How To: Whirlpool/KitchenAid/Maytag Snubber Ring WP21002026

[@joequillun7790]

An oldie, but a goodie. Thanks for the video. 👌

[@appliancepartspros]

You're welcome!

[@southmark]

Excellent repair video!

[@SlingbladeJim]

how and when did you put the drive belt back on....................

[@jamesdemain1959]

Awesome! Thank you. I followed the directions and fixed my washer all by myself. Everything worked out perfectly. No more shake rattle and roll. And no need for a new machine.

[@appliancepartspros]

James DeMain Good job on getting the washer up and running!

[@stilllearning6035]

Very very good video....covered everything....but most importantly....crystal clear camera work and nice closeups

[@tedthornton7791]

Could I get the part number for the belt please?

[@guacamolekid8883]

You guys rock! Thank you for your amazing crystal clear demonstration that covers the whole process leaving nothing to chance. Peace

[@SlingbladeJim]

Do you have a video on why THIS EXACT WASHER won't spin the clothes dry? I have done everything in this one.....thank you. Oh..by the way...putting those springs back on was very difficult even with the special tool...

[@jasminenarinkiz9229]

I change my snuber short cut from under the washer by removing belt, clip,break drum is this way wrong?

[@luketownsend9326]

Super Helpful Video, Thanks!

[@stephaniej2823]

Excellent and helpful video. I had to look up how to take off the hoses (prior to repair). Also, spring removal in the video looked much simpler than it actually is. Took me four hours to repair; I am very much a novice. Well worth the time and the $6 part.

[@appliancepartspros]

Awesome, glad the video helped you out!

[@rchandos]

I also had a tough time removing and replacing the springs, especially the two in the back, but discovered that tipping the tank toward the spring you're working on makes for a shorter stretch. You can tip the tank by wedging a cushion between the tank and the cabinet.

[@RogerEcks]

Thank you so much for this video, I was able to order the parts and repair my washer. It works like new once again.

[@shaunedwards4893]

Those six Springs are easy with the back door on that one. My Maytag didn't have a back door. Was trying to do this job on a tiny washroom. That last spring in the back left corner is a nightmare had to change everything

[@joerubio3391]

Can't you lift the drum out wo remove motor?

[@buddyboy4x44]

Two comments, having done the job with no complications. 1. A lot is made of removing and replacing the big tub springs. There is a very safe and simple solution. I used a long prybar with a flat end. Insert it into the coil spring just below the top coils. A thin screwdriver inserted first opens the gap enough to get it in. Push it all the way in until well clamped and seated. Then use an appropriate length of 2 x 6 as a stable fulcrum. I used one about 4" long. Lever the spring up and off the upper hook. Replacement is the reverse. Very little effort is involved. 2. Getting the old snubber ring out and replaced was easier than expected. Loosening the six clamping bolts almost to their limit provided more than enough space. You can place your finger behind each one as you loosen it to feel that there is enough screw left in the thread to keep it safe. I found it easier to remove the pressure washer and plate at the base to access the 6 bolts. My old snubber ring seemed as good as the new. However, a thorough cleaning of the surfaces it was seated in, no lubrication, and replacement with the new ring completely cured my tub instability during spin cycle.

[@appliancepartspros]

Thanks for those tips!

[@buddyboy4x44]

Yours was the most helpful video of the many on the web to replace the snubber ring.

[@appliancepartspros]

We appreciate that feedback! Glad we could help!

[@marksalter9622]

buddyboy4x44 Show me how to replace the belt on a Maytag washer

[@cxphoya]

Great video. Got it done. A couple tips: (1) Rather than removing the motor, we just lifted the agitator straight out the top. (2) To make it easier to reattach the springs, we took them out and stuck a handful of nickels in each. Probably 8 would have meant no stretching at all -- but 5 made it so my 12-year-old son could reattach the springs. Then I had him pull out the coins and keep the change.Only weird thing: The knob for turning the washing machine on somehow got off kilter. It's about 180 degrees off -- so "regular wash" is now "delicate rinse." Probably a simple fix I'll have to look up and deal with later.

[@appliancepartspros]

Glad we could help. Thanks for the tips!

[@m0rrisgreenberg]

good stuff, that Nickle/spring technique is brilliant!

[@simtrafox]

Thank you for the nickel hint.

[@jeanious2009]

Got a top loader Maytag washer that shakes like crazy and walks off pulling the hoses and what not, lol. Am going to give this a shot and replace the snubber ring along with the springs to be on the safe side.

[@appliancepartspros]

jeanious2009 Hope the video helps you helps you get the washer fixed!

[@bigradz8246]

I have a Admiral-Maytag, top loader, washer (mod# LNC6766A00). The problem with this unit is that it shake's violently and walks a few feet. I already replaced the snubber ring, tub springs, and even the washer thrust bearing with pulley. The washer still shakes and walks from original position. My question is what else could be the issue with this machine, please help.

[@appliancepartspros]

We'd be happy to help you out with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/.

[@chris-oq9dg]

Great tip on placing 3 5/16 temporary bolts. What length should they be?

[@appliancepartspros]

+chris 4 They need to be a little longer than the original screws. Like an inch or 1- 1/4 inch should work ok.

[@juansanchez-kb4ij]

This part will fix the squeak noise when the machine suddenly stop at spin cycle or when u open the lid ?

[@appliancepartspros]

We offer free technical advice and diagnosis, so we would be happy to help make sure that this is the part you need to replace. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to look up your unit's schematics and give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx

[@paulblecharczyk7132]

No it will not halt the sqeaking brake.

[@MrJFunkSanchez]

When should the brake rotor and stator be replaced?

[@appliancepartspros]

+MrJFunk Sanchez If the brake is making a lot of noise when stopping the tub. Or if the brakes are totally worn and the tub does not stop right away after the spin cycle.

[@MrJFunkSanchez]

+AppliancePartsPros Great, thanks for the great video and instructions. Will need to work on my Maytag once I get the parts.

[@alejandro.flores3340]

where can I get the snubber ring

[@appliancepartspros]

+ALEJANDRO. FLORES You can go to our website and enter your appliance model number to view the parts breakdowns to be sure you get the correct part for your model.

[@Wasmachineman]

I'm from Europe, what does a snubber ring do? We don't have vertical axis top loaders here.

[@appliancepartspros]

WittgensteinSergeant™ The snubber ring is a slick plastic ring the allows the inner washer assembly to move around during the wash cycles.

[@Wasmachineman]

AppliancePartsPros Makes sense, thanks.

[@Cyborg17.211]

The 200lbs of pressure used by the brake assembly sounds scary.

[@oscargonzalezaquino3676]

Cual es la falla de mi lavadora sólo gira en sentido antihorario saludos

[@appliancepartspros]

Ofrecemos asesoramiento técnico y diagnóstico gratuitos. Puede llamarnos al 1-877-477-7278 o puede chatear con nosotros en nuestro sitio web: www.appliancepartspros.com/. Necesitaremos su número de modelo para brindarle consejos precisos. Puede ubicar el número de modelo con esta herramienta en nuestro sitio web: www.appliancepartspros.com/modelnumber_locator.aspx

[@timboambo1]

Tomorrow will be the second time I have replaced the snubber ring on my washing machine. You just can't kill a Maytag! After many years of use it begins to get fussy and insists on the load being rebalanced or it will walk out on me - literally! So a new snubber ring fixes it. Thanks for the revision on how to do the job.

[@appliancepartspros]

Glad the video helped!

[@manuelcamargo2682]

Hi John. what is the size of the screws ? the longer ones ?

[@appliancepartspros]

Which screws do you mean, Manuel? What's the timestamp in the video where you're asking about?