Applying K rend HP12 Base Coat Cement

Applying k rend base coat to brick face. We stuck the beads on using a grab adhesive then we used sbr to stop suction when applying the render. We done the side portion one day and the gable end the next day. We will be back in two weeks time to apply the silicone finish.
If this video was helpful or entertaining a subscribe would mean a lot to me. It gives me an indication that I am building an audience and that I am creating enjoyable content. It also encourages me to make more videos
Thanks
Keith & Ryan
#cementasmr #relaxing

[@derekwhorton4095]

Nice to see a Fellow crate user. Best hop up ever.

[@Ryan_Clarke_Plastering]

Can’t beat an old school crate. Hard to come by now grab one whenever I coke across one

[@edwardgibbs4272]

Beer crates over milk crates any day day .definatly old school 😂

[@Ryan_Clarke_Plastering]

@@edwardgibbs4272 we have a few old beer crates now. Hard to coke by these days

[@james1919]

The 1980s wants matey in the grey hoodie back

[@Ryan_Clarke_Plastering]

I want the 1980’s back so I can say I’ve lived through the 80’s😂

[@icharles4434]

I suppose it doesn't matter too much but I mesh on the second coat once the brickwork joints have been filled looks great, hope you film the silicone texture coat :D

[@Ryan_Clarke_Plastering]

Someone else said they do that too. Maybe we can try this next time. Yes I think I’ll try record the finish

[@icharles4434]

@@Ryan_Clarke_Plasteringhow did the topping go?

[@petemoring67]

Very strange 'Rubbing-Up' technique chaps ... Looked like hard work .... Did it pass the Sunshine/Headlight test?? ... 😉

[@Ryan_Clarke_Plastering]

It’s because we hit it too wet because we’re impatient hahaha yes was flat by the tile we we’re finished

[@benpatfield5471]

Bet that looked lovely in the sun 😂

[@Trekz86]

Pretty sure it'll get coloured topcoat?

[@Ryan_Clarke_Plastering]

@@Trekz86 yeah I posted a video of us top coating

[@kaimichael5444]

Nice work guys what size beads u use on this plz

[@Ireland-bc2gx]

Have used base coat and mesh systems for 20 +years here in the states not designed for scratch and double application It is a thin coat system with a top coat acrylic finish,that should have been s&c with a acrylic finish

[@Ryan_Clarke_Plastering]

This is how this system is supposed to be applicators mate they post videos on how to applicate it. Watch their videos. K Rend

[@markchambers9415]

great job gents.just subscribed.

[@Ryan_Clarke_Plastering]

Thanks mark we appreciate the subscribe👍🏻

[@G2020-]

Great? It's rough as toast

[@Ryan_Clarke_Plastering]

@@G2020- hahaha you’re so mad😂it’s not the finish you won’t see it what’s your problem. It’s flat that’s all that matters. I’ll make a video after we’ve put the silicone on just for you🤣

[@sean550]

Is that finish coat or what

[@rockroll456]

What the working time on the base coat once knock up please

[@Ryan_Clarke_Plastering]

Depends on time of the year and the background you’re applying to but this time of the year on brick face probably about 40 mins

[@lukethedukewatkins7441]

Why did you put orange mesh over on the angles at the corner of the windows on top of the area that was already meshed? Thanks in advance

[@Ryan_Clarke_Plastering]

We do this to prevent cracking on stress points. Just gives the weak spots that little bit more strength ;)

[@lukethedukewatkins7441]

@@Ryan_Clarke_Plastering things like that are key info man, thanks for sharing. Maybe in the future you could add little info text boxes as I'm sure people would love to know why you are doing certain things. Thanks again, its really appreciated!

[@Ryan_Clarke_Plastering]

@@lukethedukewatkins7441 that’s a good idea actually mate I might give that a go. Maybe one day I’ll just stop being a wimp and talk on camera hahaha

[@lukethedukewatkins7441]

@@Ryan_Clarke_Plastering all in good time man!! I'll be waiting

[@jaytravis1004]

I've never seen base coat done like this, always told let dry prime with same colour top coat apply top coat and rub up to finish job done?

[@Ryan_Clarke_Plastering]

Yeah this will still be primed and the top coat and rub up top coat too we just like a nice flat &smooth base coat too

[@danishhussain804]

Do you need to use a primer before putting on the silicone if so which one!

[@Ryan_Clarke_Plastering]

Yes you do mate. You can use a few different ones. You can either use Rendagrip or just do what we done and give it a good coat of sbr

[@kaimichael5444]

Nice work m8. But I bett cost a fortune in hp12. Try 6mm beads next time. Save an absolute fortune on render. Good work though

[@Ryan_Clarke_Plastering]

Cheers mate. Yeah we defo will look into 6mm next time. Hard work putting it on that thick

[@kaimichael5444]

Bett it was pal just 2 tight 3mm passes. Save an arm and a leg.

[@leegorman3329]

is that being topped with anything?

[@Ryan_Clarke_Plastering]

Yeah it is. Silicone render over the top hence why it’s not smooth finished

[@Lats2490]

Like the comments say use a diamond float bro, other method I do is let it set then I bar it back and float 👊🏻

[@Ryan_Clarke_Plastering]

Yeah we need a couple diamond floats for sure they look like they’re a god send

[@kaimichael5444]

Hi pal u eve use weber ocr in colder months can u still get it rubbed up same day. Liking weber ocr at mo?? Alsi do u I bar weber ocr back or just diamond float

[@gavinwilliams2240]

Whats that beung rolled onto brickwork

[@clarkey1977]

Looks like sbr

[@Ryan_Clarke_Plastering]

Sbr mate was just to stop suction

[@leegorman3329]

what size beads u on please?

[@Ryan_Clarke_Plastering]

I think these were 15mm mate not sure tho I can’t remember

[@70bondie]

Really good work. Why dont you go for a power float.

[@Ryan_Clarke_Plastering]

Yeah a power float is definitely goin to be dads next purchase I think mate. Makes life so much easier

[@balanceiseverything7338]

Why would you float the base coat? Its weakening the base coat and a lot of work. Should be able to use spatulas and make it flat and definitely use key coat to cover the brick first. 😢

[@mrgfromoxford8644]

So let me get this rite , that was a base coat ? Why rub down so much. There is definitely another coat going on yeah ?

[@Ryan_Clarke_Plastering]

Yeah it has to be rubbed up because it’s only a thin coat system going over the top. Google thin coat systems

[@chriscollins1704]

Nice brickwork. Shame

[@Ryan_Clarke_Plastering]

Yeah customer wanted it rendered to match the back but the brickwork was fairly bad up close to be honest

[@liamdaniels5978]

Wanna use a Refina diamond float to rub it up

[@Ryan_Clarke_Plastering]

Yeah we need to invest in a power float really too hard with the generic small floats

[@liamdaniels5978]

@@Ryan_Clarke_Plastering Refina do a small and large handheld diamond float aswell

[@Ryan_Clarke_Plastering]

@@liamdaniels5978 really. Maybe we’ll look into them mate thanks. We don’t do loads of render work so we don’t really know what tools are best

[@bluevanmani]

@@Ryan_Clarke_Plastering yeah get one mate I’ve just got one the dogs nuts so much quicker and gets it flatter. Out of interest what sealer are you using? We us rendergrip but to expensive. Also are you using 10mm or 6mm beads ? Good vid lads

[@Ryan_Clarke_Plastering]

@@bluevanmani will defo look into it mate. We used 10mm on this one. Glad you like the vid

[@Trekz86]

Why use bond in porous brick 🤦🏽

[@Ryan_Clarke_Plastering]

Bond?

[@Trekz86]

@@Ryan_Clarke_Plastering yes we call in bond Crete here in Australia. You guys call it PVA

[@Ryan_Clarke_Plastering]

@@Trekz86 well here in England that’s how it’s done and that’s how the manufacturers recommend it be done. Just abiding by the regulations

[@buster1474]

This must be a European way or beginners video

[@davidh2191]

Rubbing up is a bit of a mess

[@Sebastian-py7qo]

😂😂😂😂😂😂😂😂😂😂😂🎉

[@plipertyplap4899]

Need to go on a refresher coarse ......thats not hating just sound advice

[@G2020-]

Can tell these boys are skimmers that is not how you float hp12. Going to look dog rough when the sun gets on it

[@Ryan_Clarke_Plastering]

Good job it’s not the finish then😂it’s having silicone ontop

[@G2020-]

@@Ryan_Clarke_Plastering 1.5mm silicone is very unforgiving the basecoat has to be really flat to achieve the desired finish. This ain't flat.

[@Ryan_Clarke_Plastering]

@@G2020- correct. I can assure you it’s flat. I don’t show everything in my videos. I only show parts I can’t record everything it’s impossible to record everything we went over it twice. But I just admit the gopro didn’t do it many favours the videos at the end looked pants hahaha

[@G2020-]

You obviously don't do much if any rendering. You're not floating the wall with those little strokes of the float pal. If you handed someone a float who has never rendered before they would do it like that.

[@Ryan_Clarke_Plastering]

@@G2020- hahaha that’s because it was too wet ‘pal’🤦🏽‍♂️yeah we shouldn’t have floated it that early but hayho haters will only cry so much

[@neilrafferty2097]

Ruined a good house

[@jameshawe]

Turn off the radio!!! Fing awful

[@Ryan_Clarke_Plastering]

You can thank dad for that hahaha puts it right next to the bloody camera

[@jameshawe]

@@Ryan_Clarke_Plastering 😂😂😂