Applying Epoxy Resin to a Glittered Tumbler

This is a tutorial on applying epoxy resin to a glittered tumbler.
Tumbler used: Hogg 32oz
Glitter used: Leagally Pink from YaYa's Glitter and Neon Orange from Recollections
Epoxy Used: Alumilite Amazing Clear Cast
Other supplies: nitrile gloves, electrical tape, baby wipes, disposable plastic cup, silicone spatula
*** Please use caution when using epoxy. Read all materials and do your research on protecting yourself.

[@jennaconroy9450]

Your tutorials are AMAZING! The reason I haven't started selling my tumblers is because I want them to be PERFECT and your tutorials are so meticulous and exactly what I need to perfect my craft!

[@VioletDoodlesBoutique]

Thank you! Goal achieved! :)

[@nlars6040]

As a previous customer your epoxy jobs are meticulous.....seriously the best!

[@VioletDoodlesBoutique]

You just completely made my day!

[@denisacollier4111]

Thank you for your very specific instructions done slowly where I can understand. You’re very helpful and I appreciate you!

[@VioletDoodlesBoutique]

You are so welcome!

[@bananarama8118]

GORGEOUS!!!! Just simply gorgeous! You are amazing!!! New subbie ❤️❤️❤️❤️ I’m so glad I found you!

[@VioletDoodlesBoutique]

Thank you! Welcome!

[@sherrybernal4376]

Your tutorials are amazing! Thank you so much! My daughter and I will be working on these as we wait for the hurricane to pass through. : )

[@VioletDoodlesBoutique]

Thank you! Please be safe!!!

[@giovannarivera32]

Best tutorial I have seen up to date

[@VioletDoodlesBoutique]

Well, aren't you sweet! Thank you!

[@ashmom2boyz]

Absolutely beautiful & so helpful! I love the turners too. Loving this glitter mix - you did so good 😊

[@VioletDoodlesBoutique]

Thank you. The turner definitely helps.

[@Bobster986]

Violet Doodles Boutique how did you make the turners? That would be a great next video. 😊

[@VioletDoodlesBoutique]

Sorry, that is not in ours plans. I have plenty and they are very time consuming for our busy family. You can search other makers for tutorials on making them and tweak them for your needs.

[@crazyone4u442]

@@VioletDoodlesBoutique awuick basic description wouldn't of killed u, smh

[@VioletDoodlesBoutique]

Sorry to disappoint. My turners are custom made with lots of specialty parts and have been through a few revisions. There is no quick description of them. Hope you have a great day!

[@squirrelycreations]

I have watched a ton on videos on tumblers and I think you are the only one who went over the dangers of wpoxy so well. As a nurse and a newbie I am very thankful for that. As a newbie, thank you for the wonderfully helpful videos.

[@VioletDoodlesBoutique]

Thank you. I highly recommend reading the entire data sheet for whatever chemical you are using. If it is not in the package, you can find them online at the manufacturers website.

[@MommaSunshine]

Thank you for your tutorials! I am doing my first project today- an aluminum water bottle I’m making for my son that I prepped yesterday. Your work is beautiful and your instruction concise. Thanks again! :)

[@VioletDoodlesBoutique]

Thank you! Have fun!

[@reneew8082]

Love the pink and orange... pretty

[@VioletDoodlesBoutique]

Thank you!

[@summersunshine2308]

Great Tutorial and such beautiful work!!

[@VioletDoodlesBoutique]

Thank you very much!

[@oliviajoelle]

Not a tumbler designer but your methods helped me with a different resin project I have planned so thank you very much! Also you voice is very soothing, making the tutorial much more enjoyable :)

[@VioletDoodlesBoutique]

Awesome! Thank you! I love hearing that!

[@amarisrodriguez7808]

Love love love your turner

[@VioletDoodlesBoutique]

Thanks!

[@candacemorrison1204]

You are amazing! Beautiful work! 💕

[@VioletDoodlesBoutique]

Than you!

[@maviskleavell3439]

Love your tutorial!! Thank you

[@VioletDoodlesBoutique]

Thank you and you're welcome!

[@Ms88keys1]

WoW! Incredible! So cute.

[@VioletDoodlesBoutique]

Thanks

[@pepperann2589]

You are so cool! Very thorough! Wow!!

[@VioletDoodlesBoutique]

Thanks! I try to be thorough without going too far.

[@Eddiessister]

Gorgeous. I love it 😍

[@VioletDoodlesBoutique]

Thanks!

[@Shino8124]

So pretty 🤩

[@VioletDoodlesBoutique]

Thank you!!

[@sherrymccary9406]

Thanks for your awesome tutorials and sharing your methods! I am hoping to be able to make my first tumbler this afternoon if the plumber will hurry up replacing our water heater and leave.

[@VioletDoodlesBoutique]

How did it go?

[@Katasha1]

Thanks for this video, very informative and educational

[@VioletDoodlesBoutique]

Thank you

[@Jerrisdesigns]

Terrific video and full of incredible information. Thank you Jerri D.

[@VioletDoodlesBoutique]

You're welcome!

[@erinbosch2775]

This looks like such a fun project

[@VioletDoodlesBoutique]

It is!

[@MommaBear1971]

Your channel is the BOMB!! I had to subscribe to it!!

[@VioletDoodlesBoutique]

Thank you!

[@Alisa_digitalgranplan]

Beautifully done, good video

[@VioletDoodlesBoutique]

Thank you very much!

[@kittycatsalinas]

So pretty!

[@VioletDoodlesBoutique]

Thanks!

[@michellecook6252]

Gorgeous creations

[@VioletDoodlesBoutique]

Thank you!

[@raynej5928]

Great job👍🏼

[@VioletDoodlesBoutique]

Thanks.

[@EllenJB]

Very cool!

[@VioletDoodlesBoutique]

Thank you!

[@alinaovalle8295]

I loved the colors so much I made one like this!! Just nervous to do the epoxy stage😫

[@VioletDoodlesBoutique]

Thank you. Be sure to research the appropriate safety gear. It really isn't hard but can be toxic.

[@victoriadifalco5095]

I absolutely love your work and I feel like your helping me learn how to make these very cool cups. Could you show us how to make a school bus tumblr please, I'm a school bus driver and would love to make some for my friends and myself

[@VioletDoodlesBoutique]

I believe those are just a yellow glitter and the rest is done with vinyl. You can probably find the cut file on Etsy.

[@trentbullock2443]

That turner is awesome! ;)

[@VioletDoodlesBoutique]

Thank you! A very talented engineer executed it perfectly!

[@krisparker1856]

@@VioletDoodlesBoutique DO you know where I could buy a turner?

[@VioletDoodlesBoutique]

Check Etsy. There are several turner makers.

[@nlars6040]

Yay!! One of those is heading to our house!!

[@VioletDoodlesBoutique]

Hurry up USPS!

[@nlars6040]

@@VioletDoodlesBoutique it arrived!!!!🤗🤗😍😍

[@VioletDoodlesBoutique]

WOO HOOO!

[@karilawrence9451]

The finish is beautiful. This video was very helpful. For each additional layer of epoxy do you tape it off in the same place or leave a little bit of space so each layer can adhere to the cup?

[@VioletDoodlesBoutique]

Thank you. I move the tape about 1/8th inch each time.

[@Bethanysmith12]

Hi! I love this video! I'm using it to make my first ombre! I would love to know if you can use a blow dryer at the least until I get something a little better??

[@VioletDoodlesBoutique]

You can but do it on hot and low flow. If you have a torch or even a BBQ lighter, you can also do that. Thanks for watching!! Good luck!

[@ericastevens5959]

Thank you for this video. You take time to explain and teach how to do this process!!!!!! Can you do a video on different designs using the glitter. Like a glitter swirl tumbler. Thank you you for the health info on breathing epoxy. I am looking forward to more videos!!! Be blessed and keep up the great work!!!!

[@VioletDoodlesBoutique]

Thank you! I have several videos that show different techniques. Here is the glitter swirl: kzbin.info/www/bejne/jnq1h3adgZJsjbs Thanks for watching!

[@ericam9101]

Love your cups so glad I came across you page! Maybe I missed the video but do you have one where you show the stage you put the vinyl on like the pink one you have on the right?

[@VioletDoodlesBoutique]

I apply vinyl after a smooth coat of epoxy, usually after the second coat.

[@joannkessinger3397]

I would love to have a turner like that. He should consider doing a how-to video on how he made it. Very nice!

[@VioletDoodlesBoutique]

I don't think he really wants to make another one. I asked for two more... he's stalling. :)

[@mbickerstaff1984]

Do you mind saying what the rubber black end pieces are and where they were found? As well as the metal pipes pieces? I’ve built a decent turner myself but I’m not thrilled with the football on the PVC. I just feel like as if it’s sturdy enough.

[@VioletDoodlesBoutique]

The black on the ends of the pipe are actually tesa tape. It is a soft tape meant for wiring. It was just what we had on hand. We used it to make the PVC fit a little tighter on the pipe but still easy to get it on and off. You can find it on amazon. The pipe is a stainless steel pipe that we bought and had cut down to our specs. He is an engineer and designs machines for a living. It is definitely sturdy and hardy.

[@pinkcornercreations]

Your epoxy came out perfect! Where did you get your turner? I like that you can take off the cups.

[@VioletDoodlesBoutique]

My husband made it.

[@loubascelli2545]

I’ve enjoyed all the videos you’ve posted. However, can you provide some info on your turner?

[@VioletDoodlesBoutique]

Lou Bascelli Well, it was custom made by my engineering husband. I just told him what I wanted and he went with it. It’s chain driven, has one motor meant for a 3D printer, and turns 5 at a time. I had an MDF body that I might paint some day.

[@jenastone4025]

Tumbler newbie here so-thanks for your tutorials! For the chunky glitter cup on the left is it the same technique as the ombre you did with the pink and orange tutorial??

[@VioletDoodlesBoutique]

It's a little different. For that one, I did the same technique for the teal and purple, both fine glitters. Then with the first coat of epoxy, I added the chunky, let it cure and recoated it.

[@cvelazquez09]

After I sand my cups, I've noticed little imperfections in my epoxy. Like little clear bumps- they look like bubbles but aren't because they don't pop after applying heat. After you wet sanded it what did you use to dry it? a paper towel? microfiber towel?

[@VioletDoodlesBoutique]

It might still be bubbles, you can try a torch too but be careful not to burn it. I usually use paper towels but coffee filters work better.

[@missiya1784]

Hi. I love love love your works! I just watched your ombré video. Could you Please say how you transitioned to the glossy stuff and what’s the glossy stuff you used before applying the epoxy? #newsubie #new to this world too

[@VioletDoodlesBoutique]

After your design is finished and completely dry, you will want to coat it with epoxy. Here's how: kzbin.info/www/bejne/fnWtmYCpjM1msMk

[@carleisethompson5365]

Thank you for sharing now i think im ready to try this. I brought the spinner months ago being scared and left it in the box. What did you use on the cups before you put the glitter on?

[@VioletDoodlesBoutique]

You can do it! Here is my prep video. kzbin.info/www/bejne/gnLNoaKDebJ8i6M

[@ladonnamontalto917]

Thank you for such a detailed video. I love your work and you are one of the ONLY tumbler makers that stresses the importance of PPE while working with epoxy. I have a quick question: one of the reasons I don’t tape off is because I can’t get my epoxy line smooth enough to my liking. You say that you remove the tape after 20 mins?? How does your epoxy not run down past your line after you remove the tape? Whenever I try, my epoxy is still very flowy and the epoxy drags the glitter down with it, making an ugly uneven line- not smooth at all.

[@VioletDoodlesBoutique]

Every epoxy is different. You may need to let it spin longer. I have found my sweet spot between 20 and 60 minutes. Then to get the smooth line, I wipe it with a baby wipe.

[@briwilson4819]

The cup to the right is gorgeous! Do you have a video on how you did that one or can you tell me the materials you use? Especially for the lettering!! That's my daughters name and i would love to make something similar!!!

[@VioletDoodlesBoutique]

I didn't record that one but it is a hot pink glitter (maybe Drive Thru Daiquiri from Mr. Nola's glitter on a white base). The design is all glossy and opal vinyl i cut on my Cameo.

[@tammymurphy1268]

Great vid...!!!!.where did you get the multi turners?? Or the small motors?? Tkxs!!!

[@VioletDoodlesBoutique]

My husband made it. I have few details but is is all controlled with one motor. I think the motor is meant for a 3D printer.

[@tammymurphy1268]

@@VioletDoodlesBoutique ok tkx so much...your art is amazing

[@VioletTakacs]

Thank you for sharing. These are beautiful! How does the epoxy hold when washing the tumbler?

[@VioletDoodlesBoutique]

After cured, hand washing is fine. I have some that are a few years old and get used weekly.

[@VioletTakacs]

@@VioletDoodlesBoutique Thank you so much for your reply!

[@VioletDoodlesBoutique]

No problem.

[@sarabilove8187]

Love your videos! Is there another option to cure it instead of using Epoxy?

[@VioletDoodlesBoutique]

Thank you. If you want to use the cup to drink from, you will need to protect it and seal it with epoxy.

[@thedareneewilliams8360]

Wow! You got a great set-up who made you the turning dowels that's amazing thanks epoxy much easier Beautiful cups must be selling them that's a lot of work in investment have a great day

[@VioletDoodlesBoutique]

Thank you. Yes, it is an investment. My husband made the cup turner for me based on my needs. I have outgrown it already.

[@thedareneewilliams8360]

@@VioletDoodlesBoutique nice husband too😆

[@VioletDoodlesBoutique]

Yeah, I kinda like him. ;)

[@amandafeist806]

What did you use for the motor?

[@VioletDoodlesBoutique]

I am not sure exactly. It is meant for a 3D printer.

[@amberleeschroeder7516]

Your epoxy looks amazing. I’m struggling with mini craters come morning after applying my epoxy. I think I have figured out that it’s from bubbles and maybe over working it on the cup. I tried a heat gun and still got a few small craters. Do you warm your epoxy at all or keep your room at a certain temp? I’ve tried warm (over 70) and cooler (under 65), it seemed to thin when it was warmer, but I’ve read everywhere warmer is better lol. Any suggestions would be amazing!!!

[@VioletDoodlesBoutique]

Those dimples could be from several factors: temp, amount of epoxy used, oils from handling, the glitter itself, bubbles... I don't warm mine except for the heat gun after applied but I do keep my room warm. Here are my steps: *prep cup- sand and wash with dawn *sometimes basecoat *glitter *seal glitter for chunky or complicated designs *epoxy 1 or 2 times *lightly sand and wash with dawn *decal *wash with dawn again- I never skip this step! *epoxy final coat *wait 3 days and clean cup well with (bare stainless with acetone) and then whole cup with dawn I hope this helps. Let me know! Good luck!

[@VioletDoodlesBoutique]

The rims, inside, and bottom of the cup that are still bare stainless steel. Those parts, I clean with acetone to make sure the paint, glitter etc are cleaned off well.

[@erikamoorehead4101]

@@VioletDoodlesBoutique what do you deal the glitter with?

[@VioletDoodlesBoutique]

I seal the glitter with epoxy. Here is my epoxy video. kzbin.info/www/bejne/fnWtmYCpjM1msMk

[@tiffanyfair2487]

Love it.... how long do you wait before you Gabe the tape off?

[@VioletDoodlesBoutique]

between 20-60 mins

[@nataliegriego837]

Such a simple yet well explained tutorial. I ABSOLUTELY LOVE that tumbler!!! 😍😍😍 What machine do u use for your decals???

[@VioletDoodlesBoutique]

Thank you! I use a Cameo 3.

[@wicked5by5]

What type of base paint do you use? So you paint, mod podge, glitter then epoxy? If you want to place in dishwasher what supplies do you use? Thank you

[@VioletDoodlesBoutique]

I use spray paint for a base. Yes, that is the basic process. These are not safe for the dishwasher.

[@MiaAgnewRealtor]

Hello love these. I would like to make my own for family members. Can u PLEASE tell me Where is the least expensive place to get the cups and glitter and glue? THANK U IN ADVANCE FOR YOUR HELP!!!❤️🦋

[@VioletDoodlesBoutique]

Check the descriptions of my videos. I try to list the supplies I use and each video has a few different things. This can be an expensive hobby and there is no one place I shop.

[@ashleycarpino3396]

looks great! did you let it spin until it dried?

[@VioletDoodlesBoutique]

Yes, I usually do them in the evening and let them go overnight.

[@samimuso5049]

What color glitter is the orange color and where did you get it?! Love this video!

[@VioletDoodlesBoutique]

It is Neon Orange from Recollections. I list the supplies in the video descriptions for your reference.

[@carls418]

HII! Thank you so much for this video. I don’t know if you will see this or not but if I don’t have a fancy turner like yours what should I do? Just keep turning it with my hand for 20 minutes??

[@VioletDoodlesBoutique]

You can hand turn but its a lot longer than 20 minutes. Search hand turnining. Minderella has a tutorial on how to do it. You can get smaller turners on Etsy, Amazon, and even Hobby Lobby now. The black no-name one from Hobby Lobby is around $30ish and I have 3 that I like. Stay away from the Spin It brand- junk junk junk.

[@lmf5996]

Is there another tutorial when you first applied the glossy stuff

[@VioletDoodlesBoutique]

This is the tutorial on how to apply epoxy. It is the same process for every coat.

[@mindythompson9686]

Do you do this same process for the first coat?? Does the glitter move when doing the first coat??

[@VioletDoodlesBoutique]

Exactly the same for every coat. Yes, the glitter can move. If you are worried about it, you can use a clear spray sealer.

[@ronandmistyify]

Have you found an epoxy wholesale supplier yet that you recommend? (I’m looking for one for wood projects) My KitchenAid Stanberry mixer might be my quick fix for a turner... may need a second one for the garage studio for the toxicity issues lol

[@VioletDoodlesBoutique]

I haven't found a wholesaler for epoxy. I actually haven't looked for one. Ventilation and proper safety equipment is a must.

[@honeydoranstone6563]

When do you apply the decal? Before the first layer of epoxy or after the second layer of epoxy?

[@VioletDoodlesBoutique]

After a smooth coat of epoxy. Usually on the second coat with some light sanding first. Then clean well and epoxy again.

[@tamarabandeo3841]

Sorry from Argentina I ask you ... How did you arm the capacitor so that the 3 glasses turn at the same speed at that speed!?

[@VioletDoodlesBoutique]

I have one motor that turns a chain. All of them turn together.

[@justwingitkreationsbyleigh1301]

How do you clean the epoxy up nice just over the edges of the ‘color & epoxy’ line ? Once you remove the tape line

[@VioletDoodlesBoutique]

I show that in the video. I just use a baby wipe.

[@carenmallela]

Do you also use the heat gun after you apply the epoxy after the decals?

[@VioletDoodlesBoutique]

I use the heat gun each time I apply epoxy. It helps pop bubbles and smooths the epoxy for an even layer.

[@martiajones5347]

2 questions: 1. Are you able to substitute a hair dryer for the heater? 2. Is the vinyl on the other cup to your right underneath the epoxy?

[@VioletDoodlesBoutique]

I am afraid the hair dryer would blow too hard and not have the heat it needs. Heat guns don't blow very forcefully and get a lot hotter. You can also use a mini torch. All of my vinyl is sealed under epoxy.

[@ibarraone2]

Do you have a video.on how you did the very first coat of epoxy?

[@VioletDoodlesBoutique]

I don't but it would be the same way. I have this video that shows epoxy over dill weed. kzbin.info/www/bejne/eXqreKmwabpprtE

[@shawnasmith3371]

I glittered just like you did and your directions were spot on and amazing! Thank you! I did have a question on times. When you apply epoxy and you feel it is fully covered. How long do you continue to let it spin? And how long do i leave it sit before i can give it a second coat? Thank you💜

[@VioletDoodlesBoutique]

It depends on your epoxy. I will let mine spin for 6-7 hours and then, if it needs another coat before anything else, I will do it then. If it needs a decal or sanded, I wait 12 or more. I will wait 3-5 days before I ship it or deliver it to its new home. I don't like to rush the steps, because it never fails that I will mess it up and have to wait longer to try to fix it.

[@shawnasmith3371]

Violet Doodles Boutique Thanks for the helpful tips!

[@vickiejohnson3898]

I would like to more about your turning station for your cups. Where did you get it?

[@VioletDoodlesBoutique]

I don't have a lot of the details. My husband made it for me. I have answered a few questions in the comments of this video if you want to scroll through. But I was pretty hands off. I just told him how I wanted it and he came through.

[@kathrynkeller9261]

Where do you get the Turner? Did you buy it or build it yourself? That looks like a huge help to your craft. Beautiful work!

[@VioletDoodlesBoutique]

My husband built it. He is a mechanical engineer, so I just told him what I wanted. It is a huge help for sure! Thank you!

[@monicamorgan9417]

Can he build one for me? It's super awesome!

[@monicamorgan9417]

I love your work

[@VioletDoodlesBoutique]

Ha ha. It is awesome, but he isn't interested in making more.

[@VioletDoodlesBoutique]

Thank you!

[@LovetoLaughPlaytime]

I would love to learn how to make that turner

[@VioletDoodlesBoutique]

Sorry, my husband makes them for me.

[@jennifermehrhoff2291]

can you use a cup that has diamond shape indentions in it or does it have to be a flat metal tumbler?

[@VioletDoodlesBoutique]

Epoxy is self-leveling. I'm sure it would work but you may need to do more layers to cover everything.

[@oliviawarren6356]

did you make that turner yourself? thats creative

[@VioletDoodlesBoutique]

My husband made it with my input.

[@faiththomas9533]

Im a New subscriber today!! Can you or have you did a video on sanding the glitter?

[@VioletDoodlesBoutique]

Thanks for the sub! You will want to hold off sanding until epoxy. I sand after the 2nd coat of epoxy. If you sand the glitter, you will end up sanding the color right off the flake.

[@amandarodriguez6650]

Love your work ....how much for a cup?

[@VioletDoodlesBoutique]

Thank you. I am booked now and have had to start a waitlist. You can email me at [e-mail] and I can give you a quote and add you to the list if you'd like.

[@idabrewer6665]

I wonder if it would be possible to thermal paint those cups, and the encapsulate with the epoxy. Just thinking. lol How much are your cups? I love the pink & Orange.

[@VioletDoodlesBoutique]

Yes! I haven't done it personally but I have seen them. I have done UV color changing cups. So many possibilities! I am closed for custom orders until after the holidays but you can order by sending me a message through my socials or email [e-mail]. Thank you!!

[@alinaovalle8295]

Do you have to make another batch of epoxy, when you do your second coat or last coat of epoxy?

[@VioletDoodlesBoutique]

Yep, it will start to set up in about an hour, harden almost completely within 6 or 7 hours, and fully cured in 3-5 days.

[@adamfathi9192]

Is there a video, plans, or information somewhere for the turner? I'd like to build one

[@VioletDoodlesBoutique]

There are several n KZbin from other makers. I do not have plans for this one.

[@vickeejones3461]

Can you please tell me how long a cup has to stay on a cup turner actually turning? Is there some point where it is cured enough that I can take it off and let it finish without turning so that I can put another cup on? I only have one cup turner.

[@VioletDoodlesBoutique]

I usually do mine overnight. If I am in a hurry and trying to load up turners as fast as I can, I will turn for 6 hours and them set it to the side. You have to be careful though, it will still be soft and can leave finger prints (ask me how I know, lol). If you do it too early, the epoxy can slowly run down and create a hump.

[@Eemxietyy]

Did you apply the vinyl on the cup before the first epoxy or after the first coat?

[@VioletDoodlesBoutique]

I apply vinyl after a smooth coat of epoxy, usually after 1 or 2 coats.

[@ashleymolina464]

How did you make the cup turner? Can you please show us

[@VioletDoodlesBoutique]

My husband made it and said he will not make them to purchase.

[@snowbunny81086]

How much epoxy do you use for each layer of the cup?

[@VioletDoodlesBoutique]

It depends on the size of the cup and if it is going on glitter or a smooth surface. I typically do multiple (4-5) cups at a time and make 60- 90 mls at a time.

[@rtcadventures6719]

Where did you get those wonderful turners

[@VioletDoodlesBoutique]

My engineering hubs designed and built it for me after I told him how I wanted it to perform. It is a beast! I love it. (he doesn't sell them)

[@ronandmistyify]

RTC Adventures wish he would sell them!

[@VioletDoodlesBoutique]

Sorry, that is not in our plans. You can search for other makers that do have tutorials and tweak them for your needs.

[@shanecearmstrong3746]

Do you have to use a cup spinner and do you hav too use the heat dryer

[@VioletDoodlesBoutique]

You can spin by hand but you will need to dedicate several hours (6-7 hours) to turn it by hand. The heat gun helps pop bubbles and even out the epoxy. I don't always use the gun if I don't see the bubbles.

[@Beautythatcounts]

I need a Turner. Any suggestions?

[@VioletDoodlesBoutique]

Check Etsy. There are lots of turner sellers. Read the reviews and ask the seller questions to make sure it is what you are looking for.

[@Calmnbutterfly515]

Another question what type of tumblers did you use, and also did you buy the cups, if so where?

[@VioletDoodlesBoutique]

These are all Hoggs. You can get them from The Stainless Depot Co wholesale or Hogg Outfitters retail. All of my supplies are listed in the description of my videos.

[@toddlonniabeam7275]

Need to ask. When I apply the two part clear and let it spend for four to six hours I have uneven places. Also some places you can feel the glitter. What am I doing wrong ?

[@VioletDoodlesBoutique]

That is a common issue. It could be due to several factors. If it is over a chunky glitter, spray seal it first and that will help. You can go over it again and it should be more evenly covered. Sand after two coats and wash well with Dawn. Then coat again. Good luck.

[@kiara3651]

Instead of using your hands can you use like a paint brush cause I want to try this but I feel like if I do it, it won’t be smooth if I use my fingers

[@VioletDoodlesBoutique]

You can use a paint brush or foam brush but they would be single use and can incorporate bubbles. You can also use a silicone makeup spatula and apply it with that but I find those to be more work than just using my hands. The epoxy is self-leveling, so if you get it on the cup as even as you can it will settle and smooth out on its own.

[@quietrain7]

Great video. Does your husband sell the tumbler turner? I would like to purchase

[@VioletDoodlesBoutique]

Thank you. Sorry to say he does not sell them.

[@jovitacharite2190]

Hi where do u get the equipment or machine from to place the tumblers on?

[@VioletDoodlesBoutique]

My husband made my turner. Check Etsy for small businesses that make them. Michaels just started carrying a single. I will do a review on it soon. Amazon also has some.

[@valerieevans2676]

Do you apply your decals after you epoxy them or put them on and epoxy over them?

[@VioletDoodlesBoutique]

Epoxy until smooth, apply vinyl, epoxy again.

[@thefreckledafrikan]

I’m new. Did you tell us where to get the spinners from in another video bc I don’t see the information in the description box

[@VioletDoodlesBoutique]

My husband made it for me. I have few details.

[@martiamartia9009]

Amazon has them

[@gperez113]

Where did you get your Turner? If you made can you video it to teach us?

[@VioletDoodlesBoutique]

My husband made it. There are tutorials on youtube by other maker that show similar ones.

[@ladyd6911]

Can the epoxy method be used on acrylic tumblers or only stainless steel?

[@VioletDoodlesBoutique]

I have done it on glass and stainless. It can be done on acrylic but I have not done it. If it can flex very much, the epoxy can crack or separate from the base and create problems.

[@SabrinaLiang10]

How did you build that table with a motorized spinner for the tumbler?

[@VioletDoodlesBoutique]

My husband did.

[@Calmnbutterfly515]

Can you do a video on how you applied the bunny on the glitter cup please?

[@VioletDoodlesBoutique]

It is just vinyl that I cut using my Cameo.

[@VioletDoodlesBoutique]

facebook.com/VioletDoodles/videos/2232639296988498/ Here is the time lapse I posted on my FB page from when I did apply it.

[@julietisabella3509]

Yes can you still do a video on it !

[@VioletDoodlesBoutique]

I can add it to my list. You can search "layering vinyl" and get some help now.

[@robertraymond5964]

What causes fish eyes? How do you fix them? Also, do you mod lodge under all of your glitter it fo you ever epoxy under?

[@VioletDoodlesBoutique]

Fisheyes are caused by debris or residue that hasn't been cleaned off.If you already have them, lightly sand your cup and wash it WELL with Dawn. Dry it with a coffee filter or microfiber towel and reepoxy. I use MP and epoxy to apply glitter. It depends on the technique I am working on.

[@lovekisses99]

New subscriber! Do you make these for others?

[@VioletDoodlesBoutique]

I do. You can send me a message through FB or IG. Violet Doodles Boutique if you'd like to order.

[@heatherellsworth4353]

So the process is: MP, glitter then let dry. Another layer of MP and glitter and let dry. Then apply the epoxy resin and done?

[@VioletDoodlesBoutique]

Yes, you may have to do two coats of epoxy to have a smooth finish but that is the basic idea. If you are adding vinyl, do it after a smooth coat of epoxy and then seal it again.

[@Alohagirl1967]

Where could I buy the machine Turner?

[@VioletDoodlesBoutique]

Etsy has many turner sellers.