Glitter Tumbler Tutorial - Epoxy + Loctite Method - Full Process Start to Finish!

[@JenniferMaker]

I’m so happy that so many people are enjoying this video! A few important tips to remember if you want to try this yourself: Watch my epoxy safety video at kzbin.info/www/bejne/h4WkdnmAm9FkrJY and make sure you use your epoxy in a well-ventilated area, wear a full-face respirator with organic vapor cartridges, nitrile gloves, and a PVC apron, and keep your work area clean. I understand this video doesn’t go into enough depth about safety, but my later videos do and I now have a dedicated video just on epoxy safety! You'll find the Ombre (and Rainbow) Glitter Tutorial at kzbin.info/www/bejne/lYm7gHZ_lqqfa5Y

[@meagonribeira1161]

Where do you get your tumblers to decorate?

[@jo.p4921]

Thank you

[@jo.p4921]

@@meagonribeira1161 on the video she said Amazon.

[@meagonribeira1161]

@joannapetrella awesome! I didn't hear it say that my kid was probably screaming when she said it lol! :) Thank you

[@milliken33]

Jennifer Maker I’m have officially made 2 of these tumblers now but did glitter all the way to the top and bottom. Both my cups are very rough on the top and bottom rim. Do you have any pointer for me? Why does this keep happening?

[@lizzyjo7454]

Somebody get this woman her own TV show!!! Your amazing!! Thank you!

[@glendyr.7087]

agree with u!🤝

[@CHAPARRITA818]

lizzy jo seriously

[@Graceisamazing805]

hi

[@aungelitawilliams3995]

yes yes yes!

[@beckyposton7995]

Absolutely. My first time watching this video and now I want to make some tumblers. Jennifer Maker is awesome!!

[@AffiliatedBynumber]

I just wanted to say thank you SO SO SO much for doing such a professional tutorial. Listening to someone speak like you instead of "uh, like, ya know" every other word was a dream come true lol Great tutorial and thanks for the suggestions on products!! You're wonderful!

[@kathyfitzsimmons1489]

Thank you for the step by step instructions! Can't wait to try this! I'm a newbie but I think I can handle it. 😁

[@kaceeboxers3580]

I’ve watched dozens of tutorials on glittering and epoxying tumblers and by far, yours is the most comprehensive and detailed. Thank you for this wonderful tutorial. The finished tumblers are gorgeous!

[@Steph-412]

I appreciate your tutorials more than you know. Not only are you teaching us, but you're also saving us money and time because we don't have to deal with trial and error to make these wonderful projects. You are THE BEST Jennifer Maker!!! 💞

[@JenniferMaker]

Aww, you made my day, Stephanie! Thank you so much for your wonderful comment! I'm very happy you're finding my tutorials helpful! :)

[@patriciafranks6777]

I had considered doing these tumblers a year or so ago. I was in a group but honestly the people who were there made it sound impossibly difficult. This tutorial is awesome. Thanks Jennifer!

[@n3rdygrl]

A tip as far as spray paint goes, if your glitter is translucent a base coat goes a long way. You'd need many coats of translucent glitter to get a solid covering. Base coating, especially with a matching color helps reduce the coats of glitter you need for good coverage

[@brookeboyett2771]

Just In case ya may have missed that part at the beginning, That's precisely what she did. :)

[@n3rdygrl]

@@brookeboyett2771 I was responding to Jennifer's statement about not needing to base coat and clarifying why one might need to. ;)

[@adrianaariza-jones3694]

@@n3rdygrl You should have your own channel if you know so much !

[@dianebrown1721]

Someone, on one of the cricket Facebook groups I belong to suggested your tutorials. So glad she did!!! You are amazing!! Thank you! I've been wanting to make these epoxy tumblers for a long time. You made me think I can do it. I gotta go get the supplies and I will bring you along on my tumbler journey!

[@hannah06412]

This is a weird comment but, you have a very calming voice.

[@jobosworth1761]

I found it to be calming also.

[@gheryeguiluz1538]

Yes!!!

[@rcaruso4467]

I so agree!she does have a very calm voice!

[@motobabydoll9795]

Omgosh yes she does! I already get so relaxed watching people make things. I was telling my family her videos put me to sleep bc they're so relaxing but I want to learn from them 😆

[@kattiaesixx]

She is adorable

[@mildredaponte7645]

New to all this. Need to make t-shirts for my church group. I love the way you explain. GOD BLESS YOU. Excited to start.

[@sandrawalters]

Hi Jennifer, first off, let me say that I always enjoy your videos. You go into such great detail that even a first-time crafter can follow the instructions with such ease. You always make such beautiful projects, I love them all. Being new to tumblers myself, I am surfing KZbin almost all day, every day, to learn as much as I possibly can. With that being said, I watched a video the other day where the host was using chunky glitter and she took an extra step to almost guarantee that the glitter lay flat on the cup before any other steps were made. She used Reynolds plastic wrap (though I am sure parchment paper would work as well) and placed the tumbler flat on one end and rolled it while pressing against the tumbler. This process allowed her to flatten the glitter against the tumbler. I thought that it was a great idea and wanted to share it with you and the readers in case you or someone else wanted to try it.

[@JenniferMaker]

Wow! Thank you so much! 😃

[@debchambers50]

You are such a great teacher. I have seen a few videos on the tumblers and you are so informative. Not only have I watched this video but many others. You have the best personality to teach. Your “ Greg” is a great help also 😁

[@dianejohnson9981]

Dlonne To

[@3LeafCustoms]

Jennifer, loved the video. But I wanted to share with ya that if you are stopping the turner while it is still attempting to turn, over time, you can mess up the bearings and/or gears inside. Stopping the turner for a second to remove the tape would've made the cleanup a bit easier all around. Also, acetone is amazing on sloppy wet resin. Thanks for the video! they look great!

[@JenniferMaker]

Thanks for the tip Anthony! Thanks for watching!😊🌻

[@fleshiart9272]

Here is a chunky glitter tip to help you get a much smoother finish. If you do a burnishing technique the glitter Will lay flat instead of being lumpy. I use a cheapy paint brush to burnish while the adhesive is still tacky. Works like a charm.

[@daveywaves5325]

Nice tip, and ty.

[@ravenwood5215]

Burnish? I will have to google!!

[@carlarichards5020]

How do I do this?

[@hockeymama04]

@@daveywaves5325 cat sniffer? Lololololol 🐱

[@yappita]

You are awesome! I don't have the patience to sit and watch how-to videos because I feel that they talk way too much about non necessary things , but you , are so informative and I love how you share your tips and experience! Thank you so much!

[@JenniferMaker]

You are so welcome! Thanks for watching!😊🌻

[@recomalone9355]

My this is very awesome. I must say i don't post much to social media. But i do see why your winning hearts with amazing crafting. My wife has been talking about your tutorials a lot. Now I see why.

[@JenniferMaker]

Thanks so much! You made my heart smile today! 😊

[@hopeloggins3436]

I loved how you showed different options and my goodness this project takes alot of patience and you definitely have it

[@JenniferMaker]

Thank you! Cheers!

[@jenniferlynn1400]

I randomly stumbled upon your channel last night & I am sooo glad I did. You’re amazing. I’m definitely inspired to be more crafty.

[@michelletorres2359]

This is an excellent tutorial!!! If you don’t want to sand it down, you can use epoxy as your adhesive. That way you can skip the sanding step. However, your tumblers are gorgeous so it doesn’t matter if you use adhesive! Excellent job!!!

[@amandamcnair1782]

Now is epoxy also an adhesive as strong as the loclite?

[@waffleLYNN]

Omg out of all the videos ,yours is THE BEST,clearly explained,to the point & the product is beautiful!!!

[@thefrannypanny]

Wow! I don't know how I got here. I saw the word glitter so I decided to watch it. This video blows me away! I did Not even know a person could make their own glitter tumblers. They look so professionally done. I have a stainless steel tumbler and I am excited to give this a try! Thank YOU so much

[@JenniferMaker]

Have fun! You'll become addicted! ;)

[@merrymacmurphy]

have you tried mixing the glitter into the Modepodge and then painting it on, instead of sprinkling? I have done this with other glitter crafts and it worked well and helped improve the coverage. May work here.

[@NaturallySewCrafty]

I watch a lot of craft videos! I always love how thorough your videos are. Great tutorial!

[@Bagheera23608]

This is just amazing. I can't get over how calm and soothing you are, and yet easily watchable. How you cover EVERY SINGLE STEP. You're giving me a the courage and knowledge to try this, I've just got to slowly work up to getting all the supplies

[@nikistone6247]

Omg one of the best tutorial videos I've ever seen!! Not taking too fast, very informative, show in layman's terms, have a breakdown of why one product worked better than the other, shared your personal preferences, have short cut tips.... need I say more!! Thank you soooo much!!

[@JenniferMaker]

Aww, Niki, thank you for your kind words! We try hard to make our videos easy to understand, while at the same time covering everything you need to know! It makes my heart happy to hear when we succeed so well! Thank you! 😍

[@kristencox3751]

I am new to this whole crafty world but it is a dream come true to find such a professional and caring craft guru! I cant wait to venture onto the rest of your videos! Thank you so much!

[@JenniferMaker]

Thank you so much! So glad to have you here crafting with me! :)

[@mclark2288]

Your videos are so well done. You really give details. And I love how you tested different options and showed the results on each.

[@ncdiva24]

I have watched you for 2 hours and have learned so much. Thank you so much!

[@itsmecolombia5831]

I just bought my first Cricut so i can make these tumblers. You explained everything so well. I can't wait to start! ❤

[@JenniferMaker]

YAY! Happy to be of help! Best of luck on your tumblers! :)

[@jordanutley620]

Me too!! This video (and Jennifer) were the inspiration!

[@libertyisnotfree9146]

Well done! One small tip: If you wind the electrical tape the same direction as the rotisserie spins then you can just hold the end of the tape and let it spin off....

[@JenniferMaker]

Good to know! ✨

[@BewareTheLilyOfTheValley]

My mom got a Cricut and made a tumbler for my birthday and delivered it just today. It's two weeks after my birthday but WOW, it was worth the wait! I was curious on how she made it so I'm going through possible videos right now but your video started giving me deja vu...and then I remembered. She had shown this video to me months ago. I hadn't paid much attention but it started to filter back in the moment I saw the low-tech tumbler turner, lol! For helping my mom to come up with such an amazing birthday gift, thank you so much! She's making a similar one for my sibling as well. Below is the one she made me. Now...I'm a nerdy girl (woman, haha. Just turned 31) and love Japanese anime. She made this one based on an anime I told her I enjoy. It's her first cup so I do see a few tiny mishaps but it's truly nothing I'm upset over. As I said, I LOVE this cup :) I'm scared to even drink out of it! drive.google.com/drive/mobile/folders/1ptM94M66xAVmtfGuihFk8SSs0XY1iI4s

[@JenniferMaker]

YAY! Nice Job!

[@AFateSoTwisted]

I found a cup turner on the Walmart website for about $15 less than a rotisserie turner. I can't wait to try this! Thank you so much for doing this video.

[@smagee7548]

How did it go?

[@n3rdygrl]

I recommend wet sanding so you minimize dust. Epoxy dust is no joke and you don't want to inhale it.

[@bertdellestep1215]

nrdy grl it also prevents that weird cloudy look you get sometimes.

[@SINGINGuitar7]

nrdy grl What’s wet sanding?

[@Grellibe]

@@SINGINGuitar7 it's like regular sanding but you do it with water. I believe you need a certain kind of sanding material, at different grits. But essentially you wet the object and the sanding sponge and sand it.

[@tawanahicks7439]

My husband makes me use a respirator with charcoal 😢

[@peanut0426]

@@tawanahicks7439 That is the best. And a very well ventilated room. A lot of people have problems with epoxy. Check out Epoxy is not my friend if you haven't yet

[@angelicaaphonephanh909]

You are absolutely AMAZING! I love how neat and professional you are. I would really like to see the tutorial on how you did the other tumblers. :D

[@elishahopkins4062]

Thank you soooooo much for all of your videos. I started making the tumblers and keep coming back to your videos. They are the most in depth and easy to follow. And when I have a question come up I know you have an answer already in the video. Thank you again.

[@JenniferMaker]

You are so welcome, Elisha! I sometimes hear our tutorials have TOO much information, but I would rather have it that way than not enough! Thank YOU for telling me they are "just right"! 😍

[@heidiespinola2669]

I was hoping to make and sell but this is such a long process not sure what I would need to charge customers. However, definitely would make for family and friends as gifts. Thank you,

[@misscrafty9366]

Nice tutorial, I use the same epoxy. I usually mix mine until its clear. I noticed yours was a little cloudy sometimes in my experience if you apply it when its still cloudy you can end up with a sticky tumbler. Mainly because it was not mixed properly. Just a tip just in case anyone tries it and have that problem. :)

[@heckyeshess]

Sonya Lynette absolutely, that brand of resin has a 30 min set time, there is no reason not to take the time to properly mix until clear. If not mixed properly, it will fail in a short amount of time with the resin getting bubbles in it etc.

[@jpawloski1]

Thank you SO much for this video, Jennifer! I’ve watched several others on KZbin and the process seemed pretty challenging. You make it look so doable! Can’t wait to make my first tumbler!

[@jenaiputignano5469]

Rick Satish Harish Kaleb ghost love

[@85vzap91]

I thought at first my connection was going bonkers lol but thank you for posting this video!! I love it!! I see chunky glitter tumblers with vinyl decals in my future lol ♡♡♡♡♡♡♡♡♡♡♡

[@ldyrdr504]

So many tumbler videos and I thought this was impossible to do correctly until I watched yours! I love how you show different methods, too. I just did my first one and its tumbling now. It looks great so far - thanks, Jennifer!

[@JenniferMaker]

Wonderful, so glad you found it helpful! 💗

[@sandiwoolridge6238]

I have to say, you are my favorite crafter to watch; you simplify everything so it's really easy to understand! If anyone asks which KZbin channel to watch; hands down Jennifer Maker!!!

[@MrCatfarmer]

Someone needs to invent a glitter that isn’t messy. My wife has a business that does very well with mugs. I do the graphic work, she does everything else. Now, my house is a three story in the middle of nowhere with 15 rooms. More than we need but I set up one room in the top floor back corner for her crafts and that glitter is in EVERY room. Even found some behind the glass on one of my canon zoom lenses. Every room. About to make a rule she has to strip before leaving that room. 🤣😂

[@JenniferMaker]

LOL! Yes, glitter does tend to do that! Hopefully one day your messy-less glitter wish is created! :)

[@XxNekoJennyxX]

Use a lint roller to pick up glitter :)

[@MrCatfarmer]

@@XxNekoJennyxX Lol yes that does work in the important places. It cost more to have my camera lens cleaned than it would have been to buy a new one which I did. I can spend a day cleaning glitter and ten minutes later she has it all over the house again. I gave up. Now I can sit on the toilet and count the colors on the floor.

[@090857sps]

It's everywhere!

[@kellymcguyer1051]

I've been wanting to make my own for a while now. Thank you so much for the step by step instructions!! ♡

[@JenniferMaker]

Glad it was helpful! 💕

[@amanduhhh95]

Yes please! A tutorial on the ombre tumblers!

[@QueenAmethyst97]

You are my favorite KZbinr for Cricut tutorials♥️ thank you!!

[@JenniferMaker]

You are so welcome!

[@annabellecabiling1183]

Thank you for sharing.... watching from the Philippines, very straightforward tutorial and easy to understand. I must try this

[@JenniferMaker]

Have fun!

[@amyslifelocsandmakeup8731]

I’d love to see how you made the label for the bottom of the tumbler

[@dlkampfhenkel5413]

You are so much fun to listen to and your directions are clear and easy to follow! Now subscribing and can't wait to glittler my first tumbler my fav color... YELLOW!

[@Misse28504]

Can you do a tutorial for the ombre tumbler?

[@JenniferMaker]

I'm working on one right now and it will release very soon!

[@MizKelciK]

I am so excited! i have been checking back on your channel often! I want to make an ombre with chunky glitter for my daughters sippy cup! I love your tutorials! @@JenniferMaker

[@JenniferMaker]

I just uploaded the ombre glitter tutorial at kzbin.info/www/bejne/lYm7gHZ_lqqfa5Y

[@cynthiafrance178]

Jennifer Maker .

[@courtneyjames4664]

@@JenniferMaker your absolutely amazing and make this so easy step by step and taking the time showing each product you use is so helpful does it matter what kind of vinyl you use

[@nickeyfrazier6039]

I just made my first glitter tumbler....it's curing for the five hours as we speak! I'm so excited! I love you and your videos.

[@JenniferMaker]

Yay! Keep me posted on how it turns out! 🌸

[@laceysaxon3225]

I love your detail. And the extra step of spraying the glitter so it doesn't come off while applying the resin. I did shorten the process by using UV resin and UV light. Thank you Jennifer for all of your well explained videos. I have made shadow boxes, glitter mugs with your videos.

[@JenniferMaker]

Thanks for sharing!

[@sierraclinansmith121]

I LOVED this video. EVERY single step explained. Thank you!!

[@StrawBearie]

This is so cool! You broke it down so well that you made it seem easy to glitter a tumbler!

[@kcw4714]

So Pretty! haven't tried these yet but I think I will now!!

[@kellyjo1148]

You are going to be what helps me make my projects!! You teach a way that is easy for people to understand ! I watch you everyday on my lunch and I have learned a lot from you !

[@dianejohnson9981]

Dlonne To

[@socorrocibrian8940]

by far the best “let me show you how “ video !!! lol i like how she explained it thank you

[@JenniferMaker]

Glad you liked it, Socorro! 😊

[@dublintoo]

I love the purple tumbler!! I want to try this! Thank you so much for sharing them!

[@senoracasiano9992]

Thank you for the tutorial intermixed with a review of several products. Excellent video!

[@pam2588]

If you put your tape on counter clockwise , the tape will come off with the rotation of the rotisserie.

[@KimWithSaltyLiving]

My rotisserie changes directions each time I turn it on.

[@krystalferina4883]

That got my ocd

[@kimdulaney7599]

Your tutorials are so helpful. Do u have a video on how 2 make stencils 4 glass etching?

[@TheArielMadison]

I’ve been wanting to start making tumblers forever but everything seemed so expensive and daunting but this video breaks it down so well to give you a great place to start. Thank you so much!

[@JenniferMaker]

You are so very welcome! You can do this!✨

[@deborahbrookshier7712]

You can skip the adhesive and sealer steps if you mix the glitter in the resin. These look great!

[@JenniferMaker]

Ohhh...great idea!

[@Qetesh777]

Love this! I also got a cricut maker for Christmas and I am having fun finding new crafts to make! I am definitely testing this soon. Would love to see the ombré effect

[@KMercedesDesigns]

The tumblers came out beautifully, I love each individual one. Thanks for the step by step video. I just got a cricut and have been watching videos for project idea. I love the purple ombre one the most reminds me of a galaxy effect.

[@JenniferMaker]

Thank you, Kathy! I do love making these! 💗A few tips to remember if you want to try this at home: make sure to be in a well-ventilated area, wear a full-face respirator with organic vapor cartridges, nitrile gloves, and a PVC apron. :)

[@chriscarter1586]

I truly appreciate this video and all the extra effort in the description box thank you for posting everything you use and where to buy it!! 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽😪

[@dianejohnson9981]

Dlonne To

[@hjvagar8606]

They are so pretty. I prefer the finer glitter ones but I think that's because the purple and the red and white one really caught my eye.

[@JenniferMaker]

That's crafting! Each of us has a personal preference!! 😍

[@karolkiefer6179]

I totally agree with all of the comments on how great of a teacher you are. I am wondering if you could show how to macrame plant hangers. That would be awesome! Thank you so much for all of the great information on beautiful projects.

[@JenniferMaker]

Great suggestion, Karol! 😍

[@TruthSeekerNC]

These are gorgeous! You did a VERY thorough job at explaining and giving great tips. I thought the rotisserie turner was an ingenious idea. Loved this video! Subscribed. :)

[@layanneketley4755]

Como que ela fez ?? Não vi no vídeo .

[@msquellakarock-e2858]

Hands down the best video on how to do this! Thank you so much for your patience while teaching and thorough explanation! New sub and sending virtual hugs. You are awesome!! 🤗

[@dianejohnson9981]

Dlonne To

[@PR-pe9oc]

Best tutorial I’ve seen, so far. I would, definitely, like to see the ombré effect. Tsmfs! 😊

[@lynnellemadsen8627]

I love all of your videos. I love that you showcase the pluses and minuses. You are so helpful!

[@JenniferMaker]

You are so welcome!

[@callyross7873]

Very helpful!! can't wait to get started. thank you! I've been scouring thrift stores for stainless steel tumblers, it doesn't matter if they're printed on since i can spray paint over that.

[@JenniferMaker]

Glad it was helpful!

[@cindygv05]

This video is so helpful! I can’t wait to make tumbler! Thank you so much for the tips!❤️

[@melanievilla3519]

Thank you for this video! I appreciate the very clear directions! I had one question... about how much glitter do you need for one tumbler? I am looking at purchasing glitter on Amazon and it would help to have a measurement to look up. Again, thank you!

[@Coirbre]

This was the tutorial I was hoping to find. Thanks so much it was so good!

[@dianejohnson9981]

Dlonne To

[@emilyrainwater7691]

Can I ask why you would want to use the 100 spray adhesive instead of the 300?

[@Lorise69]

This was my question...

[@jessicaels3461]

Can I just say how much I appreciate that you do these detailed videos, testing out all the different techniques and hacks, so that we don't have to! I'm only just learning now before I start, and your videos are fast becoming my binge staples! ❤🎉😊 Much love and blessings from South Africa 🇿🇦

[@JenniferMaker]

Thank you! Love and blessings to you! 😃

[@maryannvillarreal7341]

I so appreciate your time in videos and they have been the most helpful because you are so thorough compared to other endless other videos. Thank you for sharing❤😅

[@JenniferMaker]

You are so welcome! 🥰

[@clsrocks3]

Please share how you do the ombre tumblers!!!

[@JenniferMaker]

Here you go: kzbin.info/www/bejne/lYm7gHZ_lqqfa5Y

[@ersargent9026]

I have always wondered how these are made! (definitely not how I thought hahaha!) I don't know why I didn't look them up sooner. These are so cool and I loved this video! I have a few tumblers/stainless steel water bottles that I have collected over the years, I one got during frosh week my first week off to school. I know it's a cheaper one but I'd like to try it on it to see if I can actually do it before investing a little more. Does this work on any stainless steel water bottle or does it have to be on a more expensive product? Thanks so much. I love your videos! :D

[@JenniferMaker]

I can't give a guarantee that it will work for sure on ANY bottle, but you could try a small area just to test it out! 😉

[@pennichurch8730]

This is an amazing tutorial!!! I'm so ready to make my tumbler!

[@JenniferMaker]

Have fun!

[@laquettaray4985]

We like all of our Tumblers painted and then glitter! Then Decals and Vinyl letters or designs

[@kalynnmeyer3932]

Just started crafts using cricut and Jennifer maker site is the best so far. Thanks Jennifer!

[@JenniferMaker]

SO glad you are following along!!

[@alaniz1992]

Absolutely beautifulll!!! I hope I can make one look like that! 👍🏼

[@breeannakorcak7877]

Ombre tutorial please!

[@dawnbuteau6140]

OMG love this video!!!! Tysm! They came out beautiful! How did you you do the ombre ones?

[@yolandajones5825]

Just found channel and in heaven... Thank you so much for all the detail and instructions...

[@michellehildebrandt3503]

Love, love your videos. You break everything down & show step by step. One thing….inside to hold your tumbler is a football, but what was in the other size hole

[@JenniferMaker]

Thank you! I used the little footballs and duct tape on each end of the manual spinners 💗

[@Insain_creations]

Finding your channel is probably going to put me in a financial bind!! (Kidding, I am more responsible than that!)

[@sandrawilliams1118]

New subscriber! Great tutorial, thank you!

[@nancyhixon1141]

Thank you so much for this tutorial it's one of the best ones I've seen on KZbin! THANKS again🦄🐕🦄🌴😎🌵❤

[@heathermcmaster9546]

Woah. You are an excellent example of nominative determinism.

[@JenniferMaker]

Yes! Yes, I am! 😍

[@shakirahodge4495]

THANK YOU SO MUCH. I'M MUCH MORE EXCITED AFTER WATCHING YOUR CHANNEL FOR THIS VIDEO. I AM GOING TO THE CRAFT STORE WHEN THEY OPEN IN THE MORNING. THANK YOU LOVE FOR THE INSPIRATION.

[@JenniferMaker]

Have fun! You're going to love it!

[@87wxdiaz]

please tell me your using a respirator when your babysitting those cups

[@JenniferMaker]

This video doesn't go into enough depth on safety, but later videos do and I am working on a full video just about epoxy safety in the hopes I can educate more people. I now wear a full-face respirator with organic vapor cartridges, nitrile gloves, and a PVC apron. :)

[@87wxdiaz]

@@JenniferMaker cool I've just been seeing so many diy that are like hey hang out in front of it no respirator or mention of at least well ventilated area I mean I had a wimpy n95 carbon filter set n gtfo Asap it was table top so a bit easier way less baby sitting lol I think the vid I watch before this some girl wasn't told at all about safety now has respiratory issues I felt terrible for her.

[@87wxdiaz]

Btw u got a new subscriber

[@JenniferMaker]

@@87wxdiaz Thank you for subscribing!

[@JenniferMaker]

@@87wxdiaz Yes, safety is so important when handling chemicals like these. I have now made the video on epoxy safety, it's my newest video. Be sure to check it out!

[@ncn1984]

Such a great video!!! Thank you for being so thorough. I’ve been wanting to get into this but didn’t realize some of the steps. 💕

[@Angel-rq3pi]

I would prob use a glitter spray paint...skip a step. Or, one color of glitter spray paint with Coordinating glitter of different color lol

[@kimberlypoulsencrafts]

Glitter spray paint doesn’t cover very well

[@amandamcnair1782]

I think that’s why she said with regular glitter aswell, like maybe 🤔 the glitter spray paint might mis with the 2nd coat 🤷‍♀️

[@Bemadabava]

I know I am late to the party but may I offer some money saving tips? Someone may have said this already, but if not here it is. Silicone, resin doesn’t stick to silicone. You get measuring cups, a bowl, and sticks . There are also silicone gloves. Also silicone mats. You may already know this. I work with resin often and this saves me so much money. Hope this helps someone much love and thanks

[@JenniferMaker]

Using silicon is a great tip!

[@Bemadabava]

Jennifer Maker I loved the video you did great I also subscribed! I hope I wasn’t too forward .. I just like to try to help . Much love keep up the good work

[@lianeplasch-williams7952]

Very helpful, and much needed to see a visual on how to make the tumbler

[@JenniferMaker]

It is helpful to actually watch something being done, isn't it? 😊

[@Realityof76]

You also need a respirator! Do your research please.

[@sherriewhite8409]

I agree...I am so tired of people doing videos with toxic material and not even mentioning it!

[@Realityof76]

Sherrie White - I know right!!

[@JenniferMaker]

Epoxy resin is toxic while it is curing, and safety precautions must be taken. Wear proper protective equipment (nitrile gloves, long sleeves, full-face respirator, and apron) and work outside or in a well-ventilated area. Do not allow epoxy resin to touch your skin or be inhaled through fumes or dust. If you get some on your skin, wash it twice well with soap and water. Always read the safety information!

[@JenniferMaker]

Yes, I know. :) A respirator is in this video -- I link to one in a card right on the video so people can get one.

[@amandamcnair1782]

Also u common sense instead of blaming the dig creators she said a few times not

[@vince0023]

Thank you Jenn! I am super excited and just purchased my Cricut Maker and soo soo excited and I immediately subscribed to your tutorials because you are so awesome at your presentations!!! Extremely satisfied from all videos ! I cant contain myself!!! Thank you thank you! (Wife-Sharleen-Mother of 4)

[@JenniferMaker]

Yay! Thank you! Thanks for watching!😊🌻

[@witnwi]

You could also allow the epoxy to drip down to the taped portion. The tape will be removed anyway. The football method would work by just planting the stick with the lid facing down.

[@JenniferMaker]

Thanks for the tip!

[@elizabethebert2220]

Love the tutorial! If you try your tape from the other direction you can use the rotation of the turner to help you take off the tape for a smoother removal :).

[@JenniferMaker]

Great tip! Thanks for watching!😊🌻