AP5 with Lee Sporting Lower and Super Safety

[@russiancommy]

Thank you for the info.

[@BobbumMan-i8t]

I went with a metal slip trip and had Meatbanana42069's slip trip extender printed. It prevents damage to your super safety cam and detent. It also replaces the need for the buffer and adds mass to slow down the bolt carrier. I think it's best to avoid locking piece changes if possible.

[@OutdoorLayman]

@@BobbumMan-i8t I agree with everything up until the locking pieces part. Specifically for ap5s shooting suppressed. I think it can be safer to go with a rcm 100 degree

[@russiancommy]

If you go with v2 or v3 he states you don't need it. I ordered v2 off SKO prints I'm still going to use the buffer, the website states you must use it on full size only though.

[@OutdoorLayman]

@@russiancommy you have to yes otherwise your bolt will lock up

[@battletank21]

​@OutdoorLayman The locking lug thing depends on the can, with a flow through can standard locking lug works best. for a standard can yes, change the lug.

[@TylerJames-gf8ms]

Cool video man. I have a similar set up. No super Safe. I love it. I like my MPX better tho. Do you like your AP5 or Stribog better? From the point of view of a defensive sub gun set up (truck gun, bag gun, edc etc…) Thank you!

[@OutdoorLayman]

@@TylerJames-gf8ms nothing beats the feeling of shooting a full size mp5/ variant BUT the stribog is a close second. If I had to trust my life to one or the other though, it’d be the stribog, I’ve literally never had a malfunction in like 2000 rounds with any ammo , it’s also basically gtg out of the box. Mp5, and especially clones can require some tuning and breaking in - as well another $250-$500 to modernize with a brace/ stock, rail, and optic mount.

[@TylerJames-gf8ms]

@ what about with sub sonic hollow points in the Stribog?

[@OutdoorLayman]

@ tbh I have only shot super sonic hollow points, maybe a couple boxes worth. Everything ran perfect. I do shoot flat nose subsonic quite a bit and those run great too

[@TylerJames-gf8ms]

@ thank you for your input. This really helps

[@cowmaneater1243]

sporting lower worth it even without the super safe?

[@OutdoorLayman]

@@cowmaneater1243 IMO I wouldn’t have bought it otherwise. But if you have money to burn then it is nice to have.

[@tdel8613]

theres cheaper 3d printed options than lee that you can use with super safety

[@OutdoorLayman]

@ this is true.

[@Arc30pistolas]

Can I put the super safety without the sporting lee lower

[@OutdoorLayman]

@@Arc30pistolas there are cheaper options out there. There are 3d printed options from vendors like skoprints, but if you want metal lee is the only option. It won’t work with the standard OEM lowery though

[@Arc30pistolas]

@ thanks for getting back to me

[@martinsteflik1329]

Mil spec trigger?

[@OutdoorLayman]

@@martinsteflik1329 yes

[@albertptran]

Total cost of build?

[@OutdoorLayman]

@@albertptran without optic or laser, like $1600

[@deepspacenine3278]

@@OutdoorLayman so how much of the buffer did cut off to slow it down

[@OutdoorLayman]

@ you can cut it down to like 1.9 inches. I wouldn’t go further. You can also round your hammer’s head and not need the buffer at all

[@Patriot_Cop]

@@OutdoorLayman Any chance you could show some video of the rounded hammer?

[@OutdoorLayman]

@ www.reddit.com/r/MP5/s/8lAVeTqK54