1. Brand power vs. Actual Power Consumption The rated power of 1500 W indicates the maximum the unit can draw, usually during heating of the bed and hotend at the same time, which are the most energy-demanding components. The average power consumption during a normal print run is usually significantly lower, usually between 100-300 W, depending on: The temperature of the build plate and hotend. Print size and duration. How often components need to be reheated.

[@kimbuuu241]

Is it the new BambuLab P1Stole?

[@jimmying8172]

Waiting for the Plus or MAX!

[@iserlohner_tastings7169]

@@jimmying8172 or S2 😅

[@JebenOvajIgrac]

Copy -Paste Bambulab ??

[@regstamand9051]

That test to check for leaks on the hotend isn’t sufficient evidence that anything has been fixed. The leaks happens sometimes after hours of printing, vibration and force. The design is 💩go to a nozzle that’s comparable to a unicorn nozzle no more pipe that was the worse idea an who thought of it should be fired

[@maxheadroom4659]

awesome.

[@ANYCUBIC3D]

Thanks! Glad you like it.

[@TITAN3000]

Уже хочется)

[@halilyeliz403]

Thats printer is a mini Creality K2 XD

[@wrxsubaru02]

Copy/Paste

[@vukitanijum474]

hmmm...looks familiar🤔

[@Arnos_3D]

Waum immer was vorstellen ubd bestellbar machen obwohl es keine gibt. Wer will bis mörz darauf warten ?? Ich sicher nicht. Zudem sind 250er bedsize auch schon outdated. Und wenn er dann auch so schlecht läuft wie der Kobra 3 zu anfang dann prost Mahlzeit.

[@samezarus]

coooooooL

[@adrienchavatte]

Never again an Anycubic for me...

[@LilApe]

Even anycubic uses premium gates belts. RIP bambu lab, you're time has passed. you were too cheap to use even the most basic of premium components and its a reason for your high failure rates. Anycubic trust pilot score - 4.8 bambu lab trust pilot score - 1.4

[@chriswaldron2617]

Not much of a copy of the K2 is it!?