Arcade Repair Tips - Installing A Multicade Upgrade Kit (For Pac Man Cabinets)

[@Marcellus2011]

you guys need to do more videos keep up the good work

[@arcaderepairtips]

You could get your Super Cobra cabinet to use player 1 and player 2 start as buttons 1 and 2 but it would require rewiring your cabinet. The nice thing about this kit is that the JAMMA adapter takes care of the wiring for us.

[@DarthNinjaCode]

Great video. I learned so much with you guys. Thanks

[@arcaderepairtips]

The 60-in-1 that we have saves high scores but for some reason does not save the initials for the high scores. We don't know if they are all like that or just ours. We're pretty sure that the 60-in-1 runs the games in 640x480 interlaced resolution but you will need to contact JammaBoards to confirm this.

[@diegobanjocontrabajo]

Hi! i have 2 good important questions to do, at least for me. does the 60 in 1 save highscores? Does it run the games on their original resolutions? or everything is 640 x 480 interlaced on an arcade monitor? Thanks for your videos

[@troubydoo]

How do I wire the control panel so the 1P button is the fire button? I have a 60 in 1 and it works fine except for the button wiring....thank you.

[@edhebert]

I wired and grounded my power supply to the marquee light wires as suggested in the video, but am now getting a bit of a "herringbone" snowy interference that I do not get when connecting the same power supply directly to an outlet with a normal plug. My Ms PacMan has a three prong plug. Any suggestions?

[@kcoghill]

what abought games that have 2 buttons like super cobra, will player1 button fire & player 2 bombs or do you have to add a button thx.

[@ratodebanhado1]

awesome. thank you for show and teach us.

[@mikeserrecchia9283]

I have a 60-n-1 with lcd monitor. We had a power outage the other day and when it came back up, I get only sound, no video. There IS a light inside the monitor case. Can you please help me troubleshoot this issue?

[@wrad45]

Can you use the original power supply or would it ruin the board

[@m36games]

I installed the 60 in 1, it seems to be running (music and buttons work) but the screen is as if it is stretched beyond belief! It looks like a bunch of lines. Any clues on what could cause this?

[@bigboyjohnald9424]

Love Andys Apple Farm!

[@m36games]

@@bigboyjohnald9424 how did you find me here? Lol

[@bigboyjohnald9424]

@@m36games i’m putting together my cabinet and I recognized the name lol

[@tonynevarez3836]

Question. I have an coin operated old game/cabinet. It was set on top of a bar table and swivels. Can these type of upgrades be done on this type of unit . Currently has old games like pong. Horse racing, , trivia . Are game upgrades available for these type of units too? I currently have 4 or 5 square buttons on console. But will to change out to be able to play better games .. any advice is appreciated . Thank you

[@hueyfann1]

if i go this would i have to change dip switches, i have a Ms pacman and i have it on 5 lives and free play, do any othe dip switches need to be changed back

[@alexandermonday3017]

Does the 60-1 save high scores when you turn the power off?

[@arcaderepairtips]

Yes, the 60-in-1 board should save your high scores (if you have the high score saver dip switch 3 set to the ON position) BUT, in our experience, it doesn’t always save your initials.

[@alexandermonday3017]

Arcade Repair Tips thanks

[@justinmiller2749]

Help! I have 2 Pacman and 1 Ms Pacman cabinets. I just bought the Jamma 60 in 1 "Pacman kit". I have hooked the kit up in all 3 of my Pac cabinets, the 60 in 1 will not power up. I tested the 60 in 1 board in a jamma cabinet and it works, I also bought another power supply thinking I might have just got a bad one still nothing in any of the pac cabinets. I thought this was going to be a plug and play after reading directions and seeing the video, cant understand whats wrong. All three cabinets are standard midway Ms pacman/pacman cabinets...any ideas thanks

[@MrNiceHk]

Did you ever figure out what was wrong ?

[@joevazquez9151]

I just bought a 1981 Ms. Pac Man arcade and the Ms. Pac man is going very fast. How would I be able to put it back in regular speed. Thank you

[@delsarcade]

Your PCB has a speed chip installed in place of the normal ROM. You'd need to get a normal ROM and swap it out. However, you're probably better off buying a multi-pac from HighScoreSaves dot com. It has a menu to select, Pacman normal and fast, Ms. Pacman normal and fast, and more. Works with Pacman or Ms. Pacman boards.

[@MrNiceHk]

How do you exit the game with the original control panel ?

[@jamesrbrindle]

All 60 in 1 boards only save the top high score and no initials. Isn't there also a ms pac control panel with fire buttons. I would set the board to single game mode for one of these type cabs which i've done on my pac-man machine once as a temp measure. Its usually the 2114 RAM chips that go on these boards.

[@marksplender2000]

how did you turn -12 into -5?

[@marksplender2000]

Check your DIPS PEOPLE!

[@gan9e]

your mental using 60-in-1.. the cheap Chinese knock-off of another board made in the US, but today the best choice for anyone i believe is ArcadeSD (phoenix arcade - google is your friend) the Chinese are even doing a similar version, check out the videos for ArcadeSD on youtube, better menu, better controls, user updatability, quarterly release of new games, bit more expensive but you get what you pay for.