Anycubic m3 max | Review

[@ViralKiller]

this has a 7k screen, the cheaper Mono 2 has a 4k screen, but it is half the size...ergo they have the same level of detail right?

[@3DPrintingStorecoza]

More or less yes, because of pixel density, their x-y resolution would be mostly the same, there might be a slight difference but not one that would be noticable.

[@ademkarakoca9546]

hello, can you share an interest in the print settings?

[@3DPrintingStorecoza]

The settings are dependant on the type of resin you are using and the brand. But most standard resin print well at 2.5s to 3s per layer. I would use 6 intial layers at around 35s to 45s per layer as well.

[@rosssmith5731]

Hi I don't suppose you have an old version of this machines firmware. I updated mine to the latest version and now it barely works, (barely being never) Anycubic support are useless, so I currently have a giant Anycubic paperweight. Any help would be great.

[@beej5]

Just put whatever resin you want inside of the anycubic container. Problem solved :)

[@3DPrintingStorecoza]

That's not a bad idea, you just to make sure that you clean out the bottle thoroughly to make sure you don't mix the old resin with the new one.

[@shanecollett819]

This is actually my obstacle before deciding to buy this printer. This thought did cross my mind, have you done it yourself?