Maytag Washer Repair - Leaking Water - Hose Clamp

[@stevenyounger8550]

Spence that's good to know ! Thanks video & your tip may solve problem with my machine

[@CB-qy2zl]

On mine the tub has a clamp that goes all around the tub right where the white portion meets the rest of the tub in your video. It was leaking from there when I did a large load and especially during the spin cycle. I tightened the clamp with a flat head screwdriver and no more leak!

[@boblafountaine9560]

Thanks for taking the time to explain. Getting the panel off is tricky unless it’s demonstrated properly. Excellent video.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@jimronchetto8592]

I freaked out when my Maytag started POURING water out the bottom at then end of the wash cycle. Watched this video which REALLY helped me get the front off my washer and found the the bleach hose had just come off the bleach pocket! That's all that was wrong. I put a drop of super glue on it to keep it on the pocket and now it works perfectly again! Thanks so so much!!!!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@Xavierstrainsandmotors]

When you reattach the hose can you show how to pull down the outer drive drum?

[@humandr2873]

what a simple, and professional way of explaining. god bless this man.

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page.

[@aliasfred]

I have a Maytag A-606 with a 1953 build date, also have the Maytag matching electric dryer, same vintage. Thanks, mine is leaking from the same hose, my clamps are still there but, apparently have lost their tension. After 61 years I guess they would.

[@Appliancevideo]

Larry Great picture. Thank you for your positive comment. Please help our ranking by subscribing to our KZbin page or posting our ApplianceVideo.com site on your Facebook or Twitter account. This will help us to continue to make new professional videos from our factory trained technicians. We also have our authorized technician’s daily emailing professional advice daily to people like you that have appliance problems. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.

[@philipperiopel1911]

Keep them! I have a 4 years old Whirlpool Cabrio and it's already leaking.Junk, junk, junk!!!

[@mablebird]

61!? My family has had our Maytag for 27 years. Started leaking so we're gonna try to repair it. Maybe we'll make it half as long xD

[@johnnyv5995]

These Maytags are workhorses! 27 years and still going strong, only had to replace belts.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@relentless3735]

Thank you for your video 👍🏼 Now we have to wait two weeks for repair.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@spencehogg2410]

Just thought I'd add that it's good to check the end of the rubber line for wear. If there's enough slack in the tube, you can cut off the worn/cracking rubber and work with new tube. 😁

[@elpaisa7735]

Great video amigo. Big help!

[@franklucchese3839]

Good stuff I have a Maytag - it leaks a bit (getting worse) when the wash cycle ends - it looks like it coming from the center and shot outs Also the spin cycle does not get clothes as dry as it once did. Thanks again

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@arthurwhiteowl8293]

Great help...do the simple things first. Simple and very methodical. It just takes time and a little gumption.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@johngregreid1]

What a great service you offer. I bought two new clamps this AM and everything is now dry. Cost $3.00. I used Loctite to try to stop the threads from unraveling from the vibration. The unit is 30 years old and this is the first service. When it finally dies, what brand and type do you recommend? Thank you very much.

[@Appliancevideo]

+JOHN REID Thanks for your positive comment. We have helped millions of people repair their own appliances. Please help us produce more videos to our site by subscribing to our KZbin page, or posting our website www.appliancevideo.com/ on your Facebook or Twitter account.

[@ronaldreyes6805]

awesome video!!!

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@47akss]

My washer stop mid cycle n didn’t drain water and the lid lock sign popped up, when I checked the drain pump n put it back n start a tried a cycle it was licking for the drain pump. What should I do?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@speedfreak8200]

Thank you sir I didn't no how to get panel off till you showed me (mine had no screws just used screw driver to pop the front loose.Low & behold just the fill hose split from age,I can't thank you enough.... five stars

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@ninawade3055]

Thank you, nice information video

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@anneywilliams8592]

I have a Maytag Washer with a Serial No. 13421123 QK and a Model No. LAT5005AAE that is leaking water and a lot of it. Would it be the hoses like you explained or the bearings and seals?

[@Appliancevideo]

Hello Anne, Yes that is a possibility. Check your hoses and see if any water stains are around them. Also, look at the pump around the shaft seal for water leakage. Thank you for watching :) ApplianceVideo.com is a family-owned and operated company providing you FREE, high-quality repair videos. To make new videos and answer your questions, please purchase the parts you need from us at 1-800-830-5465, or order parts online at ApplianceVideo.com. Thank you for your continued support and good luck on your project.

[@1caniac327]

my Maytag has a full "three sided" front cover

[@krmntuxedo]

Awesome!! video, is lot of help!!! yea.mi washer is; whilrpool commercial quality 5 speeds super cap. plus (pump trouble- do not drain?)

[@Appliancevideo]

krmna Bars Thanks for the positive comment. Hopefully we saved you some money. Please help us provide more videos to our site by posting ApplianceVideo.com on your KZbin, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.

[@nicholasbuchanan7790]

Yes! Thanks so much for sharing...great video and super helpful :D Appreciate it!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@5thid738]

Troy, I have that same model washer as in this video. I need to replace the water inlet spout. How do you remove the top cover to access the spout?

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@kathypendzick-sapp8439]

My Maytag Preforma washer Model PAV2300AWW is leaking out of the pulley under the pump. Small leak. Would this be a belt issue or is the the pump likely bad?

[@Appliancevideo]

Kathy, it is the pump. Not the belt. We have helped thousands of people repair theirown appliances. Please help produce more quality videos so we can post them to our website and help more people like you save money and time. Subscribe to our KZbin page, or post our website www.appliancevideo.com/ on your Facebook or Twitter account. Have a great day.

[@johnungar]

ApplianceVideo.com

[@consuelosanchez4194]

My washer is leaking from the top when filling. We are trting to find out how to open the top to check the hose from the top

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@garyjohnson6194]

My washer 110.21392010 is leaking from the bottom and I'm not sure if its a drain pump issue or bad hose/ hose clamps. Pls help.

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 3,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@speedfreak8200]

take off the front & look like he is showing us sheesh.My fill hose failed an easy fix

[@brittanyk4326]

I need help with my maytag washer! It was leaking water so we replaced the water inlet valve. There is a small white box on the top of the washer next to the tub that has black tubing go to each side of it. Whenever the water runs, it spits water out there. I am trying to figure out the name of this part so I can get what I need to fix it. Please help me with this! I was hoping this video would maybe show it and he might say what it was. lol Thanks

[@Appliancevideo]

Great question, with our technicians now getting hundreds questions weekly, they are answering all questions at our website at ApplianceVideo.com under our Repair Help section. We have over 3,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes.

[@brittanyk4326]

Thanks for your help. I ended up figuring it out and actually fixing it yesterday well with the help of the local parts store :)

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please subscribe to our KZbin channel or donate a dollar to our fan funding page to help us create more quality content. This is the only way we can continue to help thousands of people like you every month. Just click on the link below and go to our KZbin page and click on the BLUE support button on the right hand side of the page. Thanks in advance. kzbin.info

[@buzz1002lightyear]

@@brittanyk4326 Could you share the name of that part so that the rest of us can benefit from your repair? Thank you.

[@Linda9437]

Hi.. i am have a problem with my maytag washer model no. SAV5710AWW ... It is pouring water over the side of the tank on one side while washing..

[@Appliancevideo]

Great question, with our technicians now getting hundreds questions weekly, they are answering all questions at our website at ApplianceVideo.com under our Repair Help section. We have over 3,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes.

[@Linda9437]

Thank you

[@Mohammed-iu6ug]

thanks

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@ryk1265]

Nice!

[@Appliancevideo]

Thanks

[@michaelwilson5113]

could you use a crimping tool?

[@Appliancevideo]

+Michael Wilson All of our technicians are now answering questions daily at our www.appliancevideo.com/ website under the Repair Help section. We also have over 1600 common questions and answers that you can easily search through by your model number, appliance make, problem or error code and it’s absolutely FREE. You also have the option to email a factory service technician with a question on your appliance at www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, you can also search our library of over 2600 free repair videos. ApplianceVideo.com specializes in quality DO-IT-YOURSELF appliance repair videos and we get over 800,000 views per MONTH to our videos worldwide and growing. If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks for your support. Matt Ace Appliance factory service technician.

[@Ravenbones]

With the time it took to copy and paste that answer, you could have answered it.

[@terrywirgau6111]

My Maytag is letting water drip into the tub even after machine is off. Leaking valve. Any suggestions?

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@benortiz7123]

Any fixes for this? I have same issue

[@jayspencer4346]

Awesome! Have you seen the new Cabrio, Oasis, Bravos inner tub removal tool JTP2014B?? It's awesome!

[@Appliancevideo]

Jay Spencer No, I have not seen the new Cabrio, Oasis, Bravos inner tub removal tool JTP2014B. Thanks for your positive comment. Please help us provide more videos to our site by subscribing to our KZbin page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.

[@Appliancevideo]

yes

[@mitsukamaki9596]

thats a clean washer. mine was dusty and nasty....

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@bruhbruh1848]

that is that silver metal think under the tub that's where my washer is leaking from

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@angelatokwok]

ApplianceVideo.com I'm