Cut/Gloss Comparison With These Top Shelf ONE STEPS!! Part 2! GLOSS Factor!

This the second video comparing these fantastic one step polishes. One step polishes are pad dependent. surround yourself with a few quality pads up and down the aggression scale, grab of these one steps, and you are in business!
3D ONE Hybrid cutting compound and finishing polish accelerate polishing performance. It has nano ceramic alumina abrasives that easily correct paint scratches by using a DA or high-speed rotary polisher. 3D One is a unique product: apply on a cutting pad to remove heavy scratches and then apply on a finishing pad to deliver an exceptional high gloss finish. It’s easy to use easy to clean up and it leaves the perfect finish every time. It works best when applied in a shaded area, but it is also sun-friendly.
3D One....www.amazon.com...
SONAX Cut & Finish is an innovative polish with an intense abrasive effect for quickly eradicating defective spots, such as dust occlusion, paint overspray and sanding marks following repair spraying. High abrasion with simultaneous good degree of shine, workable for a long time, with outstanding wipe off feature. Ideal for polishing sanded down surfaces. Removes sanding grooves made by P1500 abrasive paper. Silicone-free.
Sonax Cut & Finish...www.amazon.com...
The Last Cut is designed by a detailer for detailers and body shop users. Versatility is key and this product gives its user full control over aggression/finishing ability based on pad choice. Its main purpose is to remove scratches and swirls while leaving a glossy finish on light or dark colored painted/clear-coated surfaces. On harder paints, its one step capabilities can be explored. Best results are achieved using a Dual Action or Rotary Polisher. This Silicone free formula contains no fillers and is body shop safe.
The Last Cut....theragcompany....
Koch Chemie Fine Cut F6.01 - Fine polishing compound, silicone-oil-free
Intelligent machine polish of the latest generation with unique aluminium oxide quality. The intelligent grain size ensures very quick, complete removal of wash system scratches and similar traces of use and gives the paintwork a long-lasting deep sheen. Sanding marks left behind by 2500 grade sanding media are removed effortlessly. Fine Cut F6.01 is therefore ideally suited for perfect reconditioning of medium to heavily weathered paintwork. Perfectly coordinated for the treatment of scratch-proof paint.
Koch Chemie F6 01........www.amazon.com...
LVR 500 Flawless Cut was designed to work flawlessly with the new age of Dual Action Polishers, Rotaries and Buffers. LVR 500 Flawless cuts was designed to be very user friendly and work with the pad you are using. For a heavier cut, use a firm foam pad or a wool cutting pad. For a medium or lighter cut, use a Uro-Fiber Pad or a Green Better Edge Light Cutting Pad. This incredible formula cuts lightning fast and stays incredibly wet longer so you can really work the paint. LVR 500 Flawless Cut has zero dusting for a quick clean-up saving both time and money!
LVR 500 Flawless Cut....877askxtreme.c...
Training Session At Apex Detail!! .......apexsurfacepro...
Data sheet and resource page for products by Henry Freeman! docs.google.co...
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 946245059134747
#apexautodetail #paintcorrection #autodetailing

[@gnawty4662]

I’m getting a one-step done after educating myself on this channel. Went to the detail shop today and they said a multi-step would be ideal, but a one step will be fine. SAVE THE CLEAR COAT

[@TheBLT16]

Absolutely love the past few videos that you have done. This is what I live for. These and all you polishing how to videos are my favorite type of videos that you do. You sir are a cut above. Thank you Mr. Brian. 👍👍👍

[@TheBLT16]

One more thing.... Would love to see a break down of the Dewalt Polisher that you are using in this video. We are do for a new polisher spotlight video. 👍👌

[@Carlos.Rivera]

For me, Cut & Finish paired with orange pad is money in the bank

[@high-defdetailing1485]

I've been doing lots of Sonax Cut and Finish on blue HDO pads and have been loving the results. 3D One is still my tried-and-true though as it works on just about everything!

[@kimnewling5728]

My opinion is you just can't go wrong with any of these. Technology is changing rapidly. Hopefully these companies continue to help us with the ever thinning of the clearcoat.

[@craigandrus327]

I enjoyed the test. Personally, I use 3D One more than any other. It always delivers for me.

[@marksafady1059]

All very close. 3D One I love! I just picked up P6 AIO and the KC pads to match.

[@SittingWithDogs]

Brian in the AIO test can you include Blackfire Thanks

[@icebmwpower]

*You’re simply the best!* 🥇🏆 I would like to see your part 1 & part 2 vids about your favourite products (from washing till the protection) in 2021. PS. You have posted a 2 part vid about 2-3 years ago and I believe the things has changed since then.

[@KyleFonrose]

I 2nd this!

[@neilwalker5041]

Great series which gives everyone a lot to think about. I could use any of these products but I find myself enjoying Koch Chemie products a lot lately.

[@knightautopcd]

Have to say 3D One took the prize - def want to see Angelwax Regenerate in the next round of one steps (think I said that already) and I’m sure you’ll have enigma AIO in the AIO shootout

[@Bull1the1Great]

Regenerate is a joy to work with ... Would love to see that vid too ...

[@DjBann]

This is my go-to for almost all one-step jobs, minus super soft clear.

[@johnketuroskey6293]

we love u for sharing all your experience and knowledge - your how to methods - to achieve the best results. its what we love about u...showing us the "how-to" and the products that work the best to get us there.....THANK YOU

[@bigdfig6083]

Love it! Thanks for equalizing the audio, maestro. Production and content are top tier. The resetting of customer expectations is such a valuable skill to poses. It has application across sundry industries. As for one-steps, seems like they've gotten to where marketing will be the key to their sales. Looking to lower the times on my corrections, but the choice for a one-step still eludes me. I'll be on the lookout for the coming comparisons.

[@abelcelestinjr8810]

Brian another good demo video 👏🏽👍🏾on the one step, these comparison videos every now and then is much appreciated

[@bhcamaro2002]

Haven't had any issues with 3D1, great product!

[@joseramirez2673]

Turtle wax 1 and done

[@OO7JAMS]

F6.01 👌 In your AIO test can you included Rupes Uno Protect & Koch Chemie P6 👍

[@ddautodetailing]

3D1 and KC looked the best to me here! Can't wait to see the AIO's! Xtreme Solutions Trifecta possibly?

[@danmorrissette4814]

in the all in one, i would like to see Griots Garage Finish Sealant... if possible! or Angelwax Enigma maybe? im sure you have many to choose from! lol! :-)

[@millerdetailing4176]

Really great comparison Brian this was an awesome set of videos thank you.

[@tommyholt3465]

I’d really like to see the Optimum polishing fluids in all these tests.

[@ionelbanu4451]

I had doubts about Koch Chemie but you changed my mind. I'm going to try 3D One also. Thank you.

[@michaelcampbell01985]

Finally we get to see a rotary cut and finish. I've got one that I've never used because I'm not sure of the products best for a rotary. I'd like to see a budget friendly weekend warrior about to go to a car show video. Thanks for all the awesome informational videos.

[@charlesarmstrong3536]

This vid has the cordless dual action

[@bstewartexecutivecarcare3797]

Thank you for sharing this information. I was a bit disappointed that Extreme Solutions didn’t fare better as I like to use some of their products to finish (Finale or Helios). You are so correct about being realistic with customers as to what they should expect and about what we see and what the average person sees. At least I tend to be more critical of my work (chasing perfection) than what a customer is happy with. Phil @Miranda talks a lot about this in his videos. I don’t like having to tell a customer that part of their car has been repaired and repainted (which we couldn’t see when dirty) but once cleaned and polished is obvious. Anyway thanks again for the information 👍✌️☮️

[@johnpivovarnik9678]

3D one is a great product. I also use Griots liquid wax 3-in-1 it does a real nice job for the price. Another great video loads of information with no cost . Thanks Brian 👍

[@charlesarmstrong3536]

Just remember griots 3 in 1 leaves protection and the polishes in this vid leave no protection.

[@fastmonaro05]

Basically the Koch Chemi, TLC & 3D are virtually identical. Just goes to show how good those 50/50 pads are in cutting and finishing. A true one pad does it all. I live in Australia and it would come down to the cost to really separate each of them. Not sure what is the cheapest in the US. In relation to ultimate gloss, if you change to a finishing pad, would it again bump up the Gloss???? Still very impressed with all of them. Good vid.

[@kylefraser4280]

I have the same question. I would imagine a finishing pad would bump up the gloss, and I'm not sure why anyone would go about using a microfiber pad for polishing. Will it work? Yes, but theres no way it works as well as a soft finishing foam pad.

[@timblackwell3196]

Fantastic. Love these video Brian. Thank you

[@davidvelez6923]

UHD Virtus 497 ... Is a beast... Cut and Finish very very Good

[@lifeofbrian9511]

Excellent series!!

[@adamcoe]

Bought 3D One on your recommend Brian, and looks like I made a great choice. Did a well cared for but very swirled Grand Caravan with it and it looked damn near brand new afterwards.

[@tomneumann5879]

Excellent video thank you for sharing your knowledge. How about Scholl’s S20 in your next round of 1-steps

[@royaltyautodetailing]

I'd really like to see you combine LVR321 Knockout and LVR367 ICE on the same pad! Thats my go to 1 hitter quieter.

[@snail415]

321 is an amazing tool in the arsenal. When you’re dealing with an older vehicle that deserved a better owner, 321 makes fast work of any issues short of orange peel. Can’t recommend it enough.

[@mikeallen2065]

Great job as usual.

[@jasonwinslow3543]

3D One for the win. It seemed like TLC and KC had better cut, so the best option is dependent on the situation at hand, as you pointed out at the beginning of the video.

[@Chris-wb7ni]

Still a huge 3D fan. As a matter of fact I just bought a bottle to help out my neighbor with his Ford f350

[@MNpicker]

I usually grab 3D one for one steps.. but have been using Oberk supreme cut and uro-fiber lately..it finishes down very nicely.. seems to do the trick for me👍

[@mikesmith4987]

I'm sticking with my 3D one as for the all in one you already mentioned the turtle wax so I'm good great series by the way

[@johnsortino]

While the video is comparing apples to apples fairly, are we not seeing the full potential of their gloss enhancement capabilities, since, as I understand it, one steps are, by nature, diminishing polishes? As such, unless the polish is worked over with multiple passes, it is still mostly cutting rather than getting to the polishing stage, no?

[@yanniobkirk5744]

1 steps are not all DAT. 3D ONE is not diminishing. But your point about polishing long enough to break apart the abrasives is a good one.

[@charlesarmstrong3536]

Some use smat or super micro abrasive technology .

[@morkovetz]

People! He did not use a one step product from Koch Chemie! He used the only cut variant. Koch Chemie also offers P6.01 this is theirs "One step" compound, it also contains protections and enhancing gloss ingredints.

[@bronx1877]

Love videos Keep Them Coming. Would love to see a video on best protection for paint for mobile detailers in your opinion since it’s outside where it’s not the optimal setting

[@bigd9848]

Excellently always Brian ✊

[@kirbyschneider4187]

Thank you Brian!

[@youtubingman5986]

Have u tried 3D's ceramic coating yet?

[@jcoul1sc]

Great video, they all seemed easy to wipe off, was sonar the best

[@ClearViewSolutionsMS]

Awesome video. 3d One is my go to, but I won't to get my hands on Xtreme Solutions and Koch Chemie

[@ronnie225ph]

Hi Brian. Can you please add to you comparison list the Rupes DA compound line, like the DA Fine and UNO pure. I haven't seen a video comparison of Rupes and Koch Chemie. Thanks

[@karlinwilliamson9329]

Always valuable information. Would like to see turtle wax hybrid solutions one and done

[@peterlaskiewicz8252]

I did Sonax perfect finish in 2 stages with an Orange Lake County CCS Pad, and then a White CCS polishing pad. Turned out incredible. Almost perfect, except occasional microsratches. Any recomendations on a finishing finishing polish?

[@SS95170]

Could you have a look at Scholl Concepts s20 Black?

[@larrydavisj]

Producing gloss units that were very close to each other I'm having a tough time picking a favorite. I would use any of them. Since I have 3D ONE on hand, I'll stick with it and keep producing great results. Thanks Brian!

[@larrythedetailer8748]

Not to mention the uro fiber pad was designed for the 3D one polishing compound.☝🏾 Great combination none the less 💪🏾💪🏾💪🏾 Kock chimie and 3D on is really all you will ever need for today’s consumers. With a large variety of pads to go with them 🤙🏾

[@danlc95]

Those pads came out in 2016. 3D ONE came out in 2018. 3D recommends their own pads for use with their chemicals.

[@BRITTGYPSY]

I suggest Blackfire one step and McKee’s 37 360 Ceramic. I’ve had great results using 3D One since you introduced us to it a few years ago. Watched you use it multiple times and gave it a try. Always appreciate you showing us some of what’s out there. So many choices and even though you help us narrow it down it can still be hard to decide what to purchase. Thanks Brian!

[@charlesarmstrong3536]

@@BRITTGYPSY the names are confusing, blackfire one step is a great all in one that leaves a sealant on the paint. The one step polishes in this vid do not leave any paint protection.

[@michaelbailey747]

Hey Brian great channel you have 👍. Learning lots from these videos. Why don't you take the best finishing polishes of each company's and go over these and see which ones get you closest to 100 GU? example xtreme solutions has 403 for dark or 404 for light colors or 496 finale. On my car I did a 3d one with 50/50 uro pad then, XS 403 with a lake country black finishing pad. Then put TW graphene flex wax, followed with XS poly seal, and last was XS black diamond past wax and it's hitting in the 101-105 GU. People look at it and ask me what it cost to have an older(2009) car repainted lol.

[@richardseem7948]

Amazing video and product review good friend. Imo 3d 1 took 1st.maybe next video throw in tw 1and done and let's not forget AW renegade..talk about ur bench mark when all ur 1st video was these.enjoyed them than and 2day..b well good friend

[@tone91402]

Angelwax aio is my favorite at the moment

[@onlinevisitor]

It looks like it is the same panel that was used in the first video, same pads, same polishes, same speed and same pressure. How come that in this video the paint got so much glossier than in the first video? What changed that brought up such a difference? Where are the scratches that were not removed in the cutting video, how come they disappeared? It feels like this video was filmed first followed by the cutting video. Thank you

[@chrisryan8894]

Is that a dewalt polisher ? Would love to see a review on that !

[@marioskosmidhs9454]

Great video.

[@stevewestphal7515]

Based upon your experience over the last few years... how would you go about treating a brand new vehicle? What product would you recommend? This vehicle will be car washed several times per week as well. Is it worth getting ceramic done professionally or more optimal to use spray on's regularly?

[@alanwallace3253]

Nice series , Aloha from Maui

[@apexdetail85]

Aloha oe

[@onrdetailingnews802]

Great video buddy tfs

[@Ike-yq3gf]

Thanks brian

[@danieldiamond7790]

I've been using zvizzer one, absolutely brilliant one step. I think I read somewhere that its either the same abrasives as koch or manufactured by koch. Either way I've been really happy with it on all sorts of clear. Would love to see it feature if you do an AIO series.

[@brentaviouscherry1201]

Hey Daniel where did you get your hands on that Zvizzer one ?

[@darjonvanommeren1244]

You’re right there. Zvizzer is Made nu koch chemie, but the formulation of Zvizzer contains Some more oils than the original koch formulation. I got a sample from Zvizzer back in the day and the bottle said Zvizzer medium cut (f5.01)

[@KingRockets]

Has any product whether its a polish or topper or coating, ever give a gloss rating of 95+?!

[@Ichabod_Jericho]

Haven’t you used CSI polish? Auto Fetish Detail (Darren) is always bragging about it! Scientifically the optimal all-in-one! 😉

[@nicksdragon6929]

Rules DA Fine and Coarse

[@judeperez7897]

With these one steps - you mentioned results and improvement is very pad dependent, is there a general rule of thumb with these solutions? Do you start with a mild-mod cutting pad? Do you start with an aggressive polishing pad?

[@kylefraser4280]

I have always used a fi fishing foam pad when polishing. And a heavy foam or microfiber when cutting. Wouldnt using a foam finishing pad produce a higher gloss??

[@Nektopoulo]

Rupes Uno Protect, I've watch your video from about a year about, how about throwing it into the mix against some other All-In-Ones

[@zenon3021]

are there any good one-step polishes WITHOUT fillers? Something that'll remove the swirl marks for a really long time? (Whereas fillers just hide the swirls for the short-term until the filler washes away)

[@goldenbear31]

Hi Brian, just wondering how you finished the correction after the first video? Did you use same product and pad with just more passes? Thanks again!

[@Coffeedad]

Have you done any of these with 3d speed comparisons?

[@caryd.5342]

As forever your "grasshopper"...first and foremost...my eternal love and respect. (I haven't witnessed) a "CSI Ceramic X" test. I get it if there is a personal issue there...but honestly you have never given this an actual nod. Just curious if this is actually worth a try.

[@danlc95]

He's mentioned in the comments section of other videos that he wasn't impressed with it. It might have had too much dust for him.

[@alanmorelli1426]

Maybe throw in 3D HD Speed in the AIO comparison.

[@charlesarmstrong3536]

It's been reviewed many times on youtube, it is a great product if you like waxes.

[@alanmorelli1426]

@@charlesarmstrong3536 Thanks Charles!

[@kenwithrow5157]

Brian, another great video. Question what model is the polisher you used here?

[@apexdetail85]

www.homedepot.com/p/DEWALT-20-Volt-MAX-XR-Cordless-Brushless-5-in-Variable-Speed-Random-Orbit-Polisher-Tool-Only-with-20-Volt-Li-Ion-5Ah-Battery-DCM848BW205/316287187?mtc=Shopping-B-F_D25T-B-D25T-025_009_PORT_POWER-NA-NA-NA-SMART-NA-NA-PortablePower&cm_mmc=Shopping-B-F_D25T-B-D25T-025_009_PORT_POWER-NA-NA-NA-SMART-NA-NA-PortablePower-71700000086134208-58700007341211180-92700065813629957&msclkid=91cfdfad052616e1096bbef1e1810c4d&gclid=91cfdfad052616e1096bbef1e1810c4d&gclsrc=3p.ds

[@kenwithrow5157]

Brian where can I find your detailing class schedule??

[@seabrew1]

NV Precision maybe?

[@dcstang67]

How does the 3dOne compound you used compare to the 3dOne HD Cut? What type of pad are you using?

[@johnketuroskey6293]

morning my friend....hope u have room to include beasleys one-step z1 zano....corrects/protects -infused with titanium and silicone oxides/leaves bonding matrix to enhance durability of any coating/sealant. fyi - replaced 3D one as mike phillips(autogeek) go to for one steps....its all he will use

[@richardseem7948]

I'm taking that panel is med clear?By lookn at results it shows what clear after using 50/50 uro pad isn't that hazy.would u say as well?

[@realgunzz4397]

Want to see adams one step polish

[@kimnewling5728]

You getting coatings back in stock anytime soon?

[@blitzedpeacockbassfishing984]

Brian, what pads would you recommend for a DA polisher to paint correct 2018 mustang, and it’s black. Paint is in good shape overall, just minor swirling which stands out like a sore thumb on black paint.

[@charlesarmstrong3536]

I am no pro, so take this for what it's worth. Your question needs more info to answer. What are you using to polish with? DA? Long throw, short throw? If you don't polish all the time I would start with a light polish pad and step up to a light cutting pad if needed. It depends on your polisher and polish. What do you want to apply to the paint for protection? Wax? Synthetic Sealant? Ceramic? Don't chase every scratch or you will go through the clear or cause premature clear failure if it gets to thin. Car makers have been putting barely the minimum clear on cars the last few years.

[@blitzedpeacockbassfishing984]

@@charlesarmstrong3536 thanks for the insight. I have a little bit of experience as I paint corrected and ceramic coated my car with Brian’s metal oxide coating. Corvettes have super hard clear, mustangs I believe are softer. I use the Adam’s swirl killer 15mm DA polisher. On my car I had to use urofiber 50/50 pads and a heavy compound. Basically trying to get confirmation that the clear is softer on the mustangs and a pad recommendation,

[@charlesarmstrong3536]

@@blitzedpeacockbassfishing984 I would try a polishing pad first, the griots microfiber pads are available at most autozones and they work good for me on medium to hard clears. Or any name brand polishing pad.

[@samochoa6733]

How you like that dewalt polisher? How is it when it comes to vibrations?

[@apexdetail85]

I really enjoy it. It is so heavy...you feel no vibration. LOL

[@livnrossome]

I've been using 3D one for quite a while with the uro fiber. I wonder what the difference would be with something like the classic rupes yellow foam pad with the one steps.

[@danlc95]

Doesn't cut as much, in the same amount of time. It leaves a really nice finish though.

[@livnrossome]

@@danlc95 I love the cut of urofiber, I was thinking the rupes yellow foam may leave a slightly higher GU where it doesn't cut as much

[@danlc95]

@@livnrossome - I believe that 100%. Give the Uro-Fiber Finisher a try. It's the pad with all black fibers, and they're fluffier. I also found that Menzerna 2500, and Jescar Medium cut very well and finished beautifully with those yellow pads.

[@tonycruciani2550]

Rupes line of da polishes

[@richsmith3120]

LVR 503 Dynamic Cut

[@SittingWithDogs]

Too dusty and doesn’t diminish to a polish

[@joblo2299]

Jokes

[@1stfrompuertorico568]

1st