How To: Samsung Motor Inverter Board DC92-01531B

[@jay21tech]

You guys are awesome! Helped me fix my washer and refrigerator from another video from your channel. Thanks

[@appliancepartspros]

Glad we were able to assist you! If we can help you with anything in the future please let us know.

[@mirnanunez1605]

@@appliancepartspros you guys helped me fix my washer too, thank you !!

[@bobwalsh6963]

Great Video. Changing this part fixed my 3C2 error code which caused my washer to not agitate or spin. Thank you!

[@ogcastro310831]

This part fixed my 3e and 3e2 errors on my samsung washer wf42h5000aw/a2. It wouldnt spin. Thanks saved us a ton!

[@adrianbarraza5929]

Thank you. Ordered my inverter from your store. Problem solved.

[@appliancepartspros]

You are very welcome. If there is anything we can help you with in the future please let us know.

[@andrebrooks7040]

Did your washer spin for 10 seconds one way stop for about 15 and then spin for another 10 seconds in a loop?

[@adrianbarraza5929]

@@andrebrooks7040 not exactly. It would start to spin but then stop shortly after. From there it didn’t do anything. Water was in the drum so I had to drain it out. Eventually replaced the inverter and it works again like normal.

[@lottzd1]

Thanks for the video!!!! Worked perfect!

[@appliancepartspros]

Glad you were able to fix your issue! If there is anything we can help you with in the future please let us know.

[@marzgtp]

What causes the inverter board to burn out?

[@Kim-qz7nz]

No my problem still exists after changing all the boards. I bought the mems sensor which is my last option to get this machine working again. If it isn't fixed after that then is money down the drain for this washer. Will keep u posted when I receive and install the part.

[@RandomBitzzz]

Great video! what problems does this fix?

[@mirnanunez1605]

Great information

[@appliancepartspros]

Thank you!

[@atilesmo]

What code led to replacing this board?

[@Kim-qz7nz]

Does this fix the problem with the washer not spinning or completing a cycle?

[@marcoskssiani]

Hey, could you fix this problem? I have the same and I´m in doubt about changing the PCB-Inverter or the PCB-Main.

[@dongs1221]

I have a same problem. Rinse->spin->Rinse-> keep again.... Did you fix it?

[@EstyloTv]

@@marcoskssiani i have the same issue.. did you figure out what it was?

[@sammael5738]

I am having the exact same issue. Did this help it?

[@VivaLaTony06]

Curious about this too. 3c error, intermittent draining issues, and constant stopping during cycles that turns quick wash into not quick at all. I've seen reviews on Amazon for this part that claim this part fixes that. Just looking for confirmation.

[@BriBo456]

@appliancprtspros I think this might be the problem I'm having, but I'm still not 100% sure. Is there a way to test the inverter board before I spend the money on the part? I'm not getting an error code on my FlexWash, but the stator and rotor appear to stutter when trying to spin. The unit is capable of a full rotation, but only when sensing a load, not under the stress of a spin. I've troubleshot a bunch of other parts including the vibration sensor, pressure switch, door lock, etc. Any insight would be appreciated. Thanks.

[@appliancepartspros]

What is the model number of your appliance?

[@Eltravieso71198]

after replacing board, any other steps before using washer? Thanks!

[@appliancepartspros]

No, once you replace the part you can start using the unit.

[@chucktownfinest]

Is the Inverter PCB the same as what is fixed on this video? I have an error code AC6. Will replacing the board fix the problem?

[@martinkunz9768]

help !! what solvent do you use? alcohol isn´t it.

[@appliancepartspros]

There is no solvent used in this video. What are you trying to do?

[@aawwnnddeenn2183]

Salam, can you fix the washing machine card?

[@andrebrooks7040]

Can you please help me? I have a washer WF50K7500AW/A2-00 and it doesn’t spin fully. It spins for about 10 seconds one way, stops for 15 seconds and then spins the other way for 10 seconds in a loop. I’ve only ever got it to pull a U6 code and a Cr??

[@appliancepartspros]

With the U6 code it is saying that the machine is unbalanced. Have you tried to just unplug your washer for a few minutes and then plug it back in to see if the board would reset itself?

[@andrebrooks7040]

@@appliancepartspros yes. I’ve had it unplugged for a little bit. I ran the diagnostic again and only displayed 0001 The washer never runs a complete cycle. Constantly spinning for 10 seconds medium speed, stopping for 15 seconds, switching directions and spinning medium speed for 10 seconds back and forth. Never reach’s a full spin, or wash pattern.

[@appliancepartspros]

Have you recently had any power outages?

[@JAROSLAVKARAS-o3k]

how about repairing the card, you learned on the card's udder, you repair the memory of the module

[@appliancepartspros]

The manufacturer recommends replacing the board if it has failed.

[@VernGraner]

This video stepped me through replacing the inverter board on my WV55M9600AV/A5 washer! 👍🙂Thanks for the clear walk through- if only I had the same amount of free space around the unit! Quite a bit more difficult when you're trying to squeeze between the wall and the back of the unit! ¯\_(ツ)_/¯

[@thaison773]

Hi I'm looking for the inverter board with the same washer as you are. Would you please tell me the part number of the inverter board that you bought and where did you buy it from?

[@VernGraner]

@@thaison773 I've tried like 4 times to reply but youtube is deleting my responses. :(

[@VernGraner]

@@thaison773 Samsung Washer Control Board DC92-01531C

[@thaison773]

@Vern Graner hello I appreciate your response I actually found that same board that you mentioned and finished installing it today, washer works now. Thank you

[@fatb29]

Awesome information! Using this video, I skipped the poorly trained appliance repair tech numbskulls and did the repairs myself. I changed the stator, inverter board and main control panel/dial selector boards. I received all the parts for free under an extended warranty I bought 4 years ago when I bought the Samsung washer. But the extended warranty techs keep sending the wrong parts and then they can't install them until weeks after the parts arrive. I installed the unneeded main control and selector panels, and they didn't fix the problem despite the extended warranty tech telling me that was the issue. I just got this inverter board and a new stator installed and the machine finally runs great! The nitwits also sent me the wrong power board but thankfully, I didn't need it. No more sitting around 8am-5pm 2-3 days in a row being held hostage by useless service tech yahoos who show up (or don't show up) when the feel like it. I subscribed to your channel and liked this video - Thanks!

[@jefftrex]

ok boomer

[@JonasGrumby]

Stay far away from Samsung Appliances.

[@bryanjones4985]

All modern day appliances are built to be thrown away anymore

[@Beefeater911]

So true!@@bryanjones4985

[@Eltravieso71198]

after replacing board, any other steps before using washer? Thanks!

[@appliancepartspros]

No, once you replace the part you can start using the unit.

[@Eltravieso71198]

after replacing board, any other steps before using washer? Thanks!

[@appliancepartspros]

No, once you replace the part you can start using the unit.

[@Eltravieso71198]

@@appliancepartspros Thank you!

[@appliancepartspros]

You're welcome!