apple watch series 3 lcd flex connector replacement

This video we want to show u how to replacement lcd flex connector
iwatch series 3, Okay Let's watching

[@vid8306]

Hi, can you please list the materials that you used to remove the LCD flex connector and reapply the flex cable connector

[@story.timeee]

Transparent stuff is flux

[@constantinsamorasla7996]

can you please list the materials that you used to remove the LCD flex connector?

[@jureglibic3039]

Hi,I have an Apple 3 series watch and right side of the touch screen does not respond.LCD is working and has no Dead pixels.Any toughts?

[@sikeymoto4068]

can you please tell me what materials you used?

[@freesko1]

Hello man, can you repaire my watch the flex is cut, where are you located, it is watch 3 how much doest it cost

[@hectoroira4565]

hi bro, do you have store? or online shop store? i don't know the problem of apple Series 3, i change already the following: LCD assembly & New Battery, but until now is not Working? do you have any Suggestion! Thank you so much.

[@petebmx]

What is the liquid he is using when cleaning the terminals?

[@MaximussTV]

What are you applying? In 03:50 Also, what is its efficacy?

[@kritpalsingh1132]

Hey My watch is not pairing after replacing the display in Apple watch series 3 Plz help

[@christopherramos4800]

Can you please show how to fold the flex cable and attach the the metal plate to the power button, my cable was cut and the video doesn't show how you did it on the new cable.

[@iJoselo]

Can be this repair a Solution for no image on LCD ?

[@anushjhade8363]

Hi, where are u located? If india reply plz .. Thanks.

[@andrewlandry3503]

Hello, what are all the materials used in this video?

[@porshiabryant9594]

Also, what was in the blue bottle at 5:08?

[@erich387]

Hi, How do you place the new flex connector precisely on the watch so that every "gold dots" connect properly? Thanks

[@noahscott7272]

Very carefully. 😂 the truth is that if you have the contacts tinned properly without too much or too little solder, once it gets hot enough to flow, surface tension will pull it into place as long as it’s close. Better towards too little solder than too much

[@RVU877]

Sir can you help me my Apple Watch series 4 lcd connecter flex print plucked on board

[@gabrigames02]

Bro help, i successfuly repair the flex but now when I turn on i have apple logo boot loop??? Fix?

[@bikerdon2531]

I had my apple watch s3 repaired due to water damage to an accredited apple shop. The technician did this and replace the flex ribbon. It took him 2 hours to finaly fix it. It cost me USD 100.

[@Millagrosa]

Which flex connector is from the screen?

[@nadhaswaramnew8450]

Were we get this ribbon

[@cristao4994]

Eu não estou conseguindo abrir o encaixe do conector alguma dica??

[@porshiabryant9594]

Does anyone know what he was applying at 3:50? Also, what was the stuff is put on the new cable before soldering it on?

[@shadilleu-leu3824]

Flux for welding

[@np4174]

What is your soldering iron temperature i think 320 Something?

[@Clavinohou]

N P he said 400

[@saschakarsten9102]

Hi, on 2:18 you remove that tiny sticker on the back of the flex. On my series 3 this covers all 3 lines of the flex. While chaning the LCD this sticker crushed in position of the screw. After putting in the new LCD my screen still stay black, I sent back the display, got a new one but still the same .. maybe cause of this sticker ? Or any other ideas ? Thanks !!

[@chrizkro]

Have you found a solution for your problem? My sticker crushed in the same position, the screen works but my force touch doesn‘t work anymore (with old and new sensor)

[@ThePoloo45]

hi, what is the metal you are soldering ?? thanks

[@Clavinohou]

RecBack solder

[@fredydominguez7486]

How did you know it was lined up correctly when soldering the new one on?

[@noahscott7272]

He set the sides in place first. There is also a hole in the flex cable that I’m certain is key. As long as you have the contacts properly tinned and it’s lined up close enough, the heat will cause the solder to flow and actually pull it into place. If you can get the first three or four attach this way, than they should all end up lining up.

[@noahscott7272]

You’d be surprised how long I did this creating more work for myself trying to get things perfect and hold them in place before realizing that the surface tension of the solder will actually do the work for you. Holding it still ends up actually being counter productive a lot of times. This is especially true with hot air

[@alimohammedhaider6611]

Can you please do Apple Watch 4 LCD Flex? Thanks

[@cambofixing]

yes we can

[@thegreenmememan827]

hey, can you please send me the link for the flex connectors? thanks!

[@prasanbtw3834]

Go to google and search Apple Watch? series flex cable

[@Aris19771234]

Mistrz!! 👏👏👏👏

[@Moro8903]

Kolego. Nie mistrz, a rzeźnik. Takie rzeczy się robi odpowiednim grotem i pod mikroskopem.

[@Aris19771234]

Wiem wiem, sam ostatnio wymieniałem taśmę w 3ójce i właśnie pod mikroskopem, dlatego podziwiam kolesia za wzrok i łatwość w jaki sposób on to zrobił hehe Oglądam tych „rzeźników” Hindusów i mam czasem lekki uśmiech na pysku, patrząc jak oni to naprawiają 😁 Najlepiej jak robią projektory 😅 Dosłownie, jakby skuter pod domem se robił 💪 I najciekawsze to, że naprawiają i to działa 🫣😜 Ja jak robiłem iwatcha (jestem amatorem) to musiałem mieć zestaw chusteczek, żeby pot z czoła wycierać 😅 pozdo

[@alimohammedhaider6611]

What was the soldering temperature? Thanks

[@cambofixing]

400 degree

[@lexrossini9557]

@@cambofixing celsius ?

[@MasakyoRenSai]

It’s essentially a, ‘Don’t try this at home’ video! Guys, go to your local repair shop and let the experts handle it. 😆

[@torresmartinezbrayamjeovan6015]

It works for mic issue? Excellent video

[@cambofixing]

💙

[@aestheticstatus864]

Lcd kaha pe mila

[@Carlos31741]

Id song?

[@BalaKrishna-mh8gf]

U tell glass repacent

[@nataliakofman9646]

l 2

[@shaqib888ansari9]

Meri apple watch mein iCloud fas gaya hai please remove iCloud series 3

[@billymania11]

Man o' man, I think it's better to send it into Apple for repair. Too much can go wrong.

[@detounchin]

Apple does not repair, apple replace