ARCCAPTAIN MIG 145 PRO review on tubing fabrication with flux core welding

[@scottsherwood8555]

I appreciate your point of view on the carrying strap for the machine, that makes a lot of sense and makes this machine very portable. I have a Millermatic 175 and it weighs 98.5 pounds, not very portable. I like that the Arccaptain is only 18 pounds! Very cool! Thank you for your teaching, knowledge of welding and the material that you’re working on. I learned the difference between hot and cold rolled steel and the different colors of them. Plus whether or not they have grease or mill slag on them. Excellent video! 👍🏻👍🏻

[@NBSWELDING]

Glad to hear you got some info out of the video...thanks for watching and commenting 👍

[@WV591]

Refreshing to see a pro using flux core on a job with excellent results.....

[@NBSWELDING]

👍 It's a good wire

[@joebaileygl1500]

I’ve been a welder fabricator for 30 yrs and I love this new technology. I love your videos. Great job

[@NBSWELDING]

Thanks 👍

[@JoeFarchaus]

I want to thank you for the content you post. I'm a farmer from New Hampshire and I often need to "farm fix" equipment and your site gives me useable pointers for how to fix a problem in get a weld that will hold. Too many sites focus on pretty weld beads or bend test pointers. While that has it's place, I'm never going to bend test anything. I'm going to weld the bracket and put it back on and go back to work! You are a practical guy with real world know how. Thanks again.

[@NBSWELDING]

Glad to hear ...thanks for watching and commenting

[@scottjune3554]

I don't think that I've ever heard a better or more understandable description of the science of welding methods. Great 👍 video

[@NBSWELDING]

Thanks 👍

[@lonniehall9006]

Love hanging out with you, and love how you explain everything. Kentucky

[@NBSWELDING]

Thanks for watching and commenting 👍

[@larryvollmar8763]

Whenever I run a machine on 110 I use 10ga cords on a 30a breaker. Works out to 300’. Great video!

[@NBSWELDING]

That's how the 120V on the Super Service Truck is rigged up...none of the wire in my shop is 12 guage though

[@scottsherwood8555]

I loved watching your video on this Arc Captain. This little machine rocks. You do really nice welds! Thanks for showing off the machine. I’d like to see this machine do stick welding too.

[@NBSWELDING]

More to come!

[@timothyhartley7986]

Arc captain is lucky to have your real working honest review. I would like to see miller or Lincoln knock on your door about reviewing there products. Thank as always cb.

[@NBSWELDING]

I'd love to hear from Miller or Lincoln....someday maybe 🤔

[@RaysLaughsAndLyrics]

The Captain did work well, and the strap is a fine idea. The video was excellent, as well as the presentation. I am most impressed with the cleanliness and organization of your workspace and the same for your workflow technique. Above all, you are a no-nonsense straight shooter in your evaluation and opinion concerning the Arc Captain 145. A demo of the tig capabilities of the 145 would be appreciated. All the best of health, long life, and prosperity to you and yours. 👍

[@NBSWELDING]

Noted ✅️...thanks for watching and commenting 😉

[@babalu1126]

Cracking me up. All that about calling it a mig, and you called it a mig several times. I get it, it’s the name. That little welder did great.

[@NBSWELDING]

Yea it drives me nuts

[@MrJohnyBoy00]

Great size for mobile fence jobs with a solar generator and the shoulder strap may just be the ticket. Thanks Again

[@NBSWELDING]

You bet

[@Brian_W.]

Commenting for the algorithm. Good job showing what the little thing can do.

[@NBSWELDING]

Thank you

[@erikslagter3231]

nice to have an in-depth video on this flux core machine

[@NBSWELDING]

More to come!

[@michaelbigelow367]

Great video CB. Impressive little machine. They are lucky to have you review there welding machines. I want to try that wire.

[@NBSWELDING]

It's good flux core...I have some of the larger .035" but haven't got to try that yet...looking forward to seeing how it does

[@michaelbigelow367]

@@NBSWELDING I will order some and see how it works.

[@Wrenchen-with-Darren]

Flux core welding has improved a lot. Looks nice.

[@NBSWELDING]

I think so too!

[@dont-want-no-wrench]

i bought the mig 130. really liking it for fluxcore

[@NBSWELDING]

Cool...appreciate ya letting us know...I was asking them about the 130 when they sent me this 145

[@francodeiuliis1562]

As always another great informative vid I’m very impressed with that little machine for the price point you can’t go wrong Thank you for your time sharing Cheers from Nova Scotia

[@NBSWELDING]

Thanks 👍

[@earlcavenaugh6459]

Great video. I feel the same way about these “MIG” welders that can’t mig weld. Gonna see if a spool of Arc Captain will fit in my Lincoln 135.

[@NBSWELDING]

Let us know...I think that ARCCAPTAIN wire will work great for ya 👍

[@eightursis]

NBS as usual. Keep up the great work, demo and information for all CB.

[@NBSWELDING]

👍

[@tomwaldschmidt8561]

Thank you CB! Great Job! I appreciate your time Sir!

[@NBSWELDING]

Thanks for watching and commenting

[@Blackopsmechanic338]

CB said, “it’s dumb”. 😂😂😂. Ain’t that the truth. 👍👍🇺🇸🇺🇸🇺🇸🇺🇸

[@NBSWELDING]

Yessir

[@JRPalak]

Thank you for explaining the differences between true MIG welding (gas) and Flux-Core.

[@NBSWELDING]

Very welcome

[@mig-k2164]

Great video like always. I didn't see any more porosity after you cleaned up the material. I'd watch you tig weld with it. One thing that I noticed about this machine that you didn't mention was that the fan isn't constantly running like most machines. That's kinda nice 👍. I'm going to consider this welder when my harbor freight titanium flux 125 takes a dive.

[@NBSWELDING]

Great point!

[@lonniehall9006]

Got to tell you, I got an old Lincoln they called the gas pump, and I’m getting it ready to weld. It has the silver crank on the front, and a dial across the bottom. Kentucky

[@NBSWELDING]

Nice 👍

[@lonniehall9006]

@@NBSWELDING have you ever used one? Ky.

[@NBSWELDING]

@@lonniehall9006 yes

[@kennethorton3661]

I have AR captain 200. You got that 145 that looks real awesome.

[@NBSWELDING]

I like my 200 too...used it alot...it's handled everything I've tried with it

[@smmaxey]

Fantastic video - very instructive. Never thought to carry the flux core machine on my shoulder - great idea. Let's Go Brandon ✌

[@NBSWELDING]

Right on... 👍

[@wdsracer]

Great review of an entry level welder. Thanks CB.

[@NBSWELDING]

Glad you enjoyed it

[@saginagar1632]

completely agree with your observation regading the name of a welder that can only do flux core welding as Metal Inert GAS (MIG)

[@NBSWELDING]

Thank you 👍....I'm afraid that the term has been used wrong by so many for so long that it's too late to turn it around but I hate it

[@JD-526]

I like to see what that machine can do with tig, just be nice to know. Thanks for filming this machine.

[@NBSWELDING]

You bet...another TIG request noted ✅️

[@Michael-qv5qo]

@@NBSWELDING does really good in tig i have a Arccaptain Mig 200 realy good machine only problem i have is trying to do some alumium welding

[@RogerChandler-vl5de]

I sorta like that Arc-Capptain 145. My Miller Multimatic 215 is a dual voltage unit, but I could see how a dedicated 120v machine could be an asset. Appreciate you running that thing thru it’s paces…I think I’ll chew on the decision of whether or not to pick one up.

[@NBSWELDING]

👍

[@cinchup11]

Great video. Thank you for the info about the welding tips.

[@NBSWELDING]

Glad it was helpful!

[@rickh9507]

Thanks man! got alot of info on flux core. Good shit brother

[@NBSWELDING]

Appreciate the support!

[@JoelSavoy-x4v]

Another real-world, on the job evaluation. Thank you! So tired of seeing bead on plate "tests". As a request, it would be cool to see how the 140 handles stick- 1/8" 7018, 7014, 6013. Does it have the guts? Will it do 6010/6011? Also, alot of guys do tig-tack before weld out. Test tig for giggles? Will stay tuned. 😊

[@NBSWELDING]

Noted...definitely will be trying stick...not sure yet if I'll hook up TIG on it or not...got 2 or 3 interested in seeing it TIG so far

[@tallyman15]

Great information on the miter corner gap.

[@NBSWELDING]

Glad it was helpful!

[@petermccuskey1832]

Super looking machine.

[@NBSWELDING]

Sure is!

[@JonesMetalCraft]

Thats a really handy little machine for sure. I see a lot of value in the carry strap actually.

[@NBSWELDING]

Me too

[@peetky8645]

comparing my harbor fright MIG 145(030) to my esab 350MPI(035) i found the esab much nicer on a medium sized flux core project because it has a 100% duty cycle whereas I was stopping a lot due to the 30% cycle of the HF145(scared to let the smoke out). I think the shoulder strap is a great idea.

[@NBSWELDING]

Good info...thanks for commenting

[@scottclover1349]

I always enjoy wathing your clips, thanks a bunch, much appreciated👍

[@NBSWELDING]

Glad to hear it

[@donanything6816]

Thanks for the video. Good job.

[@NBSWELDING]

Thanks for watching!

[@donanything6816]

@@NBSWELDING Anything on the 205?

[@sefaucon3839]

For me , what a great i formative vieeo !!!! So interesting and good teaching with proof along, No Bull Shit is right to say Way better than any school around here where i couldn "t get any good answer. They call themself scholl teachers ( bull shit ) i got more of you in 2 or 3 video than them in 1 year Thank You Sir !!!!!

[@NBSWELDING]

Thanks for watching and commenting 👍

[@alanmcclorey8914]

What a great tool that is.

[@NBSWELDING]

Yep 👍

[@michaelbigelow367]

Thanks!

[@NBSWELDING]

Thank you for your support 🙂 👍

[@PaulFarrell04]

Super thanks

[@NBSWELDING]

Thank you for your support 👍

[@rogertaylor8615]

I would watch you do the lift tig that little machine does a great job on the gate but you always do a great job on anything

[@NBSWELDING]

Thanks...another TIG interested noted ✅️

[@DavidGaskill-v1d]

Just got the mig 200 and love it.

[@NBSWELDING]

Yea the MIG 200 is impressive

[@jr-wj1ec]

Good info as usual CB Thanks

[@NBSWELDING]

You bet

[@dmanh2920]

Great content love your videos. Like to see some tig welding 👍

[@NBSWELDING]

Noted ✅️

[@perrydiehl7177]

Most people will never stick or tig with it but someone that does stuff on farm maintenance or in a packing plant that gets into stainless and power is a issue this could be a easy fix just to not need a super heavy cord or heavy rig pretty interesting little thing! I got to say it’s not something I’d use all the time but I definitely could have a use for it for sure I actually could have used it last night if I had one I’m actually kind of interested for real just for weird occasional stuff I run into. Hell my truck uses way more gas than my car and I don’t have to load my Engine drive to run over to my dads and tack something or extractor bolt definitely a useful tool could definitely have used it when I was doing maintenance work I used to need 110 tig a good bit on kitchen equipment

[@NBSWELDING]

Definitely handy

[@CentralIowaAudits]

NICE JOB- GREAT REVIEW !

[@NBSWELDING]

Thanks!

[@MrJohnyBoy00]

I just purchased the Arccaptain Flux Core 145 Pro to fix my brothers wrought iron fence. I have a Hobart Handler 140 MIG welder that I use but needed a portable flux core welder to use outside in the elements. Your recommendation means more than a flash in the pan Utuber's. Thanks

[@NBSWELDING]

Thank you....thanks for your support

[@johnwilliams8823]

I’d like to see you tig weld with it. Especially interested in thin aluminum like a boat. Great videos!

[@NBSWELDING]

TIG welding aluminum is done with AC welding current, continuous high frequency, and variable heat control that is usually adjusted while welding using a foot petal. The Mig 145 does not have that capability. The TIG welding that can be done with the Mig 145 is DC scratch start on steel and stainless steel. To AC TIG aluminum you'd need a machine like the ARCCAPTAIN TIG 200P

[@imadog131]

Love these videos. One thing I would like to know is what id your weld sequence on a frame that you need to keep square.

[@NBSWELDING]

I weld from one corner to an opposite corner

[@RickSchauer]

Great review I am very happy with my Arc Captain mig 200

[@NBSWELDING]

Yea I reviewed the MIG 200 a year ago and tried like hell to burn it up but it did everything I ask it to do and I am still using that same machine....good lil' welder

[@phildunne2632]

Looks good for field fab/repairs .

[@NBSWELDING]

I agree

[@klif_n]

Seems like a lot of those entry level flux core welders are quite similar. You can do a lot around the house with any of them. Just a handy thing to have on the workbench for that odd time you need it.

[@NBSWELDING]

Yes

[@markstanfield4345]

Awesome machine 👍🏻

[@NBSWELDING]

It sure is!

[@jasonchampion9932]

Thank you!👍🏼

[@NBSWELDING]

You bet!

[@yenerm114]

Imo it’s an Awesome lil machine 👌🏼 I didn’t know ya could tig w no argon, gota see that! 👌🏼🤘🏼🤘🏼

[@NBSWELDING]

You CANNOT TIG without argon or some type of shield gas...In the case with this lift arc TIG the gas must be connected to the torch...there is no gas solenoid in the ARCCAPTAIN MIG 145 but that DOES NOT mean that you can TIG without argon...I did not say that at all

[@peetky8645]

you can get tig torches with thumb switches to turn the gas on and off.

[@yenerm114]

@@NBSWELDING ooooo ok gotcha 👌🏼

[@catadjusterjim]

Excellent video! Do you use any particular welding spray to keep your table or workpieces free of spatter? Your table looks clean enough to eat off...

[@NBSWELDING]

I don't put anything on the table on purpose....I clean it with a 9" grinder laid flat down and polish it like I'm finishing concrete I spent years working in filthy unorganized shops as an employee welder...I always said one day when I get my own place it's gonna be organized and uncluttered...I see no point in fighting yourself for space to work in and if you can't find something when you need it then there is no point in owning it

[@GregoryWebb-x8h]

Hi, Thanks, interested in the PW 180 MIG!!!

[@NBSWELDING]

Check out the ARCCAPTAIN MIG 200 kzbin.info/www/bejne/fHe3nYmNmL6YnMUsi=IVQlGWyeKnbi3Ygy kzbin.info/www/bejne/bGXFnmaLpN6KbpIsi=ILtCKDaMiNBZs4nt

[@NBSWELDING]

For ARCCAPTAIN products use this link www.arccaptain.com/?ref=NBSWELDING Remember to enter promo code NBSWELDING5% to get 5% off on all products

[@jimfeaster4837]

Good video😊

[@NBSWELDING]

Thank you 👍

[@tsl7881]

They also threw in that magical marketing term: " Pro". I guess a pro could use this if he didn't want to hurt his back to go to a small job. For a buzz kill, you use the term GMAW and catch all the gases. CO2 is semi-inert and somewhat Active (a little carbon can get in the metal). When used by itself is often called MAG. You do use 100% inert Argon for MIG welding aluminum and TIG.

[@NBSWELDING]

👍

[@jfs63310]

Another excellent video!

[@NBSWELDING]

Glad you enjoyed it!

[@kenmen4493]

Great vid!

[@NBSWELDING]

👍

[@darrylwagar4144]

Hey CB, have you tried any power conditioners on the miller? They make RV surge protectors in the 30-50 amp range. It may help to smooth out the power spikes that prevent you from using the 200 on the miller. They are fairly cheap. Thanks for sharing

[@NBSWELDING]

I haven't tried any...haven't needed the TIG to run off of the generator either...the MIG 200 runs great off of the generator and now that I have a spool gun for it that's probably all I need...dunno...don't have time to mess with it...ARCCAPTAIN & Miller both told me the TIG 200P won't run off of the Trailblazer 302 so I haven't wasted time bothering with it since

[@doublehbar]

Great video

[@NBSWELDING]

Thanks!

[@Geezer661000]

good run down

[@NBSWELDING]

Thanks 👍

[@flexiteufels9686]

Algorithm push comment to support CB's Channel.

[@NBSWELDING]

Thank you

[@junderwood98]

I'm just starting out and learning how to weld. Do you believe the 145 would be good one to start with? Love the vids!!

[@NBSWELDING]

The 145 is great if that is all you can afford...it has limits because it runs only on 110V and may be more limited if you don't have a 110V 30amp circuit to plug it into If you can afford a MIG 200 then I'd recommend doing that...you'll need a 220V outlet to use all the power that the MIG 200 has but you'll be virtually unlimited on what you can do if you spend just a little more on the MIG 200. Watch my videos, like & comment....and when you buy use my link & promo code please...thank you kzbin.info/www/bejne/fHe3nYmNmL6YnMU kzbin.info/www/bejne/bGXFnmaLpN6KbpI kzbin.info/www/bejne/sJ6baa1-jJl7Zrs kzbin.info/www/bejne/sJ6baa1-jJl7Zrs kzbin.info/www/bejne/fn3Nk2N8epp1a6s kzbin.info/www/bejne/rWG3n5KvbrKefck kzbin.info/www/bejne/j2WQoH6Jis-fh6c kzbin.info/www/bejne/fJSWc59sj5trmpI kzbin.info/www/bejne/aIK0iZtqadKAh9k For ARCCAPTAIN products use this link www.arccaptain.com/?ref=NBSWELDING Remember to enter promo code NBSWELDING5% to get 5% off on all products For SIMDER products use this link www.ssimder.com/products/cut-50pro-pilot-arc-plasma-cutter?ref=NBSWELDING Remember to enter promo code NBSWELD to get 10% off on the Cut 50 Pro plasma cutter For T-shirts, cups, or coins send Tina an email request at [e-mail] If you are interested in trying the Thrive Supplements that Tina and I have been taking for the past 8 years then send Tina an email request for information at [e-mail] and include your cell phone number in the email. We can get you a sample of the products and possibly even a discount on your first order. nbswelding.thrive123.com/

[@GradyPerry-o2u]

Good job

[@NBSWELDING]

Thanks

[@MrTwistedTexan]

Nice!

[@NBSWELDING]

Thanks!

[@tdotw77]

Another fine video CB!👍🏻👌🏻🔩🔧🛠️ ✊🏻🇺🇲🦅🇺🇲✊🏻

[@NBSWELDING]

Thank you

[@cab8188]

Would you do a strength test to compare the 2 wires . Thanks Clayton ,always enjoy your "Do'sins !

[@NBSWELDING]

I'm sorry but likely won't...I don't have anymore Lincoln NR-211 and I can't afford to buy it just for that....that's $25 for wire I don't even want. I think ARCCAPTAIN wire is as strong as any...I think that if you have a failure using it then it's a problem besides the wire. Thanks for watching and commenting

[@Matt-ql6ox]

Thank you for your video!

[@NBSWELDING]

You bet!

[@juniorwhelchel6337]

I really appreciate how well u describe things to us viewers also is your helmet auto darkening or not

[@NBSWELDING]

I use an auto darkening lense...4-1/4"×2" solar no battery

[@bradmcintire8153]

Can you only do a single pass with that flux core with since its a gs?

[@NBSWELDING]

I'd run multiple passes if it were needed like in the case of thicker steel

[@bradmcintire8153]

Ok thanks I'm still learning didn't know how crucial it was

[@NBSWELDING]

👍

[@dont-want-no-wrench]

you are of course completely right about the term 'mig', but maybe we are just barking at clouds- maybe too late to correct.

[@NBSWELDING]

Yea it's too late...the term has been used wrong by so many for so long that I'm afraid we gotta live with it

[@tsl7881]

Got fuzzy when they came up with blends. Where would you draw the line. 75/25. But, if it uses flux wire and has no gas anything, it is definitely a flux core FCAW welder only. Since it came with a gas ready torch, I think they decided to delete the valve to make a lower cost machine. Could have called it Flux145.

[@NBSWELDING]

@tsl7881 exactly...it should be Flux145

This would be a nice light duty farm welder with a 4kw generator . No gas required .

[@NBSWELDING]

I'm looking forward to seeing how it runs off the generator

[@lobryant52]

Love the videos

[@NBSWELDING]

Thanks

[@mikehardin7086]

good job

[@NBSWELDING]

Thanks

[@MyBsquared]

What do you think of the Bestarc three in one mig 145 gas\gasless offered on amazon, also has lift tig\and stick. i am in Canada, so price can be a bit more. Great channel, advise and ideas thanks.

[@NBSWELDING]

I don't know anything about that particular Bestarc machine...never ran one...I reviewed a Bestarc plasma that worked well but when they contacted me about doing further reviews I told them that they would need to offer me an affiliate program like the other companies do and I guess they didn't want to do that so I haven't worked with them since then.

[@LeonardRoberts]

I would be interested to see how both the TIG and stick perform. How would you TIG without gas?

[@NBSWELDING]

You cannot TIG without gas...the gas must be connected to the torch

[@apollorobb]

I wanna see you Doozin some Scratch with that machine . Just to see how good it actually works. Ive done some with my 200 I'd like to see how it compares .

[@NBSWELDING]

Noted ✅️

[@edregister4530]

Hey CB, question when you tack the frame of the sign in the corners do you tack on the top inside corners then adjust for square and once square put another tack before welding out?

[@NBSWELDING]

I tack the outside corners with a gap in the fit..then get square and clamp it to the table...if your not working on a table you can also lay a piece of strong scrap material from one corner to the other and clamp or tack it to the frame to hold it. Then tack the inside.

[@neilheriot2361]

👍 for the rant.

[@NBSWELDING]

👍

Very good

[@NBSWELDING]

Thanks

[@zackerywimbish5579]

Could you please give me your recommendation on which one to get out of this machine or the MiG 200? I’m only going to be doing flux welding and stick welding…. Was wondering if the MiG 200 would be of any benefit over this machine if I only used it for flux wire and stick… Thank you kindly sir!

[@NBSWELDING]

The simple answer is that if you can afford to buy the MIG 200 then buy it....the MIG 200 is limitless in terms of power and DC welding processes. The MIG 145 is amazingly effective for its tiny size but your gonna be limited on power by its inability to use 220V current and most people don't have a 110V circuit that is 30 amp so they can't even use what limited power the 145 has.....so your limited on power by a smaller machine and then limited even more if you only have 15 amp or 20 amp circut breakers for your 110V power supply. I have done hours & hours of video on these machines...please watch the videos and decide for yourself....please like and comment on the videos kzbin.info/www/bejne/fHe3nYmNmL6YnMU kzbin.info/www/bejne/bGXFnmaLpN6KbpI kzbin.info/www/bejne/sJ6baa1-jJl7Zrs kzbin.info/www/bejne/sJ6baa1-jJl7Zrs kzbin.info/www/bejne/fn3Nk2N8epp1a6s kzbin.info/www/bejne/rWG3n5KvbrKefck kzbin.info/www/bejne/j2WQoH6Jis-fh6c kzbin.info/www/bejne/fJSWc59sj5trmpI kzbin.info/www/bejne/aIK0iZtqadKAh9k

[@NBSWELDING]

If you decide to buy please use my link to go to the ARCCAPTAIN site and enter my promo code at checkout For ARCCAPTAIN products use this link www.arccaptain.com/?ref=NBSWELDING Remember to enter promo code NBSWELDING5% to get 5% off on all products

[@zackerywimbish5579]

Thank you kindly sir for taking the time to respond! What a great response… I will definitely use your code and will also tell them how good of a job you are doing reviewing their products!

[@Cardiackid409-zr1ut]

Hello CB, I was wondering if you had any issues with the ground wire melting on any of the Arccaptian flux core welders that you have used.

[@NBSWELDING]

I burned up the ground on my MIG 200 but that was from running big sticks when I was testing the machine wide open with 3/16" 7014...it didn't burn clear in two until months later though

[@johnnavarro539]

great job

[@NBSWELDING]

Thanks

[@TheNicko773]

What Primeweld machine labeled MIG does not have a gas solenoid installed on it?

[@NBSWELDING]

I thought their MIG140 was without gas welding ability but I may be wrong...I just looked on the site and it looks like the MIG140 isn't even available now. Looks like the smallest Primeweld now is the 160 and it has MIG capability...I should have looked that up before I made that statement....looks like I was wrong saying that about Primeweld

[@jacksonroland7584]

Could be very useful

[@NBSWELDING]

I think so too

[@techninefan90]

When people talk about Mig they are usually talking about GMAW (short arc, spray, globular, pulse). But is gas shielded flux core technically “mig”?

[@NBSWELDING]

I'd say that as long as inert gas is being used then it can be called MIG...but I myself use the term "dual shield" when referring to the Outershield and Ultracore type wires just to be clear....I generally save the term "MIG" for when I am speaking about solid wires ran with gas

[@SFS13-01]

⁠@@NBSWELDINGExactly! I run a lot of dual shield and make it a point to inform customers that it’s NOT mig because mig really has a bad reputation for not being as strong. You and I both know, that if done correctly, MIG is a good process. That said, I still prefer dual shield when welding on structural jobs 3/16” thickness and above.

[@terrycapehart6303]

I don't know how to get to the promo code

[@NBSWELDING]

For ARCCAPTAIN products use this link www.arccaptain.com/?ref=NBSWELDING Remember to enter promo code NBSWELDING5%

[@terrycapehart6303]

@@NBSWELDING ok thanks

[@MyBsquared]

👍

[@NBSWELDING]

👍

[@oscarluegateret7134]

Satterfield Prairie

[@NBSWELDING]

Thanks

[@jellymonster13]

Do you have any kind of contract with ArcCaptain that prevents you from reviewing other brands of welders? Asking because there's a really cool welder I got from Simder and as a novice I think it's a really cool machine but i'd be interested to get your thoughts as an experienced welder. I was also wondering if you have any trick to keep your welding helmet from getting all clouded up by the smoke (not the right word but not really sure what else to call it) from flux core welding?

[@NBSWELDING]

I will be reviewing a Simder plasma cutter soon...if you want me to review a Simder welder let Simder know that ...maybe Simder will send me one

[@jellymonster13]

@@NBSWELDING The one that i've got is the 45050pro (2024). It does MIG (both steel and aluminum, HF TIG (with the option for pedal control), Stick, Flux core, and plasma cutting.

[@WindsorChristine-c1p]

Novella Stravenue

[@NBSWELDING]

Thanks

[@BachHugo-k3o]

Gleichner Ramp

[@NBSWELDING]

Thanks

[@HawthorneGriffith-e1b]

Buster Stravenue

[@NBSWELDING]

Thanks