Just finished using the jig and the file Apex sales to fit a gunsmith barrel to M&P 2.0. In my case no filing needed at barrel muzzle; less than 10 min to fit at the barrel hood but about an hour and half to fit the bottom locking surface. It was a fun and easy project, thanks for the awesome video and the written instructions available online at opplanet. I will recommend only the gunsmith barrel and spend the time to fit it, semi-drop is a hit or miss.
@BobbyJaGGerJacK2 жыл бұрын
Just finished using this to fit my barrel. On and off it took me about 5 hours passively while doing other stuff. I had to file down a great deal on both areas and my s&w is new so maybe the fact that I haven't really broken it in yet added to the time. What I will say is to those thinking of going to a gunsmith, it's cheaper to just grab the jig & the file from Apex for $90 and combine it with a little elbow grease and patience and you'll save a few bucks by not having to have a professional gunsmith do it but aside from that, you'll want to keep this tool and use it the next time you're fitting a barrel.
@d3rylle3 жыл бұрын
Thank you for this video. I followed the directions step by step. I did not need to remove material off the Barrel part (a) But i did need to remove material to Fit (b) and (c). Now my 9mm full size 5" barrel, shoots perfectly and functions perfectly in my SW MP40 2.0 Performance Center Pro Series. 200 rounds sent at the range yesterday, perfect. Thank you again :D
@apextactical3 жыл бұрын
Great to hear.
@apextactical3 жыл бұрын
@Joe Biden's Demented As noted on the product page, the FN 509 barrel does not require fitting.
@Underground3084 жыл бұрын
This is perfect! I literally ordered one 2 days ago! I only have an angle grinder though. :)
@damon3232 жыл бұрын
LOL!! Bust out the cutting torch while you’re at it😂
@S3cK5hun87 ай бұрын
Definitely plan on getting the jig and a new barrel for my M2.0 Compact.
@shane_16195 ай бұрын
This video was a HUGE help!
@TROY-MCCLURE-1991 Жыл бұрын
Will these barrels be a necessary upgrade for the latest optics ready 2.0s?
@ZDriver19963 жыл бұрын
Short version: Just finished testing my APEX Semi Drop in barrel on a M&P 9mm. It is stupid accurate. I have 2 factory M&P barrels and both their tolerances on fitment are too loose (noticeably). So much so it actually made me angry at Smith & Wesson for making such subpar barrels. From here on out all my pistol barrels will be APEX barrel semi drop ins.
@apextactical3 жыл бұрын
It's not exactly the tolerance of the factory barrel, but the slide and frame combined. Our barrel is accurate because it dramatically increases the dwell time. To do that the barrel has to be fitted to both the slide and the barrel, and each M&P is different with different slide to frame fit. Glad you like the Apex Grade Barrel.
@slinkyrobb2 жыл бұрын
I think I might have to try for a gunsmith fit barrel soon. My slide tolerance is so loose the semi drop in literally dropped in with extra play in every direction. Even tried a new locking block with not much difference
@andrewkenseth48146 ай бұрын
Working on my barrel now. What did you use to polish the barrel after using the file?
@jeffshootsstuff4 жыл бұрын
Great company and great video.
@apextactical4 жыл бұрын
Thanks
@richardv33273 жыл бұрын
My question is how did you polish the bottom like you said after you got it down to the proper height do you need power tools to polish
@apextactical3 жыл бұрын
No, do not use power tools. Just a very, very fine grit paper.
@pickin4you4 жыл бұрын
You should have posted a link to the tools you used for the fitting. Barrel, fitting jig and file if you sell them.
@fernandomarcano4908 Жыл бұрын
Will this jig work on a Glock barrel? Only see this for M&p and the other jig for 1911.
@S3cK5hun87 ай бұрын
What's the difference between a semi drop in barrel and the gunsmith fit barrel?
@floridaplumber75124 жыл бұрын
Would Apex Barrels help Gen 5 glocks? I would hope Manufacturers would fix this problem
@MrBadger4 жыл бұрын
Thanks for the video. The hood width on my Apex barrel fit out of the box. I did have to adjust the hood length to fit. I did not, however, have to remove any material from the fitting pad on the bottom. Is this indicative of a tolerance issue in the frame itself?
@apextactical4 жыл бұрын
We've seen them all over the place. Some guns require a lot of fitting while others do not.
@MrBadger4 жыл бұрын
@@apextactical Thank you.
@scrunge40054 жыл бұрын
Your website says that barrel fitting may not be required on all slides. Do you have a ballpark percentage of how often a hand fit is required?
@apextactical4 жыл бұрын
No, but you still will most likely have to fit the barrel to the frame.
@mattmccams8 ай бұрын
Does the feed ramp need to be tuned, almost done fitting to my slide/frame and noice the massive difference between the apex/M&P as is feed ramp
@apextactical8 ай бұрын
Nope it will work as is.
@mattmccams8 ай бұрын
@@apextactical thank you for the quick reply.
@sunvalleyorganics8 ай бұрын
Can I ask what's the difference between the semi drop in barrel vs the gunsmith barrel ? Both require fitting so I'm just curious in the difference..
@apextactical8 ай бұрын
As of now, just the amount of material needing removed from the end of the hood and the bottom fitting pad.
@sunvalleyorganics8 ай бұрын
@@apextactical awesome thank you
@PAIsIllegal Жыл бұрын
Can modify a g35 bbl by filing the lug to fit?
@enb38103 жыл бұрын
Good lord what did you guys do to that sharpie?
@qodeshymchurchwell18512 жыл бұрын
Thank you
@frankthespank4 жыл бұрын
What kind of file do I need?! I’m going crazy looking for this file, no file has EVERYTHING he says it needs, a Equaling file that’s Parallel with Safe Edges, no files has those three things damnit!!
@apextactical4 жыл бұрын
We have them on our website.
@frankthespank4 жыл бұрын
apextactical - Thanks, I finally found and ordered it, I didn’t think you guys made files.... I ordered your file and jig at Brownells, thanks! 😎 P.S Got the Sharpie somewhere else... LOL
@apextactical4 жыл бұрын
@@frankthespank We do not make files but we stock them because we knew people would run into problems finding the right style of file.
@frankthespank4 жыл бұрын
apextactical - Good call on that, lol! At Brownells they are listed as made by “Apex Tool” so I figured you made them. I’m just glad I have the right file coming to fit my new barrel now!
@frankthespank4 жыл бұрын
I got my order from Brownells, along with a 1911 fitting jig!!! 😡 So that’s on the way back to Brownells, but the file, should it only be a quarter of an inch wide? It’s very small... do I have the right file? Says it’s “40076N” “Cut 0” “6”/152MM” “20/08” also says “Pillar” and “Narrow”.
@nvkulk Жыл бұрын
Take your time and don’t be intimidated or impatient! It’s well worth it…my only Criticism is… When is apex going to manufacture their own pistol !👍
@atlchopper20084 жыл бұрын
Would this process help fit a glock 17 barrel into a SD9ve?
@apextactical4 жыл бұрын
No.
@enb38103 жыл бұрын
Aside from them saying no, that sounds like a terrible idea.
@atlchopper20083 жыл бұрын
Not that terrible since they are such a close fit already. A glock 17 barrels fits in and is only a mm or so away from being fully operational. I ask this because a glock 17 barrel is less than half the price of a threaded barrel for a SD9ve which are hard to find as well. I like the extended barrel look.
@apextactical3 жыл бұрын
@@atlchopper2008 Well, after asking the two resident experts, and owners of the company, they reiterated that 'no, it won't work.' But, being that they are the two most knowledgeable experts on the SDVE, outside of S&W itself, you can certainly choose to ignore their input.
@atlchopper20083 жыл бұрын
Just doing some friendly research guys so you can ease up
@blackriflex392 жыл бұрын
Is this compatible info to a glock? I have a p80 and I have a “ drop in barrel” and it’s got 15 thousands of movement.. you said 2 is acceptable. It’s marring up my barrel something terrible after trying multiple barrels with the same result I’ve decided the slides the issue. I’m wanting to custom fit a barrel to the slide. Can this jig be used for glock pattern barrels and do you guys offer a barrel like I’m looking for.
@apextactical2 жыл бұрын
We do not offer a Glock barrel. This jig is specifically for use with our M&P Barrels. The movement reference is based on our design and is not applicable to the Glock platform, where dimensions and tolerances may be different.
@duradance44752 жыл бұрын
I feel like there’s way too much material on the frame parts of the barrels they can literally be machined before hand fit that’s how much material needs to be removed
@apextactical2 жыл бұрын
It will vary from gun to gun due to the wide variances in the tolerances of the the M&P models. We've seen more than a couple M&P pistols over the years and we're well versed on how wide the tolerance range is on these guns.
@mattblank77282 жыл бұрын
Would it have been too much to finish the actual barrel( with all that expensive equipment behind you)?... I should have ordered a stock replacement barrel. Thanks Santa.... (FML).
@hybridcheef1103 жыл бұрын
I don't understand why they don't just make it work drop in if it's made for this gun it kind of makes no sense to me
@apextactical3 жыл бұрын
You have to understand the accuracy issue with the M&P models. It is due to tolerance variations. In order to achieve the kind of accuracy the Apex Grade Barrel delivers the barrel has to be fitted to both the slide and the frame. We did a whole video on this issue when we introduced these barrels.
@G3LAPS3 жыл бұрын
Why don't apex just make the barrel correct.
@apextactical3 жыл бұрын
We do, that's why it is so accurate. To achieve true accuracy, the kind that can deliver sub-one inch groups at 25 yards, you have to fit the barrel to both the slide and the frame in the M&P. Check out this video for the background on why our Apex Grade Barrels are fitted. kzbin.info/www/bejne/qXzdaoSXp7CUbpI
@delkor0073 жыл бұрын
This looks like pain in the ass to do and gun smith will at least make me pay $150 easy with this adjustment
@apextactical3 жыл бұрын
It is much easier than you think.
@delkor0073 жыл бұрын
@@apextactical cant you just 3D print it so adjustments are not needed ?
@apextactical3 жыл бұрын
@@delkor007 No, not even close. That is literally not how this works. The barrel has to be fitted to both the slide and the frame of the gun it is being installed to. And each M&P is different in its tolerances from other M&Ps.
@ruthlessray2 Жыл бұрын
This is why we just get a Glock, where it will just go bang every time .