Cut-Finish-Protect! ALL In One Polishes. 4 Way Comparison!! Rupes, P&S, Angelwax, Koch Chemie.

All in one polishes can cut, finish, and protect the finish of your car, truck, or motorcycle. In the last few videos, we have talked about paint enhancements and one step polishes. Now we will look at four fantastic All-In-One polishes that will turn that paint around and give it deep gloss and protection.
Koch Chemie P6 01...www.amazon.com...
P & S UltraCoat Polish....www.amazon.com...
Angelwax Enigma AIO....www.amazon.com...
Rupes UNO...www.amazon.com...
Urofiber Pads.....www.amazon.com...
Follow The Apex Detail Support Group on Face Book for any questions, concerns or if you are in need of general detailing knowledge whatsoever!! / 946245059134747
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 9462450
#autodetailing #paintcorrection #apexautodetail

[@apexdetail85]

Which AIO do you prefer?

[@kimnewling5728]

I've used Griots Finishing Sealant and it was just ok. I guess if I'm gonna go through the work of polishing, I'm going to put much better protection on the vehicle. Yeah it adds a step, but it doesn't take that long. Thx for cool video.

[@404notfound.....]

Rupes!!

[@geirnaert]

Angelwax Enigma AIO 👍❤

[@ronayotte3571]

I like Rupes Uno Protect... I let it set up for about a half hour, then use Gtechniq C2 Liquid Crystal to remove it. I use this combo if the client is cleaning up the car for a potential trade or sale.

[@joeschmoe6908]

None. I waste more time trying to clean this crap out of pads than I ever save by skipping a protection step at the end. And as you noted the protection is minimal anyway. I can do an enhancement and a spray wax and get similar correction with better protection in less time.

[@LightningDelta]

Griots Ceramic All In One is truly impressive! I’ve applied it to a handful of vehicles and maintenance is a breeze! A month in and they are working like new!

[@J1Z06]

I'm not a business, so I go all out and finish with ceramic coatings. I have a bunch of AIO's... never used them. As usual, Thank You for sharing this. You're very thorough. Clearly one of the best on the internet! Enjoy the weekend.

[@404notfound.....]

I have used all these products with the exception of P&S, thanks brian for doing this as I was curious myself on the durability side. Usually I do this & not see the vehicle for some time.

[@devonforsure260]

Very informative. My opinion is that id stay away from AIOs and just get a good product on top after a few light passes for short term protection

[@altillman1448]

For AIO we use 3D Speed, Rupes Uno Protect, and Ethos Pro Ceramic Wax.

[@ceerock8088]

Brian you are too nice doing these kinda of testing for us. 🤙

[@apexdetail85]

Its my pleasure.

[@derrickabare9986]

Another good video brian. Ty . I don't offer all in ones . Not only do I want my customers smiling when they pick up their vehicle but also smiling a month, 3 months or whatever down the road . I figure if I'm putting machine to paint I'm going to get the most out of it within what the customers budget is and just spend a little more time laying down some form of protection. Currently my go to is one and done and a couple different ones from malco .

[@jjjjjjjjjjjhjjjjjhjj]

Rupes uno protect, great product for the average customer and aside from coating maintenance or a full blown correction the uno protect is what we use on every basic job the customers love the results

[@MNpicker]

I will be honest.. I don't mess with AIO's but yes... this was still a great and very informative video and I thoroughly enjoyed it!! Seriously..This is good stuff 👍

[@johnmelling9950]

3D Speed for me. It just looks better than all the others I've tried and its just so easy to use.

[@Greg_P611]

Blackfire One Step is a great AIO With strong protection

[@edfaizal80]

Uno protect is very pad dependent. If i want more cutting power, I use a wool pad but only suitable for a very light swirls, micro marring and light watermarks.even with wool pad, it will take more time to remove the defects that I mentioned than using a compound. The pad will become sticky and I usually use a compressed air to clean it regularly and wash it with a multi purpose cleaner and water after I finish using it. Suitable for customers who just want their car to look shiny and don’t have the time to leave their car for a proper paint corrections which usually take a day or two.Protection wise hydrophobic behavior usually gone after 5 wash and it becomes hydrophilic after that but the gloss last for a long time. This is my experience with my customers. I try to avoid doing a multiple paint corrections because it is very time consuming. As much as I enjoy looking at the end result, but doing it is a different story.If I can get the same result with only a one step, I will go for it.

[@tyuspoletti]

Do you still recommend it over the others? I’m thinking p&s and finish it off with bead maker

[@edfaizal80]

@@tyuspoletti yes because of the gloss. I use it to maintain my cars and usually top it off with wax(as sealant) to prolong the glossy look.

[@tyuspoletti]

@@edfaizal80 good to know. I’ve been trying to learn everything I can before starting a full on mobile detailing business this upcoming spring

[@edfaizal80]

@@tyuspoletti good luck and all the best

[@rdeh1678]

I have trst many of these the best i have found so far is the 3-d speed all in one works great for detailers

[@tonyosullivan2382]

I recently tried out zvizzer one. It really is a fantastic product which I'd highly recommend. Nice bit of cut, easy buff and a noticeably glossy finish. It's also holding up well too. Easily you would get 6 months out of it.

[@GMDetails]

Great video Bryan, couldn’t have come at a better time as I need to polish my windscreen so fantastic tips on laminated glass, thank you 👍

[@mikeyp2447]

Keep em coming B!!

[@apexdetail85]

Will do!!

[@chrissemsch8781]

Might have to try one of those. Thanks for the video Brian

[@millerdetailing4176]

Another great video comparison Brian hope you have a great weekend.

[@apexdetail85]

Thanks, you too!

[@Dusty.Spinster]

I love how easy to use uno protect is. It’s like money in a bottle.

[@lutherprince9304]

Thanks Brian! I’m fixing to do this to my car so the info was greatly appreciated!⭐️⭐️⭐️⭐️⭐️

[@DetailsNMe]

Sonax AIO has been a pleasure to use

[@tomchinigo5014]

Great video Brian !! My favorite All In One is Uno Protect but I do add a separate protection in the end. I may try the Koch Chemie All In One. Thanks for the content.

[@therealmatthewsmith]

Still using 3d Speed. I love CarPro Essence too even though I do not expect it to cut much.

[@martynedwards1493]

I mostly prep cars for sale at a high end used car dealer. 90% of what I do are AIO’s P6.01 & Eurofibre pad does it for me, no need to look any further

[@johnc9909]

Hey Brian big fan of the channel! One of your statements over the years about being careful about chasing perfection I use a lot when I'm working on my cars and in everyday life in general. It's tiring being a perfectionist and can get you in big trouble. My question is you say you don't do many multi steps anymore just coatings and films but isn't it recommended to do some sort of correction before the coatng is applied if so what is your normal process depending on condition of the paint. Thanks!

[@jonschmunk7719]

Great content Brian. Much appreciated.

[@apexdetail85]

My pleasure!

[@aj401]

I recently stumbled upon your videos in the youtube 🐰🕳 Great content and comparrison between products!!

[@betametabravo3547]

I don’t use them often... I prefer my own protection.

[@apexdetail85]

Same here.

[@daniellanglois4378]

Its just time saving. Not the best protection

[@coreymerritt7742]

Thanks Brian great video for the most part they are relatively seem to be similar products I guess it would be by choice on what to buy hard decision lately I’ve been using the one and done or 3d1 and phoenix eod and finishing with a good wax

[@kirbyschneider4187]

Thank you Brian!

[@apexdetail85]

My pleasure!

[@Admin-ie9hp]

I use Uno protect, followed up with turtle Wax seal and shine

[@apexdetail85]

Good choice.

[@Centaur008]

I feel they have good protection but it's very likely diminished with the heat from the polishing action. I guess one could do one last quick pass with fresh polish but that kind of defeats the purpose and wastes polish; might as well use something like Technicians Choice ceramic detail real quick at the end. So far my only AIO has been 3D SPEED.

[@donaldgreen9292]

I would say P&S Playmaker it has beadmaker infused is a good product.

[@captainamericaamerica8090]

Turtle wax makes great ceramic waxes and car shampoos.

[@kevkav5680]

Excellent video again Brian , what do you think of 3d speed polish?

[@apexdetail85]

An old reliable....not bad.

[@CHCH179]

Great video but a little disappointed that 3D speed is not in. Currently, both my favourite. 3D speed easier to buff out but lack the durability of uno protect

[@apexdetail85]

An old reliable...not a bad choice.

[@hartlanddetailer5670]

In my shop, we use 3D Speed, 3D One & Megs 205...

[@apexdetail85]

Good choices.

[@richardseem7948]

Awesome video/comparison brother. Going back 2 the beginning love it.b well good friend

[@apexdetail85]

Thanks 👍

[@user-wr6fk1jr9f]

Recently I have been researching on options for a compound/polish combo or AIO suitable for a soft Honda Civic white paint with minimal dusting and is beginner friendly to use. I was thinking Sonax perfect finish, 3D one, AngelWax all with an orange/white Pad or auto-fibre 50/50 pad, carpro essence or Carpro Fixer all as 1 steps. Also not sure about which products to use as 2 steps for soft white Honda paint and would appreciate advice

[@BigCarKilla]

Would love to see where the Griots all in one sits among these.

[@apexdetail85]

I put it on the list.

[@henryhong8863]

I’m going to have two step paint correction on my 2007 Infiniti m45. Which products do you recommend? How about 3D ACA 510 FInish with 3D ACA 520. What is your recommendations

[@chrisryan8894]

So if these all have protection, you can’t go straight to a ceramic spray coating from here ?

[@armandosautodetailingllcak4513]

Any suggestions on how to remove ink pen from car paint?

[@Flemishify]

Hello, quick question. I find it usually takes me about a year to go through a Polish or a compound and I find that when it sits for a while even if I vigorously shake the bottle before use I get very mixed results. Sometimes it won't cut at all and sometimes it leaves scratches and it cuts very well. Should I be putting it in a tub so that I can manually mix it every time before use? Thanks

[@Carlos.Rivera]

Your thoughts on Griots All in one ceramic

[@apexdetail85]

On the short list of reviews.

[@henryhong8863]

Which two step do you prefer?

[@rapidgarage7620]

WHAT PRODUCT DO YOU FEEL CUT THE BEST

[@orthodox1717]

Does the gloss amount dictate how much each product cut?

[@apexdetail85]

More so how they finish...which is most important with this category.

[@moejr14]

Is meguiars sealant any good to use after an AIO?

[@apexdetail85]

Sure.

[@sergerobitaille6065]

Outside mobile detailer which one is the best ( direct sunlight)

[@altillman1448]

3D Speed hands down.

[@GarrettHollis30]

I have a ton of experience mobile paint correction with hd speed and the rupes uno both are great in direct sunlight, but hd speed definitely has the edge in direct sunlight especially ease of use part of the equation. Added note also I too use and love the euro fiber 50/50 pads. The only thing about those (from my personal experience) compared to using any kind of foam pad is it seems to break down the protection more in the aio's compared to again any kind of foam pad when correcting.

[@gustavocastillo8892]

P6o1 works great too on direct sunlight a did a whole escalade outdoors in vegas

[@xynstav]

is this m15 or m21?

[@Mrjozz011]

How much do you charge for an all in one on a sedan?

[@apexdetail85]

Around $450 when we did them.

[@tommartin1223]

No love for speed or the other 3d. I think. 505?

[@subrotoxing8214]

I love them .. great for soft and sticky paint.

[@apexdetail85]

Yes....another great option.

[@mutatedgenome]

Anyone still use Zaino AIO?

[@speedtiktokclips]

Do the 3d aca really cut down too 500

[@apexdetail85]

I would say 800

[@speedtiktokclips]

I meant 1000 but I did I have Koch h901 but I don't know if Koch h901 is a s good as 3d aca 500 do u agree

[@speedtiktokclips]

?

[@speedtiktokclips]

I was asking is 3daca 500 better than kochh901

[@oursulaert]

1st uk Thank you Brian

[@lifeofbrian9511]

😁👍🏻

[@georgiannegooday9108]

poorboys all in one

[@richardseem7948]

Results speak for themselves...... .

[@1stfrompuertorico568]

1st