AR-15 - BOBRO Engineering ACOG Mount Installation

[@BobroEng]

Nice vid 👍

[@nsz85]

TOP RATED return to zero: cockedandlockedguns.com/top-rated-scope-mounts-adm-and-bobro/

[@dubglock2312]

do u save weight by going with that mount over factory acog mount?

[@MoxJet629]

+Dubglock23 Looks like it would add a little if anything.

[@bvitale35]

Were the screws on the colt loctite? Trying to take mine out and transfer to the Qd mount but the screws seem to be loctite. I don’t wanna keep turning and strip

[@thenotoriousvlog5986]

Looks good. Seems like it holds well too

[@nsz85]

+Jay Rod ROCK SOLID.

[@buddy9577]

HOW DO YOU ADJUST THE MOUNT

[@lunargentleman3750]

ASPHALT AND ARMORY you don’t it’s self adjusting

[@mikekarika2003]

have you ever tried using a Larue mount? very good quality and guaranteed remove and install and keep your zero as well.

[@nsz85]

Yes and the bobro mounts are superior.

[@Joe.dirt7909]

nsz85 How are they superior?

[@mrclem09]

Is the mount reversible so that the release lever is on the other side?

[@nsz85]

I believe so.

[@SouthCarolinaMike]

6 is a huge investment and it also says tons about your confidence in the product, great video as always.

[@sniperelitegaming476]

I live in Minnesota too I think I saw you at cabelas once

[@nsz85]

+Eric Reuvers That is definitely possible! Should have said hi :)

[@sniperelitegaming476]

+nsz85 I was kinda in shock I'm only 13 but I have a passion for firearms

[@tylermentink2276]

I have never had return to zero issues with my ADM mounts. I have a vortex 1-4 pst on one, a vortex pst 2.5-10 and a aim point h1. All have the same zero and I can rotate through my optics and put rounds in the same hole.

[@corruptionoutdoors]

How would you compare ADM?

[@nsz85]

These are far superior.

[@mozzberg590]

was that Vortex a 1x6 or 1x4

[@nsz85]

The two Vortex scopes are a 1-4 and a 2.5-10

[@CountryBoyPrepper]

Look who's back!!!

[@jeremythompson1199]

Would you go with these over the Geissele super precision for a scar 17?

[@Joe.dirt7909]

Geissele is the way to go......quick detach mounts are for gun reviews that need to swap optics fast.

[@Joe.dirt7909]

Great video.... I personally never been a big fan of quick release mounts for magnified optics.

[@jmicm13]

Any new vids coming?

[@nsz85]

+Justin M Just posted some today :)

[@Packcheese12]

how much of a problem was the larue mounts that you replaced it on your aimpoint pro?

[@sithyarael6807]

Just noticed your hands shack like mine do. My moms asked me about my hands shaking the other day and I never notice it yet others do. Just wondering if you are the same. I have never had any issues using my hands yet several people always notice my hands shake and my granddads did as well and he was an old school barber that used the straight razor to shave people.

[@michaelamaral7739]

8 videos this far 50 videos last year hope all is well Nate. Love you videos!

[@nsz85]

+michael amaral All good!

[@daveeydee87]

Nate I'm a big fan brother I've learned a lot from you and your videos. keep up the great work !!

[@nsz85]

+David Lamarre Thank you! I am happy I could help :-)

[@PaLEOjd]

When mounting a quality optic like Aimpoint or Trijicon, Bobro or LaRue Tactical is the way to go without question. Both top quality, both always return to zero and lock on rock solid. When you buy a top tier optic, get a top tier mount.....Great choice!

[@MrSeanc77]

whats your opinion on using fmj ammo like wolf vs. brass ammo in a 223 /556 does it hurt your ar 15...

[@trevarm556]

Thanks for the mention! Bobro mounts are awesome. I thought you were going to tell the story about how I dropped the nightforce on the cement and then put it back on the rifle.

[@nsz85]

Absolutely, brother. I left that part out because I didn't want to embarrass you ;-)

[@robertlarson5628]

Awesome video! It's because of this video I went and ordered the mount for my ACOG.

[@1RiderPale]

Thanks for the video! My Bobro mount will arrive next week for the ACOG I have, I'll have it on in no time.

[@huntersanders816]

nice . how much did you spend on the 308 mega arms though

[@orionfixr7713]

so, NSZ85 on you tube no longer exists? It was fun while it lasted.

[@nsz85]

I no longer exist? That's news to me!

[@josephlalis4706]

I have a question I have not been able to get answered, and I'm hoping you can. I bought my first AR since getting out of the military, I bought an Armalite Eagle 15, I knew at the time of purchase it was chambered in 223 Wylde with a 1 in 8 twist, but I can't find who the barrel was made by. It does have the initials WSM printed on it and I thought maybe that was the initials of the barrel making company. My question is are those the initials of the company, if so what company do they stand for? If not do you know who makes their barrels for them.?

[@KingTesticus]

wow. that's pretty sweet. but all the optics i "like" are as much as my entire rifle :-( i'm dubious about "cheaping it out" so i've decided not to decide. yet... but yeah, definitely adding Bobro to my list. thanks for posting, Thumbs Up!

[@husky701rider9]

I'm in the same boat

[@KingTesticus]

Ian Jacob and being in a boat i've noticed there are no orchards of money trees anywhere in sight! ;-) that's an "on land" thing!

[@husky701rider9]

+KingTesticus well I'm still in highschool for another semester and can only work a few nights a week for near minimum wage. Iv been working on my ar build for 2 years saving for the parts one at a time. It's almost done but there's no way I can afford optics for it yet.

[@KingTesticus]

Ian Jacob i started my AR build about 2 or 3 months ago pending the "executive" obozo orders regarding even more gun law restrictions. i was issued a battle rifle when i was in the military and qualified with it out to 400 meters. i missed only 1 out of 40, and it was one of those idiotic close targets! by the time i saw it and swung my rifle over to take aim, it popped back down and counted as a miss! i was very not pleased! i wanted a do-over, but the Army was like, be happy with a 39 out of 40, and said No. then a few years later i was done and out and that was the last time i fired this type of rifle. like i said, all obozo has to do is sneeze in the general direction of more gun control laws and executive orders and i'm like, holyphukk, time to get serious about that AR build i keep putting off for other things like a new couch, or a better water purification system, you name it, all manner of things present themselves as "better" and more logical things to spend money on. don't be discouraged! 2 years may seem like a long time, but think about this: that rifle is a Once In A Lifetime Thing. and could very well serve you and your descendants for many decades to come. as my late dad used to say: Cheap Shit Sucks. opt for quality.

[@RonJohnCo]

Hey nsz85, do you think you could make a video showing the different effects of blowback between the EraThr3 Ti charging handle and a regular non-ported charging handle, and maybe even the gas buster charging handle too, both with and without a suppressor? Your videos are always so well made I would like to see you show the differences.

[@MexicanNinja82]

The BOBRO mount on the aimpoint comp 4, could it be reversed? As always great video man.

[@nsz85]

I'm assuming it could be. I am not certain.

[@MexicanNinja82]

+nsz85 thanks

[@robkasahara9219]

Mr.NSZ which mount are you using for your PRO absolute or lower 1/3? Thanks for all your informative videos. If I am looking for any information concerning how to or parts installation I check you out first.

[@mcpocketsgarage2832]

Nice

[@frankesteinou7223]

I just discovered your channel. I viewed your series on building an AR15. This is some thing I can do because your videos were easy to follow. Can you tell me where I can buy all the tools needed. Do they come in kit form?

[@CountryBoyPrepper]

I've had similar luck with LaRue.

[@nsz85]

I have not.

[@johnk4588]

+Raul Danger LaRue is known for their mounts. Your experience may have been a fluke, out of spec upper or user error. Did you try contacting Larue?

[@n00g72]

+Raul Danger Did you hit it with your purse before or afterwards?

[@n00g72]

+Raul Danger I swap mine on/off every trip to go shoot or hunting, then I weep over the "gouges" in the rails of my LWRC, LaRues, and PWS ARs while listening the Justin Bieber's greatest hits. I'm surprised there's any rail left, all are almost completely warn through.

[@johnk4588]

+Raul Danger The clamps are steel but they don't damage the upper - no marks on mine. I guess if you bubba install it it may damage the upper. Either mount will work and most shooters will not be able to tell the difference, assuming there even is one. I can shoot under 1 MOA with the Larue mount and have had no problems whatsoever. No need to spend more IMO, and none of the posts on this page have provided evidence to the contrary.

[@smitty4699]

cost prohibitive. Cant justify it when there are other great mounts

[@nsz85]

There are great mounts out there but Bobro is the best. They aren't for everyone.

[@marq_patriot7958]

Love your channel, thanks for all your helpful vids... What is the model number of the latest bobro acog mount, so I don't get a older model by mistake on say Amazon or another site? Thanks Marc

[@nsz85]

B05-000-001 I believe. You can always call them as well.

[@orionfixr7713]

It was a question, Nate. Missing your face ! Come on and pop out a vid.!

[@hyperu2]

Looks too wide.

[@nsz85]

+HyperU2 Just as wide as the factory mount.

[@muffemod]

not a fan of their site or their mounts :(

[@dubglock2312]

I need to install enough money into my account to buy an acog

[@MrTommyboy9]

Why do you always seem to make me Spend more Money? Why? Lol

[@nsz85]

I hate my wallet too.