Building a sign frame

Рет қаралды 2,189

NBSWELDING

Күн бұрын

Пікірлер: 66

@PaulDavis-r9d 2 ай бұрын

Pretty work, C.B. ! 👍🇺🇸👍🇺🇸👍🇺🇸

@NBSWELDING 2 ай бұрын

Thanks for watching! 🇺🇸

@cinchup11 2 ай бұрын

Great video, especially about the different welds. It will help me making my deer blind.

@NBSWELDING 2 ай бұрын

Glad to help

@JoelSavoy-x4v 2 ай бұрын

Nice job C.B. Another good instructional video. Good planning, execution, and explanation. This is American craftsmanship. More people need to watch, and learn the details. Thanks for sharing!

@NBSWELDING 2 ай бұрын

Thanks for watching and commenting 😉

@rogertaylor8615 Ай бұрын

You always make things look easy

@NBSWELDING Ай бұрын

👍

@kelvinpen3144 2 ай бұрын

I hate broken fasteners I’m dealing with a broken bolt on a thermostat housing on my truck I’ve welding nuts lots of lubrication just being stubborn 😡Awesome video as always

@NBSWELDING 2 ай бұрын

Have ya tried welding on a washer first then welding on the nut?

@kelvinpen3144 2 ай бұрын

@@NBSWELDING I have heard of welding on the washer first but never tried it The nut is holding for now and the bolt is starting move Thanks for the suggestion about the washer if the nut breaks off I’ll definitely give the washer trick a shot 😎👍

@kelvinpen3144 2 ай бұрын

@NBSWELDING I finally got the broken bolt out today .Wow

@petermccuskey1832 2 ай бұрын

Really nice presentation. As I have said before you need to be in a vocational school teaching. I have been welding for over 50 years and you present the job task in a beautiful manner.

@NBSWELDING 2 ай бұрын

👍

@jr-wj1ec 2 ай бұрын

Sign is looking good CB

@NBSWELDING 2 ай бұрын

Thank you

@Blackopsmechanic338 2 ай бұрын

Excellent fit up tips! 👍👍🇺🇸🇺🇸🇺🇸🇺🇸

@NBSWELDING 2 ай бұрын

Thanks 👍

@JasonJJasonJ 2 ай бұрын

Thanks for your learnin's

@NBSWELDING 2 ай бұрын

Glad ya got something out of it 🙂

@LightningFabrication 2 ай бұрын

Hey C.B., Nice job on the sign frame. Your explanation on cutting the miter corners 1/8" short to make a gap for penetration on the butt weld was great. I think the material used to make the sign is a product called Dibond Sign Board. It's two thin panels of aluminum bonded to a core of polyethylene. Be careful not to tighten the screws to tight. The screws could draw in the aluminum in causing big dents.

@NBSWELDING 2 ай бұрын

Thanks...your right about the sign material....I think I will get the screws in place with the impact gun but when I finally tighten them against the sign I'll do it carefully by hand with a ratchet or wrench

@SFS13-01 2 ай бұрын

When it comes to extracting broken bolts and screws. One thing that I’ve had to resort to, especially on broken taps on blind holes, is to blast the center out with the plasma cutter. Then, sometimes, you can knock it through with a punch, drill it the rest of the way out or even finish breaking it up with a small chisel or center punch. Not always pretty but, whatever works.

@NBSWELDING 2 ай бұрын

Right on

@michaelbigelow367 2 ай бұрын

Love that wire. I got me some. Great job!

@NBSWELDING 2 ай бұрын

Thanks 👍

@kaxtell281 2 ай бұрын

Stainless fasteners... Always end up break'n one or more... Good job on the extraction (insertion).

@NBSWELDING 2 ай бұрын

👍

@dont-want-no-wrench 2 ай бұрын

after watching you and a couple of other reviews, i bought one of those little arccaptain migs. it has been an awesome little machine and I find I pick it first for a lot of little jobs. So far have not needed to go over 60 amps on it, and that has been plenty of power for up to around 1/8 in. the auto whatever thing it has works really well. just set the amps and the electronics takes care of it.

@NBSWELDING 2 ай бұрын

They are awesome

@Privateparry 2 ай бұрын

Your a legend bro, love the Chanel

@NBSWELDING 2 ай бұрын

Thank you...stay tuned

@earlcavenaugh6459 2 ай бұрын

Nice work!

@NBSWELDING 2 ай бұрын

Thanks!

@Wrenchen-with-Darren 2 ай бұрын

It's going to be a nice sign.

@NBSWELDING 2 ай бұрын

👍

@darrylwagar4144 2 ай бұрын

Hey CB, nice job. Thanks for sharing.

@NBSWELDING 2 ай бұрын

You bet

@francodeiuliis1562 2 ай бұрын

Nice job Nice review Nice extraction Cheers from Nova Scotia

@NBSWELDING 2 ай бұрын

Thanks 👍

@stephenmeeks684 2 ай бұрын

I luv yer doozins.

@NBSWELDING 2 ай бұрын

👍

@timothyhartley7986 2 ай бұрын

Good one cb

@NBSWELDING 2 ай бұрын

👍

@babalu1126 2 ай бұрын

CB, as one who works with stainless every day. The quality of stainless is absolute garbage. Yes I know there are different types, 304,316,308. It doesn’t matter, as soon as it get hot at all it galls. Great looking sign.

@NBSWELDING 2 ай бұрын

Thank you 👍

@alanmcclorey8914 2 ай бұрын

great job

@NBSWELDING 2 ай бұрын

Thanks

@diveunder 2 ай бұрын

CB do you put the weld from the tube being manufactured on the back side. So you don’t have to try and drill through it?

@NBSWELDING 2 ай бұрын

I try...but it's usually not a problem either way

@MyBsquared 2 ай бұрын

👍

@NBSWELDING 2 ай бұрын

👍

@sefaucon3839 2 ай бұрын

Good work CB question for you I am a new welder = is flux core weld as strong as mig weld. ??? 2) i noticed that you have many welders in Your shop, does that means that i will have many machines too ???? I have now a lincould 140 flux core and capacity to do mig Thanks. in advance

@NBSWELDING 2 ай бұрын

Flux core is just as strong as MIG...no type of welding is stronger than any other when each are used for their purpose. I bought most of my machines when I was welding for the drilling industry and I needed the write off to reduce my tax burden...dunno if you really need to do that...depends if you ever get in that position or not.