How To: Bosch/Thermador/Gaggenau Water Inlet Valve 00425458

[@johnm7056]

Your videos are the best since you mention all the little details. All the "other" videos on KZbin are just guys reading from a generic corporate script. I LOVE YOU, MAN!

[@appliancepartspros]

Thanks! We're so glad to hear that our videos help you out.

[@1966Lazaros]

Awesome instructions. Part cost around $40. It took me about an hour to replace it; trickiest steps were getting the hose off the back of the valve, and the elbow joint at front took a lot of effort to unscrew. Also, the purple wire was white. In the end, probably saved myself over $1 000, which is the price of a new machine and installation.

[@appliancepartspros]

So glad you were able to repair your unit! Let us know if you have any questions!

[@seesea-sv3xw]

Thank you, this looks to be the only thing easy to replace on a Bosche DW, in my experience as soon as you mention Bosch to a repairman they hang up the phone or say "we don't service Bosch"

[@laurajudson]

Not true in our area. Plenty of Bosch repair in the coastal SC areas.

[@eelslake11]

Just replaced the inlet valve because the machine was slowly filling when off. With my model, I guess the design was "improved" so that you cannot pull the valve forward when detached... won't come through the bracket and wire and drain harnesses too tight. It was a bit more work as a result, but the video was priceless in terms of help.

[@appliancepartspros]

Glad we could help!

[@momanddad5524]

Thanks for a great tutorial ! Everything looked and worked exactly as pictured in your video. A very easy repair !

[@appliancepartspros]

mom and dad Glad the video helped you get the water valve changed!

[@Psilobite]

3:50 what kind of fitting is that?

[@AnthocyaninGenetix]

Hey I have a question if u check these comments! Where does the other side of the green ground wire go! Does it just hang out in there or does it connect to something! Thank you

[@appliancepartspros]

It appears that those two green wires should be connect together and slide on the one terminal.

[@Joe-ip2ky]

Very well done ! Thanks so much !

[@Mickster2233]

Fixed! Thank you!

[@laurajudson]

Is this the part for a 2001 Bosch 3032UC? I am not very good with repairs but I am going to try this since there are no Bosch dishwashers available for purchase for 8 to 12 months!

[@sparkynm156]

Are they still out of dishwashers ?

[@laurajudson]

@@sparkynm156 no. Both my friend and I have purchased Bosch Dishwashers locally in the last few months.

[@Samlol23_drrich]

Help!, buzzing (sounds like a typical solenoid buzz), dishes not cleaned, error code e1. Found e1 to be water not heating, but coupled with buzz, and no clean, I was thinking not filling enough, so heater won’t start, thus the e1 code. Ever heard of anything like that? You just walked me thru a circulator pump replacement, so maybe I damaged the fill valve when I had to recommend the water line. Thanks for any help

[@appliancepartspros]

We'd be happy to help you out with that! We offer free technical advice and diagnosis 7 days a week. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx

[@jfang560]

Very helpful!😊

[@appliancepartspros]

Thank you!

[@AnthocyaninGenetix]

Those two green ground wires, where do they lead?

[@1966Lazaros]

My question exactly.

[@1966Lazaros]

A-ha. Found the answer in a reply below.

[@georgekane3497]

great!

[@davejenkins7735]

Thanks all went well

[@appliancepartspros]

Glad the video helped you get the dishwasher fixed!

[@darrendeane5186]

The valve is not leaking the pipe that is connected at that point. You mean i have to replace the entire valve.